Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

SAE AMS 3970/1 : 2011

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

CARBON FIBER FABRIC REPAIR PREPREG, 120 DEGREES C (250 DEGREES F) VACUUM CURING - PART 1 - GENERAL REQUIREMENTS

Available format(s)

Hardcopy , PDF

Superseded date

24-10-2019

Language(s)

English

Published date

06-12-2016

1. SCOPE
2. APPLICABLE DOCUMENTS
3. DEFINITIONS
4. REQUIREMENTS
5. QUALIFICATION
6. COMPOSITE TEST METHODS AND SPECIMEN MANUFACTURING
7. NOTES
APPENDIX A - AUTHORIZED ANCILLARY MATERIALS

Provides information about the technical requirements and qualification procedure for carbon fiber fabric epoxy prepreg and a companion non-structural glass prepreg used for repair of carbon fiber reinforced epoxy structures.

Committee
AMS CACRC
DocumentType
Standard
Pages
45
PublisherName
SAE International
Status
Superseded

SAE AMS 3970 : 2016 CARBON FIBER FABRIC REPAIR PREPREG, 120 DEGREES C (250 DEGREES F) VACUUM CURING - PART 0: INTRODUCTION
SAE AMS 3970/2 : 2011 CARBON FIBER FABRIC REPAIR PREPREG, 120 DEGREES C (250 DEGREES F) VACUUM CURING - PART 2: QUALIFICATION PROGRAM FOR FIBER, FABRIC, CARBON PREPREG, FILM ADHESIVE AND NON-STRUCTURAL GLASS PREPREG
SAE AMS 3970/6 : 2011 CARBON FIBER FABRIC REPAIR PREPREG, 120 DEGREES C (250 DEGREES F) VACUUM CURING - PART 6 - MATERIAL SPECIFICATION: CARBON FIBER FABRIC REINFORCED EPOXY PREPREG FOR REPAIR, PLAIN WEAVE FABRIC, 193 G/M[2], ADHESIVE FILM FOR REPAIR AND NON-STRUCTURAL GLASS FIBER FABRIC REINFORCED EPOXY PREPREG, 105 G/M[2]
SAE AMS 3970/3 : 2011 CARBON FIBER FABRIC REPAIR PREPREG, 120 DEGREES C (250 DEGREES F) VACUUM CURING - PART 3: PURCHASING SPECIFICATION FOR CARBON PREPREG
SAE AMS 3970/5 : 2011 CARBON FIBER FABRIC REPAIR PREPREG, 120 DEGREES C (250 DEGREES F) VACUUM CURING - PART 5: PURCHASING SPECIFICATION FOR COMPANION NON-STRUCTURAL GLASS FIBER FABRIC PREPREG
SAE AMS 3970/4 : 2011 CARBON FIBER FABRIC REPAIR PREPREG, 120 DEGREES C (250 DEGREES F) VACUUM CURING - PART 4: PURCHASING SPECIFICATION FOR FILM ADHESIVE

EN 2559:1997 Aerospace series - Carbon fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area
EN 2565:2013 Aerospace series - Preparation of carbon fibre reinforced resin panels for test purposes
ASTM D 5961/D5961M : 2017 : REDLINE Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates
SAE AMS 3970/6 : 2011 CARBON FIBER FABRIC REPAIR PREPREG, 120 DEGREES C (250 DEGREES F) VACUUM CURING - PART 6 - MATERIAL SPECIFICATION: CARBON FIBER FABRIC REINFORCED EPOXY PREPREG FOR REPAIR, PLAIN WEAVE FABRIC, 193 G/M[2], ADHESIVE FILM FOR REPAIR AND NON-STRUCTURAL GLASS FIBER FABRIC REINFORCED EPOXY PREPREG, 105 G/M[2]
ISO 10119:2002 Carbon fibre Determination of density
PREN 2379 : 200P1 AEROSPACE SERIES - FLUIDS FOR ASSESSMENT OF NON-METALLIC MATERIALS
SAE AMS 3970/2 : 2011 CARBON FIBER FABRIC REPAIR PREPREG, 120 DEGREES C (250 DEGREES F) VACUUM CURING - PART 2: QUALIFICATION PROGRAM FOR FIBER, FABRIC, CARBON PREPREG, FILM ADHESIVE AND NON-STRUCTURAL GLASS PREPREG
ISO 10120:1991 Carbon fibre — Determination of linear density
PREN 6062 : 200P1 AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - TEST METHOD - FLATWISE TENSILE TEST OF COMPOSITE SANDWICH PANEL
PREN 6060 : 200P1 AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - TEST METHOD - DETERMINATION OF THE TENSILE SINGLE LAP SHEAR STRENGTH
EN 2563 : 1997 AEROSPACE SERIES - CARBON FIBRE REINFORCED PLASTICS - UNIDIRECTIONAL LAMINATES - DETERMINATION OF THE APPARENT INTERLAMINAR SHEAR STRENGTH
PREN 3003 : 200P1 AEROSPACE SERIES - NON-METALLIC MATERIALS - STRUCTURAL ADHESIVES - DETERMINATION OF MASS PER UNIT AREA OF FILM ADHESIVES - TEST METHOD
ASTM D 5229/D5229M : 2014-06 TEST METHOD FOR MOISTURE ABSORPTION PROPERTIES AND EQUILIBRIUM CONDITIONING OF POLYMER MATRIX COMPOSITE MATERIALS
EN 6034:2015 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode II - GIIC
EN 6038:2015 Aerospace series - Fibre reinforced plastics - Test method - Determination of the compression strength after impact
ISO 1890:2009 Reinforcement yarns Determination of twist
ISO 11357-5:2013 Plastics — Differential scanning calorimetry (DSC) — Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
EN 6037:2015 Aerospace series - Fibre reinforced plastics - Test method - Determination of bearing strength
EN 6031:2015 Aerospace series - Fibre reinforced plastics - Test method - Determination of in-plane shear properties (± 45° tensile test)
ASTM D 5528 : 2013 : REDLINE Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM C 393 : 2000 Standard Test Method for Flexural Properties of Sandwich Constructions
SAE AMS 3970/5 : 2011 CARBON FIBER FABRIC REPAIR PREPREG, 120 DEGREES C (250 DEGREES F) VACUUM CURING - PART 5: PURCHASING SPECIFICATION FOR COMPANION NON-STRUCTURAL GLASS FIBER FABRIC PREPREG
ASTM D 2344/D2344M : 2016 : REDLINE Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
PREN 6043 : 200P1 AEROSPACE SERIES - THERMOSETTING RESIN SYSTEMS - TEST METHOD - DETERMINATION OF GEL TIME AND VISCOSITY
EN 2329 : 1993 AEROSPACE SERIES - TEXTILE GLASS FIBRE PREIMPREGNATES - TEST METHOD FOR THE DETERMINATION OF MASS PER UNIT AREA
EN 2561 : 1995 AEROSPACE SERIES - CARBON FIBRE REINFORCED PLASTICS - UNIDIRECTIONAL LAMINATES - TENSILE TEST PARALLEL TO THE FIBRE DIRECTION
EN 2489 : 1995 AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - DETERMINATION OF THE ACTION OF TEST FLUIDS
SAE AMS 3970/4 : 2011 CARBON FIBER FABRIC REPAIR PREPREG, 120 DEGREES C (250 DEGREES F) VACUUM CURING - PART 4: PURCHASING SPECIFICATION FOR FILM ADHESIVE
EN 6033:2015 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode I - GIC
ISO 11357-2:2013 Plastics Differential scanning calorimetry (DSC) Part 2: Determination of glass transition temperature and glass transition step height
ISO 10618:2004 Carbon fibre — Determination of tensile properties of resin-impregnated yarn
PREN 6066 : 200P1 AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - TEST METHOD - DETERMINATION OF TENSILE STRENGTH OF A TAPERED AND STEPPED JOINTS
ISO 1183:1987 Plastics Methods for determining the density and relative density of non-cellular plastics
EN 2560 : 1998 AEROSPACE SERIES - CARBON FIBRE PREIMPREGNATES - DETERMINATION OF THE RESIN FLOW
PREN 2823 : 200P2 AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - DETERMINATION OF THE EFFECT OF EXPOSURE TO HUMID ATMOSPHERE ON PHYSICAL AND MECHANICAL CHARACTERISTICS
EN 2330 : 1993 AEROSPACE SERIES - TEXTILE GLASS FIBRE PREIMPREGNATES - TEST METHOD FOR THE DETERMINATION OF THE CONTENT OF VOLATILE MATTER
ISO 10548:2002 Carbon fibre — Determination of size content
ASTM D 3518/D3518M : 2013-09 TEST METHOD FOR IN-PLANE SHEAR RESPONSE OF POLYMER MATRIX COMPOSITE MATERIALS BY TENSILE TEST OF A +/-45 DEGREES LAMINATE
ASTM D 4440 : 2015 : REDLINE Standard Test Method for Plastics: Dynamic Mechanical Properties Melt Rheology
ISO 472:2013 Plastics Vocabulary
EN 6032:2015 Aerospace series - Fibre reinforced plastics - Test method - Determination of the glass transition temperatures
EN 6036:2015 Aerospace series - Fibre reinforced plastics - Test method - Determination of notched, unnotched and filled hole compression strength
SAE ARP 4916 : 1997 MASKING AND CLEANING OF EPOXY AND POLYESTER MATRIX THERMOSETTING COMPOSITE MATERIALS
ASTM D 3171 : 2015 : REDLINE Standard Test Methods for Constituent Content of Composite Materials
MIL-DTL-83133 Revision J:2015 TURBINE FUEL, AVIATION, KEROSENE TYPE, JP-8 (NATO F-34), NATO F-35, AND JP-8+100 (NATO F-37)
ASTM D 3531/D3531M : 2016 : REDLINE Standard Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg
ASD-STAN prEN 6061 P1:1995 AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - TEST METHOD - DETERMINATION OF SANDWICH FLEXURAL STRENGTH 4 POINT BENDING
PREN 6041 : 200P1 AEROSPACE SERIES - NON-METALLIC MATERIALS - TEST METHOD - ANALYSIS ON NON-METALLIC MATERIALS (UNCURED) BY DIFFERENTIAL SCANNING CALORIMETRY (DSC)
ASTM C 297 : 1994 : R1999 Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions
MIL-PRF-83282 Revision D:1997 HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537
PREN 6040 : 200P1 AEROSPACE SERIES - NON-METALLIC MATERIALS - TEST METHOD - ANALYSIS OF THERMOSET SYSTEMS BY HIGH PERFORMANCE - LIQUID CHROMATOGRAPHY (HPLC)
ISO 9000:2015 Quality management systems — Fundamentals and vocabulary
PREN 3615 : 200P2 AEROSPACE SERIES - FIBRE REINFORCED PLASTICS - DETERMINATION OF THE CONDITIONS OF EXPOSURE TO HUMID ATMOSPHERE AND OF MOISTURE ABSORPTION
ASTM D 3039/D3039M : 2017 : REDLINE Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
PREN 6064 : 200P1 AEROSPACE SERIES - NON-METALLIC MATERIALS - ANALYSIS OF NON-METALLIC MATERIALS (CURED) FOR THE DETERMINATION OF THE EXTENT OF CURE BY DIFFERENTIAL SCANNING CALORIMETRY (DSC)
SAE AMS C 9084 : 2013 CLOTH, GLASS, FINISHED, FOR RESIN LAMINATES
PREN 2850 : 200P2 AEROSPACE SERIES - CARBON FIBRE THERMOSETTING RESIN UNIDIRECTIONAL LAMINATES - COMPRESSION TEST PARALLEL TO FIBRE DIRECTION
SAE AMS 3970/3 : 2011 CARBON FIBER FABRIC REPAIR PREPREG, 120 DEGREES C (250 DEGREES F) VACUUM CURING - PART 3: PURCHASING SPECIFICATION FOR CARBON PREPREG
EN 6035:2015 Aerospace series - Fibre reinforced plastics - Test method - Determination of notched and unnotched tensile strength
PREN 6042 : 200P1 AEROSPACE SERIES - ORGANIC COMPOUNDS - TEST METHOD - ANALYSIS BY INFRARED SPECTROSCOPY
EN 2558 : 1997 AEROSPACE SERIES - CARBON FIBRE PREIMPREGNATES - DETERMINATION OF THE VOLATILE CONTENT
ASTM D 6484/D6484M : 2014 : REDLINE Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
EN 2557 : 1997 AEROSPACE SERIES - CARBON FIBRE PREIMPREGNATES - DETERMINATION OF MASS PER UNIT AREA
SAE AIR 4844 : 1999 COMPOSITES AND METAL BONDING GLOSSARY
EN 2331 : 1993 AEROSPACE SERIES - TEXTILE GLASS FIBRE PREIMPREGNATES - TEST METHOD FOR THE DETERMINATION OF THE RESIN AND FIBRE CONTENT AND MASS OF FIBRE PER UNIT AREA
SAE AMS 3970 : 2016 CARBON FIBER FABRIC REPAIR PREPREG, 120 DEGREES C (250 DEGREES F) VACUUM CURING - PART 0: INTRODUCTION
ASTM D 7137/D7137M : 2017 : REDLINE Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates

$300.92
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more