Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

AS 1228-2006

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Pressure equipment - Boilers

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

23-05-2024

Published date

18-12-2006

Preview

Specifies requirements for materials, design, construction, inspection and testing boilers as defined in AS/NZS 1200. It specifically applies to the design and construction of boilers, including superheaters, reheaters and economizers. Guidance is also provided regarding locomotive and other heritage boilers, and the design of blowdown vessels.

Committee
ME-001
DocumentType
Standard
ISBN
0 7337 7907 7
Pages
268
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes
UnderRevision

This Standard sets out requirements for materials, design, construction, inspection and testing of boilers as defined in AS/NZS 1200.NOTE: The Scope of this Standard covers requirements for cast iron in addition to welded boilers inclusive of vapour-generating and hot fluid units subject to internal vapour or liquid pressure. Other forms of construction should be by agreement between the parties concerned.This Standard specifically applies to the design and construction of boilers including superheaters, reheaters and economizers.It also applies to all pressure parts containing fluid up to and including the valves separating the pressure parts from - (a) steam piping to and from other equipment;(b) water piping to and from other equipment;(c) drain piping;(d) the surrounding atmosphere, except that for safety valves, their vent piping to the atmosphere is also covered; and(e) for equipment such as reheaters which may not incorporate valves at their supply and return connection points, the Standard applies to the equipment included between the inlet to the inlet header and the outlet from the outlet header of such equipment.This Standard also provides guidance on locomotive and other heritage boilers, and on the design of blowdown vessels.

First published in Australia in part as AS B31-1931.AS CB1 first published 1932.Redated 1932.Redated 1939.Second edition 1942.Redated 1950.AS CB1.5 first published 1951.AS CB1-1950 redated 1952.AS B31-1931 incorporated into AS CB1-1952 as Amendment.AS CB1-1952 redated 1954.AS CB1.5-1951 redated 1954.AS CB1-1954 revised and redesignated in part as AS CB1.1-1962 and AS 1228-1972.AS CB1.5-1954 revised and redesignated in part as AS 1228-1972.AS CB1.1-1962 revised and redesignated as AS 1797-1975 and AS 1797-1978.Second edition AS 1228-1980.Third edition AS 1797-1981.Third edition AS 1228-1984.Fourth edition AS 1797-1986.Fourth edition AS 1228-1990.AS 1797-1986 and AS 1228-1990 revised, amagamated and designated AS 1228-1997.Sixth edition 2006. Originated as part of AS CB1-1932. Previous edition AS 1228-1997. Sixth edition 2006.

AS 1391-2007 Metallic materials - Tensile testing at ambient temperature (Reconfirmed 2017)
AS 2291-2007 Metallic materials - Tensile testing at elevated temperatures
AS 1732-1997 Fusible plugs for boilers
AS 1110.1-2000 ISO metric hexagon bolts and screws - Product grades A and B - Bolts
AS 1112.3-2000 ISO metric hexagon nuts - Product grade C
AS/NZS 4481:1997 Pressure equipment - Competencies of inspectors (Reconfirmed 2016)
AS 4458-1997 Pressure equipment - Manufacture (Reconfirmed 2016)
AS/NZS ISO 9001:2000 Quality management systems - Requirements
AS 4041-2006 Pressure piping (Reconfirmed 2016)
AS 60947.4.2-2004 Low-voltage switchgear and controlgear Contactors and motor-starters - A.C. semiconductor motor controllers and starters
AS 4037-1999 Pressure equipment - Examination and testing (Reconfirmed 2016)
AS 1796-2001 Certification of welders and welding supervisors (Reconfirmed 2016)
AS/NZS 3678:1996 Structural steel - Hot-rolled plates, floorplates and slabs
AS 3998-2006 Non-destructive testing - Qualification and certification of personnel
AS 1271-2003 Safety valves, other valves, liquid level gauges and other fittings for boilers and unfired pressure vessels (Reconfirmed 2016)
AS 1170.4 SUPP 1-1993 Minimum design loads on structures (known as the SAA Loading Code) Earthquake loads - Commentary (Supplement to AS 1170.4-1993)
AS 1112.2-2000 ISO metric hexagon nuts Style 2 - Product grades A and B
AS/NZS 1200:2000 Pressure equipment
AS 1170.4-2007 Structural design actions Earthquake actions in Australia (Reconfirmed 2018)
AS 1210-1997 Pressure vessels
AS 3920.1-1993 Assurance of product quality Pressure equipment manufacture
AS 1112.4-2000 ISO metric hexagon nuts Chamfered thin nuts - Product grades A and B
AS 2528-1982 Bolts, studbolts and nuts for flanges and other high and low temperature applications
AS 60947.4.1-2004 Low-voltage switchgear and controlgear Contactors and motor-starters - Electromechanical contactors and motor-starters
AS/NZS 3000:2000 Electrical installations (known as the Australian/New Zealand Wiring Rules)
AS 1391-2005 Metallic materials - Tensile testing at ambient temperature
AS 2129-2000 Flanges for pipes, valves and fittings (Reconfirmed 2016)
AS/NZS 1170.2:2002 Structural design actions Wind actions
AS 1074-1989 Steel tubes and tubulars for ordinary service (Reconfirmed 2018)
AS 2074-2003 Cast steels
AS 2593-2004 Boilers - Safety management and supervision systems (Reconfirmed 2016)
AS/NZS 3992:1998 Pressure equipment - Welding and brazing qualification
AS 1210 SUPP 1-1990
AS 3892-2001 Pressure equipment - Installation (Reconfirmed 2016)
AS/NZS 3679.2:1996 Structural steel Welded I sections
AS 3990-1993 Mechanical equipment - Steelwork (Reconfirmed 2016)
AS 1710-2007 Non-destructive testing - Ultrasonic testing of carbon and low alloy steel plate and universal sections - Test methods and quality classification (Reconfirmed 2017)
AS/NZS 3679.1:1996 Structural steel Hot-rolled bars and sections
AS 1170.4-1993 Minimum design loads on structures (known as the SAA Loading Code) Earthquake loads
AS 1112.1-2000 ISO metric hexagon nuts Style 1 - Product grades A and B
AS 4942-2001 Pressure equipment - Glossary of terms (Reconfirmed 2016)
AS 2291-1979 Methods for tensile testing of metals at elevated temperatures
AS/NZS ISO 17020:2000 General criteria for the operation of various types of bodies performing inspection
AS ISO 1000-1998 The international system of units (SI) and its application
AS 1110.2-2000 ISO metric hexagon bolts and screws - Product grades A and B - Screws
AS 3873-2001 Pressure equipment - Operation and maintenance
AS 1710-1986 Non-destructive testing - Ultrasonic testing of carbon and low alloy steel plate - Test methods and quality classification
AS 1548-1995 Steel plates for pressure equipment
AS/NZS ISO 3834.1:1999 Quality requirements for welding - Fusion welding of metallic materials Guidelines for selection and use

AS/NZS 1596:2002 The storage and handling of LP Gas
AS 1470-1986 Health and safety at work - Principles and practices
AS/NZS 3992:1998 Pressure equipment - Welding and brazing qualification
AS 2593-2004 Boilers - Safety management and supervision systems (Reconfirmed 2016)
AS 3892-2001 Pressure equipment - Installation (Reconfirmed 2016)
AS 3961-2005 The storage and handling of liquefied natural gas
AS 1796-2001 Certification of welders and welding supervisors (Reconfirmed 2016)
AS 1210-2010 Pressure vessels (Reconfirmed 2021)
AS/NZS 1200:2000 Pressure equipment
AS 2865-2009 Confined spaces
AS 4041-2006 Pressure piping (Reconfirmed 2016)
AS 4037-1999 Pressure equipment - Examination and testing (Reconfirmed 2016)
AS/NZS 2865:2001 Safe working in a confined space
AS 3873-2001 Pressure equipment - Operation and maintenance
AS 3533.2-2009 Amusement rides and devices Operation and maintenance
AS 3920.1-1993 Assurance of product quality Pressure equipment manufacture
AS 3533.1-2009 Amusement rides and devices Design and construction
AS/NZS 3788:2006 Pressure equipment - In-service inspection (Reconfirmed 2017)
AS/NZS 1596:2008 The storage and handling of LP Gas
AS 3857-1999 Heat exchangers - Tubeplates - Method of design (Reconfirmed 2016)
AS 1210-1997 Pressure vessels
AS 2780-2003 Refractories and refractory materials - Glossary of terms (Reconfirmed 2013)
AS/NZS 1596:2014 The storage and handling of LP Gas

View more information
$338.44
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more