Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

SAE AMS 2488 : 2000

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

ANODIC TREATMENT - TITANIUM AND TITANIUM ALLOYS SOLUTION PH 13 OR HIGHER

Available format(s)

Hardcopy , PDF

Superseded date

25-09-2019

Language(s)

English

Published date

01-01-2000

DocumentType
Standard
Pages
8
PublisherName
SAE International
Status
Superseded
SupersededBy

MIL-DTL-32371-8 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 90 Degree Elbow, Bulkhead
MIL-DTL-32460-3 Base Document:2013 FITTING, ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS MALE
MIL-DTL-32480-1 Base Document:2014 Fitting, Adapter, Straight, Hydraulic and Pneumatic, Flareless Male to ORFS Male
MIL-DTL-32372-4 Revision A:2017 Fitting, Adapter, Straight, Hydraulic and Pneumatic, NPTF Male to ORFS Bulkhead
MS51819 Revision E:1987 ADAPTER, STRAIGHT, PIPE TO TUBE MALE PIPE END, FLARELESS TYPE, HYDRAULIC
MS51510 Revision D:2017 TEE, TUBE, 37 DEGREE FLARED
MS51525 Revision B:1988 FITTINGS, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, STEEL; ADAPTER, STRAIGHT, TUBE TO BOSS, O-RING, 37 DEGREE FLARED
MS39210 Revision K:2018 NUTS, TUBE COUPLING - SAFETY SLEEVE COMPRESSION TYPE
MIL-DTL-52471-10 Revision B:2008 HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE-TYPE, TYPE 100R12 FOUR-SPIRAL-WRAP REINFORCEMENT HOSE
MIL-DTL-52525-35 Revision B:2008 FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, 45 DEGREES BENT TUBE
MIL-DTL-32480-5 Base Document:2014 Fitting, Adapter, 45 Degrees Elbow, Hydraulic and Pneumatic, Flareless Male to ORFS Bulkhead
MS51814 Revision E:1987 NIPPLE, TUBE, BULKHEAD, REGULAR HEX, FLARELESS TYPE, HYDRAULIC
MIL-DTL-32371-10 Base Document:2012 Fittings, Hydraulic Tube, Sleeve, Double Angle
MIL-DTL-32371-4 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Tee, Spherical on Branch
MIL-DTL-52525-10 Revision D:2011 Fittings, Hose, Screw-on to 4-Bolt Split-Flange, Straight
MIL-DTL-32372-12 Revision A:2017 Fitting, Adapter, Tee, Hydraulic and Pneumatic, NPTF Male on Branch to ORFS Male Run to Run
MIL-DTL-83796-16 Revision A:2010 HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, INTERNAL SUPPORT COIL, FIELD ATTACHABLE END FITTINGS, FLARELESS TO FLANGE
MS51519 Revision C:2017 NIPPLE, TUBE, LARGE HEX, FOR USE WITH O-RING, 37 DEGREE FLARED
MIL-DTL-52525-7 Revision D:2011 FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE, SHORT DROP
AN915 Revision 14:2015 ELBOW, PIPE, 45 DEGREES
MIL-DTL-32464-6 Base Document:2013 Male Adapted, Union Cross, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 37 Degrees Spherical on Branch, 1500-3000 PSI
MIL-DTL-32480 Base Document:2014 Adapter, Hydraulic and Pneumatic, Flareless Tube Fitting to ORFS Connectors, 1500 to 3000 PSI and Minus 65 Degrees Fahrenheit to Plus 250 Degrees Fahrenheit, General Specification for
MIL-DTL-32464-1 Base Document:2013 Male Adapter, Straight, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 1500-3000 PSI
MIL-DTL-32464-12 Base Document:2013 Male Adapter, Tee, 37 Degrees Spherical to ANPT, ANPT on Branch, 1500-3000 PSI
MS39199 Revision G:2012 NIPPLE, TUBE-SAFETY SLEEVE COMPRESSION TYPE, BULKHEAD MOUNTING
MIL-DTL-52525-32 Revision A:2008 FITTINGS, HOSE, REINFORCED HYDRAULIC HOSE AND CLAMP-HALVES: FIELD ATTACHABLE (REUSABLE), SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 45 DEGREES BENT TUBE, FOR USE WITH TYPE 100RE FOUR-SPIRAL-WRAP REINFORCEMENT HOSE
MS51534 Revision A:1979 REDUCER, TUBE, 37 DEGREE FLARED
MS51811 Revision E:1987 TEE, TUBE, FLARELESS TYPE HYDRAULIC
MIL-DTL-52525-44 Base Document:2008 FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 45 DEGREES BENT TUBE
MIL-DTL-32480-6 Base Document:2014 Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, Flareless, Male to ORFS Bulkhead
MIL-DTL-32372-8 Revision A:2017 Fitting, Adapter, 45 Degree, Hydraulic and Pneumatic, NPTF Male to ORFS Female Swivel
MIL-DTL-32372-9 Revision A:2017 Fitting, Adapter, 90 Degree, Hydraulic and Pneumatic, NPTF Male to ORFS Female Swivel
AN849 Revision 13:2015 NIPPLE, HOSE
AN838 Revision 9:2011 Elbow, Tube to Hose, 90 Degrees
MIL-DTL-52525-1 Revision D:2011 Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, Straight, SAE-J516 Type, for Assembly with SAE-J517, Type 100R2 Hose
MS51501 Revision C:2016 NIPPLE TUBE, REGULAR HEX, 37 DEGREE FLARED, SHORT
MS51528 Revision B:1988 FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, STEEL; ELBOW, TUBE TO BOSS, 45 DEGREE, O-RING, 37 DEGREE FLARED
MIL-DTL-52525-43 Base Document:2008 FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, STRAIGHT
MIL-DTL-32372-7 Revision A:2017 Fitting, Adapter, Straight, Hydraulic and Pneumatic, NPTF Male to ORFS Female Swivel
MS51816 Revision E:1987 ADAPTER, STRAIGHT, PIPE TO TUBE, FEMALE PIPE END, FLARELESS TYPE, HYDRAULIC
MIL-DTL-32371-3 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 90 Degrees Elbow
MIL-DTL-52525-11 Revision C:2008 FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, 45 DEGREES BENT TUBE
MS51521 Revision C:2017 ELBOW, TUBE, 90 DEGREE, SWIVEL, 37 DEGREE FLARED
MIL-DTL-32372-6 Revision A:2017 Fitting, Adapter, 90 Degree Male, Hydraulic and Pneumatic, NPTF to ORFS Bulkhead
MIL-DTL-32371-6 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Nipple Tube, Regular Hex, Long
MIL-DTL-32372 Revision A:2016 Fitting, Adapter, Hydraulic and Pneumatic, NPTF to ORFS Connectors, 1500 to 3000 PSI and -65°F to 250°F
14/30310863 DC : 0 BS EN 4833 - AEROSPACE SERIES - PIPE COUPLING 24 DEGREE CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING - FLARED END - INCH SERIES - WITH EXTRA FINE THREAD PITCH
AN815 Revision 10:2015 UNION - FLARED TUBE
MS51509 Revision D:2017 ELBOW, TUBE, 45 DEGREE, BULKHEAD, 37 DEGREE FLARED
MS51524 Revision C:2017 TEE, TUBE TO SWIVEL, SWIVEL ON BRANCH, 37 DEGREE FLARED
MS51502 Revision C:2016 NIPPLE TUBE, REGULAR HEX, 37 DEGREE FLARED, LONG
MIL-DTL-52525-40 Revision B:2008 FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, STRAIGHT
MS51514 Revision D:2017 TEE, PIPE TO TUBE, FEMALE PIPE ON RUN 37 DEGREE FLARED
MS51529 Revision B:1988 FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, STEEL; TEE, TUBE TO BOSS, BOSS ON BRANCH, O-RING
AN 6270 : 0010 HOSE ASSEMBLY - DETACHABLE SWIVEL FITTING, LOW PRESSURE
AN846 Revision 9:2013 ELBOW, HOSE, 45 DEGREES
MS51532 Revision B:1988 FITTING, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, STEEL; CAP, TUBE, 37 DEGREE FLARED
MIL-DTL-32372-2 Revision A:2017 Fitting, Adapter, 45 DegreesElbow, Hydraulic and Pneumatic, NPTF Male to ORFS Male
MIL-DTL-32480-7 Base Document:2014 Fitting, Adapter, Straight, Hydraulic and Pneumatic, Flareless, Male to ORFS, Female Swivel
MS51520 Revision C:2017 NIPPLE, TUBE, BULKHEAD, 37 DEGREE FLARED
MIL-DTL-83796-7 Revision D:2014 HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARELESS TO FLANGE
ASTM F 3042 : 2013 Standard Specification for Nonferrous Hex Socket, Slotted Headless, and Square Head Set Screws
MIL-DTL-52471-1 Revision C:2008 HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE-TYPE, TYPE 100R1, SINGLE-WIRE BRAIDED REINFORCEMENT HOSE
MIL-DTL-52525-6 Revision C:2008 FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 45 DEGREES BENT TUBE
MS51507 Revision D:2017 ELBOW, TUBE, 90 DEGREE, 37 DEGREE BULKHEAD, FLARED
MS51516 Revision C:2017 TEE, BULKHEAD ON RUN 37 DEGREE FLARED
MS51508 Revision D:2017 ELBOW, PIPE TO TUBE, 45 DEGREE, MALE PIPE END, 37 DEGREE FLARED
MIL-DTL-32371-9 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Tee, Bulkhead, Spherical on Run
MIL-DTL-52525-36 Revision B:2008 FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 90 DEGREES BENT TUBE
MIL-DTL-52525-15 Revision C:2008 FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, 90 DEGREES BENT TUBE
PREN 4832 : DRAFT 2017 AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING AND RING-LOCKED FITTING-REDUCER - INCH SERIES - TECHNICAL SPECIFICATION
SAE J 2295 : 2016 FASTENER PART STANDARD - CAP SCREWS, HEX, HEAVY HEX AND HEAVY HEX STRUCTURAL BOLTS, AND HEX NUTS (INCH DIMENSIONED)
MIL-S-45909 Revision C:1989 STUD, LOCKED IN - RING LOCKED SERRATED
MIL-DTL-1222 Revision J:2000 STUDS, BOLTS, SCREWS AND NUTS FOR APPLICATIONS WHERE A HIGH DEGREE OF RELIABILITY IS REQUIRED; GENERAL SPECIFICATION FOR
AN924 Revision 14:2018 NUT, TUBE, BULKHEAD AND UNIVERSAL FITTING
MIL-DTL-32460-8 Base Document:2013 FITTING, ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS, FEMALE SWIVEL
SAE AS 4841 : 2017 FITTINGS, 37 DEGREES INTERNAL FLARE, FLUID CONNECTION, PROCUREMENT SPECIFICATION
AN841 Revision 7:2013 ADAPTER - HOSE TO FLARED TUBE
MIL-DTL-32464-7 Base Document:2013 Male Adapter, 45 Degrees Elbow, Bulkhead, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 1500-3000 PSI
MS39207 Revision H:2018 Elbows, Tube - Safety Sleeve Compression Type, 90 Degree
MIL-DTL-32464-2 Base Document:2013 Male Adapter, 45 Degrees Elbow, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 1500-3000 PSI
SAE AS 4444 : 2013 FITTINGS, 24 DEGREE CONE FLARELESS, FLUID CONNECTION, 5000 PSI
MIL-DTL-83796-6 Revision D:2014 HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARE TO FLANGE, WITH LOCKWIRE HOLE
MIL-DTL-83796-14 Revision A:2010 Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flare to Flange
MIL-DTL-32464-4 Base Document:2013 Male Adapter, Tee, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 37 Degrees Spherical on Branch, 1500-3000 PSI
BS ISO 7169:2014 Aerospace. Separable tube fittings for fluid systems, for 24° cones, for pressures up to 3 000 psi or 21 000 kPa. Procurement specification, inch/metric
MIL-DTL-32464-8 Base Document:2013 Male Adapter, 90 Degrees Elbow, Bulkhead, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 1500-3000 PSI
AN844 Revision 13:2013 ELBOW - PIPE TO HOSE, 45 DEGREES
MIL-DTL-52525-13 Revision C:2008 FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE STRAIGHT
MIL-DTL-32464 Revision A:2017 FITTINGS, ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES SPHERICAL TO ANPT CONNECTORS, 1500 TO 3000 PSI, GENERAL SPECIFICATION FOR
MIL-DTL-32464-10 Base Document:2013 Male Adapter, Long, Nipple Tube, Hydraulic and Pneumatic Tube, Long Hex, 37 Degrees Spherical to ANPT, 1500-3000 PSI
MIL-DTL-32371 Base Document:2012 Fittings, Adapter, Hydraulic and Pneumatic, Spherical to ORFS Connectors, 1500 to 3000 PSI, General Specification for
MIL-DTL-32460-7 Base Document:2013 FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS, FEMALE SWIVEL
MIL-DTL-32460-5 Base Document:2013 FITTING, ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS BULKHEAD
MIL-DTL-32464-5 Base Document:2013 Male, Adapter, Nipple Tube, Hydraulic and Pneumatic, Regular Hex, 37 Degrees Spherical to NPTF, 1500-3000 PSI
SAE AS 5958 : 2017 FITTINGS, AXIALLY SWAGED TUBE WITH FLARELESS SEPARABLE, FLUID SYSTEM FOR OPERATING PRESSURES UP TO AND INCLUDING 5080 PSI (35 000 KPA), SPECIFICATION FOR
SAE AS 18280 : 2017 FITTINGS, 24 DEGREES CONE FLARELESS, FLUID CONNECTION, 3000 PSI
SAE AS 1701 : 2017 LUBRICANT, SOLID FILM
MIL-DTL-83796-18 Revision A:2010 Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flange to Flange
MIL-DTL-52525-5 Revision D:2011 Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, Straight
MIL-DTL-52525-34 Revision B:2008 FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, STRAIGHT
MIL-DTL-52525-2 Revision C:2008 Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, 45 Degree Bent Tube
14/30310866 DC : 0 BS EN 4836 - AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREE CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING REDUCER- FLARED END - WITH EXTRA FINE THREAD PITCH - INCH SERIES
MIL-DTL-18866 Revision J:2015 Fittings, Hydraulic Tube, Flared, 37 Degree and Flareless, General Specification for
MS39202 Revision G:2012 ELBOWS, PIPE TO TUBE - SAFETY SLEEVE COMPRESSION TYPE, 90 DEGREE, MALE PIPE END
MS39201 Revision G:2012 NIPPLE, TUBE-SAFETY SLEEVE COMPRESSION TYPE
MIL-DTL-83796-15 Revision A:2010 Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flare to Flange, with Lockwire Hole
MIL-PRF-46010 Revision H:2013 LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING NATO CODE S-1738
MIL-DTL-32460-1 Base Document:2013 FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS MALE
MS20762 Revision D:2016 ELBOW, FLARED TUBE, FLANGED, SWIVEL, 90 DEGREES
MS39324 Revision C:2017 ADAPTER, 37 DEGREE, FLARE TO 'O' RING BOSS, 45 DEGREE FLARE
MS51842 Revision E:2017 ELBOW, TUBE TO BOSS 45 DEGREE, O-RING, FLARELESS TYPE, HYDRAULIC
MIL-DTL-32460-6 Base Document:2013 FITTING, ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS BULKHEAD
MIL-DTL-32460 Revision A:2017 ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE TUBE FITTING TO ORFS CONNECTORS, 1500 TO 3000 PSI AND -65 DEGREES F TO 250 DEGREES F, GENERAL SPECIFICATION FOR
MIL-DTL-83796-5 Revision D:2014 HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARE TO FLANGE
MIL-DTL-83798 Revision D:2008 FITTING, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR
MIL-DTL-52525-38 Revision B:2008 FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 45 DEGREES BENT TUBE
MS51522 Revision C:2017 ELBOW, TUBE, 45 DEGREE SWIVEL, 37 DEGREE FLARED
MS51512 Revision D:2017 TEE, PIPE TO TUBE, MALE PIPE ON BRANCH, 37 DEGREE FLARED
MIL-DTL-52525-3 Revision D:2011 Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, 90 Degree Bent Tube, Short Drop
MS51531 Revision B:1985 NUT, TUBE COUPLING, 37 DEGREE FLARED
MS39322 Revision B:2017 ADAPTER: 37 DEGREE FLARE, FEMALE SWIVEL TO WELD SOCKET, 3/4 INCH TO 1 INCH
MIL-DTL-32464-11 Base Document:2013 Male Adapter, Bulkhead, 37 Degrees Spherical to ANPT, 1500-3000 PSI
14/30310862 DC : 0 BS EN 4832 - AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING AND RING-LOCKED FITTING-REDUCER - INCH SERIES - TECHNICAL SPECIFICATION
MS51533 Revision A:1979 SLEEVE, COMPRESSION, TUBE FITTING, 37 DEGREE FLARED
MS51526 Revision A:1979 ADAPTER, STRAIGHT, TUBE TO BOSS, O-RING, 37 DEGREE FLARED (LONG)
MS51530 Revision B:1988 FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, STEEL; TEE, TUBE TO BOSS, BOSS ON RUN, O-RING, 37 DEGREE FLARED
MS20756 Revision F:2011 FLANGE, SWIVEL, RETAINING
MIL-DTL-32372-11 Revision A:2017 Fitting, Adapter, Tee, Hydraulic and Pneumatic, ORFS Male to ORFS Female Swivel to NPTF Male on Branch
MIL-DTL-52525-9 Revision C:2008 FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, STRAIGHT
SAE AS 5528 : 2016 LUBRICANT APPLICATION, SOLID FILM, HEAT CURED, CORROSION INHIBITING
AN914 Revision 11:2012 ELBOW, PIPE, INTERNAL AND EXTERNAL THREAD, 90 DEGREES
MIL-DTL-83796-9 Revision C:2010 Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flange to Flange
MS20761 Revision C:2016 ELBOW, FLARED TUBE, FLANGED, SWIVEL, 45 DEGREES
SAE J 2656 : 2016 Fastener Part Standard - Hexagon Socket, Square Head, and Slotted Headless Set Screws - Inch Dimensioned<br>
SAE J 2484 : 2012 FASTENER PART STANDARD - MACHINE SCREWS
SAE AS 5000 : 2010 FITTING, PLUG-IN UNION, RING LOCKED, 24 DEGREE CONE, FLUID CONNECTION, 5080 PSI (35000 KPA), SPECIFICATION FOR
SAE AS 45909 : 2015 STUD, LOCKED IN, RING LOCKED, SERRATED, GENERAL SPECIFICATION FOR
SAE AS 6450 : 2012(S2019) LUBRICANT APPLICATION, SOLID FILM, HEAT CURED, POTABLE WATER, HYDRAULIC, AND OTHER FLUID SYSTEMS
SAE J 2596 : 2013 FASTENER PART STANDARD - TAPPING SCREWS AND METALLIC DRIVE SCREWS (INCH DIMENSIONED)
NASA STD 6016(INT) : 2006 STANDARD MATERIALS AND PROCESSES REQUIREMENTS FOR SPACECRAFT
NASA STD 5005 : 2013 STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT
NASA STD 5005(INT) : 2007 THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT
NASA KSC DE 512-SM : 2012 FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS
NASA STD 6016 : 2016 STANDARD MATERIALS AND PROCESSES REQUIREMENTS FOR SPACECRAFT
NASA JSC 27301 : 2009 MATERIALS AND PROCESSES SELECTION, CONTROL, AND IMPLEMENTATION PLAN FOR JSC FLIGHT HARDWARE
MIL-DTL-52525-17 Revision C:2008 FITTINGS, CLAMP-HALVES, FLANGE TO PORT, FOR 4-BOLT SPLIT-FLANGE
MIL-DTL-52525-31 Revision B:2008 FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL
MIL-DTL-52525 Revision F:2008 FITTINGS, HOSE, HYDRAULIC, REUSABLE, FIELD-ATTACHABLE AND CLAMP-HALVES, TO MATE WITH SAE-J517 TYPE HOSES, GENERAL SPECIFICATION FOR
MIL-F-18280 Revision F:1995 FITTING, FLARELESS TUBE, FLUID CONNECTION
MIL-DTL-32480-2 Base Document:2014 Fitting, Adapter, 45 Degree Elbow, Hydraulic and Pneumatic, Flareless Male to ORFS Male
MIL-DTL-83796-8 Revision D:2014 HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARELESS TO FLANGE, WITH LOCKWIRE HOLE
MIL-DTL-83796-17 Revision A:2010 Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flareless to Flange, with Lockwire Hole
MIL-DTL-32480-8 Base Document:2014 Fitting, Adapter, 45 Degree Elbow, Hydraulic and Pneumatic, Flareless, Male to ORFS, Female Swivel
MIL-DTL-32460-4 Base Document:2013 FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS BULKHEAD
SAE MA 2005 : 2015 TUBE FITTINGS, AEROSPACE FLUID SYSTEMS, SEPARABLE, FOR 24 DEGREE CONE, GENERAL SPECIFICATION, METRIC
MIL-DTL-32372-5 Revision A:2017 Fitting, Adapter, 45 Degree, Hydraulic and Pneumatic, NPTF Male to ORFS Bulkhead
MIL-DTL-32464-3 Base Document:2013 Male Adapter, 90 Degrees Elbow, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 1500-3000 PSI
MS28754 Revision E:2012 FITTING END, SELF-SEALING FUEL HOSE, SWIVEL, DETACHABLE, FLANGED, 45 DEGREES
MIL-DTL-32372-10 Revision A:2017 Fitting, Adapter, Tee, Hydraulic and Pneumatic, ORFS Female Run to Run to NPTF Male on Branch
MIL-STD-171 Revision F:2011 FINISHING OF METAL AND WOOD SURFACES
MIL-DTL-5070 Revision F:2006 ADAPTER, HOSE TO TUBE, PIPE AND FLANGE, REUSABLE - HYDRAULIC, FUEL, AND OIL LINES, GENERAL SPECIFICATION FOR
16/30346081 DC : 0 BS EN 4510 - AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREE, SPHERICAL IN TITANIUM ALLOY TIP64001 - ADAPTERS, STRAIGHT, DOUBLE END, WITH LOCKING RING
MIL-DTL-32480-3 Base Document:2014 Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, Flareless Male to ORFS Male
MS28753 Revision E:2012 FITTING END, SELF-SEALING FUEL HOSE, SWIVEL, DETACHABLE, FLANGED, STRAIGHT
MIL-DTL-52471-8 Revision B:2008 HOSE ASSEMBLIES, RUBBER: HYDRAULIC PRESSURE-TYPE; TYPE 100RE
MIL-DTL-32460-9 Base Document:2013 FITTING, ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS, FEMALE SWIVEL
AN848 Revision 13:2015 Elbow, Hose, 90 Degree
MIL-DTL-32464-9 Base Document:2013 Male Adapter, Tee, Bulkhead, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 37 Degrees Spherical on Run, 1500-3000 PSI
MS51818 Revision E:1987 TEE, PIPE TO TUBE, MALE PIPE ON BRANCH, FLARELESS TYPE, HYDRAULIC
SAE AS 4604 : 2003 HOSE ASSEMBLY, 3000 PSI, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 400 DEGREES F, HEAVY DUTY, AIRCRAFT HYDRAULIC SYSTEMS
MIL-DTL-32371-1 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Straight
MIL-DTL-52525-16 Revision D:2008 FITTINGS, CLAMP-HALVES, FOR 4-BOLT SPLIT-FLANGE, SAE-J518, TYPE SPLIT-FLANGE CLAMP (SFC)
MIL-DTL-52471-2 Revision C:2008 HOSE ASSEMBLIES, RUBBER: HYDRAULIC PRESSURE-TYPE; TYPE 100R2, DOUBLE-WIRE BRAIDED REINFORCEMENT HOSE
MS27404 Revision C:2017 ADAPTER, STRAIGHT, REUSABLE, TUBE TO HOSE, LOW PRESSURE
MIL-DTL-52525-37 Revision B:2008 FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, STRAIGHT
MIL-DTL-52471-3 Revision C:2008 HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE-TYPE, TYPE 100RE, FOUR-WIRE BRAIDED REINFORCEMENT OR MULTIPLE WIRE BRAIDED STEEL WIRE REINFORCED HOSE
MS51841 Revision E:2017 TEE, TUBE TO BOSS, BOSS ON BENCH, O-RING, FLARELESS TYPE, HYDRAULIC
SAE J 2655 : 2015 FASTENER PART STANDARD - WASHERS AND LOCKWASHERS (INCH DIMENSIONED)
ISO 7169:2014 Aerospace Separable tube fittings for fluid systems, for 24 degree cones, for pressures up to 3 000 psi or 21 000 kPa Procurement specification, inch/metric
EN 3248:2001 Aerospace series - Pipe coupling 8°30' in titanium alloy - Adaptors, reduced pipe end, with lockring
MS51517 Revision C:2017 CROSS, TUBE, 37 DEGREE FLARED
MIL-DTL-32372-1 Revision A:2017 Fitting, Adapter, Straight, Hydraulic and Pneumatic, NPTF Male to ORFS Male
MIL-DTL-32480-9 Base Document:2014 Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, Flareless, Male to ORFS, Female Swivel
MIL-DTL-32371-5 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Union Cross, Spherical on Branch
MIL-DTL-32371-7 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 45 Degrees Elbow, Bulkhead
MS51500 Revision F:2017 FITTINGS, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, ADAPTER, STRAIGHT, PIPE TO TUBE, MALE END, 37 DEGREE FLARED
MS51505 Revision C:2016 ELBOW, TUBE, 90 DEGREE, 37 DEGREE FLARED
MIL-DTL-32480-4 Base Document:2014 Fitting, Adapter, Straight, Hydraulic and Pneumatic, Flareless Male to ORFS Bulkhead
MIL-DTL-52525-45 Base Document:2008 FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 90 DEGREES BENT TUBE
MS51513 Revision D:2017 TEE, PIPE TO TUBE, FEMALE PIPE ON BRANCH, 37 DEGREE FLARED
MIL-DTL-52525-8 Revision C:2008 FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE, LONG DROP
MIL-DTL-32371-2 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 45 Degrees Elbow
MS51506 Revision E:2017 FITTINGS, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, ELBOW, PIPE TO TUBE, 90 DEGREE, FEMALE PIPE END, 37 DEGREE FLARED
MS51527 Revision D:2000 Fittings, Hydraulic Tube, Flared, 37 Degree and Flareless, Steel; Elbow, Tube to Boss, 90 Degree, O-Ring, 37 Degree Flared
MIL-DTL-52525-39 Revision B:2008 FITTINGS, HOSE, SCREW-ON TO 37DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE
MS51815 Revision F:1987 ELBOW PIPE TO TUBE 90 DEGREE, MALE PIPE END, FLARELESS TYPE, HYDRAULIC
MS39323 Revision C:2017 FITTING, TUBE, REDUCER: 37 DEGREE FLARE
MS51523 Revision C:2017 TEE, TUBE TO SWIVEL, SWIVEL ON RUN, 37 DEGREE FLARED
MIL-DTL-52525-14 Revision C:2008 FITTINGS, HOSE CRIMP TYPE, SPLIT-FLANGE 45 DEGREES BENT
MS51511 Revision D:2017 TEE, PIPE TO TUBE, MALE PIPE ON RUN, 37 DEGREE FLARED
MS51812 Revision F:1987 NIPPLE, TUBE, BULKHEAD, FLARELESS TYPE HYDRAULIC
MS51515 Revision D:2017 TEE, TUBE, BULKHEAD ON BRANCH, 37 DEGREE FLARED
MIL-DTL-52525-42 Revision B:2008 FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE 90 DEGREES BENT
MIL-DTL-52525-41 Revision A:2008 FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 45 DEGREES BENT TUBE
MS51817 Revision E:1987 ELBOW, PIPE TO TUBE, 45 DEGREE MALE PIPE END, FLARELESS TYPE, HYDRAULIC
MS51820 Revision E:1987 ELBOW, TUBE, 90 DEGREE, FLARELESS TYPE, HYDRAULIC
MS51518 Revision C:2017 PLUG, MACHINE THREAD, 37 DEGREE FLARED
MS51813 Revision E:1987 ELBOW, PIPE TO TUBE 90 DEGREE, FEMALE PIPE END, FLARELESS TYPE, HYDRAULIC
SAE AS 4875 : 2016 FITTINGS, STRAIGHT THREADED BOSS OR FLANGED, FLUID CONNECTION
MIL-DTL-52525-12 Revision D:2011 Fittings, Hose, Screw on to Split-Flange 90 Degree Bent
MIL-DTL-32460-2 Base Document:2013 FITTING, ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS MALE
MIL-DTL-52525-33 Revision A:2008 FITTINGS, WIRE REINFORCED HYDRAULIC HOSE AND CLAMP-HALVES: FIELD ATTACHABLE (REUSABLE), SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE, FOR USE WITH TYPE 100RE FOUR-SPRIAL-WRAP REINFORCEMENT HOSE
MS28755 Revision E:2012 FITTING END, SELF-SEALING FUEL HOSE, SWIVEL, DETACHABLE, FLANGED, 90 DEGREES
MIL-DTL-52525-4 Revision D:2011 Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, 90 Degree Bent Tube, Long Drop
MS51503 Revision C:2016 ADAPTER, STRAIGHT, PIPE TO TUBE, FEMALE PIPE END, 37 DEGREE FLARED
MIL-DTL-32372-3 Revision A:2017 Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, NPTF Male to ORFS Male
MS51504 Revision C:2016 ELBOW, PIPE TO TUBE, 90 DEGREE MALE PIPE END, 37 DEGREE FLARED
SAE J 2485 : 2012 FASTENER PART STANDARD - MACHINE SCREW NUTS (METRIC AND INCH)
PREN 4833 : DRAFT 2017 AEROSPACE SERIES - PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING LOCKED FITTING - FLARELESS END - INCH SERIES - EXTRA FINE THREAD PITCH
PREN 4836 : DRAFT 2017 AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING REDUCER - FLARELESS END - INCH SERIES - EXTRA FINE THREAD PITCH
PREN 4510 : DRAFT 2017 AEROSPACE SERIES - PIPE COUPLING, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY TI-P64001, PORT ADAPTER, STRAIGHT, DOUBLE END, WITH LOCKING RING

$165.09
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more