EN 2424:2008
Current
Current
The latest, up-to-date edition.
Aerospace series - Marking of aerospace products
Published date
28-05-2008
Publisher
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 Aim
4 Marking practice
This standard specifies the rules for the marking of aerospace products.It is applicable whenever referenced in the definition document of the product.
| Committee |
ASD-STAN
|
| DevelopmentNote |
Supersedes UNE EN 2424. (07/2008) Supersedes PREN 2424. (08/2008)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| 09/30204363 DC : 0 | BS EN 6029 - AEROSPACE SERIES - ROD-ENDS, ADJUSTABLE, SINGLE FORK WITH UNJ THREADED SHANK MIN. ENGAGEMENT: 1,5 X THREAD DIAMETER IN CORROSION RESISTING STEEL - DIMENSIONS AND LOADS - INCH SERIES |
| 12/30272552 DC : DRAFT SEP 2012 | BS EN 4124 - AEROSPACE SERIES - SHANK NUTS, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH1302 (WASPALOY), SILVER PLATED ON THREAD, FOR 60 DEGREES SWAGE - CLASSIFICATION: 1210 MPA (AT AMBIENT TEMPERATURE)/730 DEGREES C |
| 11/30244475 DC : 0 | BS EN 4234 - AEROSPACE SERIES - CLAMPS, WORM DRIVE - DIMENSIONS, MASSES |
| BS EN 3228:2010 | Aerospace series. Nuts, hexagonal, plain, reduced height, normal across flats, in steel, cadmium plated. Classification: 900 MPa (at ambient temperature)/235°C |
| 09/30210067 DC : DRAFT SEP 2009 | BS EN 4531-004 - AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY THREADED RING - FLUSH CONTACTS - PART 004: JAM NUT RECEPTACLE - PRODUCT STANDARD |
| BS EN 4165-026:2015 | Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuous Accessories for single module connector. Product standard |
| 09/30204326 DC : 0 | BS EN 4351 - AEROSPACE SERIES - ROD ENDS, WITH SELF-ALIGNING DOUBLE ROW BALL BEARINGS AND THREADED SHANK IN CORROSION RESISTING STEEL - DIMENSIONS AND LOADS - INCH SERIES |
| BS EN 4803:2017 | Aerospace series. Flange couplings. Swivel flange with 4 fastening holes, in heat resisting steel. Inch series |
| 96/702225 DC : 0 | PREN 4228 - AEROSPACE SERIES - PIPE COUPLINGS 60 DEGREES; IN ANODIZED ALUMINIUM ALLOYS; SLEEVES BRAZING |
| I.S. EN 4807:2017 | AEROSPACE SERIES - FLANGE COUPLINGS - WELD COUPLING, 90 DEGREES ELBOW, IN HEAT RESISTING STEEL - INCH SERIES |
| 07/30160989 DC : 0 | BS EN 4199-003 - AEROSPACE SERIES - BONDING STRAPS FOR AIRCRAFT - PART 3: BONDING STRAP ASSEMBLIES WITH FLAT BRAIDED CONDUCTOR COPPER, TIN PLATED -65 DEGREES C UP TO +150 DEGREES C AND COPPER, NICKEL PLATED -65 DEGREES C UP TO +260 DEGREES C - PRODUCT STANDARD |
| BS EN 4652-320:2017 | Aerospace series. Connectors, coaxial, radio frequency Type 3, N interface. Crimp version. Straight plug. Product standard |
| 06/30151481 DC : 0 | BS EN 4537-2 - AEROSPACE SERIES - BUSHES, FLANGED IN CORROSION-RESISTING STEEL WITH SLINER, ELEVATED LOAD - PART 2: DIMENSIONS AND LOADS - INCH SERIES |
| BS EN 6092:2016 | Aerospace series. Receptacle, floating, double lug |
| BS EN 4613:2009 | Aerospace series. Spherical plain bearings in corrosion resisting steel with self-lubricating liner, narrow series. Dimensions and loads. Inch series |
| I.S. EN 4084:2009 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, TWO LUG, WITH COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| I.S. EN 2852:2010 | AEROSPACE SERIES - NUTS, HEXAGONAL, PLAIN, NORMAL HEIGHT, NORMAL ACROSS FLATS, HEAT RESISTING STEEL PASSIVATED - CLASSIFICATION: 1100 MPA/650 DEGREES C |
| BS EN 3435:2010 | Aerospace series. Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, in heat resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315°C |
| 11/30250205 DC : 0 | BS EN 6138 - AEROSPACE SERIES - CAP, PROTECTIVE, NON METALLIC FOR FITTING ENDS <= 3000 PSI HYDRAULIC SYSTEMS |
| BS EN 4812:2017 | Aerospace series. Flange couplings. Gasket seal with nickel alloy C seal on heat resisting steel plate with 4 fastening holes. Inch series |
| I.S. EN 3227:2010 | AEROSPACE SERIES - NUTS, HEXAGONAL, PLAIN, NORMAL HEIGHT, NORMAL ACROSS FLATS, IN STEEL, CADMIUM PLATED, LEFT HAND THREAD - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| I.S. EN 2869:2009 | AEROSPACE SERIES - NUTS, HEXAGONAL, SLOTTED/CASTELLATED, NORMAL HEIGHT, NORMAL ACROSS FLATS, IN HEAT RESISTING STEEL, PASSIVATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| BS EN 4156:2013 | Aerospace series. Rod ends, with self-aligning double row ball bearings and threaded shank in steel. Inner ring and balls in corrosion resisting steel. Dimensions and loads. Inch series |
| 16/30354034 DC : 0 | BS EN 4854-1 - AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, LOW STARTING TORQUE AND LOW FRICTION COEFFICIENT, ELEVATED DUTY CYCLES UNDER LOW OSCILLATIONS AT DIFFERENT OPERATING CONDITIONS, NARROW SERIES - DIMENSIONS AND LOADS |
| BS EN 3382:2012 | Aerospace series. Rings retaining, internal, axial mounting, steel, phosphated |
| 16/30342255 DC : 0 | BS EN 8.3559 - AEROSPACE SERIES- SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, SPIRAL DRIVE RECESS, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| I.S. EN 4830-003:2015 | AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, MODULAR, OPERATING TEMPERATURE 125 DEGREES C, FOR EN 4639-10X CONTACTS - PART 003: MODULE - PRODUCT STANDARD |
| 14/30311582 DC : 0 | BS EN 4692 - AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - LOCKING CLIP |
| NF EN 3636 : 2008 | AEROSPACE SERIES - SCREWS, REDUCED PAN HEAD, OFFSET CRUCIFORM RECESS, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED - CLASSIFICATION: 900 MPA/650 DEGREES C |
| 09/30210122 DC : DRAFT SEP 2009 | BS EN 4531-901 - AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY THREADED RING - FLUSH CONTACTS - PART 901: SQUARE FLANGE RECEPTACLE - PRODUCT STANDARD |
| NF EN 4613 : 2009 | AEROSPACE SERIES - SPHERICAL PLAIN BEARINGS IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, NARROW SERIES - DIMENSIONS AND LOADS - INCH SERIES |
| BS EN 4645-005:2009 | Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder Plug. Product standard |
| 14/30297295 DC : 0 | BS EN 4652-322 - AEROSPACE SERIES - CONNECTORS, COAXIAL, RADIO FREQUENCY - PART 322: TYPE 3, N INTERFACE - CRIMP VERSION - SQUARE FLANGE RECEPTACLE - PRODUCT STANDARD |
| NF EN 4199-005 : 2009 | AEROSPACE SERIES - BONDING STRAPS FOR AIRCRAFT - PART 005: FLAT BRAID CONDUCTORS COPPER, TIN PLATED, -65 DEGREES C UP TO 150 DEGREES C AND COPPER, NICKEL PLATED, -65 DEGREES C UP TO 260 DEGREES C - PRODUCT STANDARD |
| BS EN 4641-100:2015 | Aerospace series. Cables, optical 125 μm diameter cladding Tight structure 62,5/125 μm core GI fibre 1,8 mm outside diameter. Product standard |
| 06/30151549 DC : 0 | BS EN 4614 - AEROSPACE SERIES - SPHERICAL PLAIN BEARINGS IN CORROSION RESISTING STEEL WITH SELF LUBRICATING LINER, WIDE SERIES - DIMENSIONS AND LOADS - INCH SERIES |
| BS EN 3537:2010 | Aerospace series. Nuts, anchor, self-locking, fixed, two lug, with counterbore, in heat resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315°C |
| BS EN 4807:2017 | Aerospace series. Flange couplings. Weld coupling, 90° elbow, in heat resisting steel. Inch series |
| NF EN 4634 : 2010 | AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK HEAD, SIX LOBE RECESS, SHORT THREAD, IN HEAT RESISTING STEEL FE-PA2601 (A286), PASSIVATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| BS EN 3417:2012 | Aerospace series. Rivets, solid, universal head, in nickel base alloy NI-P11, metric series |
| BS EN 3757:2009 | Aerospace series. Nuts, anchor, self-locking, floating, self-aligning, two lugs, in heat resisting steel, MoS2 lubricated. Classification: 900 MPa (at ambient temperature)/315°C |
| 06/30151472 DC : 0 | BS EN 4534-2 - AEROSPACE SERIES - BUSHES, PLAIN IN ALUMINIUM ALLOY WITH SELF-LUBRICATING LINER, ELEVATED LOAD - PART 2: DIMENSIONS AND LOADS - INCH SERIES |
| BS EN 4636:2009 | Aerospace series. Screws, 100° countersunk head, six lobe recess, short thread, in titanium alloy TI-P64001, with aluminium pigmented coating. Classification: 1100 MPa (at ambient temperature) / 315°C |
| BS EN 4694:2017 | Aerospace series. Tie rod with integrated bolts. Assembly code D, E and F |
| I.S. EN 4443:2012 | AEROSPACE SERIES - NUTS, ELLIPTICAL CLINCH, SELF-LOCKING, MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286), MOS[2] COATED, CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| 05/30141104 DC : 0 | BS EN 4623 - AEROSPACE SERIES - INSERTS, MJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), SILVER PLATING |
| BS EN 3710:2008 | Aerospace series. Sockets, bi-hexagonal. Technical specification |
| BS EN 4178:2017 | Aerospace series. Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated. Classification: 1 100 MPa (at ambient temperature) / 315 °C |
| BS EN 3614:2009 | Aerospace series. Bolts, normal hexagonal head, relieved shank, long thread, in heat resisting steel FE-PA2601 (A286), silver plated. Classification: 900 MPa/650°C |
| NF EN 4537-2 : 2009 | AEROSPACE SERIES - BUSHES, FLANGED IN CORROSION-RESISTING STEEL WITH SELF-LUBRICATING LINER, ELEVATED LOAD - PART 2: DIMENSIONS AND LOADS - INCH SERIES |
| 17/30370987 DC : 0 | BS EN 3740 - AEROSPACE SERIES - BOLTS, SHOULDERED, THIN HEXAGONAL HEAD CLOSE TOLERANCE SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS[2] DRYFILM COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| BS EN 4297:2017 | Aerospace series. Nuts, hexagon, self-locking by plastic ring, normal height, normal across flats, in corrosion resisting steel, passivated. Classification: 900 MPa (at ambient temperature) / 120 °C |
| BS EN 4138:2016 | Aerospace series. Screws, pan head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification: 1 100 MPa (at ambient temperature) / 235 °C |
| 12/30260915 DC : 0 | BS EN 4165-013 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 013: CABLE CLAMP 2 AND 4 MODULES FOR CONNECTORS, SERIES 2 AND SERIES 3 - PRODUCT STANDARD |
| BS EN 4811:2017 | Aerospace series. Flange couplings. Gasket seal with fluorocarbon seal on aluminium plate with 4 fastening holes. Inch series |
| 13/30290552 DC : 0 | BS EN 4691-1 AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - PART 1: TECHNICAL SPECIFICATION |
| BS EN 4355:2008 | Aerospace series. Six lobe recess. Drivers, socket |
| 15/30333207 DC : 0 | BS EN 3660-017 - AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 017: CABLE OUTLET, STYLE A, STRAIGHT, UNSEALED, WITH CABLE TIE STRAIN RELIEF - PRODUCT STANDARD |
| 96/702215 DC : 0 | PREN 4146 - AEROSPACE SERIES - PIPE COUPLINGS 60 DEGREES; IN ANODIZED ALUMINIUM ALLOY; UNIONS, STRAIGHT BULKHEAD |
| BS EN 4710-04:2015 | Aerospace series. Quick release fastening systems for non-structural applications Spring clamp. One way tolerance compensation |
| BS EN 3033:2008 | Aerospace series. Nuts, self-locking, hexagonal with captive washer, in heat resisting steel FE-PA2601 (A286), uncoated. Classification: 1100 MPa/425°C |
| BS EN 4702-05:2017 | Aerospace series. Quick release fastening systems for non-structural and lining applications Retaining washer |
| 11/30247482 DC : DRAFT MAY 2011 | BS EN 4710-007 - AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - RETAINING GROMMET |
| BS EN 3636:2008 | Aerospace series. Screws, reduced pan head, offset cruciform recess, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated. Classification: 900 MPa/650°C |
| I.S. EN 3278:2012 | AEROSPACE SERIES - SLEEVES, TUBULAR, PROTRUDING HEAD, IN CORROSION RESISTING STEEL, PASSIVATED (0,25 MM WALL THICKNESS) |
| XP PREN 4012 : 1993 XP | AEROSPACE SERIES - NUTS, BIHEXAGONAL, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), MOS[2] COATED - CLASSIFICATION: 1 550 MPA (AT AMBIENT TEMPERATURE)/425 DEGREE C |
| I.S. EN 4673-004:2010 | AEROSPACE SERIES - INSERTS, UNJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS - PART 004: IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), SILVER PLATING |
| BS EN 4673-006:2010 | Aerospace series. Inserts, UNJ threads, self-locking, with self-broaching keys In heat resisting steel FE-PA2601 (A286), MoS2 coated |
| NF EN 4538-003 : 2011 | AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER ELEVATED LOAD UNDER LOW OSCILLATIONS - NARROW SERIES - DIMENSIONS AND LOADS - PART 003: INCH SERIES WITH LOW FRICTION COEFFICIENT |
| NF EN 3538 : 2010 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, TWO LUG, REDUCED SERIES, WITH COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| 14/30297695 DC : 0 | BS EN 4652-421 - AEROSPACE SERIES - CONNECTORS, COAXIAL, RADIO FREQUENCY - PART 421: TYPE 4, C INTERFACE, CRIMP ASSEMBLY VERSION, RIGHT ANGLE PLUG - PRODUCT STANDARD |
| XP PREN 4120 : 1994 XP | AEROSPACE SERIES - NUTS, BIHEXAGONAL, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY), SILVER PLATED ON THREAD - CLASSIFICATION: 1 210 MPA (AT AMBIENT TEMPERATURE)/730 DEGREE C |
| 01/709645 DC : DRAFT JUN 2001 | PREN 4165-016 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 016: DOUBLE OVAL CHIMNEY FOR ACCESSORIES (1 PER 2 MODULES) - PRODUCT STANDARD |
| NF EN 3750 : 2010 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, 90 DEGREES CORNER, REDUCED SERIES, WITH COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| NF EN 3653 : 2010 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, SELF-ALIGNING, ONE LUG, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| XP PREN 3907 : 1995 XP | AEROSPACE SERIES - BOLTS, DOUBLE HEXAGON HEAD, NORMAL SHANK, LONG THREAD, IN TITANIUM ALLOY TI-P63, MOS[2] COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/350 DEGRES C |
| XP PREN 3867 : 1995 XP | AEROSPACE SERIES - PIPE COUPLINGS, LOOSE FLANGES AND SEALS - FLANGES IN TITANIUM ALLOY TI-P64001 |
| BS EN 3373-011:2009 | Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors Terminal lugs, ring shaped, nickel plated, for crimping on copper conductors, temperature up to 260 °C for metric and inch stud series. Product standard |
| 06/30151478 DC : 0 | BS EN 4536-2 - AEROSPACE SERIES - BUSHES, PLAIN IN CORROSION-RESISTING STEEL WITH SELLINER, ELEVATED LOAD - PART 2: DIMENSIONS AND LOADS - INCH SERIES |
| NF EN 4673-004 : 2011 | AEROSPACE SERIES - INSERTS, UNJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS - PART 004: IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), SILVER PLATING |
| 16/30342253 DC : 0 | BS EN 8.3557 - AEROSPACE SERIES- SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, SPIRAL DRIVE RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| BS EN 4165-024:2017 | Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuous Single module plug. Product standard |
| I.S. EN 3373-008:2012 | AEROSPACE SERIES - TERMINAL LUGS AND IN-LINE SPLICES FOR CRIMPING ON ELECTRIC CONDUCTORS - PART 008: COPPER LUGS NICKEL PLATED RING SHAPED FOR COPPER CONDUCTORS NICKEL PLATED FOR INCH SERIES STUDS UP TO 340 DEGREES C - PRODUCT STANDARD |
| BS EN 4810:2017 | Aerospace series. Flange couplings. Gasket seal with nickel alloy C seal on heat resisting steel plate with 3 fastening holes. Inch series |
| 00/707099 DC : DRAFT MAR 2000 | PREN 3545-008 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, WITH SEALED AND NON-SEALED REAR - PLASTIC HOUSING, LOCKING DEVICE, OPERATING TEMPERATURES - 55 DEGREES C TO 175 DEGREES C - PART 8: TOOLS FOR ASSEMBLY - REMOVAL OF CODING AND ATTACHMENT SYSTEMS - PRODUCT STANDARD |
| 14/30300804 DC : 0 | BS EN 4165 - AEROSPACE SERIES - CONNECTOR, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURES 175 DEGREES C CONTINUOUS - PART 024: SINGLE MODULE PLUG - PRODUCT STANDARD |
| I.S. EN 4536-2:2009 | AEROSPACE SERIES - BUSHES, PLAIN IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, ELEVATED LOAD - PART 2: DIMENSIONS AND LOADS - INCH SERIES |
| I.S. EN 4537-2:2009 | AEROSPACE SERIES - BUSHES, FLANGED IN CORROSION-RESISTING STEEL WITH SELF-LUBRICATING LINER, ELEVATED LOAD - PART 2: DIMENSIONS AND LOADS - INCH SERIES |
| 11/30254177 DC : 0 | BS EN 4652-110 - AEROSPACE SERIES - CONNECTORS, COAXIAL, RADIO FREQUENCY - PART 110: TYPE 1 BNC INTERFACE - CLAMP ASSEMBLY VERSION - STRAIGHT PLUG - PRODUCT STANDARD |
| 14/30310863 DC : 0 | BS EN 4833 - AEROSPACE SERIES - PIPE COUPLING 24 DEGREE CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING - FLARED END - INCH SERIES - WITH EXTRA FINE THREAD PITCH |
| 08/30195533 DC : 0 | BS EN 2648 - AEROSPACE SERIES - WASHERS, CONCAVE, IN ALLOY STEEL, CADMIUM PLATED |
| 14/30310864 DC : 0 | BS EN 4834 - AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREE CONE UP TO 35000 KPA (5080 PSI) PORT FOR RING LOCKED FITTING - INCH SERIES - GEOMETRIC CONFIGURATION |
| I.S. EN 4199-005:2009 | AEROSPACE SERIES - BONDING STRAPS FOR AIRCRAFT - PART 005: FLAT BRAID CONDUCTORS COPPER, TIN PLATED -65 DEGREE C UP TO 150 DEGREE C AND COPPER, NICKEL PLATED, -65 DEGREE C UP TO 260 DEGREE C - PRODUCT STANDARD |
| I.S. EN 4641-100:2015 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 100: TIGHT STRUCTURE 62,5/125 [MU]M CORE GI FIBRE 1,8 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| XP PREN 4117 : 1994 XP | AEROSPACE SERIES - NUTS, BIHEXAGONAL, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), SILVER PLATED ON THREAD - CLASSIFICATION: 1 550 MPA (AT AMBIENT TEMPERATURE)/600 DEGREE C |
| NF EN 3660-017 : 2009 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 017: CABLE OUTLET, STYLE A, STRAIGHT, UNSEALED, WITH CABLE TIE STRAIN RELIEF - PRODUCT STANDARD |
| XP PREN 4123 : 1994 XP | AEROSPACE SERIES - SHANK NUTS, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), SILVER PLATED ON THREAD - CLASSIFICATION: 1 550 MPA (AT AMBIENT TEMPERATURE)/600 DEGREE C |
| XP PREN 4166 : 1995 XP | AEROSPACE SERIES - CLIPS, SPRING TENSION, THREE PARTS - PTFE BUSHES |
| BS EN 4652-001:2015 | Aerospace series. Connectors, coaxial, radio frequency Technical specification |
| PREN 2335 : 200P1 | AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN IN CORROSION RESISTING STEEL WITHOUT ASSEMBLY SLOT - DIMENSIONS AND LOADS |
| 01/709626 DC : 0 | PREN 4165-009 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 009: RACK AND PANEL PLUG FOR 2 OR 4 MODULES, SERIES 3 - PRODUCT STANDARD |
| PREN 2555 : 2 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREES COUNTERSUNK NORMAL HEAD, WITH DOME, IN ALUMINIUM ALLOY 5056A, INCH BASED SERIES |
| PREN 2811 : 200P1 | AEROSPACE SERIES - NUTS, HEXAGON, SLOTTED/CASTELLATED IN STEEL CADMIUM PLATED - CLASSIFICATION: 1100 MPA/235 DEGREES C |
| PREN 2922 : 200P3 | AEROSPACE SERIES - NUTS, HEXAGON, PLAIN, REDUCED HEIGHT, REDUCED ACROSS FLATS, IN HEAT RESISTING STEEL, PASSIVATED, LEFT HAND THREAD - CLASSIFICATION: 600 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| PREN 3016 : 200P1 | AEROSPACE SERIES - WASHERS COUNTERSUNK, LOAD SPREADING - HEAT RESISTING STEEL |
| XP PREN 2932 : 1993 XP | AEROSPACE SERIES - BOLTS T-HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL FE-PA92HT (A286) SILVER PLATED - CLASSIFICATION: 900 MPA/650 DEGREE C |
| PREN 2414 : 200P1 | AEROSPACE SERIES - WASHERS, CHAMFERED, WITH COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED |
| PREN 2264 : 1995 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, TWO LUG, INCREMENTAL COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS2 LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES C |
| BS EN 4695:2017 | Aerospace series. Tie Rod with integrated bolts. Assembly Code G, H and K |
| NF EN 4641-105 : 2011 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 105: SEMI-LOOSE, RUGGEDIZED QUADRAXIAL CONSTRUCTION 62,5/125 [MU]M GI FIBRE NOMINAL, 5,72 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| XP PREN 2942 : 1992 XP | AEROSPACE SERIES - INSERT, SCREW THREAD, HELICAL COIL, SELF-LOCKING, IN HEAT RESISTING ALLOY, NICKEL BASE ALLOY (INCO X750 - EN 3018), SILVER PLATED |
| PREN 4531-003 : 200P2 | AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY THREADED RING - FLUSH CONTACTS - PART 003: SQUARE FLANGE RECEPTACLE - PRODUCT STANDARD |
| XP PREN 2928 : 1993 XP | AEROSPACE SERIES - BOLTS WITH DOUBLE HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), SILVER PLATED - CLASSIFICATION: 1 275 MPA/650 DEGREE C |
| PREN 2867 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, ONE LUG, WITH COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1 110 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 4178 : 200P2 | AEROSPACE SERIES - SCREWS, PAN HEAD, SIX LOBE RECESS, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN TITANIUM ALLOY, ANODIZED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 3140 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREES COUNTERSUNK NORMAL HEAD, IN CORROSION RESISTING STEEL FE-PA92HT, PASSIVATED, INCH BASED SERIES |
| PREN 3144 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID 100 DEGREES COUNTERSUNK NORMAL HEAD, IN NICKEL BASE ALLOY NI-P11, INCH BASED SERIES |
| I.S. EN 4499:2009 | AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK REDUCED HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, WITH ALUMINIUM PIGMENTED COATING - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 3373-007 : 200P1 | AEROSPACE SERIES - TERMINAL LUGS AND IN-LINE SPLICES FOR CRIMPING ON ELECTRICAL CONDUCTORS - PART 007: NICKEL PLATED ALUMINIUM TERMINAL LUGS FOR CRIMPING ON NICKEL PLATED ALUMINIUM CABLE FOR INCH SERIES STUDS - PRODUCT STANDARD |
| PREN 4803 : DRAFT 2015 | AEROSPACE SERIES - FLANGE COUPLINGS - SWIVEL FLANGE WITH 4 FASTENING HOLES, IN HEAT RESISTING STEEL - INCH SERIES |
| PREN 4811 : DRAFT 2015 | AEROSPACE SERIES - FLANGE COUPLINGS - GASKET SEAL WITH FLUOROCARBON SEAL ON ALUMINIUM PLATE WITH 4 FASTENING HOLES - INCH SERIES |
| PREN 4692 : DRAFT 2015 | AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - LOCKING CLIP |
| NF EN 3728 : 2008 | AEROSPACE SERIES - SHAFT-NUTS, SELF-LOCKING, LEFT-HAND THREAD, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED |
| PREN 4311 : 200P1 | AEROSPACE SERIES - STUDS, COURSE TOLERANCE REDUCED SHANK, MEDIUM LENGTH THREADS, IN HEAT AND CORROSION RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 4357 : 200P1 | AEROSPACE SERIES - SIX LOBE RECESS - DRIVERS, HANDLE |
| PREN 3230 : 200P2 | AEROSPACE SERIES - NUTS, HEXAGON, SLOTTED/CASTELLATED, REDUCED HEIGHT, NORMAL ACROSS FLATS, IN STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 4399 : 200P1 | AEROSPACE SERIES - RINGS, THREADED, SELF-LOCKING, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED |
| PREN 3712 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, ONE LUG, FIXED, REDUCED SERIES, WITH COUNTERBORE, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| UNI EN 3539 : 2011 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, ONE LUG, FIXED, WITH COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| I.S. EN 4702-05:2017 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 05: RETAINING WASHER |
| PREN 2856 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, CLOSED CORNER, REDUCED SERIES, WITH COUNTERBORE - CLASSIFICATION: 1100 MPA/235 DEGREES C |
| PREN 2876 : 200P1 | AEROSPACE SERIES - NUTS, HEXAGON, PLAIN, REDUCED HEIGHT, NORMAL ACROSS FLATS, IN ALUMINIUM ALLOY, ANODIZED - CLASSIFICATION: 450 MPA (AT AMBIENT TEMPERATURE)/120 DEGREES C |
| PREN 3636 : 200P1 | AEROSPACE SERIES - SCREWS, REDUCED PAN HEAD, OFFSET CRUCIFORM RECESS, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL FE PA92HT (A286), SILVER PLATED - CLASSIFICATION: 900 MPA/650 DEGREES C |
| PREN 3243 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - FERRULE, WELDED, WITH DYNAMIC BEAM SEAL END |
| PREN 3326 : 200P1 | AEROSPACE SERIES - BOLTS, D-HEAD, CLOSE TOLERANCE, MEDIUM THREAD LENGTH, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCO 718) - CLASSIFICATION: 1275 MPA/650 DEGREES C, UNPLATED |
| PREN 3392 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM ALLOY 2117, ANODIZED OR CHROMATED, METRIC SERIES |
| PREN 3417 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, UNIVERSAL HEAD, IN NICKEL BASE ALLOY NI-P11 - METRIC SERIES |
| PREN 3402 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREE NORMAL COUNTERSUNK HEAD, IN ALUMINIUM ALLOY 7050, ANODIZED OR CHROMATED, METRIC SERIES |
| PREN 3416 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, UNIVERSAL HEAD, IN NICKEL BASE ALLOY NI-P11, CADMIUM PLATED, METRIC SERIES |
| PREN 3412 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREE NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 5056A, ANODIZED OR CHROMATED, METRIC SERIES |
| PREN 2336 : 200P1 | AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN IN STEEL WITH ASSEMBLY SLOTS - DIMENSIONS AND LOADS |
| PREN 2680 : 200P3 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, SELF-ALIGNING, TWO LUG, IN ALLOY STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 2646 : 200P3 | AEROSPACE SERIES - NIPPLES, LUBRICATING, AXIAL TYPE, IN STEEL, CADMIUM PLATED |
| PREN 2809 : 200P2 | AEROSPACE SERIES - NUTS, HEXAGON, SLOTTED/CASTELLATED, REDUCED HEIGHT, NORMAL ACROSS FLATS, IN HEAT RESISTING STEEL, SILVER PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| PREN 3084 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS 8 DEGREE 30 MINUTES IN TITANIUM ALLOY - UNIONS, LONG, WELDED, FOR REPAIR |
| I.S. EN 3843:2010 | AEROSPACE SERIES - NUTS, BIHEXAGONAL, SELF-LOCKING, WITH COUNTERBORE, IN HEAT RESISTING STEEL, PASSIVATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| PREN 3228 : 200P1 | AEROSPACE SERIES - NUTS, HEXAGON, PLAIN, REDUCED HEIGHT, NORMAL ACROSS FLATS, IN STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 3244 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - UNIONS, DOUBLE ENDED |
| PREN 3138 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID 100 DEGREES COUNTERSUNK NORMAL HEAD WITH DOME, IN CORROSION RESISTING STEEL FE-PA92HT, PASSIVATED, INCH BASED SERIES |
| PREN 3248 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - ADAPTERS, REDUCED PIPE END WITH LOCKING RING |
| PREN 3266 : 200P2 | AEROSPACE SERIES - PIPE COUPLING IN TITANIUM ALLOY - BULKHEAD NUTS |
| PREN 2647 : 1 | AEROSPACE SERIES - NUTS, HEXAGONAL, SELF-LOCKING, BALL SEAT, IN ALLOY STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES C |
| PREN 2754 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING TWO LUG, FLOATING WITH COUNTERBORE - CLASSIFICATION: 1100 MPA/235 DEGREES C |
| PREN 2556 : 2 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREES COUNTERSUNK NORMAL HEAD, WITH DOME, IN ALUMINIUM ALLOY 5056A, ANODIZED OR CHROMATED INCH BASED SERIES |
| PREN 2881 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FUEL RESISTANT, SEALING, FLOATING, TWO LUG, WITH COUNTERBORE, IN CORROSION RESISTING STEEL, PASSIVATED, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/120 DEGREES C |
| PREN 2913 : 1997 | AEROSPACE SERIES - WASHERS, FLAT, LARGE DIAMETER IN ALLOY STEEL, CADMIUM PLATED |
| PREN 2588 : 200P1 | AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN IN CORROSION RESISTING STEEL WITH ASSEMBLY SLOTS - DIMENSIONS AND LOADS |
| PREN 4645-003 : 200P1 | AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY THREADED RING, SELF-LOCKING 1,25 MM DIAMETER FERRULE WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 003: SQUARE FLANGE RECEPTACLE - PRODUCT STANDARD |
| NF EN 4124 : 2005 | AEROSPACE SERIES - SHANK NUTS, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH1302 (WASPALOY), SILVER PLATED ON THREAD, FOR 60 DEGREES SWAGE - CLASSIFICATION: 1 210 MPA (AT AMBIENT TEMPERATURE)/730 DEGREES C |
| PREN 4119 : 200P1 | AEROSPACE SERIES - NUTS, BIHEXAGONAL, SELF-LOCKING, DEEP COUNTERBORED, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED ON THREAD - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C |
| PREN 4130 : 200P1 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN TITANIUM ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREE C |
| PREN 4139 : 200P2 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| PREN 3327 : 200P1 | AEROSPACE SERIES - BOLTS, DOUBLE HEXAGON HEAD, CLOSE TOLERANCE MEDIUM THREAD LENGTH IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), UNCOATED - CLASSIFICATION: 1275 MPA/650 DEGREES C |
| PREN 4804 : DRAFT 2015 | AEROSPACE SERIES - FLANGE COUPLINGS - SWIVEL FLANGE WITH 4 FASTENING HOLES, IN NICKEL ALLOY - INCH SERIES |
| PREN 4710-05 : DRAFT 2014 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 05: SPRING CLAMP - TWO WAYS TOLERANCE COMPENSATION |
| PREN 4265 : 200P2 | AEROSPACE SERIES - BEARING SPHERICAL PLAIN, METAL TO METAL IN CORROSION RESISTING STEEL - WIDE SERIES - DIMENSIONS AND LOADS - INCH SERIES |
| PREN 4810 : DRAFT 2015 | AEROSPACE SERIES - FLANGE COUPLINGS - GASKET SEAL WITH NICKEL ALLOY C SEAL ON HEAT RESISTING STEEL PLATE WITH 3 FASTENING HOLES - INCH SERIES |
| PREN 4652-321 : DRAFT 2016 | AEROSPACE SERIES - CONNECTORS, COAXIAL, RADIO FREQUENCY - PART 321: TYPE 3, N INTERFACE - CRIMP ASSEMBLY VERSION - RIGHT ANGLE PLUG - PRODUCT STANDARD |
| PREN 6094 : 200P2 | AEROSPACE SERIES - WASHER, SPRING, COUNTERSUNK |
| PREN 4165-006 : 200P1 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREE C CONTINUOUS - PART 006: PLUG FOR 2 AND 4 MODULES, SERIES 2 - PRODUCT STANDARD |
| PREN 4553 : 200P1 | AEROSPACE SERIES - PIPE COUPLING, 37 DEGREES, SPHERICAL, IN HEAT RESISTING STEEL - ELBOW 90 DEGREES NIPPLES, WELDED - INCH SERIES |
| PREN 4562 : 200P1 | AEROSPACE SERIES - PIPE COUPLING, WELDED, IN HEAT RESISTING STEEL - REDUCTORS - INCH SERIES |
| PREN 4624 : 200P1 | AEROSPACE SERIES - INSERTS, MJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH1302 (WASPALOY), SILVER PLATED |
| PREN 4249 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, SINGLE LUG, REDUCED SERIES, WITH COUNTERBORE, IN HEAT RESISTING STEEL, SILVER PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 4710-04 : DRAFT 2014 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 04: SPRING CLAMP - ONE WAY TOLERANCE COMPENSATION |
| UNI EN 3383 : 2012 | AEROSPACE SERIES - RINGS RETAINING, INTERNAL, AXIAL MOUNTING, STEEL, VACUUM CADMIUM PLATED |
| PREN 4404 : 200P2 | AEROSPACE SERIES - RIVETS, SOLID, UNIVERSAL HEAD, IN TITANIUM ALLOY TI 44,5 CB, WITH ALUMINIUM PIGMENTED COATING, METRIC SERIES |
| PREN 4701-003 : 200P1 | AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, MODULAR, OPERATING TEMPERATURE 125 DEGREES C, FOR EN 4531-101 CONTACTS - PARTS 003: MODULE SERIES 2 - PRODUCT STANDARD |
| PREN 4497 : 200P1 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, WITH ALUMINIUM PIGMENTED COATING - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 3713 : 200P1 | AEROSPACE SERIES - NUTS, SELF-LOCKING, BIHEXAGONAL, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 4359 : 200P1 | AEROSPACE SERIES - SIX LOBE RECESS - DRIVERS - TECHNICAL SPECIFICATION |
| PREN 4401 : 200P1 | AEROSPACE SERIES - LOCKBOLTS, PROTRUDING HEAD, SHEARTYPE, CLOSE TOLERANCE, IN TITANIUM ALLOY TI-P64001, WITH ALUMINIUM PIGMENTED COATING, METRIC SERIES - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 3246 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - UNIONS, BULKHEAD |
| PREN 4805 : DRAFT 2015 | AEROSPACE SERIES - FLANGE COUPLINGS - WELD COUPLING, STRAIGHT, IN HEAT RESISTING STEEL - INCH SERIES |
| PREN 4302 : 200P1 | AEROSPACE SERIES - OPEN RING INSERT TOOL, SQUARE DRIVE |
| PREN 4309 : 200P1 | AEROSPACE SERIES - NUTS, HEXAGON, SELF-LOCKING BY PLASTIC RING, NORMAL HEIGHT, NORMAL ACROSS FLATS, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/120 DEGREES C |
| PREN 4498 : 200P1 | AEROSPACE SERIES - BOLTS, LARGE BIHEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN HEAT RESISTING NICKEL BASE ALLOY, PASSIVATED, WITH ALUMINIUM PIGMENTED COATING - CLASSIFICATION: 1 550 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 4557 : 200P1 | AEROSPACE SERIES - PIPE COUPLING, 37 DEGREES, SPHERICAL, IN HEAT RESISTING STEEL - TEES NIPPLES, WELDED - INCH SERIES |
| PREN 4534-2 : 200P2 | AEROSPACE SERIES - BUSHES, PLAIN IN ALUMINIUM ALLOY WITH SELF-LUBRICATING LINER, ELEVATED LOAD - PART 2: DIMENSIONS AND LOADS - INCH SERIES |
| PREN 3724 : 200P1 | AEROSPACE SERIES - BOLTS, DOUBLE HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN TITANIUM ALLOY TI-P63, MOS[2] COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE) |
| PREN 3729 : 200P1 | AEROSPACE SERIES - RINGS, THREADED, SELF-LOCKING, LEFT-HAND THREAD, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED |
| PREN 3739 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREES NORMAL COUNTERSUNK HEAD, IN TITANIUM ALLOY TI 45,5 CB, METRIC SERIES |
| PREN 4590 : 200P1 | AEROSPACE SERIES - RETAINERS, SPRING, SHEET METAL, FOR SELF-LOCKING BARREL NUTS, IN CORROSION RESISTING STEEL, PASSIVATED |
| PREN 4832 : DRAFT 2017 | AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING AND RING-LOCKED FITTING-REDUCER - INCH SERIES - TECHNICAL SPECIFICATION |
| PREN 4854-2 : 200P1 | AEROSPACE SERIES - BEARING, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, LOW STARTING TORQUE AND LOW FRICTION COEFFICIENT, ELEVATED DUTY CYCLES UNDER LOW OSCILLATIONS AT DIFFERENT OPERATING CONDITIONS - PART 2: DIMENSIONS AND LOADS FOR WIDE SERIES |
| PREN 3766 : 200P1 | AEROSPACE SERIES - RIVETS, BLIND, NUT PLATE, UNIVERSAL HEAD, IN HEAT RESISTING STEEL, PASSIVATED, METRIC SERIES |
| PREN 3824 : 200P1 | AEROSPACE SERIES - CLINCH-NUTS, BLIND, SELF-LOCKING, WITH COUNTERBORE, IN CORROSION RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 600 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 3268 : 200P3 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - PRESSURE PLUGS |
| PREN 4812 : DRAFT 2015 | AEROSPACE SERIES - FLANGE COUPLINGS - GASKET SEAL WITH NICKEL ALLOY C SEAL ON HEAT RESISTING STEEL PLATE WITH 4 FASTENING HOLES - INCH SERIES |
| PREN 4702-05 : DRAFT 2016 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS WITH NON METALLIC STUD FOR NON-STRUCTURAL APPLICATIONS - PART 05: RETAINING WASHER |
| PREN 4022 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - ELBOWS 90 DEGREE, BULKHEAD, WELDED |
| PREN 4077 : 200P2 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, THREADED TO HEAD, IN CORROSION RESISTING STEEL, PASSIVATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C |
| PREN 4113 : 200P2 | AEROSPACE SERIES - CLAMPS, LOOP ("P" TYPE) IN CORROSION RESISTING STEEL, PASSIVATED, WITH RUBBER CUSHIONING - DIMENSIONS, MASSES |
| PREN 4354 : 200P1 | AEROSPACE SERIES - SIX LOBE RECESS - DRIVERS, RELIEVED |
| PREN 4128 : 200P3 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE SHANK, SHORT THREAD, IN HEAT RESISTING NICKEL BASE ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1250 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 4673-004 : 200P1 | AEROSPACE SERIES - INSERTS, UNJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS - PART 004: IN HEAT RESISTING NICKEL BASE ALLOY - NI-P100HT (INCONEL 718), SILVER PLATING |
| PREN 4040 : 200P1 | AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER WITH WIDE INNER RING - ELEVATED LOADS AT AMBIENT TEMPERATURE - DIMENSIONS AND LOADS |
| PREN 4072 : 200P3 | AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE SHANK, SHORT THREAD, IN TITANIUM ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 4112 : 200P2 | PINS, PARALLEL, IN CORROSION RESISTING STEEL, PASSIVATED |
| PREN 4120 : 200P1 | AEROSPACE SERIES - NUTS, BIHEXAGONAL, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY), SILVER PLATED ON THREAD - CLASSIFICATION: 1210 MPA (AT AMBIENT TEMPERATURE)/730 DEGREE C |
| PREN 4135 : 200P1 | AEROSPACE SERIES - BOLTS, NORMAL BI-HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN TITANIUM ALLOY, ANODIZED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| PREN 4153 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM ALLOY 2219, ANODIZED OR CHROMATED, METRIC SERIES |
| PREN 4193 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, REDUCED, BULKHEAD LONG |
| PREN 4673-006 : 200P1 | AEROSPACE SERIES - INSERTS, UNJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS - PART 006: IN HEAT RESISTING STEEL FE-PA2601 (A286), MOS[2] COATED |
| PREN 4165-025 : 200P2 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 025: MODULE RECEPTACLE - PRODUCT STANDARD |
| PREN 4189 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, BULKHEAD BRANCH, LONG |
| PREN 3778 : 200P1 | AEROSPACE SERIES - PINS, QUICK RELEASE, TWO BALLS, DOUBLE ACTING, SINGLE LOCKING, "L" TYPE HANDLE, IN CORROSION RESISTING STEEL |
| PREN 3845 : 200P1 | AEROSPACE SERIES - RINGS, RETAINING, RADIAL MOUNTING, IN CORROSION RESISTING STEEL, PASSIVATED |
| PREN 4640-003 : 200P1 | AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, RACK AND PANEL, MULTICONTACT, 1,25 DIAMETER FERRULE, WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 003: PLUG OPTICAL CONNECTOR - PRODUCT STANDARD |
| PREN 3902 : 200P1 | AEROSPACE SERIES - WASHERS FOR RIVET ASSEMBLIES, IN ALUMINIUM ALLOY, ANODIZED, METRIC SERIES |
| PREN 4163 : 200P2 | AEROSPACE SERIES - SCREWS 100 DEGREES COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 4194 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, REDUCED, BULKHEAD |
| PREN 4201 : 200P2 | AEROSPACE SERIES - WASHERS, 100 DEGREES DIMPLED, IN TITANIUM |
| PREN 3241 : 200P2 | AEROSPACE SERIES - NUTS, SELF-LOCKING, CLIP, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER COATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 4539-2 : 200P1 | AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER - ELEVATED LOAD UNDER LOW OSCILLATIONS - WIDE SERIES - DIMENSIONS AND LOADS - INCH SERIES |
| PREN 3851 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY TI-P64001 - SWIVEL NUTS, STRAIGHT |
| PREN 3858 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY TI-P64001 - THRUST WIRES IN STEEL FE-PA13 |
| PREN 6090 : 200P1 | AEROSPACE SERIES - WASHER, RETAINING |
| PREN 6120 : 200P1 | AEROSPACE SERIES - PINS, CLOSE TOLERANCE, SWAGE LOCKING, PROTRUDING HEAD, SHEAR TYPE, IN ALUMINIUM ALLOY 7050, CHEMICAL FILM - INCH SERIES |
| PREN 4710-07 : DRAFT 2014 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 07: RETAINING GROMMET |
| PREN 4234 : 200P4 | AEROSPACE SERIES - CLAMPS, WORM DRIVE - DIMENSIONS, MASSES |
| I.S. EN 3631:2014 | AEROSPACE SERIES - FLUID FITTINGS, FLANGED, 90 DEGREES ELBOWED - SEALING BY O-RING FOR 0,8 MM THICK TUBES |
| PREN 3373-010 : 200P1 | AEROSPACE SERIES - TERMINAL LUGS AND IN-LINE SPLICES FOR CRIMPING ON ELECTRIC CONDUCTORS - PART 010: TERMINAL LUGS, RING SHAPED, TIN PLATED, FOR CRIMPING ON COPPER CONDUCTORS, TEMPERATURE UP TO 150 DEGREES C FOR METRIC AND INCH STUD SERIES - PRODUCT STANDARD |
| PREN 4165-004 : 200P1 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREE C CONTINUOUS - PART 004: STACKABLE MOUNTING RECEPTACLE 2 AND 4 MODULES SERIES 2 |
| PREN 4859 : DRAFT 2017 | AEROSPACE SERIES - SENSOR BASED CLAMP LOAD DETERMINATION/HIGH TENSILE BOLTS - TECHNICAL SPECIFICATION |
| PREN 4025 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - ELBOWS 45 MINUTES, BULKHEAD |
| PREN 4645-005 : 200P1 | AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY THREADED RING, SELF-LOCKING 1,25 MM DIAMETER FERRULE WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 005: PLUG - PRODUCT STANDARD |
| PREN 6057 : 200P1 | AEROSPACE SERIES - ROD-ENDS, WITH BEARING PER EN4265 IN CORROSION RESISTING STEEL, INTERNAL THREADED SHANK - DIMENSIONS AND LOADS - INCH SERIES |
| PREN 4641-202 : DRAFT 2017 | AEROSPACE SERIES - CABLES, OPTICAL, 125 [MU]M DIAMETER CLADDING - PART 202: SEMI-LOOSE, RUGGEDIZED SIMPLEX CONSTRUCTION 9/125 [MU]M SM FIBRE NOMINAL 2,74 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| PREN 4084 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, TWO LUG, WITH COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| PREN 4117 : 200P1 | AEROSPACE SERIES - NUTS, BIHEXAGONAL, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), SILVER PLATED ON THREAD - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/600 DEGREE C |
| PREN 4138 : 200P2 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 4165-027 : DRAFT 2014 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 027: RACK AND PANEL REAR MOUNTED PLUG FOR 2 AND 4 MODULES, SERIES 3 - PRODUCT STANDARD |
| PREN 4192 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, REDUCED, BULKHEAD BRANCH |
| PREN 4801 : DRAFT 2015 | AEROSPACE SERIES - FLANGE COUPLINGS - SWIVEL FLANGE WITH 3 FASTENING HOLES, IN HEAT RESISTING STEEL - INCH SERIES |
| PREN 4806 : DRAFT 2015 | AEROSPACE SERIES - FLANGE COUPLINGS - WELD COUPLING, STRAIGHT, IN NICKEL ALLOY - INCH SERIES |
| PREN 3536 : 200P2 | AEROSPACE SERIES - NUTS, HEXAGON, SELF-LOCKING, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| PREN 6093 : 200P1 | AEROSPACE SERIES - RECEPTACLE, FLOATING, SINGLE LUG |
| PREN 4185 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, BULKHEAD LONG |
| PREN 3904 : 200P1 | AEROSPACE SERIES - WASHERS, WIRE LOCKING, IN ALUMINIUM ALLOY, ANODIZED |
| PREN 3384 : 200P1 | AEROSPACE SERIES - RINGS RETAINING, EXTERNAL, AXIAL MOUNTING, STEEL, PHOSPHATED |
| PREN 3399 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREES NORMAL COUNTERSUNK HEAD, IN ALUMINIUM ALLOY 5056A, METRIC SERIES |
| PREN 4165-009 : 200P1 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREE C CONTINUOUS - PART 009: RACK AND PANEL PLUG FOR 2 AND 4 MODULES, SERIES 3 - PRODUCT STANDARD |
| PREN 4165-012 : 200P1 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREE C CONTINUOUS - PART 012: FLANGE MOUNTING RECEPTACLE 2 AND 4 MODULES, SERIES 3 - PRODUCT STANDARD |
| PREN 4165-011 : 200P1 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREE C CONTINUOUS - PART 011: FLANGE MOUNTING RECEPTACLE 2 AND 4 MODULES, SERIES 2 - PRODUCT STANDARD |
| PREN 3613 : 200P1 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), SILVER PLATED - CLASSIFICATION: 1275 MPA/650 DEGREES C |
| PREN 4165-016 : 200P1 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREE C CONTINUOUS - PART 016: DOUBLE OVAL CHIMNEY FOR ACCESSORY (1 PER 2 MODULES) - PRODUCT STANDARD |
| I.S. EN 4074:2009 | AEROSPACE SERIES - SCREWS, PAN HEAD, SIX LOBE RECESS, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN TITANIUM ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 3711 : 200P1 | AEROSPACE SERIES - WRENCH-DOUBLE ENDED, BI-HEXAGONAL STRAIGHT, CRANKED, OFFSET |
| PREN 4537-2 : 200P1 | AEROSPACE SERIES - BUSHES, FLANGED IN CORROSION-RESISTING STEEL WITH SELF-LUBRICATING LINER, ELEVATED LOAD - PART 2: DIMENSIONS AND LOADS - INCH SERIES |
| PREN 3155-001 : 200P5 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 001: TECHNICAL SPECIFICATION |
| PREN 3626 : 200P2 | AEROSPACE SERIES - NUTS, HEXAGON, SELF-LOCKING, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 4639-005 : 200P1 | AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, MODULAR, MULTICONTACT, 1,25 DIAMETER FERRULE, WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 005: REMOVABLE ALIGNMENT SLEEVE HOLDER - PRODUCT STANDARD |
| PREN 3686 : 200P1 | AEROSPACE SERIES - BOLTS WITH DOUBLE HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL, FE-PA92HT (A286), SILVER PLATED - CLASSIFICATION: 1100 MPA/650 DEGREES C |
| PREN 3757 : 200P2 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING FLOATING, SELF-ALIGNING TWO LUG, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED-CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 3789 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES - PROTECTIVE PLUGS WITH EXTERNAL THREADS |
| PREN 3763 : 200P2 | AEROSPACE SERIES - NUTS, HEXAGONAL, SELF-LOCKING, BALL SEAT, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 4641-104 : 200P1 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 104: SEMI-LOOSE, RUGGEDIZED DUPLEX CONSTRUCTION 62,5/125 [MU]M GI FIBRE NOMINAL, 4,95 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| PREN 4702-04 : DRAFT 2016 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS WITH NON METALLIC STUD FOR NON-STRUCTURAL APPLICATIONS - PART 04: SPRING CLAMP |
| PREN 3821 : 200P2 | AEROSPACE SERIES - WASHERS, CHAMFERED, WITH COUNTERBORE, IN HEAT RESISTING STEEL, PASSIVATED |
| PREN 3832 : 200P1 | AEROSPACE SERIES - BOLTS, DOUBLE HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718) - CLASSIFICATION: 1 550 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| PREN 3835 : 200P1 | AEROSPACE SERIES - WASHERS, 100 DEGREES DIMPLED, IN HEAT RESISTING STEEL, PASSIVATED |
| PREN 3834 : 200P2 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, TWO LUG, INCREMENTAL COUNTERBORE, IN CORROSION RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 3852 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY TI-P64001 - STRAIGHT UNIONS, WELDED, THREADED |
| PREN 4303 : 200P1 | AEROSPACE SERIES - SLEEVES, TUBULAR, FOR TENSION SCREWS WITH FLUSH HEAD, IN CORROSION RESISTING STEEL, PASSIVATED, (0,25 MM WALL THICKNESS) |
| PREN 3856 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY TI-P64001 - SWIVEL NUTS FOR THRUST WIRE |
| PREN 4360 : 200P3 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREES COUNTERSUNK REDUCED HEAT WITH DOME, IN ALUMINIUM ALLOY 7050, ANODIZED OR CHROMATED, METRIC SERIES |
| PREN 4407 : 200P1 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, THREADED TO HEAD, IN TITANIUM ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 3908 : 200P2 | AEROSPACE SERIES - NIPPLES, LUBRICATING, AXIAL TYPE, IN CORROSION RESISTING STEEL, PASSIVATED |
| PREN 4496 : 200P1 | AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, WITH ALUMINIUM PIGMENTED COATING - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 4027 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, BRANCH WITH SWIVEL NUT |
| PREN 4556 : 200P1 | AEROSPACE SERIES - PIPE COUPLING, 37 DEGREES, IN HEAT RESISTING STEEL - CAP ASSEMBLIES - INCH SERIES |
| PREN 4591 : 200P1 | AEROSPACE SERIES - NUTS, BARREL, SELF-LOCKING, FLOATING, SELF-ALIGNING, IN HEAT RESISTING NICKEL BASE ALLOY, MOS[2] LUBRICATED - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 4012 : 200P1 | AEROSPACE SERIES - NUTS, BIHEXAGONAL, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), MOS[2] COATED - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/425 DEGREE C |
| PREN 4026 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES |
| PREN 4020 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - ELBOWS 90 DEGREES, WELDED END WITH THRUST WIRE NUT |
| PREN 3631 : 200P2 | AEROSPACE SERIES - FLUID FITTINGS, FLAGED, 90 DEGREES ELBOWED - SEALING BY O-RING FOR 0,8 MM THICK TUBES |
| PREN 3776 : 200P1 | AEROSPACE SERIES - PINS, QUICK RELEASE, TWO BALLS, SINGLE ACTING, SINGLE LOCKING, "L" TYPE HANDLE, IN CORROSION RESISTING STEEL |
| PREN 4694 : DRAFT 2015 | AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - ASSEMBLY CODE D, E AND F |
| PREN 3385 : 200P1 | AEROSPACE SERIES - RINGS RETAINING, EXTERNAL, AXIAL MOUNTING, STEEL, VACUUM CADMIUM PLATED |
| PREN 3411 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM ALLOY 2017A, METRIC SERIES |
| PREN 3423 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREE COUNTERSUNK NORMAL HEAD, IN TITANIUM TI-P02, ANODIZED, METRIC SERIES |
| PREN 3714 : 200P2 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, TWO LUG, WITH COUNTERBORE, IN HEAT RESISTING STEEL, SILVER PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 4253 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, CLOSED CORNER, REDUCED SERIES WITH COUNTERBORE, IN HEAT RESISTING STEEL, SILVER PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 4269 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, TWO LUG, REDUCED SERIES, WITH COUNTERBORE, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 4033 : 200P1 | AEROSPACE SERIES - BEARINGS, AIRFRAME ROLLING - RIGID SINGLE ROW BALL BEARINGS IN CORROSION RESISTING STEEL - DIAMETER SERIES 8 AND 9, REDUCED INTERNAL RADIAL CLEARANCE - DIMENSIONS AND LOADS |
| PREN 4038 : 200P1 | AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER REDUCED STARTING TORQUE - NORMAL NARROW SERIES - DIMENSIONS AND LOADS |
| PREN 6050 : 200P3 | AEROSPACE SERIES - PINS, CLOSE TOLERANCE, SWAGE LOCKING, 100 DEGREES COUNTERSUNK REDUCED HEAD, SHEAR TYPE, IN ALUMINIUM ALLOY 7050, CHEMICAL FILM - INCH SERIES |
| PREN 4306 : 200P1 | AEROSPACE SERIES - SLEEVES, TUBULAR, FOR TENSION SCREWS WITH FLUSH HEAD, IN CORROSION RESISTING STEEL, PASSIVATED, (0,50 MM WALL THICKNESS) |
| PREN 4323 : 200P1 | AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK HEAD, SIX LOBE RECESS, THREADED TO HEAD, IN TITANIUM ALLOY TI-P63, ANODIZED, MOS[2] COATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/350 DEGREES C |
| PREN 4363 : 200P2 | AEROSPACE SERIES - RIVETS, SOLID 100 DEGREES COUNTERSUNK REDUCED HEAD, IN TITANIUM ALLOY TI 44,5 CB, WITH ALUMINIUM PIGMENTED COATING, METRIC SERIES |
| PREN 4021 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - ELBOWS 90 DEGREE, BULKHEAD |
| PREN 4031 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - NUTS FOR WELDED UNION |
| PREN 4041 : 200P1 | AEROSPACE SERIES BEARINGS, AIRFRAME ROLLING RIGID SINGLE ROW BALL BEARINGS IN CORROSION RESISTING STEEL, WITH EXTENDED INNER RING AND FLANGED ALIGNMENT BUSH - DIMENSIONS AND LOADS |
| PREN 4078 : 200P1 | AEROSPACE SERIES - INSERTS, THREADED, THIN WALL, LOCKED AND SELF-LOCKING, IN HEAT RESISTING STEEL MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| PREN 6068 : 200P2 | AEROSPACE SERIES - PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, SINGLE ACTING, BUTTON HANDLE |
| PREN 4494 : 200P1 | AEROSPACE SERIES - RINGS, SPLIT, IN STEEL |
| PREN 4080 : 200P3 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| PREN 4118 : 200P1 | AEROSPACE SERIES - NUTS, BIHEXAGONAL, SELF-LOCKING, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED ON THREAD - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C |
| PREN 4127 : 200P2 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREE C |
| PREN 4493 : 200P1 | AEROSPACE SERIES - INSERTS, SCREW THREAD, HELICAL COIL, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH1801 (NI-P96HT, NIMONIC 90), SILVER PLATED |
| PREN 4162 : 200P2 | AEROSPACE SERIES - SCREWS 100 DEGREES COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 4186 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - CROSS UNIONS |
| PREN 3764 : 200P2 | AEROSPACE SERIES - WASHERS, CONCAVE, IN HEAT RESISTING STEEL, PASSIVATED |
| PREN 4830-003 : DRAFT 2014 | AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, MODULAR, OPERATING TEMPERATURE 125 DEGREES C, FOR EN 4639-10X CONTACTS - PART 003: MODULE - PRODUCT STANDARD |
| PREN 4165-008 : 200P1 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREE C CONTINUOUS - PART 008: RACK AND PANEL PLUG FOR 2 AND 4 MODULES, SERIES 2 - PRODUCT STANDARD |
| PREN 4563 : 200P1 | AEROSPACE SERIES - PIPE COUPLING, WELDED, IN HEAT RESISTING STEEL - TEES - INCH SERIES |
| I.S. EN 4652-001:2015 | AEROSPACE SERIES - CONNECTORS, COAXIAL, RADIO FREQUENCY - PART 001: TECHNICAL SPECIFICATION |
| I.S. EN 3904:2017 | AEROSPACE SERIES - WASHERS, WIRE LOCKING IN ALUMINIUM ALLOY, ANODIZED |
| I.S. EN 4693:2017 | AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - ASSEMBLY CODE A, B AND C |
| I.S. EN 4803:2017 | AEROSPACE SERIES - FLANGE COUPLINGS - SWIVEL FLANGE WITH 4 FASTENING HOLES, IN HEAT RESISTING STEEL - INCH SERIES |
| I.S. EN 6029:2017 | AEROSPACE SERIES - ROD-ENDS, ADJUSTABLE, SINGLE FORK WITH UNJ THREADED SHANK MIN. ENGAGEMENT: 1,5 X THREAD DIAMETER IN CORROSION RESISTING STEEL - DIMENSIONS AND LOADS - INCH SERIES |
| I.S. EN 4624:2010 | AEROSPACE SERIES - INSERTS, MJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH1302 (WASPALOY), SILVER PLATE |
| I.S. EN 4710-07:2015 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 07: RETAINING GROMMET |
| I.S. EN 4710-06:2015 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 06: STUD - QUICK-RELEASE AND LOCKING |
| I.S. EN 4710-05:2015 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 05: SPRING CLAMP - TWO WAYS TOLERANCE COMPENSATION |
| I.S. EN 4701-003:2013 | AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, MODULAR, OPERATING TEMPERATURE 125 DEGREES C, FOR EN 4531-101 CONTACTS - PART 003: MODULE SERIES 2 - PRODUCT STANDARD |
| BS EN 4710-03:2015 | Aerospace series. Quick release fastening systems for non-structural applications Spring clamp |
| I.S. EN 3908:2017 | AEROSPACE SERIES - NIPPLES, LUBRICATING, AXIAL TYPE, IN CORROSION RESISTING STEEL, PASSIVATED |
| I.S. EN 4635:2009 | AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK HEAD, SIX LOBES RECESS, SHORT THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718) - CLASSIFICATION: 1270 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| I.S. EN 3613:2009 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718), SILVER PLATED - CLASSIFICATION: 1275 MPA/650 DEGREE C |
| BS EN 2585:2001 | Aerospace series. Bearings, spherical plain in corrosion-resisting steel with self-lubricating liner. Elevated load at ambient temperature. Dimensions and loads |
| I.S. EN 3539:2010 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, ONE LUG, FIXED, WITH COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| I.S. EN 4132:2009 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| I.S. EN 4125:2010 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, TWO LUG, REDUCED SERIES, WITH INCREMENTAL COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| UNI EN 4199-003 : 2014 | AEROSPACE SERIES - BONDING STRAPS FOR AIRCRAFT - PART 003: BONDING STRAP ASSEMBLIES WITH FLAT BRAIDED CONDUCTOR COPPER, TIN PLATED -65 DEGREES C UP TO 150 DEGREES C AND COPPER, NICKEL PLATED -65 DEGREES C UP TO 260 DEGREES C - PRODUCT STANDARD |
| UNI EN 4531-005 : 2012 | AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY TRIPLE START THREADED RING - FLUSH CONTACTS - PART 005: PLUG - PRODUCT STANDARD |
| NF EN 4641-301 : 2011 | AEROSPACE SERIES - CABLES, OPTICAL 125 MM DIAMETER CLADDING - PART 301: TIGHT STRUCTURE 50/125 MM GI FIBRE NOMINAL 1,8 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| I.S. EN 4178:2017 | AEROSPACE SERIES - SCREWS, PAN HEAD, SIX LOBE RECESS, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN TITANIUM ALLOY, ANODIZED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| I.S. EN 6128:2017 | AEROSPACE SERIES - BLIND BOLT, 100 DEGREE FLUSH HEAD, HIGH STRENGTH |
| I.S. EN 4673-005:2010 | AEROSPACE SERIES - INSERTS, UNJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS - PART 005: IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY), SILVER PLATING |
| NF EN 3613 : 2010 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601(INCONEL 718) SILVER PLATED - CLASSIFICATION: 1275 MPA/650 DEGREES C |
| EN 4652-322:2017 | Aerospace series - Connectors, coaxial, radio frequency - Part 322: Type 3, N interface - Crimp version - Square flange receptacle - Product standard |
| NF EN 2862 : 2010 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, 90 DEGREES CORNER, WITH COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| BS EN 4652-322:2017 | Aerospace series. Connectors, coaxial, radio frequency Type 3, N interface. Crimp version. Square flange receptacle. Product standard |
| EN 2944:2018 | Aerospace series - Inserts, screw thread, helical coil, self-locking, in corrosion resisting steel FE-PA3004 |
| EN 4694:2017 | Aerospace series - Tie rod with integrated bolts - Assembly code D, E and F |
| BS EN 4652-420:2017 | Aerospace series. Connectors, coaxial, radio frequency Type 4, C interface. Crimp assembly version. Straight plug. Product standard |
| I.S. EN 3660-019:2009 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 019: CABLE OUTLET, STYLE A, 45 DEGREES, UNSEALED, WITH CABLE TIE STRAIN RELIEF - PRODUCT STANDARD |
| NF EN 3537 : 2010 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, TWO LUG, WITH COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| NF EN 4645-003 : 2010 | AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY THREADED RING, SELF-LOCKING 1,25 MM DIAMETER FERRULE WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 003: SQUARE FLANGE RECEPTACLE - PRODUCT STANDARD |
| NF EN 4137 : 2010 | AEROSPACE SERIES - BOLTS, NORMAL BIHEXAGONAL HEAD, STEPPED SHANK, LONG THREAD, IN TITANIUM ALLOY, ANODIZED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| NF EN 4075 : 2008 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN CORROSION RESISTING STEEL, PASSIVATED, METRIC - CLASSIFICATION: 490 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| NF EN 3226 : 2010 | AEROSPACE SERIES - NUTS, HEXAGON, PLAIN, NORMAL HEIGHT, NORMAL ACROSS FLATS, STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA/235 DEGREES C |
| NF EN 3614 : 2010 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL FE-PA2601(A286), SILVER PLATED - CLASSIFICATION 900 MPA/650 DEGREES C |
| NF EN 4640-003 : 2008 | AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, RACK AND PANEL, MULTICONTACT, 1,25 DIAMETER FERRULE, WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 003: PLUG OPTICAL CONNECTOR - PRODUCT STANDARD |
| BS EN 4123:2004 | Aerospace series. Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread. Classification : 1550 MPa (at ambient temperature) / 600°C |
| ISO 22438:2018 | Aerospace series Pipe coupling 830' in titanium alloy Thrust wires |
| I.S. EN 3636:2008 | AEROSPACE SERIES - SCREWS, REDUCED PAN HEAD, OFFSET CRUCIFORM RECESS, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL FEPA92HT (A286), SILVER PLATED - CLASSIFICATION: 900 MPA/650 DEGREE C |
| NF EN 4035 : 2006 | AEROSPACE SERIES - ROD ENDS, ADJUSTABLE WITH SELF-ALIGNING DOUBLE ROW BALL BEARING IN CORROSION RESISTING STEEL, REDUCED INTERNAL RADIAL CLEARANCE AND THREADED SHANK IN TITANIUM ALLOY - DIMENSIONS AND LOADS |
| I.S. EN 3740:1997 | AEROSPACE SERIES - BOLTS, SHOULDERED, THIN HEXAGONAL HEAD, CLOSE TOLERANCE SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED - CLASSIFICATION: 1,100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| I.S. EN 3645-001:2015 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, SCOOP-PROOF, TRIPLE START THREADED COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
| EN 2930:1996 | Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1 210 MPa (at ambient temperature)/730°C |
| DIN EN 2149:1996-05 | AEROSPACE SERIES - RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM ALLOY 5056A, ANODISED OR CHROMATED, INCH BASED SERIES |
| DIN EN 2884:1996-03 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS[2] LUBRICATED, CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| DIN EN 3644:1996-11 | AEROSPACE SERIES - RIVETS, SOLID, UNIVERSAL HEAD, IN TITANIUM TI-PO2, ANODIZED - INCH BASED SERIES |
| DIN EN 2870:1996-09 | AEROSPACE SERIES - BOLTS, NORMAL BIHEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS(INDEX)2 LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| DIN EN 3377:1996-05 | AEROSPACE SERIES - NUTS, HEXAGONAL, SELF-LOCKING, IN HEAT RESISTING STEEL FE-PA92HT (A286) - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| DIN EN 3760:1996-11 | AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN HEAT AND CORROSION RESISTING STEEL, PASSIVATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| DIN EN 2885:1996-03 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED, CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| DIN EN 6024:1996-03 (Draft) | lubricated - Classification: 1100 MPa (at ambient temperature)/315 C; inch series |
| DIN EN 3642:1996-11 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREES COUNTERSUNK NORMAL HEAD, WITH DOME, IN TITANIUM TI-PO2, ANODIZED - INCH BASED SERIES |
| DIN EN 3237:1998-02 | AEROSPACE SERIES - INSERTS, THIN WALL, SELF-LOCKING, LONG, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100 HT (INCONEL 718) - SILVER PLATED INTERNAL THREAD |
| DIN EN 3379:1996-05 | AEROSPACE SERIES - BOLTS, DOUBLE HEXAGON HEAD, CLOSE TOLERANCE SHANK, MEDIUM LENGTH THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY), FOR INCREASED HEIGHT NUTS - CLASSIFICATION: 1210 MPA (AT AMBIENT TEMPERATURE)/730 DEGREES C |
| DIN EN 3381:1996-11 | AEROSPACE SERIES - SCREWS, 100 DEGREE COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM, ANODIZED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| BS EN 2336:2005 | Aerospace series. Bearings, spherical plain in steel with assembly slots. Dimensions and loads |
| BS EN 3010:1998 | Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy). Classification: 1210 MPa (at ambient temperature)/730°C |
| BS EN 2138:2000 | Washers, flat, in steel, cadmium plated |
| BS EN 4117:2004 | Aerospace series. Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread. Classification: 1550 MPa (at ambient temperature) / 600°C |
| BS EN 3912:2007 | Aerospace series. Bolts, pan head, six lobe recess, relieved shank, long thread, in heat resisting steel FE-PA2601 (FE-PA92HT, A286), silver plated. Classification: 1100 MPa (at ambient temperature) / 650°C |
| BS EN 4358:2006 | Aerospace series. Six lobe recess. Drivers, double ended, 90 |
| BS EN 2888:2006 | Aerospace series. Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated. Classification: 600 MPa (at ambient temperature) / 425°C |
| BS EN 2913:2000 | Washers, flat, large diameter, in steel, cadmium plated |
| BS EN 4311:2006 | Aerospace series. Studs, coarse tolerance reduced shank, medium length threads, in heat and corrosion resisting steel, MoS<sub>2</sub> lubricated. Classification: 1100 MPa (at ambient temperature) / 315°C |
| BS EN 4166:2004 | Aerospace series. Clips, spring tension, three parts. PTFE bushes |
| BS EN 2552:1993 | Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2117, anodized or chromated, inch based series |
| BS EN 3852:2002 | Aerospace series. Pipe couplings, 60°, spherical, in titanium alloy TI-P64001. Straight unions, welded, threaded |
| BS EN 2911:1995 | Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A 286), silver plated. Classification: 1100 MPa (at ambient temperature)/650°C |
| BS EN 3015:2015 | Aerospace series. Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286), silver plated. Classification: 1 100 MPa (at ambient temperature) / 650 °C |
| BS EN 4494:2006 | Aerospace series. Rings, split, in stainless steel |
| BS EN 4233:2001 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Unions, welded, threaded |
| BS EN 6105:2016 | Aerospace series. Stud with shoulder |
| BS EN 4027:2001 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Tees branch with thrust wire nut |
| BS EN 4165-007:2007 | Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous Plug for 2 and 4 modules, series 3. Product standard |
| BS EN 3324:2007 | Aerospace series. Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PM1708 (FV535). Classification: 1000 MPa/550°C. Unplated |
| BS EN 3014:2015 | Aerospace series. Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286). Classification: 1 100 MPa (at ambient temperature) / 650 °C |
| BS EN 3858:2002 | Aerospace series. Pipe couplings, 60°, spherical, in titanium alloy TI-P64001. Thrust wires in steel FE-PA 13 |
| BS EN 4359:2006 | Aerospace series. Six lobe recess. Drivers. Technical Specification |
| BS EN 3303:1997 | Screws, cap head, hexagon socket, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature)/235°C |
| BS EN 3444:2006 | Aerospace series. Bolt, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated. Classification: 1250 MPa (at ambient temperature) / 650°C |
| BS EN 4352:2004 | Aerospace series. Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS<sub>2</sub> coated. Classification. 1 550 MPa (at ambient temperature) / 425°C |
| BS EN 4173:2006 | Aerospace series. Lockbolts, 100 countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series. Classification: 1100 MPa (at ambient temperature) / 315°C |
| BS EN 4639-005:2007 | Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder Removable alignment sleeve holder. Product standard |
| BS EN 4013:2004 | Aerospace series. Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated. Classification: 1550 MPa (at ambient temperature) / 600°C |
| BS EN 4189:2001 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Tees, bulkhead branch long |
| BS EN 4191:2001 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Tees, reduced, bulkhead branch, long |
| BS EN 3007:1996 | Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated. Classification: 900 MPa (at ambient temperature)/650°C |
| BS EN 2649:1995 | Screws, pan head, slotted, threaded to head, in alloy steel, cadmium plated. Classification. 900 MPa (at ambient temperature)/235°C |
| BS EN 3689:2001 | Aerospace series. T-ring fillers in titanium alloy for welding pipes. 28000 kPa nominal pressure |
| BS EN 2889:2006 | Aerospace series. Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification: 900 MPa (at ambient temperature) / 235°C |
| BS EN 3061:2007 | Aerospace series. Bearings, airframe rolling. Rigid single row ball bearings in corrosion resisting steel, with flanged alignment housing. Dimensions and loads |
| BS EN 2906:1994 | Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286). Classification: 1100 MPa (at ambient temperature)/650°C |
| BS EN 4165-020:2007 | Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous Coupling system keyway for receptacle. Product standard |
| BS EN 2754:2006 | Aerospace series. Nuts, anchor, self locking, two lug, floating with counterbore. Classification: 1100 MPa/235°C |
| BS EN 3267:2001 | Aerospace series. Washers, bulkhead in titanium alloy |
| BS EN 4187:2001 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Elbows 90°, bulkhead, long |
| BS EN 3139:2001 | Aerospace series. Rivets, solid, 100° countersunk normal head, in corrosion resisting steel FE-PA11, passivated, inch based series |
| BS EN 3545-008:2006 | Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55°C to 175°C Tools for assembly/removal of coding and attachment systems. Product standard |
| BS EN 2335:2005 | Aerospace series. Bearings, spherical plain in corrosion resisting steel without assembly slot. Dimensions and loads |
| BS EN 2555:1993 | Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 5056A, inch based series |
| BS EN 4420:2003 | Aerospace series. Clips, spring tension, in alloy steel FE-PA3903 |
| BS EN 4113:2009 | Aerospace series. Clamps, loop (\'P\' type) in corrosion resisting steel, passivated, with rubber cushioning. Dimensions, masses |
| BS EN 4193:2001 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Tees, reduced bulkhead on run long |
| BS EN 4165-006:2007 | Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous Plug for 2 and 4 modules, series 2. Product standard |
| BS EN 4109:2006 | Aerospace series. Wrenches, face spanner |
| I.S. EN 4009:2005 | AEROSPACE SERIES - BOLTS, DOUBLE HEXAGON HEAD, CLOSE TOLERANCE SHANK, MEDIUM LENGTH THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718) - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C |
| I.S. EN 4036:2006 | AEROSPACE SERIES - ROD ENDS, ADJUSTABLE WITH SELF-ALIGNING DOUBLE ROW BALL BEARING AND THREADED SHANK IN CORROSION RESISTING STEEL, REDUCED INTERNAL RADIAL CLEARANCE - DIMENSIONS AND LOADS |
| I.S. EN 4035:2006 | AEROSPACE SERIES - ROD ENDS, ADJUSTABLE WITH SELF-ALIGNING DOUBLE ROW BALL BEARING IN CORROSION RESISTING STEEL, REDUCED INTERNAL RADIAL CLEARANCE AND THREADED SHANK IN TITANIUM ALLOY - DIMENSIONS AND LOADS |
| I.S. EN 2885:1996 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| ONORM EN 3637 : APR 2009 | AEROSPACE SERIES - NUTS, SELF-LOCKING, BI-HEXAGONAL (DOUBLE REDUCED), IN HEAT RESISTING NICKEL BASE ALLOY - NI-P101HT (WASPALOY), SILVER PLATED - CLASSIFICATION: 1210 MPA/730 DEGREES C |
| I.S. EN 2886:1998 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| NF EN 2885 : 1996 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| NF EN 2886 : 1996 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| BS EN 4128:2016 | Aerospace series. Bolts, normal hexagonal head, coarse tolerance shank, short thread, in heat resisting nickel base alloy, aluminium IVD coated. Classification: 1 250 MPa (at ambient temperature) / 425 °C |
| NF EN 4135 : 2010 | AEROSPACE SERIES - BOLTS, NORMAL BI-HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN TITANIUM ALLOY, ANODIZED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| BS EN 4443:2012 | Aerospace series. Nuts, elliptical clinch, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286), MoS2 coated, Classification: 900 MPa (at ambient temperature)/425°C |
| 06/30150695 DC : 0 | BS EN 4022 - AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30 MINUTES IN TITANIUM ALLOY - ELBOWS 45 DEGREE, SWIVEL NUT, WELDED |
| BS EN 4652-421:2017 | Aerospace series. Connectors, coaxial, radio frequency Type 4, C interface. Crimp assembly version. Right angle plug. Product standard |
| UNI EN 3386 : 2012 | AEROSPACE SERIES - RINGS RETAINING, RADIAL MOUNTING, STEEL, PHOSPHATED |
| 12/30272544 DC : DRAFT SEP 2012 | BS EN 4122 - AEROSPACE SERIES - SHANK NUTS, SELF-LOCKING, IN HEAT RESISTING STEEL FE-PA2601 (A286), SILVER PLATED ON THREAD - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| BS EN 6138:2017 | Aerospace series. Cap, protective, non-metallic for fitting ends ≤ 3 000 PSI hydraulic systems |
| BS EN 4265:2013 | Aerospace series. Bearing spherical plain, metal to metal in corrosion resisting steel. Wide series. Dimensions and loads. Inch series |
| 07/30167565 DC : 0 | BS EN 4645-002 - AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY THREADED RING, 1,25 MM DIA. FERRULE WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 002: SPECIFICATION OF PERFORMANCE AND CONTACT ARRANGEMENTS |
| BS EN 4137:2009 | Aerospace series. Bolts, normal bi-hexagonal head, stepped shank, long thread, in titanium alloy, anodized, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315°C |
| 12/30272550 DC : DRAFT SEP 2012 | BS EN 4123 - AEROSPACE SERIES - SHANK NUTS, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), SILVER PLATED ON THREAD - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/600 DEGREES C |
| I.S. EN 4702-03:2017 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 03: STUD - QUICK-RELEASE AND LOCKING |
| 06/30145493 DC : 0 | |
| DIN EN 3751:1997-03 (Draft) | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, CLOSED CORNER, REDUCED SERIES, WITH COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| 06/30151546 DC : 0 | BS EN 4613 - AEROSPACE SERIES - SPHERICAL PLAIN BEARINGS IN CORROSION RESISTING STEEL WITH SELF LUBRICATING LINER, NARROW SERIES - DIMENSIONS AND LOADS. INCH SERIES |
| I.S. EN 4137:2009 | AEROSPACE SERIES - BOLTS, NORMAL BI-HEXAGONAL HEAD, STEPPED SHANK, LONG THREAD, IN TITANIUM ALLOY, ANODIZED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| 16/30340215 DC : 0 | BS EN 3264 - AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTE IN TITANIUM ALLOY - THRUST WIRE NUTS |
| I.S. EN 4297:2017 | AEROSPACE SERIES - NUTS, HEXAGON, SELF-LOCKING BY PLASTIC RING, NORMAL HEIGHT, NORMAL ACROSS FLATS, IN CORROSION RESISTING STEEL, PASSIVATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/120 DEGREE C |
| I.S. EN 4652-421:2017 | AEROSPACE SERIES - CONNECTORS, COAXIAL, RADIO FREQUENCY - PART 421: TYPE 4, C INTERFACE - CRIMP ASSEMBLY VERSION - RIGHT ANGLE PLUG - PRODUCT STANDARD |
| BS EN 3373-008:2012 | Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors Copper lugs nickel plated ring shaped for copper conductors nickel plated for inch series studs up to 340 °C. Product standard |
| UNI EN 4624 : 2011 | AEROSPACE SERIES - INSERTS, MJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH1302 (WASPALOY), SILVER PLATE |
| UNI EN 3753 : 2011 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, 60 DEGREES CORNER, WITH COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| 10/30227763 DC : 0 | BS EN 6114 - AEROSPACE SERIES - BOLT, COUNTERSUNK HEAD, SHORT THREAD - INCH SERIES |
| 16/30342252 DC : 0 | BS EN 8.3556 - AEROSPACE SERIES - SCREWS, PAN HEAD, SPIRAL DRIVE RECESS, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN TITANIUM ALLOY, ANODIZED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| NF EN 4126 : 2010 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, TWO LUG, REDUCED SERIES, WITH INCREMENTAL COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| I.S. EN 4072:2016 | AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE SHANK, SHORT THREAD IN TITANIUM ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| BS EN 4309:2016 | Aerospace series. Nuts, hexagon, self-locking by plastic ring, normal height, normal across flats, in alloy steel, cadmium plated. Classification: 900 MPa (at ambient temperature) / 120 °C |
| BS EN 3538:2010 | Aerospace series. Nuts, anchor, self-locking, fixed, two lug, reduced series, with counterbore, in heat resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315°C |
| UNI EN 4673-005 : 2011 | AEROSPACE SERIES - INSERTS, UNJ THREADS, SELF-LOCKING, WITH SELF- BROACHING KEYS - PART 005: IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY), SILVER PLATING |
| UNI EN 4701-003 : 2013 | SERIE AEROSPAZIALE - CONNETTORI OTTICI, RETTANGOLARI, MODULARI, TEMPERATURA DI FUNZIONAMENTO 125 DEGREES C, PER CONTATTI EN 4531-101 - PARTE 003: MODULI SERIE 2 - NORMA DI PRODOTTO |
| DIN EN 4080:1996-03 (Draft) | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| UNI EN 4539-003 : 2011 | AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER ELEVATED LOAD UNDER LOW OSCILLATIONS - WIDE SERIES - DIMENSIONS AND LOADS - PART 003: INCH SERIES WITH LOW FRICTION COEFFICIENT |
| 13/30286708 DC : 0 | BS EN 4830-003 - AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, MODULAR, OPERATING TEMPERATURE 125 DEGREES C, FOR EN 4639-10X CONTACT - PART 003: MODULE - PRODUCT STANDARD |
| 16/30353142 DC : 0 | BS EN 3645-001 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, SCOOP-PROOF, TRIPLE START THREADED COUPLING, OPERATING TEMPERATURE 175 DEGRES C OR 200 DEGRES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
| BS EN 4134:2009 | Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in heat resisting nickel base alloy, aluminium IVD coated. Classification: 1250 MPa (at ambient temperature)/425°C |
| 11/30242282 DC : 0 | BS EN 4695 - AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - ASSEMBLY CODE G, H AND K |
| I.S. EN 6129:2016 | AEROSPACE SERIES - BLIND BOLT, PROTRUDING HEAD, HIGH STRENGTH, PULLTYPE |
| 16/30342246 DC : 0 | BS EN 8.3555 - AEROSPACE SERIES - SCREWS, PAN HEAD, SPIRAL DRIVE RECESS, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| BS EN 4199-005:2009 | Aerospace series. Bonding straps for aircraft Flat braid conductors copper, tin plated -65°C up to 150°C and copper, nickel plated, -65°C up to 260°C. Product standard |
| BS EN 3843:2010 | Aerospace series. Nuts, bihexagonal, self-locking, with counterbore, in heat resisting steel, passivated. Classification: 1100 MPa (at ambient temperature)/650°C |
| I.S. EN 3383:2012 | AEROSPACE SERIES - RINGS RETAINING, INTERNAL, AXIAL MOUNTING, STEEL, VACUUM CADMIUM PLATED |
| BS EN 2867:2009 | Aerospace series. Nuts, anchor, self-locking, floating, one lug, with counterbore, in heat resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature) / 315 °C |
| 16/30342243 DC : 0 | BS EN 8.3554 - AEROSPACE SERIES - SCREWS, PAN HEAD, SPIRAL DRIVE RECESS, THREADED TO HEAD, IN HEAT AND CORROSION RESISTING STEEL, PASSIVATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| 98/714592 DC : DRAFT SEP 1998 | PREN 4303 - AEROSPACE SERIES - SLEEVES, TUBULAR, FOR TENSION SCREWS AND BOLTS WITH FLUSH HEAD, IN CORROSION RESISTING STEEL, PASSIVATED (0,25 MM WALL THICKNESS) |
| BS EN 4165-027:2015 | Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous Rack and panel rear mounted plug for 2 and 4 modules, series 3. Product standard |
| 11/30242278 DC : 0 | BS EN 4693 - AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - ASSEMBLY CODE A, B AND C |
| I.S. EN 3373-007:2012 | AEROSPACE SERIES - TERMINAL LUGS AND IN-LINE SPLICES FOR CRIMPING ON ELECTRIC CONDUCTORS - PART 007: NICKEL PLATED ALUMINIUM TERMINAL LUGS FOR CRIMPING ON NICKEL PLATED ALUMINIUM CABLE FOR INCH SERIES STUDS - PRODUCT STANDARD |
| 14/30314132 DC : 0 | BS EN 3672 - AEROSPACE SERIES - SHANK NUTS, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY), SILVER PLATED, FOR 30 DEGREE SWAGE - CLASSIFICATION: 1210 MPA (AT AMBIENT TEMPERATURE)/730 DEGREE C |
| 14/30297283 DC : 0 | BS EN 4652-320 - AEROSPACE SERIES - CONNECTORS, COAXIAL, RADIO FREQUENCY - PART 320: TYPE 3, N INTERFACE - CRIMP VERSION - STRAIGHT PLUG - PRODUCT STANDARD |
| BS EN 4163:2016 | Aerospace series. Screws 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. Classification: 1 100 MPa (at ambient temperature) / 235 °C |
| BS EN 4165-005:2007 | Aerospace series. Connectors, electrical, rectangular, Modular. Operating temperatures 175 °C continuous Stackable receptacle 2 and 4 modules, series 3. Product standard |
| 13/30292609 DC : 0 | BS EN 4165-025 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 025: MODULE RECEPTACLE - PRODUCT NORM |
| 96/702226 DC : 0 | PREN 4229 - AEROSPACE SERIES - PIPE COUPLINGS 60 DEGREES; IN ANODIZED ALUMINIUM ALLOY; UNIONS, STRAIGHT BRAZING |
| I.S. EN 4134:2009 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1250 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| 16/30342254 DC : 0 | BS EN 8.3558 - AEROSPACE SERIES- SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, SPIRAL DRIVE RECESS, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| BS EN 4830-003:2015 | Aerospace series. Connectors, optical, rectangular, modular, operating temperature 125 °C, for EN 4639-10X contacts Module. Product standard |
| BS EN 3539:2010 | Aerospace series. Nuts, anchor, self-locking, one lug, fixed, with counterbore, in heat resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315°C |
| UNI EN 4641-104 : 2012 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 104: SEMI-LOOSE, RUGGEDIZED DUPLEX CONSTRUCTION 62,5/125 [MU]M GI FIBRE NOMINAL, 4,95 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| 14/30300811 DC : 0 | BS EN 3542 - AEROSPACE SERIES - INSERTS, SCREW THREAD, HELICAL COIL, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2801 (INCONEL X750) |
| XP PREN 3725 : 1997 XP | AEROSPACE SERIES - BOLTS, PAN HEAD, SIX LOBE RECESS, NORMAL SHANK, LONG THREAD, IN TITANIUM ALLOY TI-P63, MOS2 COATED - STRENGTH CLASS: 1100 MPA (AT AMBIENT TEMPERATURE) |
| BS EN 4710-05:2015 | Aerospace series. Quick release fastening systems for non-structural applications Spring clamp. Two ways tolerance compensation |
| BS EN 4396:2008 | Aerospace series. Shaft-nuts, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated |
| 11/30242281 DC : 0 | BS EN 4694 - AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - ASSEMBLY CODE D, E AND F |
| I.S. EN 4538-003:2010 | AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER ELEVATED LOAD UNDER LOW OSCILLATIONS - NARROW SERIES - DIMENSIONS AND LOADS - PART 003: INCH SERIES WITH LOW FRICTION COEFFICIENT |
| XP PREN 3832 : 1995 XP | AEROSPACE SERIES - BOLTS, DOUBLE HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718) - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| UNI EN 3706 : 2012 | AEROSPACE SERIES - HEADLESS THREADED PLUGS, CROSS RECESS, IN ALUMINIUM ALLOY 5086 |
| BS EN 4802:2017 | Aerospace series. Flange couplings. Swivel flange with 3 fastening holes, in nickel alloy. Inch series |
| 09/30210068 DC : DRAFT SEP 2009 | BS EN 4531-005 - AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY THREADED RING - FLUSH CONTACTS - PART 005: PLUG - PRODUCT STANDARD |
| NF EN 3729 : 2008 | AEROSPACE SERIES - RINGS, THREADED, SELF-LOCKING, LEFT-HAND THREAD, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED |
| 09/30208358 DC : 0 | BS EN 4813 - AEROSPACE SERIES - FLANGE COUPLINGS - CAP, IN HEAT RESISTING STEEL, INCH SERIES |
| UNI EN 4622 : 2011 | AEROSPACE SERIES - INSERTS, MJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS, IN HEAT RESISTING STEEL FE-PA2601 (A286), MOS[2] COATED |
| NF EN 3229 : 2010 | AEROSPACE SERIES - NUTS, HEXAGONAL, PLAIN, REDUCED HEIGHT, NORMAL ACROSS FLATS, IN STEEL, CADMIUM PLATED, LEFT HAND THREAD - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| EN 4702-05:2017 | Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 05: Retaining washer |
| BS EN 4535-2:2009 | Aerospace series. Bushes, flanged in aluminium alloy with self-lubricating liner, elevated load Dimensions and loads. Inch series |
| NF EN 4127 : 2010 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| UNI EN 3382 : 2012 | AEROSPACE SERIES - RINGS RETAINING, INTERNAL, AXIAL MOUNTING, STEEL, PHOSPHATED |
| 09/30199080 DC : DRAFT JAN 2009 | BS EN 4023 - AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30 MINUTES IN TITANIUM ALLOY - ELBOWS 45 DEGREE |
| NF EN 4635 : 2010 | AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK HEAD, SIX LOBES RECESS, SHORT THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718) - CLASSIFICATION: 1270 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| XP PREN 4116 : 1994 XP | AEROSPACE SERIES - NUTS, HEXAGONAL, SELF-LOCKING, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED ON THREAD - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREE C |
| NF EN 2867 : 2010 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, ONE LUG, WITH COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| NF EN 4641-103 : 2011 | AEROSPACE SERIES - CABLES, OPTICAL 125 MM DIAMETER CLADDING - PART 103: SEMI-LOOSE, RUGGEDIZED SIMPLEX CONSTRUCTION 62,5/125 MM GI FIBRE NOMINAL 2,74 MM, OUTSIDE DIAMETER - PRODUCT STANDARD |
| 06/30150692 DC : 0 | BS EN 4020 - AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30 MINUTES IN TITANIUM ALLOY - ELBOWS 90 DEGREE, SWIVEL NUT, WELDED |
| BS EN 3386:2012 | Aerospace series. Rings retaining, radial mounting, steel, phosphated |
| BS EN 3712:2007 | Aerospace series. Nuts, anchor, self-locking, one lug, fixed, reduced series, with counterbore, in steel, cadmium plated, MoS2, lubricated. Classification: 1100 MPa (at ambient temperature)/235 °C |
| 96/702211 DC : 0 | PREN 4142 - AEROSPACE SERIES - PIPE COUPLINGS 60 DEGREES; IN ANODIZED ALUMINIUM ALLOY; UNIONS, TWO WAY |
| 13/30280017 DC : 0 | BS EN 4056-001 - AEROSPACE SERIES - CABLE TIES FOR HARNESSES - PART 001: TECHNICAL SPECIFICATION |
| UNI EN 4623 : 2011 | AEROSPACE SERIES - INSERTS, MJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718), SILVER PLATED |
| I.S. EN 4165-026:2015 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 026: ACCESSORIES FOR SINGLE MODULES - PRODUCT STANDARD |
| 01/709646 DC : DRAFT JUN 2001 | PREN 4165-013 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 013: CABLE CLAMP 2 OR 4 MODULES, FOR CONNECTORS SERIES 2 AND SERIES 3 - PRODUCT STANDARD |
| XP PREN 2927 : 1993 XP | AEROSPACE SERIES - BOLTS WITH DOUBLE HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718) - CLASSIFICATION: 1 275 MPA/650 DEGREE C |
| XP PREN 2935 : 1993 XP | AEROSPACE SERIES - BOLTS T-HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY) UNPLATED - CLASSIFICATION: 1210 MPA/730 DEGREE C |
| NF EN 4645-005 : 2010 | AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY THREADED RING, SELF-LOCKING 1,25 MM DIAMETER FERRULE WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 005: PLUG - PRODUCT STANDARD |
| PREN 2883 : 200P1 | AEROSPACE SERIES - NUTS, HEXAGONAL, SELF-LOCKING, WITH COUNTERBORE AND CAPTIVE WASHER, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| 96/702214 DC : 0 | PREN 4145 - AEROSPACE SERIES - PIPE COUPLINGS 60 DEGREES; IN ANODIZED ALUMINIUM ALLOY; NUTS, SWIVEL |
| BS EN 3728:2008 | Aerospace series. Shaft-nuts, self-locking, left-hand thread, in heat resisting steel FE-PA92HT (A286), silver plated |
| I.S. EN 4071:2009 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| BS EN 4640-004:2008 | Aerospace series. Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder Receptacle optical connector. Product standard |
| PREN 3303 : 1995 | BOLTS, CAP HEAD, HEXAGON SOCKET, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPa (AT AMBIENT TEMPERATURE)/235 DEG C |
| BS EN 3384:2012 | Aerospace series. Rings retaining, external, axial mounting,steel, phosphated |
| PREN 3081 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30 MINUTES IN TITANIUM ALLOY - FERRULES, WELDED WITH DYNAMIC BEAM SEAL END FOR REPAIR |
| PREN 4248 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, SINGLE LUG, WITH COUNTERBORE, IN HEAT RESISTING STEEL, SILVER PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 4641-201 : DRAFT 2017 | AEROSPACE SERIES - CABLES, OPTICAL, 125 [MU]M DIAMETER CLADDING - PART 201: SEMI-LOOSE STRUCTURE 9/125 [MU]M SM FIBER NOMINAL 1,8 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| PREN 4358 : 200P1 | AEROSPACE SERIES - SIX LOBE RECESS - DRIVERS, DOUBLE ENDED, 90 DEGREES |
| PREN 6100 : 200P2 | AEROSPACE SERIES - PINS, CLOSE TOLERANCE, SWAGE LOCKING, 100 DEGREES COUNTERSUNK HEAD, SHEAR TYPE, IN ALUMINIUM ALLOY 7050, CHEMICAL FILM - INCH SERIES |
| PREN 4554 : 200P1 | AEROSPACE SERIES - PIPE COUPLING, 37 DEGREES, SPHERICAL, IN HEAT RESISTING STEEL - STRAIGHT UNIONS, THREADED - INCH SERIES |
| PREN 4447 : 200P1 | AEROSPACE SERIES - NUTS, ELLIPTICAL CLINCH, SELF-LOCKING, UNJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286), MOS[2] COATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 6089 : 200P2 | AEROSPACE SERIES - WASHER, RETAINING, FOR USAGE WITH STUD EN 6088 |
| PREN 4555 : 200P1 | AEROSPACE SERIES - PIPE COUPLING, 37 DEGREES, IN HEAT RESISTING STEEL - FERRULES, WELDED - INCH SERIES |
| NF EN 3660-019 : 2009 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 019: CABLE OUTLET, STYLE A, 45 DEGREES, UNSEALED, WITH CABLE TIE STRAIN RELIEF - PRODUCT STANDARD |
| PREN 4614 : 200P1 | AEROSPACE SERIES - SPHERICAL PLAIN BEARINGS IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, WIDE SERIES - DIMENSIONS AND LOADS - INCH SERIES |
| NF EN 2852 : 2010 | AEROSPACE SERIES - NUTS, HEXAGONAL, PLAIN, NORMAL HEIGHT, NORMAL ACROSS FLATS, HEAT RESISTING STEEL PASSIVATED - CLASSIFICATION: 1100 MPA/650 DEGREES C |
| XP PREN 4302 : 1998 XP | AEROSPACE SERIES - OPEN RING INSERT TOOL, SQUARE DRIVE |
| XP PREN 3851 : 1995 XP | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY TI-P64001 - SWIVEL NUTS, STRAIGHT |
| PREN 6096 : DRAFT 2018 | AEROSPACE SERIES - BEARING, SPHERICAL PLAIN WITH SELF-LUBRICATING LINER, EXTRA WIDE INNER RING IN CORROSION RESISTING STEEL - DIMENSIONS AND LOADS - INCH SERIES |
| PREN 3660-017 : 200P1 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 017: CABLE OUTLET, STYLE A, STRAIGHT, UNSEALED, WITH CABLE TIE STRAIN RELIEF - PRODUCT STANDARD |
| XP PREN 2944 : 1992 XP | AEROSPACE SERIES - INSERT, SCREW THREAD, HELICAL COIL, SELF-LOCKING, IN CORROSION RESISTING ALLOY (Z10CN18-09 - EN 2947), UNPLATED |
| PREN 3245 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - UNIONS, REDUCER |
| PREN 3227 : 200P1 | AEROSPACE SERIES - NUTS, HEXAGON, PLAIN, NORMAL HEIGHT, NORMAL ACROSS FLATS, IN STEEL, CADMIUM PLATED, LEFT HAND THREAD - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 3328 : 200P1 | AEROSPACE SERIES - BOLTS, DOUBLE HEXAGON HEAD, CLOSE TOLERANCE MEDIUM THREAD LENGTH, IN HEAT RESISTING STEEL FE-PM38 (FV535), UNCOATED - CLASSIFICATION: 1000 MPA/550 DEGREES C |
| PREN 2880 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FUEL RESISTANT, SEALING, FLOATING, TWO LUG, WITH COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/120 DEGREES C |
| PREN 3264 : 200P3 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - THRUST WIRE NUTS |
| PREN 2550 : 2 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREES COUNTERSUNK NORMAL HEAD, IN ALUMINIUM 1050A, INCH BASED SERIES |
| PREN 3080 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30 MINUTES IN TITANIUM ALLOY - TEES, REDUCED BRANCH WITH THRUST WIRE NUT |
| PREN 3033 : 200P1 | AEROSPACE SERIES - NUTS, SELF-LOCKING, HEXAGONAL WITH CAPTIVE WASHER, IN HEAT RESISTING STEEL FE-PA92HT (A286), UNCOATED - CLASSIFICATION: 1100 MPA/425 DEGREES C |
| PREN 4165-013 : 200P2 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 013: CABLE CLAMP 2 AND 4 MODULES FOR CONNECTORS, SERIES 2 AND SERIES 3 - PRODUCT STANDARD |
| PREN 4165-020 : 200P1 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREE C CONTINUOUS - PART 020: COUPLING SYSTEM KEYWAY FOR RECEPTACLE - PRODUCT STANDARD |
| PREN 3034 : 200P1 | AEROSPACE SERIES - NUTS, SELF-LOCKING, HEXAGONAL WITH CAPTIVE WASHER, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER COATED - CLASSIFICATION: 1100 MPA/425 DEGREES C |
| XP PREN 4167 : 1995 XP | AEROSPACE SERIES - CLIPS, SPRING TENSION, THREE PARTS - INNER CLIPS IN HEAT RESISTING STEEL FE-PA92HT (A286) |
| PREN 3139 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREES COUNTERSUNK NORMAL HEAD, IN CORROSION RESISTING STEEL FE-PA11, PASSIVATED, INCH BASED SERIES |
| PREN 2553 : 2 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREES COUNTERSUNK NORMAL HEAD, WITH DOME, IN ALUMINIUM ALLOY 2017A, INCH BASED SERIES |
| PREN 3278 : 200P1 | AEROSPACE SERIES - SLEEVES, TUBULAR, PROTRUDING HEAD, IN CORROSION RESISTING STEEL, PASSIVATED (O,25 MM WALL THICKNESS) |
| PREN 3294 : 200P1 | AEROSPACE SERIES - BOLTS, T-HEAD, CLOSE TOLERANCE IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY), UNCOATED FOR INCREASED HEIGHT NUTS - CLASSIFICATION: 1210 MPA/730 DEGREES C |
| PREN 3369 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM ALLOY 7050, ANODIZED OR CHROMATED, INCH BASED SERIES |
| PREN 3301 : 200P1 | AEROSPACE SERIES - BOLTS, T-HEAD, CLOSE TOLERANCE MEDIUM THREAD LENGTH IN HEAT RESISTING STEEL FE-PM38 (FV535), UNCOATED - CLASSIFICATION: 1000 MPA/550 DEGREES C |
| PREN 3660-018 : 200P1 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 018: CABLE OUTLET, STYLE A, 90 DEGREE, UNSEALED, WITH CABLE TIE STRAIN RELIEF - PRODUCT STANDARD |
| PREN 3398 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM ALLOY 7050, ANODIZED OR CHROMATED, METRIC SERIES |
| PREN 3404 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM ALLOY 5056A, ANODIZED OR CHROMATED, METRIC SERIES |
| PREN 4536-2 : 200P1 | AEROSPACE SERIES - BUSHES, PLAIN IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, ELEVATED LOAD - PART 2: DIMENSIONS AND LOADS - INCH SERIES |
| PREN 3754 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, 60 DEGREES CORNER, WITH COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 3409 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM 1050A, METRIC SERIES |
| PREN 3419 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREE NORMAL COUNTERSUNK HEAD, IN NICKEL BASE ALLOY NI-P11, METRIC SERIES |
| PREN 4641-102 : 200P1 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 102: SEMI-LOOSE 62,5/125 [MU]M GI FIBRE NOMINAL 1,8 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| PREN 3323 : 200P1 | AEROSPACE SERIES - BOLTS WITH DOUBLE HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL FE-PM38 (FV535) - CLASSIFICATION: 1000 MPA/550 DEGREES C |
| PREN 4199-005 : 200P1 | AEROSPACE SERIES - BONDING STRAPS FOR AIRCRAFT - PART 005: FLAT BRAID CONDUCTORS COPPER, TIN PLATED -65 DEGREES C UP TO 150 DEGREES C AND COPPER, NICKEL PLATED, -65 DEGREES C UP TO 260 DEGREES C - PRODUCT STANDARD |
| PREN 3725 : 200P1 | AEROSPACE SERIES - BOLTS, PAN HEAD, SIX LOBE RECESS, NORMAL SHANK, LONG THREAD, IN TITANIUM ALLOY TI-P63, MOS[2] COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE) |
| PREN 3744 : 200P1 | AEROSPACE SERIES - STRAIGHT PINS, SPRING TYPE, LIGHT DUTY, IN CORROSION RESISTING SPRING STEEL, PASSIVATED |
| PREN 3742 : 200P2 | AEROSPACE SERIES - NUTS, HEXAGONAL, SLOTTED/CASTELLATED, REDUCED HEIGHT, REDUCED ACROSS FLATS, IN HEAT RESISTING STEEL, PASSIVATED - CLASSIFICATION: 600 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| PREN 3382 : 200P1 | AEROSPACE SERIES - RINGS RETAINING, INTERNAL, AXIAL MOUNTING, STEEL, PHOSPHATED |
| I.S. EN 4809:2017 | AEROSPACE SERIES - FLANGE COUPLINGS - GASKET SEAL WITH FLUOROCARBON SEAL ON ALUMINIUM PLATE WITH 3 FASTENING HOLES - INCH SERIES |
| I.S. EN 4645-005:2009 | AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY THREADED RING, SELF-LOCKING 1,25 MM DIAMETER FERRULE WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 005: PLUG - PRODUCT STANDARD |
| PREN 4640-004 : 200P1 | AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, RACK AND PANEL, MULTICONTACT, 1,25 DIAMETER FERRULE, WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 004: RECEPTACLE OPTICAL CONNECTOR - PRODUCT STANDARD |
| PREN 6051 : 200P3 | AEROSPACE SERIES - COLLARS, SWAGE LOCKING, SHEAR TYPE, IN ALUMINIUM ALLOY 3003, CHEMICAL FILM - INCH SERIES |
| PREN 6054 : 200P3 | AEROSPACE SERIES - COLLARS, SWAGE LOCKING, SHEAR TYPE, IN ALUMINIUM ALLOY 6061, CHEMICAL FILM - INCH SERIES |
| PREN 4199-003 : 200P2 | AEROSPACE SERIES - BONDING STRAPS FOR AIRCRAFT - PART 003: BONDING STRAP ASSEMBLIES WITH FLAT BRAIDED CONDUCTOR COPPER, TIN PLATED -65 DEGREES C UP TO 150 DEGREES C AND COPPER, NICKEL PLATED -65 DEGREES C UP TO 260 DEGREES C - PRODUCT STANDARD |
| PREN 4641-105 : 200P1 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 105: SEMI-LOOSE, RUGGEDIZED QUADRAXIAL CONSTRUCTION 62,5/125 [MU]M GI FIBRE NOMINAL, 5,72 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| PREN 4165-024 : 200P2 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 024: SINGLE MODULE PLUG - PRODUCT STANDARD |
| UNI EN 4641-105 : 2012 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 105: SEMI-LOOSE, RUGGEDIZED QUADRAXIAL CONSTRUCTION 62,5/125 [MU]M GI FIBRE NOMINAL, 5,72 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| PREN 4652-322 : DRAFT 2016 | AEROSPACE SERIES - CONNECTORS, COAXIAL, RADIO FREQUENCY - PART 322: TYPE 3, N INTERFACE - CRIMP VERSION - SQUARE FLANGE RECEPTACLE - PRODUCT STANDARD |
| PREN 6110 : 200P1 | AEROSPACE SERIES - BOLTS, BLIND - 100 DEGREE FLUSH HEAD - STAINLESS STEEL |
| PREN 3738 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREES NORMAL COUNTERSUNK HEAD WITH DOME, IN TITANIUM ALLOY TI 45,5 CB, METRIC SERIES |
| PREN 4510 : DRAFT 2017 | AEROSPACE SERIES - PIPE COUPLING, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY TI-P64001, PORT ADAPTER, STRAIGHT, DOUBLE END, WITH LOCKING RING |
| PREN 3750 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, 90 DEGREES CORNER, REDUCED SERIES, WITH COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 3768 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, ONE LUG, FIXED, REDUCED SERIES, WITH COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 4695 : DRAFT 2015 | AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - ASSEMBLY CODE G, H AND K |
| PREN 4691-1 : DRAFT 2015 | AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - PART 1: TECHNICAL SPECIFICATION |
| PREN 4233 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - UNIONS, WELDED, THREADED |
| PREN 4254 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, 60 DEGREES CORNER, WITH COUNTERBORE IN HEAT RESISTING STEEL, SILVER PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 4255 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, TWO LUG, WITH COUNTERBORE, IN HEAT RESISTING STEEL, SILVER PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 4219 : 200P1 | AEROSPACE SERIES - NUTS, HEXAGON, SELF-LOCKING BY DOMED PLASTIC CAP, NORMAL HEIGHT, NORMAL ACROSS FLATS, IN CORROSION RESISTING STEEL, PASSIVATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/120 DEGREES C |
| PREN 4297 : 200P1 | AEROSPACE SERIES - NUTS, HEXAGON, SELF-LOCKING BY PLASTIC RING, NORMAL HEIGHT, NORMAL ACROSS FLATS, IN CORROSION RESISTING STEEL, PASSIVATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/120 DEGREES C |
| PREN 4322 : 200P1 | AEROSPACE SERIES - BOLTS, DOUBLE HEXAGON HEAD WITH LOCKWIRE HOLES, RELIEVED SHANK, LONG THREAD, IN TITANIUM ALLOY TI-P63, ANODIZED, MOS[2] COATED - STRENGTH CLASS: 1100 MPA (AT AMBIENT TEMPERATURE) |
| PREN 4304 : 200P1 | AEROSPACE SERIES - SLEEVES, TUBULAR, FOR SHEAR SCREWS WITH FLUSH HEAD, IN CORROSION RESISTING STEEL, PASSIVATED, (0,25 MM WALL THICKNESS) |
| PREN 4312 : 200P1 | AEROSPACE SERIES - STUDS, COARSE TOLERANCE REDUCED SHANK, MEDIUM LENGTH THREAD, IN HEAT AND CORROSION RESISTING STEEL, WITH ALUMINIUM PIGMENTED COATING - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 4356 : 200P1 | AEROSPACE SERIES - SIX LOBE RECESS - DRIVERS, SHORT |
| PREN 4362 : 200P2 | AEROSPACE SERIES - RIVETS, SOLID 100 DEGREES COUNTERSUNK REDUCED HEAD, IN TITANIUM ALLOY TI 44,5 CB, METRIC SERIES |
| PREN 4390 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, SELF-ALIGNING, TWO LUG, IN HEAT RESISTING STEEL, SILVER PLATED, - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 4435 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID 100 DEGREES COUNTERSUNK NORMAL HEAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2301 (HASTELLOY X), INCH BASED SERIES |
| PREN 4421 : 200P1 | AEROSPACE SERIES - STUDS, IN TITANIUM ALLOY TI-P64001, MOS[2] COATED, WITH SERRATED LOCKING RING IN CORROSION RESISTING STEEL - STRENGTH CLASS: 1 100 MPA (AT AMBIENT TEMPERATURE) |
| PREN 4443 : 200P1 | AEROSPACE SERIES - NUTS, ELLIPTICAL CLINCH, SELF-LOCKING, MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286), MOS[2] COATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 4495 : 200P1 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, WITH ALUMINIUM PIGMENTED COATING - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 4029 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES BULKHEAD BRANCH |
| PREN 4035 : 200P1 | AEROSPACE SERIES - ROD ENDS, ADJUSTABLE WITH SELF-ALIGNING DOUBLE ROW BALL BEARING IN CORROSION RESISTING STEEL, REDUCED INTERNAL RADIAL CLEARANCE AND THREADED SHANK IN TITANIUM ALLOY - DIMENSIONS AND LOADS |
| PREN 4693 : DRAFT 2015 | AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - ASSEMBLY CODE A, B AND C |
| PREN 4551 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 37 DEGREES, IN HEAT RESISTING STEEL - SWIVEL NUTS - INCH SERIES |
| PREN 4108 : 200P1 | AEROSPACE SERIES - WRENCHES, CROW FOOT, ATTACHMENT SOCKET, SOCKET DRIVE |
| PREN 4076 : 200P1 | AEROSPACE SERIES - SCREWS, PAN HEAD, SLOTTED, THREADED TO HEAD, IN CORROSION RESISTING STEEL, PASSIVATED - CLASSIFICATION: 490 MPA (AT AMBIENT TEMPERATURE)/425 DEGREE C |
| PREN 3728 : 200P1 | AEROSPACE SERIES - SHAFT-NUTS, SELF-LOCKING, LEFT-HAND THREAD, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED |
| PREN 3743 : 200P1 | AEROSPACE SERIES - STRAIGHT PINS, SPRING TYPE, HEAVY DUTY, IN CORROSION RESISTING SPRING STEEL, PASSIVATED |
| PREN 4622 : 200P1 | AEROSPACE SERIES - INSERTS, MJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS, IN HEAT RESISTING STEEL FE-PA2601 (A286), MOS[2] COATED |
| PREN 4634 : 200P1 | AEROSPACE SERIES - SCREWS, 100 DEGREE COUNTERSUNK HEAD, SIX LOBE RECESS, SHORT THREAD, IN HEAT RESISTING STEEL FE-PA2601 (A286), PASSIVATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C |
| PREN 4126 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, TWO LUG, REDUCED SERIES, WITH INCREMENTAL COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| PREN 4198 : 200P1 | AEROSPACE SERIES - ROD-ENDS, ADJUSTABLE SELF-ALIGNING PLAIN BEARING WITH SELF-LUBRICATING LINER AND THREADED SHANK IN CORROSION RESISTING STEEL - DIMENSIONS AND LOADS |
| PREN 4013 : 200P1 | AEROSPACE SERIES - SHANK NUTS, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), SILVER PLATED - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/600 DEGREE C |
| PREN 4028 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, SWIVEL NUT ON RUN |
| PREN 3753 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, 60 DEGREES CORNER, WITH COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 4539-3 : 200P1 | AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF LUBRICATING LINER - ELEVATED LOAD UNDER LOW OSCILLATIONS - WIDE SERIES - DIMENSIONS AND LOADS - PART 003: INCH SERIES WITH LOW FRICTION COEFFICIENT |
| PREN 4039 : 200P1 | AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER REDUCED STARTING TORQUE - NORMAL WIDE SERIES - DIMENSIONS AND LOADS |
| PREN 4083 : 200P1 | AEROSPACE SERIES - NUTS, BIHEXAGONAL, SELF-LOCKING, REDUCED HEIGHT, WITH COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| TR 3198 : 2015 | AEROSPACE SERIES - MANUFACTURERS' IDENTIFICATION MONOGRAMS AND MARKS FOR EN AEROSPACE PRODUCTS |
| I.S. EN 6105:2016 | AEROSPACE SERIES - STUD WITH SHOULDER |
| I.S. EN 3385:2012 | AEROSPACE SERIES - RINGS RETAINING, EXTERNAL, AXIAL MOUNTING, STEEL, VACUUM CADMIUM PLATED |
| I.S. EN 4804:2017 | AEROSPACE SERIES - FLANGE COUPLINGS - SWIVEL FLANGE WITH 4 FASTENING HOLES, IN NICKEL ALLOY - INCH SERIES |
| I.S. EN 4266:2013 | AEROSPACE SERIES - BEARING SPHERICAL PLAIN, METAL TO METAL, IN CORROSION RESISTING STEEL, CADMIUM PLATED - WIDE SERIES - DIMENSIONS AND LOADS - INCH SERIES |
| NFL 24 682 : 1994 XP | SERIE AEROSPATIALE - ECROUS A SERTIR, A FREINAGE INTERNE, EN ALLIAGE RESISTANT A CHAUD A BASE DE NICKEL NI-P100HT (INCONEL 718), ARGENTES SUR FILETAGE - CLASSIFICATION: 1 550 MPA (A TEMPERATURE AMBIANTE)/600 DEGRES CELSIUS |
| I.S. EN 4806:2017 | AEROSPACE SERIES - FLANGE COUPLINGS - WELD COUPLING, STRAIGHT, IN NICKEL ALLOY - INCH SERIES |
| NF EN 4636 : 2009 | AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK HEAD, SIX LOBE RECESS, SHORT THREAD, IN TITANIUM ALLOY TI-P64001, WITH ALUMINIUM PIGMENTED COATING - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| I.S. EN 6090:2016 | AEROSPACE SERIES - WASHER, RETAINING |
| I.S. EN 4130:2009 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN TITANIUM ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| UNI EN 3538 : 2011 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, TWO LUG, REDUCED SERIES, WITH COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| EN 4652-421:2017 | Aerospace series - Connectors, coaxial, radio frequency - Part 421: Type 4, C interface - Crimp assembly version - Right angle plug - Product standard |
| EN 2584:2001 | Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series - Elevated load at ambient temperature - Dimensions and loads |
| I.S. EN 6080:2016 | AEROSPACE SERIES - RIVET, 100 DEGREES NORMAL FLUSH HEAD, CLOSE TOLERANCE - INCH SERIES |
| I.S. EN 4165-005:2007 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 005: STACKABLE MOUNTING RECEPTACLE 2 AND 4 MODULES, SERIES 3 - PRODUCT STANDARD |
| I.S. EN 3710:2008 | AEROSPACE SERIES - SOCKETS, BI-HEXAGONAL - TECHNICAL SPECIFICATION |
| I.S. EN 4399:2008 | AEROSPACE SERIES - RINGS, THREADED, SELF-LOCKING, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED |
| DIN EN 2923:1997-02 (Draft) | AEROSPACE SERIES - NUTS, HEXAGON, PLAIN, REDUCED HEIGHT, REDUCED ACROSS FLATS, IN HEAT RESISTING STEEL, SILVER PLATED - CLASSIFICATION: 600 MPA (AT AMBIENT TEMPERATURE)/425 DEGREE C |
| I.S. EN 4652-222:2017 | AEROSPACE SERIES - CONNECTORS, COAXIAL, RADIO FREQUENCY - PART 222: TYPE 2, TNC INTERFACE - CRIMP VERSION - SQUARE FLANGE RECEPTACLE - PRODUCT STANDARD |
| I.S. EN 2879:2017 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, AIR RESISTANT, SEALING, FLOATING, TWO LUG, WITH COUNTERBORE, IN CORROSION RESISTING STEEL, PASSIVATED, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| UNI EN 4673-006 : 2011 | AEROSPACE SERIES - INSERTS, UNJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS - PART 006: IN HEAT RESISTING STEEL FE-PA2601(A286), MOS[2] COATED |
| BS EN 2584:2001 | Aerospace series. Bearings, spherical plain in corrosion resisting steel with self-lubricating liner. Narrow series. Elevated load at ambient temperature. Dimensions and loads |
| NF EN 4493 : 2008 | AEROSPACE SERIES - INSERTS, SCREW THREAD, HELICAL COIL, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH1801 (NI-P96HT, NIMONIC 90), SILVER PLATED |
| NF EN 4673-006 : 2011 | AEROSPACE SERIES - INSERTS, UNJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS - PART 006: IN HEAT RESISTING STEEL FE-PA2601 (A286), MOS[2] COATED |
| EN 4122:2018 | Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread - Classification: 1 100 MPa (at ambient temperature) / 650 °C |
| NF EN 4623 : 2010 | AEROSPACE SERIES - INSERTS, MJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718), SILVER PLATED |
| UNI EN 3373-007 : 2012 | AEROSPACE SERIES - TERMINAL LUGS AND IN-LINE SPLICES FOR CRIMPING ON ELECTRIC CONDUCTORS - PART 007: NICKEL PLATED ALUMINIUM TERMINAL LUGS FOR CRIMPING ON NICKEL PLATED ALUMINIUM CABLE FOR INCH SERIES STUDS - PRODUCT STANDARD |
| I.S. EN 3672:2016 | AEROSPACE SERIES - SHANK NUTS, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY), SILVER PLATED, FOR 30 DEGREE C SWAGE - CLASSIFICATION: 1210 MPA (AT AMBIENT TEMPERATURE)/730 DEGREE C |
| I.S. EN 3244:2002 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30 MINUTES IN TITANIUM ALLOY - UNIONS, DOUBLE ENDED |
| I.S. EN 3542:1998 | AEROSPACE SERIES - INSERTS, SCREW THREAD, HELICAL COIL, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2801 (INCONEL X750) |
| I.S. EN 2585:2002 | AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER - WIDE SERIES - ELEVATED LOAD AT AMBIENT TEMPERATURE - DIMENSIONS AND LOADS |
| I.S. EN 2584:2002 | AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER - NARROW SERIES - ELEVATED LOAD AT AMBIENT TEMPERATURE - DIMENSIONS AND LOADS |
| I.S. EN 3034:2009 | AEROSPACE SERIES - NUTS, SELF-LOCKING, HEXAGONAL WITH CAPTIVE WASHER - IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER COATED - CLASSIFICATION: 1100 MPA/425 DEGREES C |
| DIN EN 2935:1996-05 | AEROSPACE SERIES - BOLTS, T-HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY) - CLASSIFICATION: 1210 MPA (AT AMBIENT TEMPERATURE)/730 DEGREE C |
| DIN EN 2928:1996-04 | AEROSPACE SERIES - BOLTS, DOUBLE HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), SILVER PLATED - CLASSIFICATION: 1275 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C |
| DIN EN 3038:1996-11 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN HEAT AND CORROSION RESISTING STEEL, PASSIVATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| DIN EN 2936:1996-05 | AEROSPACE SERIES - BOLTS, T-HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY), SILVER PLATED - CLASSIFICATION 1210 MPA (AT AMBIENT TEMPERATURE)/730 DEGREE C |
| DIN EN 3010:1998-07 | AEROSPACE SERIES - BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY) - CLASSIFICATION: 1210 MPA (AT AMBIENT TEMPERATURE)/730 DEGREES C |
| DIN EN 3136:1996-04 | AEROSPACE SERIES - RIVETS, SOLID, UNIVERSAL HEAD, IN CORROSION RESISTING STEEL FE-PA92HT, PASSIVATED, INCH BASED SERIES |
| DIN EN 2138:2000-02 | AEROSPACE SERIES - WASHERS, FLAT, IN STEEL, CADMIUM PLATED |
| DIN EN 2933:1996-05 | AEROSPACE SERIES - BOLTS, T-HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718) - CLASSIFICATION: 1275 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C |
| DIN EN 3013:1995-11 | AEROSPACE SERIES - NUTS, BIHEXAGONAL, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY), SILVER PLATED - CLASSIFICATION: 1210 MPA (AT AMBIENT TEMPERATURE)/730 DEGREES C |
| DIN EN 2122:1996-03 | AEROSPACE SERIES - WASHERS, FLAT, IN ALUMINIUM ALLOY, ANODIZED OR CHROMATED |
| DIN EN 2654:1996-10 | AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, SLOTTED THREADED TO HEAD, IN BRASS, TIN PLATED - CLASSIFICATION: 380 MPA (AT AMBIENT TEMPERATURE)/80 DEGREES C |
| DIN EN 2874:1996-09 | AEROSPACE SERIES - BOLTS, LARGE BIHEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN HEAT RESISTING NICKEL BASE ALLOY, PASSIVATED - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| DIN EN 2942:1998-07 | AEROSPACE SERIES - INSERT, SCREW THREAD, HELICAL COIL, SELF-LOCKING, IN HEAD RESISTING NICKEL BASE ALLOY NI-PH2801 (INCONEL X750), SILVER PLATED |
| DIN EN 2932:1996-04 | AEROSPACE SERIES - BOLTS, T-HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C |
| DIN EN 2930:1996-04 | AEROSPACE SERIES - BOLTS, DOUBLE HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY), SILVER PLATED - CLASSIFICATION: 1210 MPA (AT AMBIENT TEMPERATURE)/730 DEGREE C |
| DIN EN 2897:1996-09 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| DIN EN 3011:1998-07 | AEROSPACE SERIES - BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY), SILVERPLATED - CLASSIFICATION: 1210 MPA (AT AMBIENT TEMPERATURE)/730 DEGREES C |
| DIN EN 2886:1996-09 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA/235 DEGREE C |
| BS EN 3052:2009 | Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated. Classification: 1100 MPa (at ambient temperature) / 425 °C |
| BS EN 4303:2005 | Aerospace series. Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness) |
| BS EN 4041:2006 | Aerospace series. Bearings, airframe rolling. Rigid single row ball bearings in corrosion resisting steel, with extended inner ring and flanged alignment bush. Dimensions and loads |
| BS EN 2553:1993 | Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2017A, inch based series |
| BS EN 4354:2006 | Aerospace series. Six lobe recess. Drivers, relieved |
| BS EN 3270:2001 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Blanking plug with lockring |
| BS EN 4554:2003 | Aerospace series. Pipe coupling 37°, spherical, in heat resisting steel. Straight unions, threaded. Inch series |
| BS EN 4165-004:2007 | Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous Stackable mounting receptacle 2 and 4 modules, series 2. Product standard |
| BS EN 3855:2002 | Aerospace series. Pipe couplings, 60° spherical, in titanium alloy TI-P64001. Caps |
| BS EN 4561:2003 | Aerospace series. Pipe coupling, welded, in heat resisting steel. Elbow 90°. Inch series |
| BS EN 4165-023:2007 | Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous Tooling for assembly receptacle coding component. Product standard |
| BS EN 4019:2001 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Elbows 90°, welded |
| BS EN 3725:2004 | Aerospace series. Screws, pan head, six lobe recess, normal shank, long thread, in titanium alloy TI-P64001, anodized, MoS<sub>2</sub> coated. Strength class: 1100 MPa (at ambient temperature) |
| BS EN 4610:2005 | Aerospace series. Pipe coupling with 8° 30\' in titanium alloy. Elbows 45°, with thrust wire nut |
| BS EN 4021:2001 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Elbows 90°, bulkhead |
| BS EN 3536:2006 | Aerospace series. Nuts, hexagon, self-locking, in heat resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315°C |
| BS EN 4011:2004 | Aerospace series. Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated. Classification: 1550 MPa (at ambient temperature)/600°C |
| BS EN 3869:2004 | Aerospace series. Pipe couplings, loose flanges and seals. Seals in fluorocarbon rubber and armature in aluminium alloy |
| BS EN 4033:2007 | Aerospace series. Bearings, airframe rolling. Rigid single row ball bearings in corrosion resisting steel. Diameter series 8 and 9, reduced internal radial clearance. Dimensions and loads |
| BS EN 2139:1990 | Specification for washers, flat heat resisting steel |
| BS EN 4562:2003 | Aerospace series. Pipe coupling, welded, in heat resisting steel. Reductors. Inch series |
| BS EN 4306:2005 | Aerospace series. Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness) |
| BS EN 2148:1993 | Rivets, solid, universal head, in aluminium alloy 5056A, inch based series |
| BS EN 3301:2007 | Aerospace series. Bolts, T-head, close tolerance medium thread length in heat resisting steel FE-PM1708 (FV535), uncoated. Classification: 1000 MPa/550°C |
| BS EN 4188:2001 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Elbows 90° bulkhead, long, welded end |
| BS EN 4192:2001 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Tees, reduced bulkhead branch |
| BS EN 3326:2007 | Aerospace series. Bolts, D-head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-PH2601 (INCO 718). Classification: 1275 MPa/650°C, unplated |
| I.S. EN 2648:2013 | AEROSPACE SERIES - WASHERS, CONCAVE, IN ALLOY STEEL, CADMIUM PLATED |
| I.S. EN 4119:2005 | AEROSPACE SERIES - NUTS, BIHEXAGONAL, SELF-LOCKING, DEEP COUNTERBORED, IN HEAT RESISTING STEEL FE-PA2601 (A286), SILVER PLATED ON THREAD - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C |
| I.S. EN 4025:2010 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30 MINUTES IN TITANIUM ALLOY - ELBOWS 45 DEGREE, BULKHEAD |
| I.S. EN 3869:2005 | AEROSPACE SERIES - PIPE COUPLINGS, LOOSE FLANGES AND SEALS - SEALS IN FLUOROCARBON RUBBER AND ARMATURE IN ALUMINIUM ALLOY |
| I.S. EN 3725:2005 | AEROSPACE SERIES - SCREWS, PAN HEAD, SIX LOBE RECESS, NORMAL SHANK, LONG THREAD, IN TITANIUM ALLOY TI-P64001, ANODIZED, MOS[2] COATED - STRENGTH CLASS: 1100 MPA (AT AMBIENT TEMPERATURE) |
| I.S. EN 3832:2005 | AEROSPACE SERIES - BOLTS, DOUBLE HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718) - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C |
| I.S. EN 4352:2005 | AEROSPACE SERIES - BOLTS, DOUBLE HEXAGON HEAD WITH LOCKWIRE HOLES, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718), MOS[2] COATED - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/425 DEGREE C |
| I.S. EN 4322:2005 | AEROSPACE SERIES - BOLTS, DOUBLE HEXAGON HEAD WITH LOCKWIRE HOLES, RELIEVED SHANK, LONG THREAD, IN TITANIUM ALLOY TI-P64001, ANODIZED, MOS[2] COATED - STRENGTH CLASS: 1100 MPA (AT AMBIENT TEMPERATURE) |
| I.S. EN 4321:2005 | AEROSPACE SERIES - BOLTS, DOUBLE HEXAGON HEAD WITH LOCKWIRE HOLES, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKELBASE ALLOY NI-PH2601 (INCONEL 718), SILVER PLATED - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C |
| I.S. EN 3831:2005 | AEROSPACE SERIES - INSERTS, THICKWALL, SELF-LOCKING, MJ THREADS, IN HEAT RESISTING STEEL FE-PM3801 (17-4PH), MOS[2] COATED |
| I.S. EN 4165-013:2016 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREE C CONTINUOUS - PART 013: CABLE CLAMP 2 AND 4 MODULES FOR CONNECTORS, SERIES 2 AND SERIES 3 - PRODUCT STANDARD |
| I.S. EN 3264:2010 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTE IN TITANIUM ALLOY - THRUST WIRE NUTS |
| I.S. EN 2888:2006 | AEROSPACE SERIES - METRIC BOLTS, NORMAL HEXAGON HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN CORROSION RESISTING STEEL, PASSIVATED - CLASSIFICATION: 600 MPA (AT AMBIENT TEMPERATURE)/425 DEGREE C |
| EN 4036:2006 | Aerospace series - Rod ends, adjustable with self-aligning double row ball bearing and threaded shank in corrosion resisting steel, reduced internal radial clearance - Dimensions and loads |
| I.S. EN 4168:2005 | AEROSPACE SERIES - CLIPS, SPRING TENSION, THREE PARTS - OUTER CLIPS IN HEAT RESISTING STEEL FE-PA2601 (A286) |
| I.S. EN 4113:2009 | AEROSPACE SERIES - CLAMPS, LOOP ("P" TYPE) IN CORROSION RESISTING STEEL, PASSIVATED WITH RUBBER CUSHIONING - DIMENSIONS, MASSES |
| I.S. EN 4167:2005 | AEROSPACE SERIES - CLIPS, SPRING TENSION, THREE PARTS - INNER CLIPS IN HEAT RESISTING STEEL FE-PA2601 (A286) |
| I.S. EN 4551:2014&LC:2014-12 | AEROSPACE SERIES - PIPE COUPLING, 37 DEGREES, IN HEAT RESISTING STEEL - SWIVEL NUTS - INCH SERIES |
| I.S. EN 4018:2009 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - ELBOWS 90 DEGREES WITH THRUST WIRE NUT |
| I.S. EN 4531-004:2012 | AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY TRIPLE START THREADED RING - FLUSH CONTACTS - PART 004: JAM NUT RECEPTACLE - PRODUCT STANDARD |
| I.S. EN 4531-005:2012 | AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY TRIPLE START THREADED RING - FLUSH CONTACTS - PART 005: PLUG - PRODUCT STANDARD |
| I.S. EN 2549:2006 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS[2] LUBRICATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| I.S. EN 3014:2015 | AEROSPACE SERIES - SHANK NUTS, SELF-LOCKING, SERRATED, IN HEAT RESISTING STEEL FE-PA2601 (A286) - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| I.S. EN 3730:2009 | AEROSPACE SERIES - CLAMPS, SADDLE FIXED AND SLIDING VERSION IN ALUMINUM ALLOY WITH RUBBER CUSHIONING - DIMENSION, MASSES |
| I.S. EN 4012:2005 | AEROSPACE SERIES - NUTS, BIHEXAGONAL, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718), MOS[2] COATED - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/425 DEGREE C |
| I.S. EN 4013:2005 | AEROSPACE SERIES - SHANK NUTS, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718), SILVER PLATED - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/600 DEGREE C |
| I.S. EN 4165-018:2015 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 018: PROTECTIVE COVER FOR ALL RECEPTACLES SERIES 2 - PRODUCT STANDARD |
| EN 4035:2006 | Aerospace series - Rod ends, adjustable with self-aligning double row ball bearing in corrosion resisting steel, reduced internal radial clearance and threaded shank in titanium alloy - Dimensions and loads |
| I.S. EN 3907:2005 | AEROSPACE SERIES - BOLTS, DOUBLE HEXAGON HEAD, NORMAL SHANK, LONG THREAD, IN TITANIUM ALLOY TI-P64001, MOS[2] COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/350 DEGREE C |
| I.S. EN 4020:2009 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30 MINUTES IN TITANIUM ALLOY - ELBOWS 90 DEGREE, WELDED END WITH THRUST WIRE NUT |
| I.S. EN 3867:2005 | AEROSPACE SERIES - PIPE COUPLINGS, LOOSE FLANGES AND SEALS - FLANGES IN TITANIUM ALLOY TI-P64001 |
| I.S. EN 3820:2017 | AEROSPACE SERIES - METRIC BOLTS, NORMAL HEXAGON HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| I.S. EN 3868:2005 | AEROSPACE SERIES - PIPE COUPLINGS, LOOSE FLANGES AND SEALS - FLANGE CONNECTORS, WELDED, IN TITANIUM ALLOY TI-P64001 |
| I.S. EN 4024:2009 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30 MINUTES IN TITANIUM ALLOY - ELBOWS 45 DEGREE WELDED END WITH THRUST WIRE NUT |
| I.S. EN 4056-001:2015 | AEROSPACE SERIES - CABLE TIES FOR HARNESSES - PART 001: TECHNICAL SPECIFICATION |
| I.S. EN 4114:2009 | AEROSPACE SERIES - CLAMPS, LOOP ("P" TYPE) IN ALUMINIUM ALLOY WITH RUBBER CUSHIONING - DIMENSIONS, MASSES |
| I.S. EN 2889:2006 | AEROSPACE SERIES - METRIC BOLTS, NORMAL HEXAGON HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| I.S. EN 4023:2010 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30 MINUTES IN TITANIUM ALLOY - ELBOWS 45 DEGREE |
| I.S. EN 2647:2006 | AEROSPACE SERIES - NUTS, HEXAGONAL, SELF-LOCKING, BALL SEAT, IN ALLOY STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| I.S. EN 4552:2015 | AEROSPACE SERIES - PIPE COUPLING 37 DEGREES, SPHERICAL, IN HEAT RESISTING STEEL - STRAIGHT NIPPLES, WELDED END - INCH SERIES |
| I.S. EN 4323:2005 | AEROSPACE SERIES - SCREWS, 100 DEGREE COUNTERSUNK HEAD, SIX LOBE RECESS, THREADED TO HEAD, IN TITANIUM ALLOY TI-P64001, ANODIZED, MOS[2] COATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/350 DEGREE C |
| I.S. EN 3268:2014 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30 MINUTES IN TITANIUM ALLOY - PRESSURE PLUGS |
| I.S. EN 4116:2005 | AEROSPACE SERIES - NUTS, HEXAGONAL, SELF-LOCKING, IN HEAT RESISTING STEEL FE-PA2601 (A286), SILVER PLATED ON THREAD - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREE C |
| I.S. EN 4120:2005 | AEROSPACE SERIES - NUTS, BIHEXAGONAL, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH1302 (WASPALOY), SILVER PLATED ON THREAD - CLASSIFICATION: 1210 MPA (AT AMBIENT TEMPERATURE)/730 DEGREE C |
| I.S. EN 4011:2005 | AEROSPACE SERIES - NUTS, BIHEXAGONAL, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718), SILVER PLATED - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/600 DEGREE C |
| I.S. EN 4166:2005 | AEROSPACE SERIES - CLIPS, SPRING TENSION, THREE PARTS - PTFE BUSHES |
| I.S. EN 4118:2005 | AEROSPACE SERIES - NUTS, BIHEXAGONAL, SELF-LOCKING, IN HEAT RESISTING STEEL FE-PA2601 (A286), SILVER PLATED ON THREAD - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C |
| I.S. EN 3015:2015 | AEROSPACE SERIES - SHANK NUTS, SELF-LOCKING, SERRATED, IN HEAT RESISTING STEEL FE-PA2601 (A286), SILVER PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C |
| I.S. EN 4121:2015 | AEROSPACE SERIES - SHANK NUTS, SERRATED, SELF-LOCKING, IN HEAT RESISTING STEEL FE-PA2601 (A286), SILVER PLATED ON THREAD - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| I.S. EN 2859:2006 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED, METRIC SERIES - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| I.S. EN 4531-003:2012 | AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY TRIPLE START THREADED RING - FLUSH CONTACTS - PART 003: SQUARE FLANGE RECEPTACLE - PRODUCT STANDARD |
| I.S. EN 3726:2005 | AEROSPACE SERIES - NUTS, SELF-LOCKING, CLIP, IN HEAT RESISTING STEEL FE-PA2601 (A286), MOS[2] COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREE C |
| I.S. EN 4117:2005 | AEROSPACE SERIES - NUTS, BIHEXAGONAL, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718), SILVER PLATED ON THREAD - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/600 DEGREE C |
| NF EN 3008 : 1998 | AEROSPACE SERIES - BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718) - CLASSIFICATION: 1275 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| 07/30167574 DC : 0 | BS EN 4645-005 - AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY THREADED RING, 1,25 MM DIA. - FERRULE WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 005: PLUG - PRODUCT STANDARD |
| 11/30242277 DC : 0 | BS EN 4692 - AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - LOCKING CLIP |
| 96/702217 DC : 0 | PREN 4148 - AEROSPACE SERIES - PIPE COUPLINGS 60 DEGREES; IN ANODIZED ALUMINIUM ALLOY; TEES |
| BS EN 4073:2016 | Aerospace series. Screws, pan head, hexalobular recess, coarse tolerance shank, medium length thread, in alloy steel, cadmium plated. Classification: 1 100 MPa (at ambient temperature) / 235 °C |
| 15/30331399 DC : 0 | BS EN 6096 - AEROSPACE SERIES - BEARINGS SPHERICAL PLAIN WITH SELF-LUBRICATING LINER EXTRA WIDE INNER RING IN CORROSION RESISTING STEEL - DIMENSIONS AND LOADS - INCH SERIES |
| UNI EN 2863 : 2011 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, 90 DEGREES CORNER, WITH COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| BS EN 3034:2009 | Aerospace series. Nuts, self-locking, hexagonal with captive washer. In heat resisting steel FE-PA92HT (A286), silver coated. Classification: 1100 MPa/425 °C |
| BS EN 3227:2010 | Aerospace series. Nuts, hexagonal, plain, normal height, normal across flats, in steel, cadmium plated, left hand thread. Classification: 1100 MPa (at ambient temperature)/235°C |
| I.S. EN 6101:2016 | AEROSPACE SERIES - RIVET, 100 DEGREES MEDIUM FLUSH HEAD, CLOSE TOLERANCE - INCH SERIES |
| BS EN 4702-03:2017 | Aerospace series. Quick release fastening systems for non-structural and lining applications Stud - quick-release and locking |
| 14/30310866 DC : 0 | BS EN 4836 - AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREE CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING REDUCER- FLARED END - WITH EXTRA FINE THREAD PITCH - INCH SERIES |
| I.S. EN 4802:2017 | AEROSPACE SERIES - FLANGE COUPLINGS - SWIVEL FLANGE WITH 3 FASTENING HOLES, IN NICKEL ALLOY - INCH SERIES |
| I.S. EN 3228:2010 | AEROSPACE SERIES - NUTS, HEXAGONAL, PLAIN, REDUCED HEIGHT, NORMAL ACROSS FLATS, IN STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| 06/30145490 DC : 0 | EN 4634 - AEROSPACE SERIES - SCREWS, 100 DEGREE COUNTERSUNK HEAD, SIX LOBES RECESS, SHORT THREAD, IN HEAT RESISTING STEEL FE-PA2601, PASSIVATED - CLASSIFICATION - 900 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C |
| 16/30342532 DC : 0 | BS EN 3542 - AEROSPACE SERIES - INSERTS, SCREW THREAD, HELICAL COIL, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2801 (INCONEL X750) |
| BS EN 3706:2012 | Aerospace series. Headless threaded plugs, cross recess, in aluminium alloy 5086 |
| I.S. EN 3614:2009 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL FE-PA2601 (A286), SILVER PLATED - CLASSIFICATION: 900 MPA/650 DEGREES C |
| 16/30342237 DC : 0 | BS EN 8.3553 - AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, SPIRAL DRIVE RECESS, SHORT THREAD, IN HEAT RESISTING STEEL FE-PA2601 (A286), PASSIVATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| BS EN 4645-004:2009 | Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder Jam nut receptacle. Product standard |
| BS EN 3226:2009 | Aerospace series. Nuts, hexagon, plain, normal height, normal across flats, steel, cadmium plated. Classification: 1100 MPa/235°C |
| I.S. EN 3757:2009 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, SELF-ALIGNING, TWO LUGS, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| BS EN 4136:2009 | Aerospace series. Bolts, normal bi-hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. Classification: 1100 MPa at ambient temperature)/235°C |
| BS EN 4266:2013 | Aerospace series. Bearing spherical plain, metal to metal, in corrosion resisting steel, cadmium plated. Wide series. Dimensions and loads. Inch series |
| I.S. EN 4808:2017 | AEROSPACE SERIES - FLANGE COUPLINGS - WELD COUPLING, 90 DEGREES ELBOW, IN NICKEL ALLOY - INCH SERIES |
| 98/714591 DC : DRAFT SEP 1998 | PREN 4494 - AEROSPACE SERIES - SPLIT RING, IN STEEL |
| BS EN 4806:2017 | Aerospace series. Flange couplings. Weld coupling, straight, in nickel alloy. Inch series |
| BS EN 4641-103:2010 | Aerospace series. Cables, optical 125 μm diameter cladding Semi-loose, ruggedized simplex construction 62,5/125 μm GI fibre nominal 2,74 mm, outside diameter. Product standard |
| 17/30368045 DC : 0 | PREN 4857-1 - AEROSPACE SERIES- MINIATURE CONNECTORS, HIGH DENSITY, ELECTRICAL, CIRCULAR, SCOOP-PROOF, TRIPLE START THREADED COUPLING, OPERATING TEMPERATURES 175 DEGREES C CONTINUOUS OR 200 DEGREES C CONTINUOUS - SHELL SIZES: 05 TO 07 - PART 001: TECHNICAL SPECIFICATION |
| I.S. EN 4075:2008 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN CORROSION RESISTING STEEL, PASSIVATED - CLASSIFICATION: 490 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| 01/709650 DC : DRAFT JUN 2001 | EN 4165-015 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES CELSIUS CONTINUOUS - PART 015: ROUND CHIMNEY FOR ACCESSORIES (1 PER MODULE CAVITY) - PRODUCT STANDARD |
| BS EN 4078:2009 | Aerospace series. Inserts, threaded, thin wall, locked and self-locking, in heat resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature) / 315°C |
| 96/702223 DC : 0 | PREN 4226 - AEROSPACE SERIES - PIPE COUPLINGS 60 DEGREES; IN ANODIZED ALUMINIUM ALLOY, UNIONS; ELBOWS 90 DEGREES WITH FLEXIBLE TUBE FITTING END |
| 09/30210066 DC : DRAFT SEP 2009 | BS EN 4531-003 - AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY THREADED RING - FLUSH CONTACTS - PART 003: SQUARE FLANGE RECEPTACLE - PRODUCT STANDARD |
| BS EN 4641-102:2009 | Aerospace series. Cables, optical 125 μm outside diameter cladding Semi-loose 62,5/125 μm GI fibre nominal 1,8 mm outside diameter. Product standard |
| I.S. EN 4641-102:2009 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M OUTSIDE DIAMETER CLADDING - PART 102: SEMI-LOOSE 62,5/125 [MU]M GI FIBRE NOMINAL 1,8 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| 12/30260907 DC : 0 | BS EN 4712 - AEROSPACE SERIES - NUTS, 12-POINT FLANGE, SELF-LOCKING, CONTINUOUS FIBRE REINFORCED-PEEK COMPOSITE, TEMPERATURE RANGE -65 DEGREES C TO 135 DEGREES C - INCH SERIES |
| BS EN 4673-005:2010 | Aerospace series. Inserts, UNJ threads, self-locking, with self-broaching keys In heat resisting nickel base alloy NI-P101HT (WASPALOY), silver plating |
| UNI EN 4673-004 : 2011 | AEROSPACE SERIES - INSERTS, UNJ THREADS, SELF-LOCKING, WITH SELF- BROACHING KEYS - PART 004: IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), SILVER PLATING |
| UNI EN 3768 : 2012 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, ONE LUG, FIXED, REDUCED SERIES, WITH COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| NF EN 4641-104 : 2011 | AEROSPACE SERIES - CABLES, OPTICAL 125 MM DIAMETER CLADDING - PART 104: SEMI-LOOSE, RUGGEDIZED DUPLEX CONSTRUCTION 62,5/125 MM GI FIBRE NOMINAL, 4,95 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| 13/30288694 DC : 0 | BS EN 4073 - AEROSPACE SERIES - SCREWS, PAN HEAD, SIX LOBE RECESS, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| BS EN 2869:2009 | Aerospace series. Nuts, hexagonal, slotted/castellated, normal height, normal accross flats, in heat resisting steel, passivated. Classification: 1100 MPa (at ambient temperature) / 650°C |
| 13/30293653 DC : 0 | BS EN 4165-003 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 003: MODULES SERIES 2 AND SERIES 3 - PRODUCT STANDARD |
| 17/30356163 DC : 0 | BS EN 4859 - AEROSPACE SERIES - SENSOR BASED CLAMP LOAD DETERMINATION/HIGH TENSILE BOLTS - TECHNICAL SPECIFICATION |
| 16/30352094 DC : DRAFT NOV 2016 | BS EN 2894 - AEROSPACE SERIES - NUTS, BIHEXAGONAL, SELF-LOCKING, WITH COUNTERBORE, IN HEAT RESISTING NICKEL BASE ALLOY, PASSIVATED, MOS[2] LUBRICATED - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| BS EN 4624:2010 | Aerospace series. Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plate |
| BS EN 2863:2010 | Aerospace series. Nuts, anchor, self-locking, fixed, 90° corner, with counterbore, in heat resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature) / 315°C |
| 00/717162 DC : 0 | PREN 3373-007 - AEROSPACE SERIES - TERMINAL LUGS AND IN-LINE SPLICES FOR CRIMPING ON ELECTRICAL CONDUCTORS - PART 007: NICKEL PLATED ALUMINIUM TERMINAL LUGS FOR CRIMPING ON NICKEL PLATED ALUMINIUM CABLE FOR INCH SERIES STUDS - PRODUCT STANDARD |
| 16/30342530 DC : 0 | BS EN 2584 - AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN IN CORROSION RESISTING STEEL WITH SELF LUBRICATING LINER - NARROW SERIES - ELEVATED LOAD AT AMBIENT TEMPERATURE - DIMENSIONS AND LOADS |
| NF EN 3228 : 2010 | AEROSPACE SERIES - NUTS, HEXAGONAL, PLAIN, REDUCED HEIGHT, NORMAL ACROSS FLATS, IN STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| BS EN 4702-04:2017 | Aerospace series. Quick release fastening systems for non-structural and lining applications Spring clamp |
| BS EN 2865:2009 | Aerospace series. Nuts, anchor, self-locking, floating, two lugs, with counterbore, in heat resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature) / 315 °C |
| 11/30254179 DC : 0 | BS EN 4652-211 - AEROSPACE SERIES - CONNECTORS, COAXIAL, RADIO FREQUENCY - PART 211: TYPE 2, TNC INTERFACE, CLAMP NUT ASSEMBLY VERSION - RIGHT ANGLE PLUG - PRODUCT STANDARD |
| 14/30300810 DC : 0 | BS EN 2944 - AEROSPACE SERIES - INSERTS, SCREW THREAD, HELICAL COIL, SELF-LOCKING, IN CORROSION RESISTING STEEL FE-PA3004 |
| 17/30370706 DC : 0 | BS EN 3278 - AEROSPACE SERIES - SLEEVES, TUBULAR, PROTRUDING HEAD, IN CORROSION RESISTING STEEL (0,25 MM WALL THICKNESS) |
| BS EN 6090:2016 | Aerospace series. Washer, retaining |
| BS EN 4534-2:2009 | Aerospace series. Bushes, plain in aluminium alloy with self-lubricating liner, elevated load Dimensions and loads. Inch series |
| UNI EN 3843 : 2010 | AEROSPACE SERIES - NUTS, BIHEXAGONAL, SELF-LOCKING, WITH COUNTERBORE, IN HEAT RESISTING STEEL, PASSIVATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| BS EN 4692:2017 | Aerospace series. Tie Rod with integrated bolts. Locking clip |
| 16/30342183 DC : 0 | BS EN 8.3552 - AEROSPACE SERIES- SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, SPIRAL DRIVE RECESS, THREADED TO HEAD, IN HEAT AND CORROSION RESISTING STEEL, PASSIVATED - CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| 10/30227764 DC : 0 | BS EN 6115 - AEROSPACE SERIES - BOLT - PROTRUDING HEAD, SHORT THREAD - INCH SERIES |
| XP PREN 3711 : 1991 XP | AEROSPACE SERIES - WRENCH-DOUBLE ENDED, BI-HEXAGONAL STRAIGHT, CRANKED, OFFSET |
| XP PREN 3912 : 1997 XP | AEROSPACE SERIES - BOLTS, PAN HEAD, SIX LOBE RECESS, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C |
| XP PREN 4109 : 1998 XP | AEROSPACE SERIES - WRENCHES, FACE SPANNER |
| 14/30297290 DC : 0 | BS EN 4652-321 - AEROSPACE SERIES - CONNECTORS, COAXIAL, RADIO FREQUENCY - PART 321: TYPE 2, N INTERFACE - CRIMP VERSION - RIGHT ANGLE PLUG - PRODUCT STANDARD |
| 96/702221 DC : 0 | PREN 4224 - AEROSPACE SERIES - PIPE COUPLINGS 60 DEGREES; IN ANODIZED ALUMINIUM ALLOY; UNIONS FOR FLEXIBLE TUBES |
| BS EN 4536-2:2009 | Aerospace series. Bushes, plain in corrosion-resisting steel with self-lubricating liner, elevated load Dimensions and loads. Inch series |
| 12/30272549 DC : DRAFT SEP 2012 | BS EN 4013 - AEROSPACE SERIES - SHANK NUTS, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718), SILVER PLATED - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/600 DEGREES C |
| XP PREN 3853 : 1995 XP | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY TI-P64001 - STRAIGHT UNIONS, THREADED |
| XP PREN 3869 : 1995 XP | AEROSPACE SERIES - PIPE COUPLINGS, LOOSE FLANGES AND SEALS - SEALS IN FLUOROCARBON RUBBER AND ARMATURE IN ALUMINIUM ALLOY |
| I.S. EN 3382:2012 | AEROSPACE SERIES - RINGS RETAINING, INTERNAL, AXIAL MOUNTING, STEEL, PHOSPHATED |
| 11/30247472 DC : DRAFT MAY 2011 | BS EN 4710-003 - AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - SPRING CLAMP |
| XP PREN 3852 : 1995 XP | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY TI-P64001 - STRAIGHT UNIONS, WELDED, THREADED |
| XP PREN 4121 : 1994 XP | AEROSPACE SERIES - SHANK NUTS, SERRATED, SELF-LOCKING, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED ON THREAD - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C |
| 09/30201403 DC : 0 | BS EN 3268 - AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - PRESSURE PLUGS |
| 11/30245736 DC : 0 | BS EN 3631 - AEROSPACE SERIES - FLUID FITTINGS, FLANGED, 90 DEGREE ELBOWED - SEALING BY O-RING FOR 0,8 MM THICK TUBES |
| BS EN 4537-2:2009 | Aerospace series. Bushes, flanged in corrosion-resisting steel with self-lubricating liner, elevated load Dimensions and loads. Inch series |
| 06/19970233 DC : 0 | BS EN 3373-10 - AEROSPACE SERIES - TERMINAL LUGS AND IN-LINE SPLICES FOR CRIMPING ON ELECTRICAL CONDUCTORS - PART 10: TERMINAL LUGS, RING SHAPED, TIN PLATED FOR CRIMPING ON COPPER CONDUCTORS, TEMPERATURE UP TO +150 DEGREE C FOR METRIC AND INCH STUD SERIES - PRODUCT STANDARD |
| BS EN 4127:2009 | Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated. Classification: 1100 MPa (at ambient temperature)/ 425 °C |
| XP PREN 3868 : 1995 XP | AEROSPACE SERIES - PIPE COUPLINGS, LOOSE FLANGES AND SEALS - FLANGE CONNECTORS, WELDED, IN TITANIUM ALLOY TI-P64001 |
| XP PREN 4108 : 1998 XP | AEROSPACE SERIES - WRENCHES, CROW FOOT, ATTACHMENT SOCKET, SOCKET DRIVE |
| BS EN 4813:2017 | Aerospace series. Flange couplings. Cap, in heat resisting steel. Inch series |
| XP PREN 3856 : 1995 XP | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY TI-P64001 - SWIVEL NUTS FOR THRUST WIRE |
| BS EN 3385:2012 | Aerospace series. Rings retaining, external, axial mounting, steel, vacuum cadmium plated |
| 12/30263855 DC : 0 | BS EN 4702-04 - AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - SPRING CLAMP |
| XP PREN 4009 : 1995 XP | AEROSPACE SERIES - BOLTS, DOUBLE HEXAGON HEAD, CLOSE TOLERANCE SHANK, MEDIUM LENGTH THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718) - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| 12/30263853 DC : 0 | BS EN 4702-03 - AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - STUD - QUICK-RELEASE AND LOCKING |
| 96/702209 DC : 0 | PREN 4140 - AEROSPACE SERIES - PIPE COUPLINGS 60 DEGREE; IN ANODIZED ALUMINIUM ALLOYS; STRAIGHT UNIONS |
| NF EN 2863 : 2010 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, 90 DEGREES CORNER, WITH COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| I.S. EN 2866:2009 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, ONE LUG, WITH COUNTERBORE, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1110 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| 14/30310862 DC : 0 | BS EN 4832 - AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING AND RING-LOCKED FITTING-REDUCER - INCH SERIES - TECHNICAL SPECIFICATION |
| XP PREN 4011 : 1993 XP | AEROSPACE SERIES - NUTS, BIHEXAGONAL, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), SILVER PLATED - CLASSIFICATION: 1 550 MPA (AT AMBIENT TEMPERATURE)/600 DEGREE C |
| XP PREN 4118 : 1994 XP | AEROSPACE SERIES - NUTS, BIHEXAGONAL, SELF-LOCKING, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED ON THREAD - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C |
| 01/709644 DC : 0 | PREN 4165-010 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 010: RACK AND PANEL REAR MOUNTED PLUG 2 AND 4 MODULES, SERIES 2 - PRODUCT STANDARD |
| I.S. EN 4539-003:2010 | AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER ELEVATED LOAD UNDER LOW OSCILLATIONS - WIDE SERIES - DIMENSIONS AND LOADS - PART 003: INCH SERIES WITH LOW FRICTION COEFFICIENT |
| I.S. EN 3435:2010 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, TWO LUG, REDUCED SERIES, WITH COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| 10/30233642 DC : 0 | BS EN 4701-003 - AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY THREADED RING - FLUSH CONTACTS - PART 003: SQUARE FLANGE RECEPTACLE - PRODUCT STANDARD |
| 09/30199116 DC : DRAFT JAN 2009 | BS EN 4184 - AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - ELBOWS 45 DEGREE, WELDED ENDS, DOUBLE |
| BS EN 4804:2017 | Aerospace series. Flange couplings. Swivel flange with 4 fastening holes, in nickel alloy. Inch series |
| XP PREN 2930 : 1993 XP | AEROSPACE SERIES - BOLTS WITH DOUBLE HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY), SILVER PLATED - CLASSIFICATION: 1 210 MPA/735 DEGREE C |
| 01/709636 DC : 0 | EN 4165-018 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES CELSIUS CONTINUOUS - PART 018: PROTECTIVE COVER FOR RECEPTACLE 2 OR 4 MODULES, SERIES 2 AND SERIES 3 - PRODUCT STANDARD |
| 15/30333205 DC : 0 | BS EN 3660-019 - AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 019: CABLE OUTLET, STYLE A, 45 DEGREE, UNSEALED, WITH CABLE TIE STRAIN RELIEF - PRODUCT STANDARD |
| 01/709632 DC : 0 | PREN 4165-019 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES CELSIUS CONTINUOUS - PART 019: PROTECTIVE COVER FOR PLUG, FOR 2 OR 4 MODULES SERIES 2 AND SERIES 3 - PRODUCT STANDARD |
| BS EN 4399:2008 | Aerospace series. Rings, threaded, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated |
| BS EN 4302:2008 | Aerospace series. Open ring insert tool, square drive |
| EN 4702-03:2017 | Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 03: Stud - quick-release and locking |
| BS EN 4075:2008 | Aerospace series. Screws, pan head, offset cruciform recess, threaded to head, in corrosion resisting steel, passivated. Classification: 490 MPa (at ambient temperature) / 425 °C |
| PREN 3083 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS 8 DEGREE 30 MINUTES IN TITANIUM ALLOY - UNIONS, BULKHEAD, LONG, WELDED, FOR REPAIR |
| NF EN 3542 : 1998 | AEROSPACE SERIES - INSERTS, SCREW THREAD, HELICAL COIL, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2801 (INCONEL X750) |
| DIN EN 2922:1997-02 (Draft) | AEROSPACE SERIES - NUTS, HEXAGON, PLAIN, REDUCED HEIGHT, REDUCED ACROSS FLATS, IN HEAT RESISTING STEEL, PASSIVATED, LEFT HAND THREAD - CLASSIFICATION: 600 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| 96/702213 DC : 0 | PREN 4144 - AEROSPACE SERIES - PIPE COUPLINGS 60 DEGREES; IN ANODIZED ALUMINIUM ALLOY; UNIONS, 4-WAY |
| PREN 2585 : DRAFT 2017 | AEROSPACE SERIES - BEARING, SPHERICAL PLAIN IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER - WIDE SERIES - ELEVATED LOAD AT AMBIENT TEMPERATURE - DIMENSIONS AND LOADS |
| PREN 2863 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, 90 DEGREES CORNER, WITH COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| I.S. EN 4355:2008 | AEROSPACE SERIES - SIX LOBE RECESS - DRIVERS, SOCKET |
| PREN 3270 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - BLANKING PLUGS WITH LOCKING RING |
| DIN EN 3434:1999-01 (Draft) | AEROSPACE SERIES - NUTS, HEXAGON, SLOTTED/CASTELLATED, SELF-LOCKING, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 4156 : 200P2 | AEROSPACE SERIES - ROD ENDS, WITH SELF-ALIGNING DOUBLE ROW BALL BEARINGS AND THREADED SHANK IN STEEL - INNER RING AND BALLS IN CORROSION RESISTING STEEL - DIMENSIONS AND LOADS INCH SERIES |
| 07/30165636 DC : 0 | BS EN 4636 - AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK HEAD, SIX LOBES RECESS, SHORT THREAD, IN TITANIUM ALLOY TI-P64001, WITH ALUMINIUM PIGMENTED COATING - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| NF EN 3227 : 2010 | AEROSPACE SERIES - NUTS, HEXAGONAL, PLAIN, NORMAL HEIGHT, NORMAL ACROSS FLATS, IN STEEL, CADMIUM PLATED, LEFT HAND THREAD - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 6067 : 200P2 | AEROSPACE SERIES - PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, DOUBLE ACTING, BUTTON HANDLE |
| PREN 4808 : DRAFT 2015 | AEROSPACE SERIES - FLANGE COUPLINGS - WELD COUPLING, 90 DEGREES ELBOW, IN NICKEL ALLOY - INCH SERIES |
| PREN 2648 : 200P2 | AEROSPACE SERIES - WASHERS, CONCAVE, IN ALLOY STEEL, CADMIUM PLATED |
| PREN 4502 : 200P1 | AEROSPACE SERIES - WASHERS, FLAT, FOR RIVETING, IN HEAT RESISTING STEEL FE-PA4901 (MULTIMET), INCH BASED SERIES |
| XP PREN 4110 : 1998 XP | AEROSPACE SERIES - WRENCHES, OPEN END, BOX |
| PREN 4652-320 : DRAFT 2016 | AEROSPACE SERIES - CONNECTORS, COAXIAL, RADIO FREQUENCY - PART 320: TYPE 3, N INTERFACE, CRIMP VERSION, STRAIGHT PLUG - PRODUCT STANDARD |
| PREN 4702-03 : DRAFT 2016 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS WITH NON METALLIC STUD FOR NON-STRUCTURAL APPLICATIONS - PART 03: STUD - QUICK-RELEASE AND LOCKING |
| PREN 6092 : 200P2 | AEROSPACE SERIES - RECEPTACLE, FLOATING, DOUBLE LUG |
| PREN 2868 : 200P1 | AEROSPACE SERIES - NUTS, HEXAGONAL, SLOTTED/CASTELLATED, NORMAL HEIGHT, NORMAL ACROSS FLATS, IN HEAT RESISTING STEEL, SILVER PLATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| PREN 4531-004 : 200P2 | AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY THREADED RING - FLUSH CONTACTS - PART 004: JAM NUT RECEPTACLE - PRODUCT STANDARD |
| PREN 4635 : 200P1 | AEROSPACE SERIES - SCREWS, 100 DEGREE COUNTERSUNK HEAD, SIX LOBES RECESS, SHORT THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718) - CLASSIFICATION: 1270 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C |
| UNI EN 3384 : 2012 | AEROSPACE SERIES - RINGS RETAINING, EXTERNAL, AXIAL MOUNTING, STEEL, PHOSPHATED |
| PREN 4509 : 200P1 | AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN TITANIUM ALLOY, ANODIZED, WITH ALUMINIUM PIGMENTED COATING - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 4710-06 : DRAFT 2014 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 06: STUD - QUICK-RELEASE AND LOCKING |
| PREN 4307 : 200P1 | AEROSPACE SERIES - SLEEVES, TUBULAR, FOR SHEAR SCREWS WITH FLUSH HEAD, IN CORROSION RESISTING STEEL, PASSIVATED, (0,50 MM WALL THICKNESS) |
| PREN 3229 : 200P1 | AEROSPACE SERIES - NUTS, HEXAGON, PLAIN, REDUCED HEIGHT, NORMAL ACROSS FLATS, IN STEEL, CADMIUM PLATED, LEFT HAND THREAD - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 3406 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREE NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 2117, ANODIZED OR CHROMATED, METRIC SERIES |
| PREN 3431 : 200P1 | AEROSPACE SERIES - NUTS, HEXAGONAL, SELF-LOCKING, WITH COUNTERBORE AND CAPTIVE WASHER, IN HEAT RESISTING STEEL, SILVER PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREE C |
| PREN 3383 : 200P1 | AEROSPACE SERIES - RINGS RETAINING, INTERNAL, AXIAL MOUNTING, STEEL, VACUUM CADMIUM PLATED |
| PREN 3401 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREE NORMAL COUNTERSUNK HEAD, IN ALUMINIUM ALLOY 7050, METRIC SERIES |
| PREN 3407 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREE NORMAL COUNTERSUNK HEAD, IN ALUMINIUM ALLOY 2117, ANODIZED OR CHROMATED, METRIC SERIES |
| PREN 3418 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREE NORMAL COUNTERSUNK HEAD, IN NICKEL BASE ALLOY NI-P11, CADMIUM PLATED - METRIC SERIES |
| PREN 3325 : 200P1 | AEROSPACE SERIES - BOLTS, T-HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL, FE-PM38 (FV535) - CLASSIFICATION: 1000 MPA/550 DEGREES C - UNPLATED |
| PREN 3370 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREES NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 7050, ANODIZED OR CHROMATED, INCH BASED SERIES |
| PREN 3397 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM ALLOY 7050, METRIC SERIES |
| PREN 3396 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREES NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 5056A, METRIC SERIES |
| PREN 3435 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, TWO LUG, REDUCED SERIES, WITH COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| PREN 3405 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREE NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 7050, ANODIZED OR CHROMATED, METRIC SERIES |
| PREN 3421 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREE COUNTERSUNK NORMAL HEAD, IN CORROSION RESISTING STEEL FE-PA11, PASSIVATED, METRIC SERIES |
| I.S. EN 3763:2010 | AEROSPACE SERIES - NUTS, HEXAGONAL, SELF-LOCKING, BALL SEAT, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 3240 : 200P2 | AEROSPACE SERIES - NUTS, SELF-LOCKING, CLIP, IN HEAT RESISTING STEEL FE-PA92HT (A286), UNCOATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 3269 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - BLIND FERRULES WITH DYNAMIC BEAM SEAL END |
| PREN 3706 : 200P1 | AEROSPACE SERIES - HEADLESS THREADED PLUGS CROSS RECESS, IN ALUMINIUM ALLOY 5086 |
| PREN 3653 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, SELF-ALIGNING, ONE LUG, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 3247 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - UNIONS, BULKHEAD, WELDED |
| PREN 3267 : 200P1 | AEROSPACE SERIES - WASHER, BULKHEAD IN TITANIUM ALLOY |
| PREN 3444 : 200P1 | AEROSPACE SERIES - BOLTS, LARGE BIHEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN HEAT RESISTING NICKEL BASE ALLOY, PASSIVATED - CLASSIFICATION: 1250 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C |
| PREN 3561 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30 MINUTES IN TITANIUM ALLOY - FERRULES WITH DYNAMIC BEAM SEAL END, WELDED AND REDUCED AT PIPE END |
| PREN 3410 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREE NORMAL COUNTERSUNK HEAD, IN ALUMINIUM 1050A, METRIC SERIES |
| PREN 3422 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, UNIVERSAL HEAD, IN TITANIUM TI-P02, ANODIZED, METRIC SERIES |
| PREN 3687 : 200P1 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL, FE-PA92HT (A286), SILVER PLATED - CLASSIFICATION: 1100 MPA/650 DEGREES C |
| PREN 3660-019 : 200P1 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 019: CABLE OUTLET, STYLE A, 45 DEGREES, UNSEALED, WITH CABLE TIE STRAIN RELIEF - PRODUCT STANDARD |
| NF EN 4499 : 2009 | AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK REDUCED HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, WITH ALUMINIUM PIGMENTED COATING - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 3690 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - UNIONS, BULKHEAD, LONG |
| PREN 3393 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREES NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 2117, METRIC SERIES |
| PREN 3414 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, UNIVERSAL HEAD, IN CORROSION RESISTING STEEL FE-PA92HT, PASSIVATED, METRIC SERIES |
| PREN 4123 : 200P1 | AEROSPACE SERIES - SHANK NUTS, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718), SILVER PLATED ON THREAD - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/600 DEGREES C |
| PREN 4133 : 200P1 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN TITANIUM ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREE C |
| PREN 4134 : 200P1 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1250 MPA (AT AMBIENT TEMPERATURE)/425 DEGREE C |
| PREN 4110 : 200P1 | AEROSPACE SERIES - WRENCHES, OPEN END, BOX |
| NF EN 2865 : 2010 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, TWO LUGS, WITH COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| I.S. EN 3373-011:2009 | AEROSPACE SERIES - TERMINAL LUGS AND IN-LINE SPLICES FOR CRIMPING ON ELECTRIC CONDUCTORS - PART 011: TERMINAL LUGS, RING SHAPED, NICKEL PLATED, FOR CRIMPING ON COPPER CONDUCTORS, TEMPERATURE UP TO 260 DEGREES C FOR METRIC AND INCH STUD SERIES - PRODUCT STANDARD |
| I.S. EN 4692:2017 | AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - LOCKING CLIP |
| I.S. EN 4691-1:2017 | AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - PART 1: TECHNICAL SPECIFICATION |
| I.S. EN 4165-024:2017 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 024: SINGLE MODULE PLUG - PRODUCT STANDARD |
| I.S. EN 3417:2012 | AEROSPACE SERIES - RIVETS, SOLID, UNIVERSAL HEAD, IN NICKEL BASE ALLOY NI-P11, METRIC SERIES |
| I.S. EN 4710-04:2015 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 04: SPRING CLAMP - ONE WAY TOLERANCE COMPENSATION |
| BS EN 3383:2012 | Aerospace series. Rings retaining, internal, axial mounting,steel, vacuum cadmium plated |
| I.S. EN 2862:2009 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, 90 DEGREE CORNER, WITH COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| I.S. EN 4641-104:2010 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 104: SEMI-LOOSE, RUGGEDIZED DUPLEX CONSTRUCTION 62,5/125 [MU]M GI FIBRE NOMINAL, 4,95 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| I.S. EN 4634:2009 | AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK HEAD, SIX LOBE RECESS, SHORT THREAD, IN HEAT RESISTING STEEL FE-PA2601 (A286), PASSIVATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| I.S. EN 4309:2016 | AEROSPACE SERIES - NUTS, HEXAGON, SELF-LOCKING BY PLASTIC RING, NORMAL HEIGHT, NORMAL ACROSS FLATS, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/120 DEGREE C |
| NF EN 4645-004 : 2010 | AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY THREADED RING, SELF-LOCKING 1,25 MM DIAMETER FERRULE WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 004: JAM NUT RECEPTACLE - PRODUCT STANDARD |
| EN 2585:2001 | Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Wide series - Elevated load at ambient temperature - Dimensions and loads |
| I.S. EN 3660-018:2009 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 018: CABLE OUTLET, STYLE A, 90 DEGREES, UNSEALED, WITH CABLE TIE STRAIN RELIEF - PRODUCT STANDARD |
| I.S. EN 3914:2008 | AEROSPACE SERIES - INSERT, THIN WALL, SELF-LOCKING, LONG, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (NI-P100HT, INCONEL 718), SILVER PLATED ON INTERNAL THREAD, FOR SALVAGE OF COMPONENTS |
| I.S. EN 4078:2009 | AEROSPACE SERIES - INSERTS, THREADED, THIN WALL, LOCKED AND SELF-LOCKING, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| I.S. EN 4073:2016 | AEROSPACE SERIES - SCREWS, PAN HEAD, HEXALOBULAR RECESS, COARSE TOLERANCE SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| I.S. EN 4124:2005 | AEROSPACE SERIES - SHANK NUTS, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH1302 (WASPALOY), SILVER PLATED ON THREAD, FOR 60 DEGREE SWAGE - CLASSIFICATION: 1210 MPA (AT AMBIENT TEMPERATURE)/730 DEGREE CELSIUS |
| I.S. EN 6092:2016 | AEROSPACE SERIES - RECEPTACLE, FLOATING, DOUBLE LUG |
| BS EN 2944:1998 | Inserts, screw thread, helical coil, self-locking, in corrosion resisting steel FE-PA3004 |
| BS EN 4124:2004 | Aerospace series. Shank nuts, self-locking, heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated on thread, for 60° swage. Classification. 1 210 MPa (at ambient temperature) / 730°C |
| I.S. EN 4652-321:2017 | AEROSPACE SERIES - CONNECTORS, COAXIAL, RADIO FREQUENCY - PART 321: TYPE 3, N INTERFACE - CRIMP ASSEMBLY VERSION - RIGHT ANGLE PLUG - PRODUCT STANDARD |
| I.S. EN 4710-03:2015 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 03: SPRING CLAMP |
| DIN EN 3542:1998-07 | AEROSPACE SERIES - INSERTS, SCREW THREAD, HELICAL COIL, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2801 (INCONEL X750) |
| UNI EN 4531-004 : 2012 | AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY TRIPLE START THREADED RING - FLUSH CONTACTS - PART 004: JAM NUT RECEPTACLE - PRODUCT STANDARD |
| UNI EN 4538-003 : 2011 | AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER ELEVATED LOAD UNDER LOW OSCILLATIONS - NARROW SERIES - DIMENSIONS AND LOADS - PART 003: INCH SERIES WITH LOW FRICTION COEFFICIENT |
| I.S. EN 4673-006:2010 | AEROSPACE SERIES - INSERTS, UNJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS - PART 006: IN HEAT RESISTING STEEL FE-PA2601 (A286), MOS[2] COATED |
| NF EN 4074 : 2010 | AEROSPACE SERIES - SCREWS, PAN HEAD, SIX LOBE RECESS COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN TITANIUM ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| EN 4702-04:2017 | Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 04: Spring clamp |
| UNI EN 4641-301 : 2012 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 301: TIGHT STRUCTURE 50/125 [MU]M GI FIBRE NOMINAL 1,8 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| NF EN 4132 : 2010 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| NF EN 4071 : 2010 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| NF EN 3763 : 2010 | AEROSPACE SERIES - NUTS, HEXAGONAL, SELF-LOCKING, BALL SEAT, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| UNI EN 2852 : 2011 | AEROSPACE SERIES - NUTS, HEXAGONAL, PLAIN, NORMAL HEIGHT, NORMAL ACROSS FLATS, HEAT RESISTING STEEL PASSIVATED - CLASSIFICATION: 1100 MPA/650 DEGREES C |
| EN 4652-222:2017 | Aerospace series - Connectors, coaxial, radio frequency - Part 222: Type 2, TNC interface - Crimp version - Square flange receptacle - Product standard |
| UNI EN 3227 : 2011 | AEROSPACE SERIES - NUTS, HEXAGONAL, PLAIN, NORMAL HEIGHT, NORMAL ACROSS FLATS, IN STEEL, CADMIUM PLATED, LEFT HAND THREAD - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| I.S. EN 4614:2009 | AEROSPACE SERIES - SPHERICAL PLAIN BEARINGS IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, WIDE SERIES - DIMENSIONS AND LOADS - INCH SERIES |
| NF EN 3712 : 2008 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, ONE LUG, FIXED, REDUCED SERIES, WITH COUNTERBORE, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| EN 6128:2017 | Aerospace series - Blind bolt, 100° flush head, high strength |
| EN 4695:2017 | Aerospace series - Tie Rod with integrated bolts - Assembly Code G, H and K |
| I.S. EN 4123:2005 | AEROSPACE SERIES - SHANK NUTS, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (INCONEL 718), SILVER PLATED ON THREAD - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/600 DEGREE CELSIUS |
| NF EN 2944 : 1998 | AEROSPACE SERIES - INSERTS, SCREW THREAD, HELICAL COIL, SELF-LOCKING, IN CORROSION RESISTING STEEL FE-PA3004 |
| EN 4692:2017 | Aerospace series - Tie Rod with integrated bolts -Locking clip |
| I.S. EN 2944:1998 | AEROSPACE SERIES - INSERTS, SCREW THREAD, HELICAL COIL, SELF-LOCKING, IN CORROSION RESISTING STEEL FE-PA3004 |
| I.S. EN 4199-003:2014 | AEROSPACE SERIES - BONDING STRAPS FOR AIRCRAFT - PART 003: BONDING STRAP ASSEMBLIES WITH FLAT BRAIDED CONDUCTOR COPPER, TIN PLATED -65 DEGREES C UP TO 150 DEGREES C AND COPPER, NICKEL PLATED -65 DEGREES C UP TO 260 DEGREES C - PRODUCT STANDARD |
| I.S. EN 4131:2009 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN HEAT RESISTING NICKEL BASE ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1250 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| I.S. EN 4302:2008 | AEROSPACE SERIES - OPEN RING INSERT TOOL, SQUARE DRIVE |
| DIN EN 2926:1996-04 | AEROSPACE SERIES - BOLTS, DOUBLE HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C |
| DIN EN 3037:1996-11 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| DIN EN 3009:1998-07 | AEROSPACE SERIES - BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), SILVER PLATED - CLASSIFICATION: 1275 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| DIN EN 2651:1996-10 | AEROSPACE SERIES - SCREWS, PAN HEAD, SLOTTED, THREADED TO HEAD, IN BRASS, TIN PLATED - CLASSIFICATION: 380 MPA (AT AMBIENT TEMPERATURE)/80 DEGREES C |
| DIN EN 3035:1996-11 | AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| DIN EN 2929:1996-04 | AEROSPACE SERIES - BOLTS, DOUBLE HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY) - CLASSIFICATION: 1210 MPA (AT AMBIENT TEMPERATURE)/730 DEGREE C |
| DIN EN 3008:1998-07 | AEROSPACE SERIES - BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718) - CLASSIFICATION: 1275 MPA/650 DEGREES C |
| DIN EN 2644:1998-06 | AEROSPACE SERIES - ROD ASSEMBLIES FOR FLIGHT CONTROLS - TECHNICAL SPECIFICATION |
| DIN EN 3135:1996-04 | AEROSPACE SERIES - RIVETS, SOLID, UNIVERSAL HEAD, IN CORROSION RESISTING STEEL FE-PA11, PASSIVATED, INCH BASED SERIES |
| DIN EN 2809:2001-12 | AEROSPACE SERIES - NUTS, HEXAGON, SLOTTED/CASTELLATED, REDUCED HEIGHT, NORMAL ACROSS FLATS, IN HEAT RESISTING STEEL, SILVER PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| BS EN 3112:1995 | Bolts, normal hexagonal head, threaded to head, in alloy steel, cadmium plated. Classification: 900 MPa (at ambient temperature)/235°C |
| BS EN 2644:1998 | Rod assemblies for flight controls. Technical specification |
| BS EN 4556:2003 | Aerospace series. Pipe coupling 37°, in heat resisting steel. Cap assemblies. Inch series |
| BS EN 4017:2001 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Elbows 90° |
| BS EN 4198:2006 | Aerospace series. Rod-ends, adjustable self-aligning plain bearing with self-lubricating liner and threaded shank in corrosion resisting steel. Dimensions and loads |
| BS EN 3851:2003 | Aerospace series. Pipe couplings, 60°, spherical, in titanium alloy TI-P64001. Swivel nuts, straight |
| BS EN 4168:2004 | Aerospace series. Clips, spring tension, three parts. Outer clips in heat resisting steel FE-PA2601 (A286) |
| BS EN 2939:1994 | Screws, 100° countersunk head, offset cruciform recess, threaded to head in heat resisting steel FE-PA92HT (A286). Classification: 900 MPa (at ambient temperature)/650°C |
| BS EN 3063:1994 | Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy). Classification: 1210 MPa (at ambient temperature)/730°C |
| BS EN 4190:2001 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Tees, reduced with thrust wire nut on run |
| BS EN 3084:2001 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Unions, welded end threaded for repair |
| BS EN 4167:2004 | Aerospace series. Clips, spring tension, three parts. Inner clips in heat resisting steel FE-PA2601 (A286) |
| BS EN 2809:2001 | Aerospace series. Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, silver plated. Classification. 900 MPa (at ambient temperature)/650°C |
| BS EN 4322:2004 | Aerospace series. Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in titanium alloy TI-P64001, anodized, MoS<sub>2</sub> coated. Strength class: 1100 MPa (at ambient temperature) |
| BS EN 4012:2004 | Aerospace series. Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS<sub>2</sub> coated. Classification: 1 550 MPa (at ambient temperature) / 425°C |
| BS EN 3431:2007 | Aerospace series. Nuts, hexagonal, self-locking, with counterbore and captive washer, in heat resisting steel, silver plated. Classification: 1100 MPa (at ambient temperature)/425°C |
| BS EN 4552:2015 | Aerospace series. Pipe coupling 37°, spherical, in heat resisting steel. Straight nipples, welded end. Inch series |
| BS EN 4108:2006 | Aerospace series. Wrenches, crow foot, attachment socket, socket drive |
| BS EN 3721:1995 | Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel, FE-PA92HT (A 286), MoS<sub>2</sub> coated. Classification: 1100 MPa (at ambient temperature)/425°C |
| BS EN 2145:1993 | Rivets, solid, universal head, in aluminium alloy 2117, anodized or chromated, inch based series |
| BS EN 4531-003:2012 | Aerospace series. Connectors, optical, circular, single andmultipin, coupled by triple start threaded ring. Flushcontacts Square flange receptacle. Product standard |
| BS EN 4555:2003 | Aerospace series. Pipe coupling 37°, in heat resisting steel. Ferrules, welded end. Inch series |
| BS EN 4165-008:2007 | Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous Rack and panel plug for 2 and 4 modules, series 2. Product standard |
| BS EN 4498:2005 | Aerospace series. Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated, with aluminium pigmented coating. Classification: 1 550 MPa (at ambient temperature) / 315 °C |
| BS EN 4421:2007 | Aerospace series. Studs, in titanium alloy TI-P64001, MoS2 coated, with serrated locking ring in corrosion resisting steel. Strength class: 1100 MPa(at ambient temperature) |
| I.S. EN 4234:2015 | AEROSPACE SERIES - CLAMPS, WORM DRIVE - DIMENSIONS, MASSES |
| EN 4234:2015 | Aerospace series - Clamps, worm drive - Dimensions, masses |
| EN 4165-026:2015 | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 026: Accessories for single module connector - Product standard |
| EN 4078:2009 | Aerospace series - Inserts, threaded, thin wall, locked and self-locking, in heat resisting steel, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 °C |
| EN 2752:1989 | Aerospace series - Nuts, anchor, self locking fixed, two lug, reduced series, with counterbore - Classification : 1100 MPa/235 degree C |
| EN 3660-018:2009 | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 018: Cable outlet, style A, 90°, unsealed, with cable tie strain relief - Product standard |
| EN 4165-014:2005 | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 014: Shielded accessory body, 2 and 4 modules for connectors, series 2 and series 3 - Product standard |
| EN 4806:2017 | Aerospace series - Flange couplings - Weld coupling, straight, in nickel alloy - Inch series |
| EN 4710-07:2015 | Aerospace series - Quick release fastening systems for non-structural applications - Part 07: Retaining grommet |
| EN 3545-008:2006 | Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 C to 175 C - Part 008: Tools for assembly/removal of coding and attachment system - Product standard |
| EN 2869:2009 | Aerospace series - Nuts, hexagonal, slotted/castellated, normal height, normal accross flats, in heat resisting steel, passivated - Classification: 1 100 MPa (at ambient temperature) / 650 °C |
| EN 2935:1996 | Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1 210 MPa (at ambient temperature)/730°C |
| EN 4165-020:2007 | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 020: Coupling system keyway for receptacle - Product standard |
| EN 4497:2005 | Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature) / 315 °C |
| EN 3061:2007 | Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel, with flanged alignment housing - Dimensions and loads |
| EN 3832:2004 | Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1 550 MPa (at ambient temperature) / 650 °C |
| EN 3567-001:2001 | Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Part 001: Technical specification |
| EN 4175:2005 | Aerospace series - Collars, flanged swage locking, sheartype, in titanium TI-P99002, metric series |
| EN 2889:2006 | Aerospace series - Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C |
| EN 3239:1995 | Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated thread - Classification: 1 210 MPa (at ambient temperature) / 730 °C |
| EN 2914:1996 | Aerospace series - Washers, flat, large diameter, in heat resisting steel, passivated |
| EN 3855:2002 | Aerospace series - Pipe couplings, 60°, spherical in titanium alloy TI-P64001 - Caps |
| UNI EN 4023 : 2011 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30' IN TITANIUM ALLOY - ELBOWS 45 DEGREES |
| EN 4025:2010 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Elbows 45°, bulkhead |
| EN 4165-025:2017 | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 025: Single module receptacle - Product standard |
| UNI EN 3373-008 : 2012 | AEROSPACE SERIES - TERMINAL LUGS AND IN-LINE SPLICES FOR CRIMPING ON ELECTRIC CONDUCTORS - PART 008: COPPER LUGS NICKEL PLATED RING SHAPED FOR COPPER CONDUCTORS NICKEL PLATED FOR INCH SERIES STUDS UP TO 340 DEGREES C - PRODUCT STANDARD |
| EN 2927:1996 | Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1 275 MPa (at ambient temperature)/650 °C |
| EN 4011:2004 | Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1 550 MPa (at ambient temperature) / 600 °C |
| UNI EN 3264 : 2011 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - THRUST WIRE NUTS |
| UNI EN 4156 : 2014 | AEROSPACE SERIES - ROD ENDS, WITH SELF-ALIGNING DOUBLE ROW BALL BEARINGS AND THREADED SHANK IN STEEL - INNER RING AND BALLS IN CORROSION RESISTING STEEL - DIMENSIONS AND LOADS - INCH SERIES |
| UNI EN 4025 : 2011 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30' IN TITANIUM ALLOY - ELBOWS 45 DEGREES, BULKHEAD |
| EN 4801:2017 | Aerospace series - Flange couplings - Swivel flange with 3 fastening holes, in heat resisting steel - Inch series |
| EN 4805:2017 | Aerospace series - Flange couplings - Weld coupling, straight, in heat resisting steel - Inch series |
| UNI EN 4131 : 2013 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN HEAT RESISTING NICKEL BASE ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1250 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| EN 4165-027:2015 | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 027: Rack and panel rear mounted plug for 2 and 4 modules, series 3 - Product standard |
| EN 3303:1997 | Aerospace series - Screw, cap head, hexagon socket, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature)/235°C |
| EN 4165-008:2007 | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 008: Rack and panel plug for 2 and 4 modules, series 2 - Product standard |
| UNI EN 4266 : 2013 | AEROSPACE SERIES - BEARING SPHERICAL PLAIN, METAL TO METAL, IN CORROSION RESISTING STEEL, CADMIUM PLATED - WIDE SERIES - DIMENSIONS AND LOADS - INCH SERIES |
| UNI EN 2648 : 2014 | AEROSPACE SERIES - WASHERS, CONCAVE, IN ALLOY STEEL, CADMIUM PLATED |
| UNI EN 4265 : 2013 | AEROSPACE SERIES - BEARING SPHERICAL PLAIN, METAL TO METAL IN CORROSION RESISTING STEEL - WIDE SERIES - DIMENSIONS AND LOADS - INCH SERIES |
| I.S. EN 4613:2009 | AEROSPACE SERIES - SPHERICAL PLAIN BEARINGS IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, NARROW SERIES - DIMENSIONS AND LOADS - INCH SERIES |
| PREN 4641-106 : DRAFT 2017 | AEROSPACE SERIES - CABLES, OPTICAL, 125 [MU]M DIAMETER CLADDING - PART 106: SEMI-LOOSE STRUCTURE 62,5/125 [MU]M GI FIBRE NOMINAL 0,9 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| 13/30288692 DC : 0 | BS EN 4178 - AEROSPACE SERIES - SCREWS, PAN HEAD, SIX LOBE RECESS, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN TITANIUM ALLOY, ANODIZED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| 08/30185236 DC : DRAFT JULY 2008 | BS EN 4673-006 - AEROSPACE SERIES - INSERTS, UNJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS - PART 006: IN HEAT RESISTING STEEL FE-PA2601 (A286), MOS2 COATED |
| BS EN 4641-301:2011 | Aerospace series. Cables, optical 125 μm diameter cladding Tight structure 50/125 μm GI fibre nominal 1,8 mm outside diameter. Product standard |
| 13/30290575 DC : 0 | BS EN 4694 - AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - ASSEMBLY CODE D, E AND F |
| 15/30333206 DC : 0 | BS EN 3660-018 - AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 018: CABLE OUTLET, STYLE A, 90 DEGREE, UNSEALED, WITH CABLE TIE STRAIN RELIEF - PRODUCT STANDARD |
| 07/30167571 DC : 0 | BS EN 4645-004 - AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY THREADED RING, 1,25 MM DIA. - FERRULE WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 004: JAM NUT RECEPTACLE - PRODUCT STANDARD |
| BS EN 3155-001:2009 | Aerospace series. Electrical contacts used in elements of connection Technical specification |
| 12/30263857 DC : 0 | BS EN 4702-05 - AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - WASHER |
| NF EN 4539-003 : 2011 | AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER ELEVATED LOAD UNDER LOW OSCILLATIONS - WIDE SERIES - DIMENSIONS AND LOADS - PART 003: INCH SERIES WITH LOW FRICTION COEFFICIENT |
| BS ISO 22438:2018 | Aerospace series. Pipe coupling 8°30. in titanium alloy. Thrust wires |
| 96/702212 DC : 0 | PREN 4143 - AEROSPACE SERIES - PIPE COUPLINGS 60 DEGREES; IN ANODIZED ALUMINIUM ALLOY; CAP ASSEMBLY, FILTER |
| 14/30296344 DC : 0 | BS EN 3820 - AEROSPACE SERIES - METRIC BOLTS, NORMAL HEXAGON HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS[2] LUBRICATED - CLASSIFICATION; 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| 14/30297595 DC : 0 | BS EN 4165-015 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 015: ROUND CHIMNEY FOR ACCESSORY (1 PER MODULE CAVITY) - PRODUCT STANDARD |
| I.S. EN 4538-2:2014 | AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER ELEVATED LOAD UNDER LOW OSCILLATIONS - NARROW SERIES - DIMENSIONS AND LOADS - PART 2: INCH SERIES |
| BS EN 4126:2010 | Aerospace series. Nuts, anchor, self-locking, floating, two lug, reduced series, with incremental counterbore, in heat resisting steel, MoS2 lubricated. Classification: 900 MPa (at ambient temperature)/315°C |
| EN 4691-1:2017 | Aerospace series - Tie rod with integrated bolts - Part 1: Technical specification |
| BS EN 3753:2010 | Aerospace series. Nuts, anchor, self-locking, fixed, 60° corner, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/235°C |
| UNI EN 3417 : 2012 | AEROSPACE SERIES - RIVETS, SOLID, UNIVERSAL HEAD, IN NICKEL BASE ALLOY NI-P11, METRIC SERIES |
| BS EN 3229:2009 | Aerospace series. Nuts, hexagonal, plain, reduced height, normal across flats, in steel, cadmium plated, left hand thread. Classification: 900 MPa (at ambient temperature)/235°C |
| BS ISO 22437:2018 | Aerospace series. Pipe coupling 8°30 in titanium alloy. Nut for welded ferrule |
| 11/30254184 DC : 0 | BS EN 4652-212 - AEROSPACE SERIES - CONNECTORS, COAXIAL, RADIO FREQUENCY - PART 212: TYPE 2, TNC INTERFACE, CLAMP NUT ASSEMBLY VERSION, SQUARE FLANGE RECEPTACLE - PRODUCT STANDARD |
| BS EN 3660-018:2009 | Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors Cable outlet, style A, 90°, unsealed, with cable tie strain relief. Product standard |
| BS EN 3729:2008 | Aerospace series. Rings, threaded, self-locking, left-hand thread, in heat resisting steel FE-PA92HT (A286), silver plated |
| BS EN 4622:2010 | Aerospace series. Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting steel FE-PA2601 (A286), MoS2 coated |
| NF EN 3914 : 2008 | AEROSPACE SERIES - INSERT, THIN WALL, SELF-LOCKING, LONG, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (NI-P100HT, INCONEL 718), SILVER PLATED ON INTERNAL THREAD, FOR SALVAGE OF COMPONENTS |
| 06/30151475 DC : 0 | BS EN 4535-2 - AEROSPACE SERIES - BUSHES, FLANGED IN ALUMINIUM ALLOY WITH SELF-LUBRICATING LINER, ELEVATED LOAD - PART 2: DIMENSIONS AND LOADS - INCH SERIES |
| NF EN 4084 : 2010 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, TWO LUG, WITH COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| BS EN 4710-06:2015 | Aerospace series. Quick release fastening systems for non-structural applications Stud. Quick-release and locking |
| UNI EN 4443 : 2012 | AEROSPACE SERIES - NUTS, ELLIPTICAL CLINCH, SELF-LOCKING, MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286), MOS[2] COATED, CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| 14/30310865 DC : 0 | BS EN 4835 - AEROSPACE SERIES - INSTALLATION AND REMOVAL REQUIREMENTS FOR RING LOCKED FITTING AND REDUCER, 24 DEGREE CONE UP TO 35000 KPA (5080 PSI) - INCH SERIES |
| BS EN 4129:2009 | Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature) / 235°C |
| BS EN 4634:2009 | Aerospace series. Screws, 100° countersunk head, six lobe recess, short thread, in heat resisting steel FE-PA2601 (A286), passivated. Classification: 900 MPa (at ambient temperature)/650°C |
| 15/30331968 DC : 0 | BS PREN 6046 - AEROSPACE SERIES - BEARING SPHERICAL PLAIN METAL TO METAL IN CORROSION RESISTING STEEL - NARROW SERIES - DIMENSIONS AND LOADS - INCH SERIES |
| BS EN 4805:2017 | Aerospace series. Flange couplings. Weld coupling, straight, in heat resisting steel. Inch series |
| 09/30212012 DC : 0 | BS EN 2894 - AEROSPACE SERIES - NUTS, BIHEXAGONAL, SELF-LOCKING, WITH COUNTERBORE, IN HEAT RESISTING NICKEL BASE ALLOY, PASSIVATED, MOS2 LUBRICATED - CLASSIFICATION: 1550 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| 11/30247474 DC : DRAFT MAY 2011 | BS EN 4710-004 - AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - SPRING CLAMP - ONE WAY MOVABLE |
| 11/30254186 DC : 0 | BS EN 4652-411 - AEROSPACE SERIES - CONNECTORS, COAXIAL, RADIO FREQUENCY - PART 411: TYPE 4, C INTERFACE, CLAMP NUT ASSEMBLY VERSION - RIGHT ANGLE PLUG - PRODUCT STANDARD |
| BS EN 4165-025:2017 | Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuous Single module receptacle. Product standard |
| 13/30290108 DC : 0 | BS EN 4128 - AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN HEAT RESISTING NICKEL BASE ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1250 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| NF EN 3539 : 2010 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, ONE LUG, FIXED, WITH COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| 11/30247209 DC : 0 | BS EN 3087 - AEROSPACE SERIES - CLAMPBLOCK - TECHNICAL SPECIFICATION |
| BS EN 4072:2016 | Aerospace series. Screws, 100° countersunk normal head, offset cruciform recess, close tolerance shank, short thread in titanium alloy, aluminium IVD coated. Classification: 1 100 MPa (at ambient temperature) / 425 °C |
| BS EN 4538-2:2014 | Aerospace series. Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations. Narrow series. Dimensions and loads Inch series |
| BS EN 2879:2017 | Aerospace series. Nuts, anchor, self-locking, air resistant, sealing, floating, two lug, with counterbore, in corrosion resisting steel, passivated, MoS2 lubricated. Classification: 900 MPa (at ambient temperature) / 235 °C |
| 08/30163836 DC : 0 | BS EN 4538-003 - AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF LUBRICATING LINER - ELEVATED LOAD UNDER LOW OSCILLATIONS - NARROW SERIES - DIMENSIONS AND LOADS - PART 003: INCH SERIES WITH LOW FRICTION COEFFICIENT |
| BS EN 4645-003:2009 | Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder Square flange receptacle. Product standard |
| 07/30167568 DC : 0 | BS EN 4645-003 - AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY THREADED RING, 1,25 MM DIAMETER - FERRULE WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 003 - SQUARE FLANGE RECEPTACLE - PRODUCT STANDARD |
| 96/702222 DC : 0 | PREN 4225 - AEROSPACE SERIES - PIPE COUPLINGS 60 DEGREES; IN ANODIZED ALUMINIUM ALLOY; PLUGS FOR TAPER UNION |
| 96/702216 DC : 0 | PREN 4147 - AEROSPACE SERIES - PIPE COUPLINGS 60 DEGREES; IN ANODIZED ALUMINIUM ALLOY; UNIONS, ELBOW 90 DEGREES |
| 05/30141100 DC : 0 | EN 4622 - AEROSPACE SERIES - INSERTS, MJ THREADS, SELF-LOCKING, WITH SELF-BROACHING KEYS, IN HEAT RESISTING STEEL FE-PA2601 (A286), MOS[2] |
| 11/30247480 DC : DRAFT MAY 2011 | BS EN 4710-006 - AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - STUD - QUICK-RELEASE AND LOCKING |
| BS EN 4499:2009 | Aerospace series. Screws, 100° countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating. Classification: 1100 MPa (at ambient temperature) / 315 °C |
| 08/30195582 DC : 0 | BS EN 3264 - AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY -THRUST WIRE NUTS |
| NF EN 4125 : 2010 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, TWO LUG, REDUCED SERIES, WITH INCREMENTAL COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| I.S. EN 3384:2012 | AEROSPACE SERIES - RINGS RETAINING, EXTERNAL, AXIAL MOUNTING, STEEL, PHOSPHATED |
| BS EN 4538-003:2010 | Aerospace series. Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations. Narrow series. Dimensions and loads Inch series with low friction coefficient |
| BS EN 4635:2009 | Aerospace series. Screws, 100° countersunk head, six lobes recess, short thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification: 1270 MPa (at ambient temperature) / 650 °C |
| 13/30290264 DC : 0 | BS EN 4163 - AEROSPACE SERIES - SCREWS 100 DEGREES COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN ALLOY STEEL, CADMIUM PLATED - 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| 04/30033330 DC : DRAFT JUL 2004 | EN 4234 - AEROSPACE SERIES - CLAMPS - WORM DRIVE - DIMENSION AND MASS |
| BS EN 4641-105:2010 | Aerospace series. Cables, optical 125 μm diameter cladding Semi-loose, ruggedized quadraxial construction 62,5/125 μm GI fibre nominal, 5,72 mm outside diameter. Product standard |
| 13/30290082 DC : 0 | BS EN 4072 - AEROSPACE SERIES - SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| BS EN 4084:2009 | Aerospace series. Nuts, anchor, self-locking, fixed, two lug, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature) / 235°C |
| BS EN 3768:2012 | Aerospace series. Nuts. anchor, self-locking, one lug, fixed, reduced series, with counterbore, in heat resisting steel, MoS2lubricated. Classification: 1 100 MPa (at ambient temperature)/315 °C |
| I.S. EN 6094:2016 | AEROSPACE SERIES - WASHER, SPRING, COUNTERSUNK |
| 00/717166 DC : DRAFT NOV 2000 | PREN 4056-001 - AEROSPACE SERIES - CABLE TIES FOR HARNESSES - PART 001: TECHNICAL SPECIFICATION |
| 12/30260906 DC : 0 | BS EN 4711 - AEROSPACE SERIES - SCREW, 12-POINT FLANGE HEAD (BI HEXAGONAL HEAD BOLT), LONG THREAD, FOR TENSILE APPLICATIONS, CONTINUOUS FIBRE REINFORCED-PEEK COMPOSITE, TEMPERATURE RANGE -65 DEGREES C TO 135 DEGREES C - INCH SERIES |
| I.S. EN 4135:2009 | AEROSPACE SERIES - BOLTS, NORMAL BI-HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN TITANIUM ALLOY, ANODIZED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| 17/30366495 DC : 0 | BS EN 4165-018 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 018: PROTECTIVE COVER FOR ALL RECEPTACLES SERIES 2 - PRODUCT STANDARD |
| 13/30283195 DC : 0 | BS EN 4652-001 - AEROSPACE SERIES - CONNECTORS, COAXIAL, RADIOFREQUENCY - PART 001: TECHNICAL SPECIFICATION |
| 09/30205296 DC : 0 | BS EN 4165-026 - AEROSPACE SERIES - CONNECTOR, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURES 175 DEGREE C CONTINUOUS - PART 026: SHIELDED ACCESSORIES FOR SINGLE MODULE |
| BS EN 4199-003:2014 | Aerospace series. Bonding straps for aircraft Bonding strap assemblies with flat braided conductor copper, tin plated - 65°C up to 150°C and copper, nickel plated - 65°C up to 260°C. Product standard |
| BS EN 4135:2009 | Aerospace series. Bolts, normal bi-hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315°C |
| UNI EN 4641-103 : 2012 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 103: SEMI-LOOSE, RUGGEDIZED SIMPLEX CONSTRUCTION 62,5/125 [MU]M GI FIBRE NOMINAL 2,74 MM, OUTSIDE DIAMETER - PRODUCT STANDARD |
| BS EN 4493:2008 | Aerospace series. Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH1801 (NIP96HT, Nimonic 90), silver plated |
| 14/30297694 DC : 0 | BS EN 4652-420 - AEROSPACE SERIES - CONNECTORS, COAXIAL, RADIO FREQUENCY - PART 420: TYPE 4, C INTERFACE, CRIMP ASSEMBLY VERSION, STRAIGHT PLUG - PRODUCT STANDARD |
| BS EN 3660-017:2009 | Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors Cable outlet, style A, straight, unsealed, with cable tie strain relief. Product standard |
| BS EN 4133:2009 | Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in titanium alloy, aluminium IVD coated. Classification: 1100 MPa (at ambient temperature) / 425 °C |
| 13/30280646 DC : 0 | BS EN 4165-026 - AEROSPACE SERIES - CONNECTOR, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURES 175 DEGREES C CONTINUOUS - PART 026: SHEILDED ACCESSORIES FOR SINGLE MODULE - PRODUCT STANDARD |
| BS EN 6094:2016 | Aerospace series. Washer, spring, countersunk |
| XP PREN 3855 : 1995 XP | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY TI-P64001 - CAPS |
| XP PREN 3710 : 1991 XP | AEROSPACE SERIES - SOCKETS, BI-HEXAGONAL - TECHNICAL SPECIFICATION |
| PREN 3542 : DRAFT 2017 | AEROSPACE SERIES - INSERTS, SCREW THREAD, HELICAL COIL, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2801 (INCONEL X750) |
| XP PREN 4122 : 1994 XP | AEROSPACE SERIES - SHANK NUTS, SELF-LOCKING, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED ON THREAD - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C |
| XP PREN 3857 : 1995 XP | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY TI-P64001 - ELBOWS 90 DEGREES, WELDED |
| BS EN 3903:2017 | Aerospace series. Washers, laminated, in corrosion resisting steel |
| BS EN 4808:2017 | Aerospace series. Flange couplings. Weld coupling, 90° elbow, in nickel alloy. Inch series |
| 13/30281165 DC : 0 | BS EN 4165-027 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART X27: RACK AND PANEL REAR MOUNTED PLUG FOR 2 AND 4 MODULES, SERIES 3 - PRODUCT STANDARD |
| 16/30354035 DC : 0 | BS EN 4854-2 - AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, LOW STARTING TORQUE AND LOW FRICTION COEFFICIENT, ELEVATED DUTY CYCLES UNDER LOW OSCILLATIONS AT DIFFERENT OPERATING CONDITIONS, WIDE SERIES - DIMENSIONS AND LOADS |
| BS EN 4162:2016 | Aerospace series. Screws 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification: 1 100 MPa (at ambient temperature) / 235 °C |
| 06/30146177 DC : 0 | EN 3373-011 - AEROSPACE SERIES - TERMINAL LUGS AND IN-LINE SPLICES FOR CRIMPING ON ELECTRIC CONDUCTORS - PART 011: TERMINAL LUGS, RING SHAPED, NICKEL PLATED, FOR CRIMPING ON COPPER CONDUCTORS, TEMPERATURE UP TO +260 DEGREE C FOR METRIC AND INCH STUD SERIES - PRODUCT STANDARD |
| BS EN 4130:2009 | Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated. Classification: 1100 MPa (at ambient temperature) / 425 °C |
| BS EN 4710-07:2015 | Aerospace series. Quick release fastening systems for non-structural applications Retaining grommet |
| BS EN 3631:2014 | Aerospace series. Fluid fittings, flanged, 90° elbowed. Sealing by O-ring for 0,8 mm thick tubes |
| 01/709652 DC : DRAFT JUN 2001 | PREN 4165-014 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES CELSIUS CONTINUOUS - PART 014: SHIELDED ACCESSORY BODY, 2 OR 4 MODULES, FOR CONNECTORS SERIES 2 AND SERIES 3 - PRODUCT STANDARD |
| 11/30247479 DC : DRAFT MAY 2011 | BS EN 4710-005 - AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - SPRING CLAMP - TWO WAYS MOVABLE |
| BS EN 4693:2017 | Aerospace series. Tie rod with integrated bolts. Assembly code A, B and C |
| 13/30278621 DC : 0 | BS EN 4165-001 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
| BS EN 3914:2008 | Aerospace series. Insert, thin wall, self-locking, long, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT, Inconel 718), silver plated on internal thread, for salvage of components |
| 16/30346081 DC : 0 | BS EN 4510 - AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREE, SPHERICAL IN TITANIUM ALLOY TIP64001 - ADAPTERS, STRAIGHT, DOUBLE END, WITH LOCKING RING |
| 01/709635 DC : 0 | PREN 4165-008 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES CELSIUS CONTINUOUS - PART 008: RACK AND PANEL PLUG FOR 2 OR 4 MODULES, SERIES 2 - PRODUCT STANDARD |
| BS EN 3613:2009 | Aerospace series. Bolts, normal hexagonal head, relieved shank, long thread, in heat resisting nickel base alloy NIPH2601 (Inconel 718), silver plated. Classification: 1275 MPa/650 °C |
| I.S. EN 3229:2009 | AEROSPACE SERIES - NUTS, HEXAGONAL, PLAIN, REDUCED HEIGHT, NORMAL ACROSS FLATS, IN STEEL, CADMIUM PLATED, LEFT HAND THREAD - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| NF EN 3034 : 2009 | AEROSPACE SERIES - NUTS, SELF-LOCKING, HEXAGONAL WITH CAPTIVE WASHER IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER COATED - CLASSIFICATION: 1100 MPA/425 DEGREES C |
| 13/30294327 DC : 0 | BS EN 4652-222 - AEROSPACE SERIES - CONNECTORS, COAXIAL, RADIO FREQUENCY - PART 222: TYPE 2, TNC INTERFACE, CRIMP VERSION - STRAIGHT SQUARE FLANGE RECEPTACLE - PRODUCT STANDARD |
| XP PREN 4119 : 1994 XP | AEROSPACE SERIES - NUTS, BIHEXAGONAL, SELF-LOCKING, DEEP COUNTERBORED, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED ON THREAD - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C |
| NF EN 2883 : 2010 | AEROSPACE SERIES - NUTS, HEXAGONAL, SELF-LOCKING, WITH COUNTERBORE AND CAPTIVE WASHER, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| XP PREN 4124 : 1994 XP | AEROSPACE SERIES - SHANK NUTS, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY), SILVER PLATED ON THREAD, FOR 60 DEGREE SWAGE - CLASSIFICATION: 1 210 MPA (AT AMBIENT TEMPERATURE)/730 DEGREE C |
| 13/30294324 DC : 0 | BS EN 4652-221 - AEROSPACE SERIES - CONNECTORS, COAXIAL, RADIO FREQUENCY - PART 221: TYPE 2 CRIMP VERSION - TNC INTERFACE, RIGHT ANGLE PLUG - PRODUCT STANDARD |
| 01/709625 DC : 0 | PREN 4165-006 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 006: PLUG FOR 2 OR 4 MODULES, SERIES 2 - PRODUCT STANDARD |
| NF EN 2866 : 2010 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, ONE LUG, WITH COUNTERBORE, IN STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1110 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 2584 : DRAFT 2017 | AEROSPACE SERIES - BEARING, SPHERICAL PLAIN IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER - NARROW SERIES - ELEVATED LOAD AT AMBIENT TEMPERATURE - DIMENSIONS AND LOADS |
| XP PREN 2936 : 1993 XP | AEROSPACE SERIES - BOLTS T-HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY) SILVER PLATED - CLASSIFICATION: 1210 MPA/730 DEGREE C |
| XP PREN 2933 : 1993 XP | AEROSPACE SERIES - BOLTS T-HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCO 718) UNPLATED - CLASSIFICATION: 1275 MPA/650 DEGREE C |
| PREN 3143 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREES COUNTERSUNK NORMAL HEAD, IN NICKEL BASE ALLOY NI-P11, CADMIUM PLATED, INCH BASED SERIES |
| XP PREN 2929 : 1993 XP | AEROSPACE SERIES - BOLTS WITH DOUBLE HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P101HT (WASPALOY) - CLASSIFICATION: 1 210 MPA/735 DEGREE C |
| XP PREN 2934 : 1993 XP | AEROSPACE SERIES - BOLTS T-HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCO 718) SILVER PLATED - CLASSIFICATION: 1275 MPA/650 DEGREE C |
| DIN EN 3740:1996-11 | AEROSPACE SERIES - BOLTS, SHOULDERED, THIN HEXAGONAL HEAD, CLOSE TOLERANCE SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| NF EN 4614 : 2009 | AEROSPACE SERIES - SPHERICAL PLAIN BEARINGS IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, WIDE SERIES - DIMENSIONS AND LOADS - INCH SERIES |
| BS EN 3724:2004 | Bolts, double hexagon head, relieved shank, long thread, in titanium alloy TI-P64001, MoS<sub>2</sub> coated. Strength class: 1100 MPa (at ambient temperature) |
| BS EN 4131:2009 | Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in heat resisting nickel base alloy, aluminium IVD coated. Classification: 1250 MPa (at ambient temperature) / 425 °C |
| BS EN 3660-019:2009 | Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors Cable outlet, style A, 45°, unsealed, with cable tie strain relief. Product standard |
| NF EN 4640-004 : 2008 | AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, RACK AND PANEL, MULTICONTACT, 1,25 DIAMETER FERRULE, WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 004: RECEPTACLE OPTICAL CONNECTOR - PRODUCT STANDARD |
| NF EN 4078 : 2010 | AEROSPACE SERIES - INSERTS, THREADED, THIN WALL, LOCKED AND SELF-LOCKING, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 4124 : 200P1 | AEROSPACE SERIES - SHANK NUTS, SELF-LOCKING, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH1302 (WASPALOY), SILVER PLATED ON THREAD, FOR 60 DEGREES SWAGE - CLASSIFICATION: 1210 MPA (AT AMBIENT TEMPERATURE)/730 DEGREES C |
| PREN 4538-1 : 200P1 | AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER - ELEVATED LOAD UNDER LOW OSCILLATIONS - NARROW SERIES - DIMENSIONS AND LOADS - METRIC SERIES |
| PREN 2138 : 1997 | AEROSPACE SERIES - WASHERS, FLAT, IN STEEL, CADMIUM PLATED |
| PREN 4538-2 : 200P1 | AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER - ELEVATED LOAD UNDER LOW OSCILLATIONS - NARROW SERIES - DIMENSIONS AND LOADS - INCH SERIES |
| 06/30150689 DC : 0 | BS EN 4018 - AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30 MINUTES IN TITANIUM ALLOY - ELBOWS 90 DEGREE, SWIVEL NUT |
| PREN 4486 : 200P1 | AEROSPACE SERIES - STEEL BALLS |
| BS EN 3244:2001 | Aerospace Series. Pipe coupling 8°30\' in titanium alloy. Unions, double ended |
| PREN 4252 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, 90 DEGREES CORNER, REDUCED SERIES WITH COUNTERBORE, IN HEAT RESISTING STEEL, SILVER PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 6138 : DRAFT 2014 CORR 14 | AEROSPACE SERIES - CAPS, PROTECTIVE, NON-METALLIC FOR FLARED AND FLARELESS FITTING ENDS, FOR FLUID SYSTEMS WITH <= 3000 PSI (21000 KPA) WORKING PRESSURE |
| BS EN 4640-003:2008 | Aerospace series. Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder Plug optical connector. Product standard |
| PREN 4355 : 200P1 | AEROSPACE SERIES - SIX LOBE RECESS - DRIVERS, SOCKET |
| PREN 4165-010 : 200P1 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREE C CONTINUOUS - PART 010: RACK AND PANEL REAR MOUNTED PLUG FOR 2 AND 4 MODULES, SERIES 2 - PRODUCT STANDARD |
| PREN 4165-018 : 200P2 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 018: PROTECTIVE COVER FOR ALL RECEPTACLES SERIES 2 - PRODUCT STANDARD |
| PREN 4652-420 : 1ED 2015 | AEROSPACE SERIES - CONNECTORS, COAXIAL, RADIO FREQUENCY - PART 420: TYPE 4, C INTERFACE - CRIMP ASSEMBLY VERSION - STRAIGHT PLUG - PRODUCT STANDARD |
| PREN 4256 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, TWO LUG, REDUCED SERIES WITH COUNTERBORE, IN HEAT RESISTING STEEL, SILVER PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 6097 : DRAFT 2018 | AEROSPACE SERIES - BEARING, SPHERICAL PLAIN, METAL TO METAL, EXTRA WIDE INNER RING IN CORROSION RESISTING STEEL - DIMENSIONS AND LOADS - INCH SERIES |
| PREN 4802 : DRAFT 2015 | AEROSPACE SERIES - FLANGE COUPLINGS - SWIVEL FLANGE WITH 3 FASTENING HOLES, IN NICKEL ALLOY - INCH SERIES |
| PREN 4402 : 200P1 | AEROSPACE SERIES - LOCKBOLTS, 100 DEGREES COUNTERSUNK NORMAL HEAD, SHEARTYPE, CLOSE TOLERANCE, IN TITANIUM ALLOY TI-P64001, WITH ALUMINIUM PIGMENTED COATING, METRIC SERIES - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 4809 : DRAFT 2015 | AEROSPACE SERIES - FLANGE COUPLINGS - GASKET SEAL WITH FLUOROCARBON SEAL ON ALUMINIUM PLATE WITH 3 FASTENING HOLES - INCH SERIES |
| PREN 4641-200 : DRAFT 2017 | AEROSPACE SERIES - CABLES, OPTICAL, 125 [MU]M DIAMETER CLADDING - PART 200: SEMI-LOOSE STRUCTURE 9/125 [MU]M GI FIBRE NOMINAL 0,9 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| UNI EN 4531-003 : 2012 | AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY TRIPLE START THREADED RING - FLUSH CONTACTS - PART 003: SQUARE FLANGE RECEPTACLE - PRODUCT STANDARD |
| NF EN 4136 : 2010 | AEROSPACE SERIES - BOLTS, NORMAL BI-HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 2889 : 1 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 2873 : 200P2 | AEROSPACE SERIES - BOLTS, LARGE BIHEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED UNDER VACUUM - CLASSIFICATION: 1 550 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 3386 : 200P1 | AEROSPACE SERIES - RINGS RETAINING, RADIAL MOUNTING, STEEL, PHOSPHATED |
| PREN 3415 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREE COUNTERSUNK NORMAL HEAD, IN CORROSION RESISTING STEEL FE-PA92HT, PASSIVATED, METRIC SERIES |
| PREN 3424 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, UNIVERSAL HEAD, IN TITANIUM ALLOY TI 45,5 CB, METRIC SERIES |
| PREN 3630 : 200P1 | AEROSPACE SERIES - FLUID FITTINGS, FLANGED, STRAIGHT - SEALING BY O-RING FOR 0,8 MM THICK TUBES |
| PREN 3691 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - UNIONS, BULKHEAD, LONG, WELDED |
| PREN 3391 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM ALLOY 2117, METRIC SERIES |
| PREN 3420 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, UNIVERSAL HEAD, IN CORROSION RESISTING STEEL FE-PA11, PASSIVATED, METRIC SERIES |
| PREN 3408 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREE NORMAL COUNTERSUNK HEAD, IN ALUMINIUM ALLOY 2017A, METRIC SERIES |
| PREN 3537 : 200P1 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, TWO LUG, WITH COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| PREN 3400 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREE NORMAL COUNTERSUNK HEAD, IN ALUMINIUM ALLOY 5056A, ANODIZED OR CHROMATED, METRIC SERIES |
| PREN 3413 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREE NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 7050, METRIC SERIES |
| PREN 3395 : 200P1 | AEROSPACE SERIES - RIVETS, SOLID, 100 DEGREES NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 2017A, METRIC SERIES |
| PREN 3293 : 200P1 | AEROSPACE SERIES - BOLT, T-HEAD, CLOSE TOLERANCE MEDIUM THREAD LENGTH IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), UNCOATED - CLASSIFICATION: 1275 MPA/650 DEGREES C |
| PREN 3324 : 200P1 | AEROSPACE SERIES - BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL FE-PM38 (FV535) - CLASSIFICATION: 1000 MPA/550 DEGREES C - UNPLATED |
| NF EN 3660-018 : 2009 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 018: CABLE OUTLET, STYLE A, 90 DEGREES, UNSEALED, WITH CABLE TIE STRAIN RELIEF - PRODUCT STANDARD |
| PREN 4056-001 : 200P2 | AEROSPACE SERIES - CABLE TIES FOR HARNESSES - PART 001: TECHNICAL SPECIFICATION |
| PREN 3913 : 200P1 | AEROSPACE SERIES - INSERT, THIN WALL, SELF-LOCKING, SHORT, IN HEAT RESISTING NICKEL BASE ALLOY NI-PH2601 (NI-P100HT, INCONEL 718), SILVER PLATED ON INTERNAL THREAD, FOR SALVAGE OF COMPONENTS |
| PREN 4561 : 200P1 | AEROSPACE SERIES - PIPE COUPLING, WELDED, IN HEAT RESISTING STEEL - ELBOW 90 DEGREES - INCH SERIES |
| PREN 3726 : 200P1 | AEROSPACE SERIES - NUTS, SELF LOCKING, CLIP, IN HEAT RESISTING STEEL FE-PA92HT (A286), MOS[2] COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREES C |
| PREN 3730 : 200P1 | AEROSPACE SERIES - CLAMPS, SADDLE FIXED AND SLIDING VERSION IN ALUMINIUM ALLOY WITH RUBBER CUSHIONING - DIMENSIONS, MASSES |
| PREN 3751 : 200P3 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, CLOSED CORNER, REDUCED SERIES, WITH COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| PREN 3767 : 200P1 | AEROSPACE SERIES - RIVETS, BLIND, NUT PLATE, 100 DEGREES COUNTERSUNK HEAD, IN HEAT RESISTING STEEL, PASSIVATED, METRIC SERIES |
| PREN 3788 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES - PROTECTIVE CAPS |
| PREN 3843 : 200P2 | AEROSPACE SERIES - NUTS, BIHEXAGONAL, SELF-LOCKING, WITH COUNTERBORE, IN HEAT RESISTING STEEL, PASSIVATED - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| ASD-STAN prEN 4157 P1:1996 | AEROSPACE SERIES - ROD ENDS, WITH SELF-ALIGNING DOUBLE ROW BALL BEARINGS AND THREADED SHANK IN STEEL - DIMENSIONS AND LOADS - INCH SERIES |
| PREN 3869 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS, LOOSE FLANGES AND SEALS - SEALS IN FLUOROCARBON RUBBER AND ARMATURE IN ALUMINIUM ALLOY |
| PREN 4174 : 200P1 | AEROSPACE SERIES - COLLARS, SWAGE LOCKING, SHEARTYPE, IN ALUMINIUM ALLOY 2024, ANODIZED OR CHROMATED, METRIC SERIES |
| PREN 4188 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - ELBOWS 90 DEGREE, BULKHEAD, LONG, WELDED |
| PREN 4641-103 : 200P1 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 103: SEMI-LOOSE, RUGGEDIZED SIMPLEX CONSTRUCTION 62,5/125 [MU]M GI FIBRE NOMINAL 2,74 MM, OUTSIDE DIAMETER - PRODUCT STANDARD |
| PREN 4539-1 : 200P1 | AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER - ELEVATED LOAD UNDER LOW OSCILLATIONS - WIDE SERIES - DIMENSIONS AND LOADS - METRIC SERIES |
| PREN 4073 : 200P2 | AEROSPACE SERIES - SCREWS, PAN HEAD, SIX LOBE RECESS, COARSE TOLERANCE SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| PREN 4121 : 200P2 | AEROSPACE SERIES - SHANK NUTS, SERRATED, SELF-LOCKING, IN HEAT RESISTING STEEL FE-PA2601 (A286), SILVER PLATED ON THREAD - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C |
| PREN 4018 : 200P2 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - ELBOWS 90 DEGREES WITH THRUST WIRE NUT |
| PREN 4129 : 200P1 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREE C |
| PREN 4137 : 200P1 | AEROSPACE SERIES - BOLTS, NORMAL BI-HEXAGONAL HEAD, STEPPED SHANK, LONG THREAD, IN TITANIUM ALLOY, ANODIZED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| PREN 4191 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - TEES, REDUCED, BULKHEAD BRANCH, LONG |
| PREN 4183 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - ELBOWS 90 DEGREE, DOUBLE, WELDED |
| PREN 4131 : 200P1 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN HEAT RESISTING NICKEL BASE ALLOY, ALUMINIUM IVD COATED - CLASSIFICATION: 1250 MPA (AT AMBIENT TEMPERATURE)/425 DEGREE C |
| PREN 4173 : 200P1 | AEROSPACE SERIES - LOCKBOLTS, 100 DEGREE COUNTERSUNK NORMAL HEAD, SHEARTYPE, CLOSE TOLERANCE, IN TITANIUM ALLOY TI-P64001, ANODIZED, METRIC SERIES - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| PREN 4187 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30' IN TITANIUM ALLOY - ELBOWS 90 DEGREE, BULKHEAD, LONG |
| PREN 4641-100 : 200P1 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 100: TIGHT STRUCTURE 62,5/125 [MU]M CORE GI FIBRE 1,8 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| PREN 4639-003 : 200P1 | AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, MODULAR, MULTICONTACT, 1,25 DIAMETER FERRULE, WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 003: MALE OPTICAL MODULE - PRODUCT STANDARD |
| I.S. EN 3386:2012 | AEROSPACE SERIES - RINGS RETAINING, RADIAL MOUNTING, STEEL, PHOSPHATED |
| PREN 3857 : 200P1 | AEROSPACE SERIES - PIPE COUPLINGS, 60 DEGREES, SPHERICAL, IN TITANIUM ALLOY TI-P64001 - ELBOWS 90 DEGREES, WELDED |
| PREN 4639-004 : 200P1 | AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, MODULAR, MULTICONTACT, 1,25 DIAMETER FERRULE, WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 004: FEMALE OPTICAL MODULE - PRODUCT STANDARD |
| ARINC 810-5 : 2015 | DEFINITION OF STANDARD INTERFACES FOR GALLEY INSERT (GAIN) EQUIPMENT PHYSICAL INTERFACES |
| UNI EN 3537 : 2011 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, TWO LUG, WITH COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| I.S. EN 2865:2009 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, TWO LUGS, WITH COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| I.S. EN 4122:2005 | AEROSPACE SERIES - SHANK NUTS, SELF-LOCKING, IN HEAT RESISTING STEEL FE-PA2601 (A286), SILVER PLATED ON THREAD - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C |
| I.S. EN 4811:2017 | AEROSPACE SERIES - FLANGE COUPLINGS - GASKET SEAL WITH FLUOROCARBON SEAL ON ALUMINIUM PLATE WITH 4 FASTENING HOLES - INCH SERIES |
| I.S. EN 4694:2017 | AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - ASSEMBLY CODE D, E AND F |
| I.S. EN 3660-017:2009 | AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 017: CABLE OUTLET, STYLE A, STRAIGHT, UNSEALED, WITH CABLE TIE STRAIN RELIEF - PRODUCT STANDARD |
| ONORM EN 4035 : 2006 | AEROSPACE SERIES - ROD ENDS, ADJUSTABLE WITH SELF-ALIGNING DOUBLE ROW BALL BEARING IN CORROSION RESISTING STEEL, REDUCED INTERNAL RADIAL CLEARANCE AND THREADED SHANK IN TITANIUM ALLOY - DIMENSIONS AND LOADS |
| I.S. EN 4156:2013 | AEROSPACE SERIES - ROD ENDS, WITH SELFALIGNING DOUBLE ROW BALL BEARINGS AND THREADED SHANK IN STEEL - INNER RING AND BALLS IN CORROSION RESISTING STEEL - DIMENSIONS AND LOADS - INCH SERIES |
| I.S. EN 3155-001:2016 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 001: TECHNICAL SPECIFICATION |
| I.S. EN 4805:2017 | AEROSPACE SERIES - FLANGE COUPLINGS - WELD COUPLING, STRAIGHT, IN HEAT RESISTING STEEL - INCH SERIES |
| I.S. EN 2883:2009 | AEROSPACE SERIES - NUTS, HEXAGONAL, SELF-LOCKING, WITH COUNTERBORE AND CAPTIVE WASHER, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| NF EN 3033 : 2008 | AEROSPACE SERIES - NUTS, SELF-LOCKING, HEXAGONAL WITH CAPTIVE WASHER, IN HEAT RESISTING STEEL FE-PA2601 (A286), UNCOATED - CLASSIFICATION: 1100 MPA/425 DEGREES C |
| I.S. EN 3728:2008 | AEROSPACE SERIES - SHAFT-NUTS, SELF-LOCKING, LEFT-HAND THREAD, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED |
| I.S. EN 4534-2:2016 | AEROSPACE SERIES - BUSHES, PLAIN IN ALUMINIUM ALLOY WITH SELF-LUBRICATING LINER, ELEVATED LOAD - PART 2: DIMENSIONS AND LOADS - INCH SERIES |
| NF EN 3834 : 2010 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FLOATING, TWO LUG, INCREMENTAL COUNTERBORE, IN CORROSION RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 900 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| I.S. EN 4702-04:2017 | AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 04: SPRING CLAMP |
| I.S. EN 6138:2017 | AEROSPACE SERIES - CAP, PROTECTIVE, NON-METALLIC FOR FITTING ENDS <= 3000 PSI HYDRAULIC SYSTEMS |
| I.S. EN 4165-027:2015 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 027: RACK AND PANEL REAR MOUNTED PLUG FOR 2 AND 4 MODULES, SERIES 3 - PRODUCT STANDARD |
| NF EN 3843 : 2011 | AEROSPACE SERIES - NUTS, BIHEXAGONAL, SELF-LOCKING, WITH COUNTERBORE, IN HEAT RESISTING STEEL, PASSIVATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| BS EN 4652-222:2017 | Aerospace series. Connectors, coaxial, radio frequency Type 2, TNC interface. Crimp version. Square flange receptacle. Product standard |
| EN 4710-03:2015 | Aerospace series - Quick release fastening systems for non-structural applications - Part 03: Spring clamp |
| BS EN 4652-321:2017 | Aerospace series. Connectors, coaxial, radio frequency Type 3, N interface. Crimp assembly version. Right angle plug. Product standard |
| I.S. EN 4801:2017 | AEROSPACE SERIES - FLANGE COUPLINGS - SWIVEL FLANGE WITH 3 FASTENING HOLES, IN HEAT RESISTING STEEL - INCH SERIES |
| NF EN 2585 : 2002 | AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER - WIDE SERIES - ELEVATED LOADS AT AMBIENT TEMPERATURE - DIMENSIONS AND LOADS |
| NF EN 4122 : 2005 | AEROSPACE SERIES - SHANK NUTS, SELF-LOCKING, IN HEAT RESISTING STEEL FE-PA2601 (A286), SILVER PLATED ON THREAD - CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/650 DEGREES C |
| BS EN 3904:2017 | Aerospace series. Washers, wire locking in aluminium alloy, anodized |
| BS EN 3278:2012 | Aerospace series. Sleeves, tubular, protruding head, in corrosion resisting steel, passivated (0,25 mm wall thickness) |
| I.S. EN 3706:2012 | AEROSPACE SERIES - HEADLESS THREADED PLUGS, CROSS RECESS, IN ALUMINIUM ALLOY 5086 |
| I.S. EN 3753:2010 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, 60 DEGREES CORNER, WITH COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| I.S. EN 3729:2008 | AEROSPACE SERIES - RINGS, THREADED, SELF-LOCKING, LEFT-HAND THREAD, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED |
| EN 4652-320:2017 | Aerospace series - Connectors, coaxial, radio frequency - Part 320: Type 3, N interface - Crimp version - Straight plug - Product standard |
| EN 4710-01:2015 | Aerospace series - Quick release fastening systems for non-structural applications - Part 01: Technical specification |
| I.S. EN 2863:2010 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, 90 DEGREE CORNER, WITH COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREE C |
| I.S. EN 4136:2009 | AEROSPACE SERIES - BOLTS, NORMAL BI-HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, LONG THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| EN 4693:2017 | Aerospace series - Tie rod with integrated bolts - Assembly code A, B and C |
| I.S. EN 3226:2009 | NUTS, HEXAGON, PLAIN, NORMAL HEIGHT, NORMAL ACROSS FLATS, STEEL, CADMIUM PLATED - CLASSIFICATION 1100 MPA/235 DEGREES C |
| I.S. EN 4640-003:2008 | AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, RACK AND PANEL, MULTICONTACT, 1,25 DIAMETER FERRULE, WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 003: PLUG OPTICAL CONNECTOR - PRODUCT STANDARD |
| I.S. EN 3373-010:2009 | AEROSPACE SERIES - TERMINAL LUGS AND IN-LINE SPLICES FOR CRIMPING ON ELECTRIC CONDUCTORS - PART 010: TERMINAL LUGS, RING SHAPED, TIN PLATED, FOR CRIMPING ON COPPER CONDUCTORS, TEMPERATURE UP TO 150 DEGREES C FOR METRIC AND INCH STUD SERIES - PRODUCT STANDARD |
| I.S. EN 4138:2016 | AEROSPACE SERIES - SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| I.S. EN 6069:2009 | AEROSPACE SERIES - RIVET, 100 DEGREE REDUCED FLUSH HEAD, CLOSE TOLERANCE - INCH SERIES |
| I.S. EN 3033:2008 | AEROSPACE SERIES - NUTS, SELF-LOCKING, HEXAGONAL WITH CAPTIVE WASHER, IN HEAT RESISTING STEEL FE-PA2601 (A286), UNCOATED - CLASSIFICATION: 1100 MPA/425 DEGREES C |
| I.S. EN 4641-105:2010 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 105: SEMI-LOOSE, RUGGEDIZED QUADRAXIAL CONSTRUCTION 62,5/125 [MU]M GI FIBRE NOMINAL, 5,72 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| I.S. EN 3323:2009 | AEROSPACE SERIES - BOLTS WITH DOUBLE HEXAGON HEAD, RELIEVED SHANK LONG THREAD, - IN HEAT RESISTING STEEL FE-PM 38 (FV 535) - CLASSIFICATION: 1000 MPA/550 DEGREES C |
| I.S. EN 4396:2008 | AEROSPACE SERIES - SHAFT-NUTS, SELF-LOCKING, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED |
| I.S. EN 3724:2005 | AEROSPACE SERIES - BOLTS, DOUBLE HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN TITANIUM ALLOY TI-P64001, MOS[2] COATED - STRENGTH CLASS: 1100 MPA (AT AMBIENT TEMPERATURE) |
| I.S. EN 3538:2010 | AEROSPACE SERIES - NUTS, ANCHOR, SELF-LOCKING, FIXED, TWO LUG, REDUCED SERIES, WITH COUNTERBORE, IN HEAT RESISTING STEEL, MOS[2] LUBRICATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/315 DEGREES C |
| I.S. EN 3327:2008 | AEROSPACE SERIES - BOLTS, DOUBLE HEXAGON HEAD, CLOSE TOLERANCE, MEDIUM THREAD LENGTH, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), UNCOATED - CLASSIFICATION: 1275 MPA/650 DEGREE C |
| I.S. EN 4127:2009 | AEROSPACE SERIES - BOLTS, NORMAL HEXAGONAL HEAD, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ALUMINIUM 4D COATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/425 DEGREE C |
| DIN EN 2934:1996-05 | AEROSPACE SERIES - BOLTS, T-HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING NICKEL BASE ALLOY NI-P100HT (INCONEL 718), SILVER PLATED - CLASSIFICATION: 1275 MPA (AT AMBIENT TEMPERATURE)/650 DEGREE C |
| DIN EN 3012:1995-11 | AEROSPACE SERIES - NUTS, BIHEXAGONAL, SELF-LOCKING, IN RESISTING NICKEL BASSE ALLOY NI-9101HT (WASPALOY) - CLASSIFICATION: 1210 MPA (AT AMBIENT TEMPERATURE)/730 DEGREES C |
| BS EN 3243:2001 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Ferrule, welded, with dynamic beam seal end |
| PREN 6081 : 200P2 | AEROSPACE SERIES - RIVET, UNIVERSAL HEAD, CLOSE TOLERANCE - INCH SERIES |
| BS EN 3080:2006 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Tees, reduced, branch with thrust wire nut |
| BS EN 4175:2005 | Aerospace series. Collars, flanged swage locking, sheartype, in titanium TI-P99002, metric series |
| BS EN 4026:2001 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Tees |
| BS EN 3012:1996 | Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy). Classification: 1210 MPa (at ambient temperature)/730°C |
| BS EN 3240:2007 | Aerospace series. Nuts, self-locking, clip, in heat resisting steel FE-PA2601 (A286), uncoated. Classification: 1100 MPa (at ambient temperature)/425°C |
| BS EN 3082:2001 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Unions, bulkhead welded, for repair |
| BS EN 4121:2015 | Aerospace series. Shank nuts, serrated, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread. Classification: 1 100 MPa (at ambient temperature) / 650 °C |
| BS EN 3645-001:2015 | Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175°C or 200°C continuous Technical specification |
| BS EN 3138:2001 | Aerospace series. Rivets, solid 100° countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based series |
| BS EN 3006:1994 | Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286). Classification: 900 MPa (at ambient temperature)/650°C |
| 11/30242263 DC : 0 | BS EN 4691-001 - AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - TECHNICAL SPECIFICATION |
| BS EN 4590:2005 | Aerospace series. Retainers, spring, sheet metal, for self-locking barrel nuts, in corrosion resisting steel, passivated |
| BS EN 3740:1997 | Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS<sub>2</sub> lubricated. Classification: 1100 MPa (at ambient temperature)/315°C |
| BS EN 3151:1995 | Dowels, plain, in heat resisting nickel base alloy NI-P100HT (Inconel 718) |
| BS EN 3008:1998 | Bolts, hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718). Classification:1275 MPa (at ambient temperature)/650°C |
| BS EN 4165-009:2007 | Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous Rack and panel plug for 2 and 4 modules, series 3. Product standard |
| BS EN 4165-012:2005 | Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuous Flange mounting receptacle 2 or 4 modules, series 3. Product standard |
| BS EN 4114:2001 | Aerospace series. Clamps, loop (\'P\' type) in aluminium alloy with rubber cushioning. Dimensions and masses |
| BS EN 4402:2006 | Aerospace series. Lockbolts, 100° countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001,with aluminium pigmented coating, metric series. Classification: 1100 MPa (at ambient temperature) / 315°C |
| BS EN 4639-004:2007 | Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder Female optical module. Product standard |
| BS EN 4009:2004 | Aerospace series. Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification: 1550 MPa (at ambient temperature) |
| BS EN 4182:2001 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Tees, reduced |
| BS EN 2647:2006 | Aerospace series. Nuts, hexagonal, self-locking, ball seat, in alloy steel, cadmium plated, MoS<sub>2</sub> lubricated. Classification: 900 MPa (at ambient temperature) / 235°C |
| BS EN 4025:2010 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Elbows 45°, bulkhead |
| PREN 6101 : 200P2 | AEROSPACE SERIES - RIVET, 100 DEGREES MEDIUM FLUSH HEAD, CLOSE TOLERANCE - INCH SERIES |
| BS EN 3867:2004 | Aerospace series. Pipe couplings, loose flanges and seals. Flanges in titanium alloy TI-P64001 |
| BS EN 2556:1993 | Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 5056A, anodized or chromated, inch based series |
| BS EN 4020:2009 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Elbows 90°, welded end with thrust wire nut |
| BS EN 3730:2009 | Aerospace series. Clamps, saddle fixed and sliding version in aluminium alloy with rubber cushioning. Dimension, masses |
| BS EN 4183:2001 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Elbows 90° welded ends |
| BS EN 2680:2006 | Aerospace series. Nuts, anchor, self-locking, floating, self-aligning, two lug, in alloy steel, cadmium plated, MoS<sub>2</sub> lubricated. Classification: 900 MPa (at ambient temperature) / 235°C |
| BS EN 4116:2004 | Aerospace series. Nuts, hexagonal, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread. Classification: 1100 MPa (at ambient temperature) / 425°C |
| BS EN 4551:2014 | Aerospace series. Pipe coupling, 37°, in heat resisting steel. Swivel nuts. Inch series |
| BS EN 4304:2005 | Aerospace series. Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness) |
| BS EN 4165-014:2005 | Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuous Shielded accessory body, 2 and 4 modules for connectors, series 2 and series 3. Product standard |
| BS EN 3696:2001 | Aerospace series. Washers in heat resisting steel |
| BS EN 4165-016:2005 | Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous Double oval chimney for accessory (1 per 2 modules). Product standard |
| BS EN 2887:1995 | Bolts, normal hexagonal head, threaded to head, in corrosion resisting steel, passivated. Classification: 600 MPa (at ambient temperature)/425°C |
| BS EN 4024:2009 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Elbows 45° welded end with thrust wire nut |
| BS EN 4022:2001 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Elbows 90°, bulkhead, welded end |
| BS EN 4321:2004 | Aerospace series. Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated. Classification. 1 550 Mpa (at ambient temperature)/650°C |
| BS EN 3150:1995 | Pins, shoulder, headless, in heat resisting nickel base alloy NI-P100HT (Inconel 718) |
| BS EN 3566:2001 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Adaptor with lockring |
| BS EN 3266:2001 | Aerospace series. Pipe coupling in titanium alloy. Bulkhead nut |
| BS EN 4165-018:2015 | Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuous Protective cover for all receptacles series 2. Product standard |
| BS EN 2925:1994 | Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A 286). Classification: 900 MPa (at ambient temperature)/650°C |
| BS EN 6129:2016 | Aerospace series. Blind bolt, protruding head, high strength, pulltype |
| BS EN 3048:2001 | Bearings, spherical plain in corrosion resisting steel with self-lubricating liner. Light series. Elevated load at ambient temperature. Dimensions and loads |
| BS EN 2912:1996 | Washers, flat, large diameter, in aluminium alloy, anodized or chromated |
| BS EN 3857:2002 | Aerospace series. Pipe couplings, 60°, spherical, in titanium alloy TI-P64001. Elbows 90°, welded |
| BS EN 6101:2016 | Aerospace series. Rivet, 100° medium flush head, close tolerance. Inch series |
| BS EN 3690:2001 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Unions, bulkhead, long |
| BS EN 3868:2004 | Aerospace series. Pipe couplings, loose flanges and seals. Flange connectors, welded, in titanium alloy TI-P64001 |
| BS EN 4118:2004 | Aerospace series. Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread. Classification: 1100 MPa (at ambient temperature) / 650°C |
| BS EN 4165-011:2007 | Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous Flange mounting receptacle 2 and 4 modules, series 2. Product standard |
| BS EN 2550:1993 | Rivets, solid 100° normal countersunk head, in aluminium 1050A, inch based series |
| BS EN 3820:2017 | Aerospace series. Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated. Classification: 1 100 MPa (at ambient temperature)/315 °C |
| BS EN 4119:2004 | Aerospace series. Nuts, bihexagonal, self-locking, deep counterbore, in heat resisting steel FE-PA2601 (A286), silver plated on thread. Classification: 1100 MPa (at ambient temperature) / 650°C |
| BS EN 3264:2010 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Thrust wire nuts |
| BS EN 4509:2006 | Screws, 100° countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating, metric series. Classification: 1100 MPa (at ambient temperature)/315°C |
| BS EN 2881:2006 | Aerospace series. Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug, with counterbore, in corrosion resisting steel, passivated, MoS<sub>2</sub> lubricated. Classification: 900 MPa (at ambient temperature) / 120°C |
| BS EN 3726:2004 | Aerospace series. Nuts, self-locking, clip, in heat resisting steel FE-PA2601 (A286), MoS<sub>2</sub> coated. Classification: 1100 MPa (at ambient temperature)/425°C |
| BS EN 4023:2010 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Elbows 45° |
| BS EN 3239:1996 | Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated thread. Classification: 1210 MPa (at ambient temperature)/730°C |
| BS EN 4172:2006 | Aerospace series. Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series. Classification: 1 100 MPa (at ambient temperature) / 315°C |
| BS EN 4557:2003 | Aerospace series. Pipe coupling 37°, spherical, in heat resisting steel. Tees nipples, welded end. Inch series |
| BS EN 3788:2001 | Aerospace series. Pipe coupling 8°30\'. Protective caps |
| BS EN 4185:2001 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Tees, bulkhead on run long |
| BS EN 4032:2001 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Thrust wire |
| BS EN 4401:2006 | Aerospace series. Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series. Classification: 1100 MPa (at ambient temperature) / 315°C |
| BS EN 4496:2005 | Aerospace series. Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating. Classification: 1100 MPa (at ambient temperature) / 315 °C |
| BS EN 4591:2005 | Aerospace series. Nuts, barrel, self-locking, floating, self-aligning,in heat resisting nickel base alloy, MoS<sub>2</sub> lubricated. Classification: 15 50 MPa (at ambient temperature) / 315°C |
| BS EN 4035:2006 | Aerospace series. Rod ends, adjustable with self-aligning double row ball bearing in corrosion resisting steel, reduced internal radial clearance and threaded shank in titanium alloy. Dimensions and loads |
| BS EN 4040:2006 | Aerospace series. Bearings, spherical plain in corrosion resisting steel with self-lubricating liner with wide inner ring. Elevated loads at ambient temperature. Dimensions and loads |
| BS EN 2551:1993 | Rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2117, inch based series |
| BS EN 3722:1995 | Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A 286), MoS<sub>2</sub> coated. Classification: 1100 MPa (at ambient temperature)/425°C |
| BS EN 4356:2006 | Aerospace series. Six lobe recess. Drivers, short |
| BS EN 4531-004:2012 | Aerospace series. Connectors, optical, circular, single and multipin, coupled by triple start threaded ring. Flushcontacts Jam nut receptacle. Product standard |
| BS EN 3567-001:2001 | Aerospace series. In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B Technical specification |
| BS EN 2752:1990 | Specification for nuts, anchor, self locking fixed, two lug, reduced series, with counterbore. Classification: 1100 MPa/235°C |
| BS EN 4553:2003 | Aerospace series. Pipe coupling 37°, spherical, in heat resisting steel. Elbow 90° nipples, welded end. Inch series |
| BS EN 4120:2004 | Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated on thread. Classification: 1210 MPa (at ambient temperature) / 730°C |
| BS EN 2856:2006 | Aerospace series. Nuts, anchor, self-locking, fixed, closed corner, reduced series, with counterbore. Classification: 1100 MPa/235°C |
| BS EN 6080:2016 | Aerospace series. Rivet, 100° normal flush head, close tolerance. Inch series |
| BS EN 4186:2001 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Unions, cross |
| BS EN 2144:1993 | Rivets, solid, universal head, in aluminium alloy 2117, inch based series |
| BS EN 4194:2001 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Tees, reduced, bulkhead |
| BS EN 3688:2001 | Aerospace series. T-ring fillers in titanium alloy for welded pipes. 14000 kPa nominal pressure |
| BS EN 4165-017:2005 | Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175°C continuous Blank chimney for accessory (1 per module cavity). Product standard |
| BS EN 4110:2006 | Aerospace series. Wrenches, open end, box |
| BS EN 2907:1996 | Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated. Classification: 1 100 MPa (at ambient temperature)/650°C |
| BS EN 4639-003:2007 | Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder Male optical module. Product standard |
| BS EN 3246:2001 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Unions, bulkhead |
| BS EN 2146:1993 | Rivets, solid, universal head, in aluminium alloy 2017A, inch based series |
| BS EN 3059:2007 | Aerospace series. Bearings, airframe rolling. Rigid single row ball bearings in steel with flanged alignment housing, cadmium plated. Dimensions and loads |
| BS EN 3230:2001 | Aerospace series. Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in steel, cadmium plated. Classificaiton: 900 MPa (at ambient temperature)/235°C |
| BS EN 4563:2003 | Aerospace series. Pipe coupling, welded, in heat resisting steel. Tees. Inch series |
| BS EN 4030:2001 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Tees bulkhead on run |
| BS EN 2910:1994 | Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286). Classification: 1100 MPa (at ambient temperature)/650°C |
| BS EN 4357:2006 | Aerospace series. Six lobe recess. Drivers, handle |
| BS EN 4031:2001 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Nut for welded union |
| BS EN 3245:2001 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Unions, reducer |
| BS EN 4495:2006 | Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series. Classification: 1100 MPa (at ambient temperature) / 315°C |
| BS EN 3853:2002 | Aerospace series. Pipe couplings, 60°, spherical, in titanium alloy TI-P64001. Straight unions, threaded |
| BS EN 3913:2007 | Aerospace series. Insert, thin wall, self-locking, short, in heat resisting nickel base alloy NI-PH2601 (Ni-P100HT, Inconel 718), silver plated on internal thread, for salvage of components |
| BS EN 2810:2001 | Aerospace series. Nuts, hexagon, slotted/castellated, reduced height, normal across flats, in heat resisting steel, passivated. Classification: 900 MPa (at ambient temperature)/650°C |
| BS EN 4056-001:2015 | Aerospace series. Cable ties for harnesses Technical specification |
| BS EN 4018:2009 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Elbows 90° with thrust wire nut |
| BS EN 3083:2001 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Unions, bulkhead, long welded end, for repair |
| PREN 6069 : 200P3 | AEROSPACE SERIES - RIVET, 100 DEGREES REDUCED FLUSH HEAD, CLOSE TOLERANCE - INCH SERIES |
| BS EN 6081:2016 | Aerospace series. Rivet, universal head, close tolerance. Inch series |
| BS EN 3248:2001 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Adaptors, reduced pipe end, with lockring |
| BS EN 4074:2009 | Aerospace series. Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated. Classification: 1100 MPa (at ambient temperature)/425°C |
| BS EN 4501:2006 | Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series. Classification: 1100 MPa (at ambient temperature) / 315°C |
| BS EN 3268:2014 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Pressure plugs |
| BS EN 2937:1994 | Screws, hexagon head, threaded to head in heat resisting steel FE-PA92HT (A286) classification: 900 MPa (at ambient temperature)/650°C |
| BS EN 3831:2004 | Aerospace series. Inserts, thickwall, self-locking, MJ threads, in heat resisting steel FE-PM3801 (17-4PH), MoS<sub>2</sub> coated |
| BS EN 3247:2001 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Unions, bulkhead welded end |
| BS EN 2931:1993 | Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286). Classification: 900 MPa (at ambient temperature)/650°C |
| BS EN 2940:1996 | Screws, 100° countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A 286), silver plated. Classification: 900MPa (at ambient temperature)/650°C |
| BS EN 4691-1:2017 | Aerospace series. Tie rod with integrated bolts Technical specification |
| BS EN 2549:2006 | Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium, anodized, MoS<sub>2</sub> lubricated. Classification: 1100 MPa (at ambient temperature) / 315°C |
| BS EN 3907:2004 | Aerospace series. Bolts, double hexagon head, normal shank, long thread, in titanium alloy TI-P64001, MoS<sub>2</sub> coated. Classification: 1100MPa (at ambient temperature)/350°C |
| BS EN 4307:2005 | Aerospace series. Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness) |
| EN 3642:1996 | Aerospace series - Rivets, solid, 100° countersunk normal head with dome, in titanium TI-PO2, anodized, inch based series |
| EN 3831:2004 | Aerospace series - Inserts, thickwall, self-locking, MJ threads, in heat resisting steel FE-PM3801 (17-4PH), MoS2 coated |
| EN 4135:2009 | Aerospace series - Bolts, normal bi-hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 °C |
| EN 4552:2015 | Aerospace series - Pipe coupling 37°, spherical, in heat resisting steel - Straight nipples, welded end - Inch series |
| EN 2648:2013 | Aerospace series - Washers, concave, in alloy steel, cadmium plated |
| EN 3710:2008 | Aerospace series - Sockets, bi-hexagonal - Technical Specification |
| EN 4610:2005 | Aerospace series - Pipe coupling 8° 30' in titanium alloy - Elbows 45°, with thrust wire nut |
| EN 4538-003:2010 | Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations - Narrow series - Dimensions and loads - Part 003: Inch series with low friction coefficient |
| EN 4075:2008 | Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in corrosion resisting steel, passivated - Classification: 490 MPa (at ambient temperature) / 425 °C |
| EN 2887:1995 | Aerospace series - Bolts, normal hexagonal head, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature) / 425 °C |
| EN 3820:2017 | Aerospace series - Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315 °C |
| EN 3304:1996 | Aerospace series - Screws, 100° countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315 °C |