Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

UNI EN 12952-2 : 2011

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES

Superseded date

18-05-2022

Published date

01-01-2011

Foreword
1 Scope
2 Normative references
3 General requirements
4 Material for pressure parts
5 Materials for non-pressure parts
6 Inspection documentation
Annex A (normative) - Materials covered by European
        material Standards
Annex B (normative) - Establishment of creep rupture
        strength values for new materials
Annex C (normative) - Special requirements for composite
        tubes
Annex D (informative) - Significant technical changes
        between this European Standard and the previous
        edition
Annex ZA (informative) - Relationship between this
         European Standard and the Essential Requirements
         of Directive 97/23/EC
Bibliography

Describes the requirements for the product forms for use in pressure parts of watertube boilers and for parts welded on to pressure parts: - plates; - wrought seamless tubes; - electrically welded tubes; - submerged, plasma and TIG arc-welded tubes; - forgings; - castings; - rolled bars; - welding consumables; - fasteners; - seamless composite tubes.

DocumentType
Standard
PublisherName
Ente Nazionale Italiano di Unificazione (UNI)
Status
Superseded
SupersededBy
Supersedes

EN ISO 3580:2017 Welding consumables - Covered electrodes for manual metal arc welding of creep-resisting steels - Classification (ISO 3580:2017)
ISO 14341:2010 Welding consumables Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels Classification
EN 10269:2013 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
ISO 26304:2011 Welding consumables Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels Classification
ISO 3581:2016 Welding consumables — Covered electrodes for manual metal arc welding of stainless and heat-resisting steels — Classification
ISO 14343:2017 Welding consumables — Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels — Classification
ISO/IEC 17021:2011 Conformity assessment Requirements for bodies providing audit and certification of management systems
ISO 24598:2012 Welding consumables Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels Classification
ISO 17633:2010 Welding consumables — Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels — Classification
EN 10216-5:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
EN 10213:2007+A1:2016 Steel castings for pressure purposes
EN ISO 6892-1:2016 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016)
EN 10028-3:2017 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
EN 10273:2016 Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
EN 10228-2:2016 Non-destructive testing of steel forgings - Part 2: Penetrant testing
ISO 544:2011 Welding consumables Technical delivery conditions for filler materials and fluxes Type of product, dimensions, tolerances and markings
EN ISO 10893-10:2011 Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-10:2011)
EN 10164:2004 Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
EN 1759-1:2004 Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24
EN ISO 8495:2013 Metallic materials - Tube - Ring-expanding test (ISO 8495:2013)
ISO/TR 15608:2017 Welding — Guidelines for a metallic materials grouping system
EN 1503-2:2000 Valves - Materials for bodies, bonnets and covers - Part 2: Steels other than those specified in European Standards
EN ISO 14171:2016 Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels - Classification (ISO 14171:2016)
ISO 2566-2:1984 Steel Conversion of elongation values Part 2: Austenitic steels
ISO 2560:2009 Welding consumables Covered electrodes for manual metal arc welding of non-alloy and fine grain steels Classification
EN 10314:2016 Method for the derivation of minimum values of proof strength of steel at elevated temperatures
ISO 6892-1:2016 Metallic materials Tensile testing Part 1: Method of test at room temperature
EN 12952-3:2011 Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler
ISO 18276:2017 Welding consumables — Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels — Classification
EN 1503-1:2000 Valves - Materials for bodies, bonnets and covers - Part 1: Steels specified in European Standards
EN 10254:1999 Steel closed die forgings - General technical delivery conditions
EN 12536:2000 Welding consumables - Rods for gas welding of non alloy and creep-resisting steels - Classification
EN ISO 16834:2012 Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels - Classification (ISO 16834:2012)
EN ISO 2566-1:1999 Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984)
ISO 14344:2010 Welding consumables — Procurement of filler materials and fluxes
EN ISO 18276:2017 Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels - Classification (ISO 18276:2017)
EN 10216-2:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
ISO 3580:2017 Welding consumables — Covered electrodes for manual metal arc welding of creep-resisting steels — Classification
EN 764-5:2014 Pressure equipment - Part 5: Inspection documentation of metallic materials and compliance with the material specification
EN ISO 21952:2012 Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of creep-resisting steels - Classification (ISO 21952:2012)
EN 12952-12:2003 Water-tube boilers and auxiliary installations - Part 12: Requirements for boiler feedwater and boiler water quality
EN 12952-7:2012 Water-tube boilers and auxiliary installations - Part 7: Requirements for equipment for the boiler
EN 10028-2:2017 Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
EN 10228-1:1999 Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection
EN 10253-4:2008/AC:2009 BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
EN ISO 17634:2015 Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels - Classification (ISO 17634:2015)
EN ISO 24598:2012 Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels - Classification (ISO 24598:2012)
EN 10028-7:2016 Flat products made of steels for pressure purposes - Part 7: Stainless steels
ISO 148-1:2016 Metallic materials — Charpy pendulum impact test — Part 1: Test method
EN 10308:2001 Non destructive testing - Ultrasonic testing of steel bars
EN 10217-7:2014 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
ISO 21952:2012 Welding consumables — Wire electrodes, wires, rods and deposits for gas shielded arc welding of creep-resisting steels — Classification
ISO 6303:1981 Pressure vessel steels not included in ISO 2604, Parts 1 to 6 — Derivation of long-time stress rupture properties
ISO 14171:2016 Welding consumables Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels Classification
ISO 16834:2012 Welding consumables — Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels — Classification
EN 10222-3:2017 Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
EN ISO 14341:2011 Welding consumables - Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification (ISO 14341:2010)
EN 10222-5:2017 Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
EN 10228-3:2016 Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings
EN 10021:2006 General technical delivery conditions for steel products
EN ISO 2560:2009 Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification (ISO 2560:2009)
ISO 2566-1:1984 Steel Conversion of elongation values Part 1: Carbon and low alloy steels
EN 10217-2:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
EN ISO 2566-2:1999 Steel - Conversion of elongation values - Part 2: Austenitic steels (ISO 2566-2:1984)
ISO 17632:2015 Welding consumables Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels Classification
EN 10222-4:2017 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
EN ISO 14343:2017 Welding consumables - Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels - Classification (ISO 14343:2017)
EN 10222-2:2017 Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties
EN 760:1996 Welding consumables - Fluxes for submerged arc welding - Classification
ISO 8495:2013 Metallic materials Tube Ring-expanding test
EN 10204:2004 Metallic products - Types of inspection documents
CEN ISO/TR 15608:2017 Welding - Guidelines for a metallic materials grouping system (ISO/TR 15608:2017)
EN ISO 17632:2015 Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels - Classification (ISO 17632:2015)
ISO 17634:2015 Welding consumables Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels Classification
EN ISO 6892-2:2011 Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011)
EN 1600:1997 Welding consumables - Covered electrodes for manual arc welding of stainless and heat resisting steels - Classification
ISO 9001:2015 Quality management systems — Requirements
EN 10217-3:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
EN 12074:2000 Welding consumables - Quality requirements for manufacture, supply and distribution of consumables for welding and allied processes
ISO 6892-2:2011 Metallic materials Tensile testing Part 2: Method of test at elevated temperature
EN ISO 148-1:2016 Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016)
EN ISO 636:2017 Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification (ISO 636:2017)
EN ISO/IEC 17021:2011 Conformity assessment - Requirements for bodies providing audit and certification of management systems (ISO/IEC 17021:2011)
EN 10160:1999 Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
ISO 10893-10:2011 Non-destructive testing of steel tubes Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections
ISO 636:2017 Welding consumables — Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels — Classification
ISO 18275:2011 Welding consumables Covered electrodes for manual metal arc welding of high-strength steels Classification
EN 764-4:2014 Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials
EN 12952-5:2011 Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler
EN 10253-2:2007 Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
EN 757:1997 Welding consumables - Covered electrodes for manual metal arc welding of high strength steels - Classification
EN 10217-5:2002/A1:2005 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
EN 13479:2017 Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
EN ISO 14344:2010 Welding consumables - Procurement of filler materials and fluxes (ISO 14344:2010)
EN 10216-3:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
EN 12952-6:2011 Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more