SAE AS 81703 : 2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
CONNECTORS, ELECTRIC, CIRCULAR, MINIATURE, RACK AND PANEL OR PUSH-PULL COUPLING, ENVIRONMENT RESISTING
Hardcopy , PDF
24-05-2023
English
01-01-2012
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY FOR MILITARY CONTRACT
(UNLESS OTHERWISE SPECIFIED)
6. NOTES
Specifies three series of environment resisting, circular, miniature electrical connectors (plugs and receptacles) with removable crimp and/or nonremovable solder contacts, and accessories.
Committee |
AE-8C1
|
DevelopmentNote |
Supersedes MIL C 81703. (09/2004)
|
DocumentType |
Standard
|
Pages |
48
|
PublisherName |
SAE International
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
SAE AS34641B:2023 | CONNECTOR, RECEPTACLE, ELECTRIC, CRIMP TYPE, JAM NUT MOUNTING, PUSH-PULL COUPLING, SERIES 3 (CLASS L AND E) |
MIL-STD-1353 Revision C:2014 | ELECTRICAL CONNECTORS, PLUG-IN SOCKETS AND ASSOCIATED HARDWARE, SELECTION AND USE OF |
DSCC 89017 : D | CONNECTOR ACCESSORIES, ELECTRICAL, ADAPTER, SHRINK BOOT, RFI/EMI, 45 DEGREES, CATEGORY 3C, FOR MIL-DTL-83723 SERIES 3, SAE-AS50151 (SAE-AS34001 AND AS34501), SAE-AS81703 SERIES 3, AND MIL-DTL-26482 SERIES 2 |
MS3187 Revision F:2007 | PLUG, END SEAL, FOR MIL-DTL-26482, MIL-DTL-5015, MIL-C-81703 AND MIL-DTL-83723 ELECTRICAL CONNECTORS |
NASA MSFC STD 3012 : 2012 | ELECTRICAL, ELECTRONIC, AND ELECTROMECHANICAL (EEE) PARTS MANAGEMENT AND CONTROL REQUIREMENTS FOR MSFC SPACE FLIGHT HARDWARE |
MIL-HDBK-1646 Base Document:2016 | Selectionof Electrical Contacts, Connectors and Associated Servicing Tools |
SAE AIR 6151 : 2014(R 2019) | TORQUE, THREADED APPLICATION, ELECTRICAL CONNECTOR, ACCESSORY AND TERMINAL BOARD INSTALLATION |
SAE AS 85049 : 2016 | CONNECTOR ACCESSORIES, ELECTRICAL GENERAL SPECIFICATION FOR |
SAE ARP 1308 : 2014 | ELECTRICAL CONNECTORS FOR AEROSPACE, SHIPBOARD, GROUND VEHICLES AND ASSOCIATED EQUIPMENT |
SAE ARP 6903 : 2017 | GUIDE FOR ACHIEVING PLATING/FINISH COMPATIBILITY WITH CONNECTORS AND ACCESSORIES USED IN ELECTRICAL WIRING INTERCONNECT SYSTEMS (EWIS) |
SAE AS 81969/8 : 2016 | INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE 1 & 2, CLASS 2, COMPOSITION A |
SAE AS 33701 : 2015 | INSERT ARRANGEMENTS, ELECTRIC CONNECTOR, SHELL SIZE 19 (FOR AS81703 CONNECTORS) |
SAE AS 31441 : 2016 | CONNECTOR, RECEPTACLE, ELECTRIC, CRIMP TYPE, JAM NUT MOUNTING, PUSH-PULL, COUPLING, SERIES 2 (CLASS E AND J) |
MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
SAE AS 81969/30 : 2017 | INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE 2, CLASS 2, COMPOSITION C, FOR UNWIRED CONTACTS |
SAE AMS QQ P 416 : 2016 | PLATING, CADMIUM (ELECTRODEPOSITED) |
SAE AS 85049/138 : 2017 | CONNECTOR ACCESSORIES, ELECTRICAL, CAP, DUST, PLASTIC, CATEGORY 9 |
MIL-DTL-5624 Revision W:2016 | TURBINE FUEL, AVIATION, GRADES JP-4 AND JP-5 |
ASTM B 339 : 2012 : REDLINE | Standard Specification for Pig Tin |
SAE AS 39029/4 : 2012 | CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, MIL-DTL-83723 SERIES 1 AND 3, AND MIL-DTL-83733 CONNECTORS) |
SAE AS 31301 : 2011 | CONNECTOR, RECEPTACLE, ELECTRIC, SOLDER TYPE, WALL MTG. FLANGE, PUSH-PULL COUPLING, SERIES 1 (CLASS E, P AND J) |
MIL-STD-147 Revision E:2008 | PALLETIZED UNIT LOADS |
IPC J STD 001 : F | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
MIL-DTL-45204 Revision D:2007 | Gold Plating, Electrodeposited |
MIL-PRF-7808 Revision L:1997 | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
ANSI/NCSL Z540 3 : 2006(R2013) | REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT |
MIL-STD-2073-1 Revision E:2008 | STANDARD PRACTICE FOR MILITARY PACKAGING |
MIL-PRF-5606 Revision H:2002 | HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE |
PPP-B-566 Revision E:1974 | BOX, FOLDING, PAPERBOARD |
SAE AS 33702 : 2015 | INSERT ARRANGEMENTS, ELECTRIC CONNECTOR, SHELL SIZE 27 (FOR AS81703 CONNECTORS) |
SAE AIR 1351 : 2014 | MANUFACTURERS' IDENTIFICATION OF AEROSPACE ELECTRICAL AND ELECTRONIC WIRING DEVICES AND ACCESSORIES |
SAE AS 39029/5 : 2017 | CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, MIL-DTL-83723 SERIES 1 AND 3, MIL-DTL-83733 CONNECTORS, MIL-DTL-12883/40, AND /41 RELAY SOCKETS) |
SAE AS 34451 : 2016 | CONNECTOR, PLUG, ELECTRIC, CRIMP TYPE, RACK AND PANEL, SERIES 2, (CLASS E) |
ASTM B 545 : 2013 : REDLINE | Standard Specification for Electrodeposited Coatings of Tin |
MS3187 Revision F:2007 | PLUG, END SEAL, FOR MIL-DTL-26482, MIL-DTL-5015, MIL-C-81703 AND MIL-DTL-83723 ELECTRICAL CONNECTORS |
SAE AS 31461 : 2016 | CONNECTOR, RECEPTACLE, ELECTRIC, HERMETIC, CRIMP TYPE, SOLDER MOUNTING, PUSH-PULL COUPLING, SERIES 3 (CLASS N) |
MIL-DTL-81381 Revision C:2005 | WIRE, ELECTRIC, POLYIMIDE-INSULATED, COPPER OR COPPER ALLOY |
SAE AS 39029/10 : 2016 | CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, THERMOCOUPLE (FOR MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, MIL-DTL-83723 SERIES 1 AND 3, AND MIL-DTL-83733 CONNECTORS) |
SAE AS 31381 : 2016 | CONNECTOR, PLUG, ELECTRIC, SOLDER TYPE LANYARD, PUSH-PULL COUPLING, SERIES 1 (CLASS E, P, AND J) |
SAE AS 81969/17 : 2014 (R2018) | INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE 1, CLASS 1, COMPOSITION C |
MIL-HDBK-454 Revision B:2007 | GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT |
IPC HDBK 001 : E | HANDBOOK AND GUIDE TO SUPPLEMENT J-STD-001 |
MS3461 Revision A:1975 | TEST GAGE, MIL-C-0026482 SERIES 2 OR MIL-C-81703 SERIES 3 CONTACT RETENTION FEATURE |
SAE AS 34671 : 2015 | CONNECTOR, PLUG, ELECTRIC, CRIMP TYPE, PUSH-PULL COUPLING, SERIES 3 (CLASS L AND E) |
SAE AS 34241 : 2014 | CONNECTOR, RECEPTACLE, ELECTRIC, CRIMP TYPE, WALL MOUNTING FLANGE, PUSH-PULL COUPLING, SERIES 3 (CLASS L AND E) |
SAE AS 34461 : 2016 | CONNECTOR, PLUG, ELECTRIC, CRIMP TYPE, RACK AND PANEL, SERIES 3 (CLASS L AND E) |
SAE AS 33699 : 2015 | INSERT ARRANGEMENTS, ELECTRIC CONNECTOR, SHELL SIZE 7 (FOR AS81703 CONNECTORS) |
SAE AS 31831 : 2017 | COVER, PROTECTIVE, ELECTRIC CONNECTOR, RECEPTACLE, PUSH-PULL COUPLING |
SAE AS 39029/7 : 2011 | CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED (FOR MIL-C-26482 SERIES 2 AND MIL-C-81703 SERIES 3 CONNECTORS) |
SAE AS 22759 : 2014 | WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, COPPER OR COPPER ALLOY |
ASTM D 1974 : 1998 | Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes |
SAE AS 31491 : 2016 | CONNECTOR, RECEPTACLE, ELECTRIC, HERMETIC, CRIMP TYPE, SINGLE HOLE MOUNTING, PUSH-PULL COUPLING, SERIES 3 (CLASS N) |
SAE AS 31351 : 2016 | CONNECTOR, RECEPTACLE, ELECTRIC, DUMMY STOWAGE, WALL MOUNTING FLANGE, PUSH-PULL COUPLING (SERIES 1 AND 2 CONNECTORS) |
SAE AS 85049 : 2016 | CONNECTOR ACCESSORIES, ELECTRICAL GENERAL SPECIFICATION FOR |
MS3460 Revision A:1975 | TEST GAGE, MIL-C-0026482 SERIES 1 OR MIL-C-81703 SERIES 2 CONTACT RETENTION FEATURE |
MIL-PRF-23699 Revision G:2014 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167 |
PPP-B-676 Revision E:1992 | BOXES SET-UP |
SAE AS 33703 : 2016 | INSERT ARRANGEMENTS, ELECTRIC CONNECTOR, SHELL SIZE 37 (FOR AS81703 CONNECTORS) |
SAE AS 34661 : 2016 | CONNECTOR, RECEPTACLE, ELECTRIC, HERMETIC, SOLDER TYPE, BOX MOUNTING, PUSH-PULL COUPLING, SERIES 3 (CLASS H) |
ASTM D 4066 : 2013 | Standard Classification System for Nylon Injection and Extrusion Materials (PA) |
SAE AS 33704 : 2014(R2019) | INSERT ARRANGEMENTS, ELECTRICAL CONNECTOR, SHELL SIZE 61 (FOR AS81703 CONNECTORS) |
SAE AS 50881 : 2015 | WIRING AEROSPACE VEHICLE |
SAE AMS 2700E : 2011 | PASSIVATION OF CORROSION RESISTANT STEELS |
MIL-PRF-8516 Revision G:1997 | SEALING COMPOUND, SYNTHETIC RUBBER, ELECTRIC CONNECTORS AND ELECTRIC SYSTEMS, CHEMICALLY CURED |
SAE AS 31471 : 2016 | CONNECTOR, PLUG, ELECTRIC, CRIMP TYPE, PUSH-PULL COUPLING, SERIES 2 (CLASS E AND J) |
SAE AS 31341 : 2016 | CONNECTOR, RECEPTACLE, ELECTRIC, SOLDER TYPE, JAM NUT MOUNTING, PUSH-PULL, COUPLING, SERIES 1 (CLASS E, P, J AND H) |
MS3462 Revision B:1975 | Test Gage, MIL-C-26482 Series 2 (Class N), MIL-C-81703 Series 3 (Class N) and MIL-C-0081511 Series 3 And 4 (Class L) Contact Retention Feature |
SAE AS 39029/9 : 2016 | CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, THERMOCOUPLE (FOR MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, MIL-DTL-83723 SERIES 1 AND 3, AND MIL-DTL-83733 CONNECTORS) |
MIL-STD-202 Revision H:2015 | ELECTRONIC AND ELECTRICAL COMPONENT PARTS |
SAE AS 39029 : 2017 | CONTACTS, ELECTRICAL CONNECTOR, GENERAL SPECIFICATION FOR |
MIL-STD-1285 Revision D:2004 | MARKING OF ELECTRICAL AND ELECTRONIC PARTS |
ASTM A 342/A342M : 2014 : REDLINE | Standard Test Methods for Permeability of Weakly Magnetic Materials |
SAE AS 31321 : 2016 | CONNECTOR, RECEPTACLE, ELECTRIC, BOX MOUNTING FLANGE, PUSH-PULL COUPLING, SERIES 1 (CLASS E AND H) |
SAE AS 39029/8 : 2011 | CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED, (FOR MIL-C-26482 SERIES 2, MIL-C-81703 SERIES 3 CONNECTORS) |
SAE AS 31401 : 2011 | CONNECTOR, RECEPTACLE, ELECTRIC, CRIMP TYPE, WALL MOUNTING FLANGE, PUSH-PULL, COUPLING, SERIES 2 (CLASS E AND J) |
SAE AS 31371 : 2014 | CONNECTOR, PLUG, ELECTRIC, SOLDER TYPE, PUSH-PULL COUPLING SERIES 1 (CLASS E, P, AND J) |
SD 6 : 20140201 | PROVISIONS GOVERNING QUALIFICATION: QUALIFIED PRODUCTS LIST AND QUALIFIED MANUFACTURERS LISTS |
ISO 10012-1:1992 | Quality assurance requirements for measuring equipment Part 1: Metrological confirmation system for measuring equipment |
SAE AS 31821 : 2017 | COVER, PROTECTIVE, ELECTRONIC CONNECTOR, PLUG, PUSH-PULL COUPLING |
SAE AS 33698 : 2012 | INSERT ARRANGEMENTS, ELECTRIC CONNECTOR, SHELL SIZE 3 (FOR AS81703 CONNECTORS) |
SAE AS 31481 : 2012 | CONNECTOR, PLUG, ELECTRIC, CRIMP TYPE, LANYARD, PUSH-PULL COUPLING, SERIES 2 (CLASS E AND J) |
MIL-S-7742 Revision D:1991 | SCREW THREADS, STANDARD, OPTIMUM SELECTED SERIES, GENERAL SPECIFICATION FOR |
SAE AS 33700 : 2016 | INSERT ARRANGEMENTS, ELECTRIC CONNECTOR, SHELL SIZE 12 (FOR AS81703 CONNECTORS) |
SAE AS 31391 : 2016 | CONNECTOR, RECEPTACLE, ELECTRIC THRU BULKHEAD, WALL MOUNTING FLANGE, SERIES 1 (CLASS E) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.