ISO 13485:2016
Current
The latest, up-to-date edition.
Medical devices Quality management systems Requirements for regulatory purposes
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English, French
25-02-2016
ISO 13485:2016 specifies requirements for a quality management system where an organization needs to demonstrate its ability to provide medical devices and related services that consistently meet customer and applicable regulatory requirements. Such organizations can be involved in one or more stages of the life-cycle, including design and development, production, storage and distribution, installation, or servicing of a medical device and design and development or provision of associated activities (e.g. technical support). ISO 13485:2016 can also be used by suppliers or external parties that provide product, including quality management system-related services to such organizations.
Requirements of ISO 13485:2016 are applicable to organizations regardless of their size and regardless of their type except where explicitly stated. Wherever requirements are specified as applying to medical devices, the requirements apply equally to associated services as supplied by the organization.
The processes required by ISO 13485:2016 that are applicable to the organization, but are not performed by the organization, are the responsibility of the organization and are accounted for in the organization's quality management system by monitoring, maintaining, and controlling the processes.
If applicable regulatory requirements permit exclusions of design and development controls, this can be used as a justification for their exclusion from the quality management system. These regulatory requirements can provide alternative approaches that are to be addressed in the quality management system. It is the responsibility of the organization to ensure that claims of conformity to ISO 13485:2016 reflect any exclusion of design and development controls.
If any requirement in Clauses 6, 7 or 8 of ISO 13485:2016 is not applicable due to the activities undertaken by the organization or the nature of the medical device for which the quality management system is applied, the organization does not need to include such a requirement in its quality management system. For any clause that is determined to be not applicable, the organization records the justification as described in 4.2.2.
DevelopmentNote |
Supersedes ISO/DIS 13485 and ISO TR 14969. (02/2016)
|
DocumentType |
Standard
|
Pages |
36
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Supersedes |
DIN EN ISO 25424:2011-09 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
99/562423 DC : DRAFT APR 99 | BS:ENISO 14937 - STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL CRITERIA FOR CHARACTERIZATION OF A STERILIZING AGENT AND DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS |
CSA ISO 15197 : 2015 | IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE MONITORING SYSTEMS FOR SELF-TESTING IN MANAGING DIABETES MELLITUS |
03/104519 DC : DRAFT FEB 2003 | BS ISO 11737-3 - STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 3: GUIDANCE ON EVALUATION AND INTERPRETATION OF BIOBURDEN DATA |
UNE-EN ISO 25539-2:2013 | Cardiovascular implants - Endovascular devices - Part 2: Vascular stents (ISO 25539-2:2012) |
BS EN 15224:2016 | Quality management systems. EN ISO 9001:2015 for healthcare |
DIN EN ISO 11135-1:2007-08 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
EN ISO 15378:2017 | Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) (ISO 15378:2017) |
BS EN ISO 80601-2-13:2012 | Medical electrical equipment Particular requirements for basic safety and essential performance of an anaesthetic workstation |
AAMI SW87 : 2012 | APPLICATION OF QUALITY MANAGEMENT SYSTEM CONCEPTS TO MEDICAL DEVICE DATA SYSTEMS |
I.S. EN 1041:2008+A1:2013 | INFORMATION SUPPLIED BY THE MANUFACTURER OF MEDICAL DEVICES |
ISO 14708-7:2013 | Implants for surgery Active implantable medical devices Part 7: Particular requirements for cochlear implant systems |
I.S. EN ISO 5840:2009 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES |
17/30363625 DC : DRAFT SEP 2017 | BS EN ISO 11138-7 - STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 7: GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
PD ISO/TR 27809:2007 | Health informatics. Measures for ensuring patient safety of health software |
02/124462 DC : DRAFT DEC 2002 | BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
10/30236480 DC : 0 | BS EN 16224 - HEALTH CARE PROVISION BY CHIROPRACTORS |
BS EN ISO 14155:2011 | Clinical investigation of medical devices for human subjects. Good clinical practice |
ISO 19611:2017 | Traditional Chinese medicine — Air extraction cupping device |
04/30089749 DC : DRAFT DEC 2004 | BS EN 62304 - MEDICAL DEVICE SOFTWARE - SOFTWARE LIFE-CYCLE PROCESSES |
BS ISO 18562-1:2017 | Biocompatibility evaluation of breathing gas pathways in healthcare applications Evaluation and testing within a risk management process |
BS EN 15927:2010 | Services offered by hearing aid professionals |
I.S. EN 15424:2007 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
I.S. EN ISO 22523:2006 | EXTERNAL LIMB PROSTHESES AND EXTERNAL ORTHOSES - REQUIREMENTS AND TEST METHODS |
08/30149503 DC : DRAFT JAN 2008 | BS EN ISO 14161 - STERILIZATION OF HEALTH CAR PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
12/30261215 DC : 0 | BS EN 13060 - SMALL STEAM STERILIZERS |
BS EN ISO 5840-2:2015 | Cardiovascular implants. Cardiac valve prostheses Surgically implanted heart valve substitutes |
ASTM F 2633 : 2013 : REDLINE | Standard Specification for Wrought Seamless Nickel-Titanium Shape Memory Alloy Tube for Medical Devices and Surgical Implants |
PD ISO/TS 17665-3:2013 | Sterilization of health care products. Moist heat Guidance on the designation of a medical device to a product family and processing category for steam sterilization |
I.S. EN 13824:2005 | STERILIZATION OF MEDICAL DEVICES - ASEPTIC PROCESSING OF LIQUID MEDICAL DEVICES - REQUIREMENTS |
PD IEC/TR 62366-2:2016 | Medical devices Guidance on the application of usability engineering to medical devices |
I.S. EN ISO 22442-3:2007 | MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - PART 3: VALIDATION OF THE ELIMINATION AND/OR INACTIVATION OF VIRUSES AND TRANSMISSIBLE SPONGIFORM ENCEPHALOPATHY (TSE) AGENTS |
PREN ISO 11140-1 : DRAFT 2012 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 1: GENERAL REQUIREMENTS (ISO/DIS 11140-1:2012) |
16/30331650 DC : 0 | BS EN ISO 8637-1 - EXTRACORPOREAL SYSTEMS FOR BLOOD PURIFICATION - PART 1: HAEMODIALYSERS, HAEMODIAFILTERS, HAEMOFILTERS AND HAEMOCONCENTRATORS |
DD ISO/TS 12417:2011 | Cardiovascular implants and extracorporeal systems. Vascular device-drug combination products |
DIN EN ISO 12417-1:2016-02 | Cardiovascular implants and extracorporeal systems - Vascular device-drug combination products - Part 1: General requirements (ISO 12417-1:2015) |
ISO/TS 15843:2000 | Sterilization of health care products Radiation sterilization Product families and sampling plans for verification dose experiments and sterilization dose audits, and frequency of sterilization dose audits |
ANSI/AAMI/ISO 13408-3:2006(R2015) | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 3: LYOPHILIZATION |
S.R. CEN/TR 17223:2018 | GUIDANCE ON THE RELATIONSHIP BETWEEN EN ISO 13485: 2016 (MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR REGULATORY PURPOSES) AND EUROPEAN MEDICAL DEVICES REGULATION AND IN VITRO DIAGNOSTIC MEDICAL DEVICES REGULATION |
I.S. EN ISO 11737-1:2018&LC:2018 | STERILIZATION OF HEALTH CARE PRODUCTS - MICROBIOLOGICAL METHODS - PART 1: DETERMINATION OF A POPULATION OF MICROORGANISMS ON PRODUCTS (ISO 11737-1:2018) |
ISO/TS 11139:2006 | Sterilization of health care products Vocabulary |
04/300654 DC : DRAFT JAN 2004 | BS EN ISO 14630 - NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS |
EN ISO 7396-1:2016 | Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO 7396-1:2016) |
BS ISO 17593:2007 | Clinical laboratory testing and in vitro medical devices. Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy |
ISO 15198:2004 | Clinical laboratory medicine — In vitro diagnostic medical devices — Validation of user quality control procedures by the manufacturer |
UNE-EN ISO 25539-3:2012 | Cardiovascular implants - Endovascular devices - Part 3: Vena cava filters (ISO 25539-3:2011) |
I.S. EN ISO 13408-2:2018 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 2: STERILIZING FILTRATION (ISO 13408-2:2018) |
16/30346073 DC : 0 | BS ISO 16142-2 - MEDICAL DEVICES - RECOGNIZED ESSENTIAL PRINCIPLES OF SAFETY AND PERFORMANCE OF MEDICAL DEVICES - PART 2: GENERAL ESSENTIAL PRINCIPLES AND ADDITIONAL SPECIFIC ESSENTIAL PRINCIPLES FOR ALL IVD MEDICAL DEVICES AND GUIDANCE ON THE SELECTION OF STANDARDS |
09/30195717 DC : 0 | BS ISO 29942 - PROPHYLACTIC DAMS - REQUIREMENTS AND TEST METHODS |
06/30112971 DC : DRAFT JULY 2006 | ISO/IEC 62366 - MEDICAL DEVICES - APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES |
I.S. EN 16844:2017 | AESTHETIC MEDICINE SERVICES - NON-SURGICAL MEDICAL PROCEDURES |
03/304741 DC : DRAFT APR 2003 | IEC 60601-1-6 ED.1 - MEDICAL ELECTRICAL EQUIPMENT - PART 1-6: GENERAL REQUIREMENTS FOR SAFETY - COLLATERAL STANDARD - USABILITY |
17/30332162 DC : 0 | BS EN ISO 7494-1 - DENTISTRY - STATIONARY DENTAL UNITS AND DENTAL PATIENT CHAIRS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
DIN EN ISO 16061:2015-09 | Instrumentation for use in association with non-active surgical implants - General requirements (ISO 16061:2015) |
ISO 13179-1:2014 | Implants for surgery Plasma-sprayed unalloyed titanium coatings on metallic surgical implants Part 1: General requirements |
04/30081258 DC : DRAFT MARCH 2004 | BS EN ISO 11737-1 - STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 1 - DETERMINATION OF A POPULATION OF MICRO ORGANISMS ON PRODUCTS |
14/30287226 DC : 0 | BS EN ISO 15378 - PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008, WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP) |
PREN 14180 : DRAFT 2012 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
AAMI ISO 10993-1 : 2009 : R2013 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 1: EVALUATION AND TESTING WITHIN A RISK MANAGEMENT PROCESS |
BS EN ISO 26782:2009 | Anaesthetic and respiratory equipment. Spirometers intended for the measurement of time forced expired volumes in humans |
DD CEN ISO/TS 11135-2:2008 | Sterilization of health care products. Ethylene oxide Guidance on the application of ISO 11135-1 |
BS ISO 18666:2015 | Traditional Chinese medicine. General requirements of moxibustion devices |
ANSI/AAMI/ISO 11138-1:2017 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 1: GENERAL REQUIREMENTS |
16/30302485 DC : 0 | BS EN ISO 11737-1 - STERILIZATION OF HEALTH CARE PRODUCTS - MICROBIOLOGICAL METHODS - PART 1: DETERMINATION OF A POPULATION OF MICROORGANISMS ON PRODUCT |
05/30106198 DC : 0 | EN ISO 22442-3 - MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - PART 3: VALIDATION OF THE ELIMINATION AND/OR INACTIVATION OF VIRUSES AND TRANSMISSIBLE SPONGIFORM ENCEPHALOPATHY (TSE) AGENTS |
DIN EN ISO 11135:2014-10 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11135:2014) |
17/30343656 DC : 0 | BS ISO 21426 - TOURISM AND RELATED SERVICES - MEDICAL SPA - SERVICE REQUIREMENTS |
16/30338304 DC : 0 | BS ISO/ASTM 52903-1 - ADDITIVE MANUFACTURING - STANDARD SPECIFICATION FOR MATERIAL EXTRUSION BASED ADDITIVE MANUFACTURING OF PLASTIC MATERIALS - PART 1: FEEDSTOCK MATERIALS |
DIN EN ISO 13408-7:2015-11 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 7: ALTERNATIVE PROCESSES FOR MEDICAL DEVICES AND COMBINATION PRODUCTS (ISO 13408-7:2012) |
04/30090376 DC : DRAFT DEC 2004 | ISO 13408-3 - ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 3: LYOPHILIZATION |
ANSI/AAMI/ISO 25539-2:2012 | CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 2: VASCULAR STENTS |
PREN 285 : DRAFT 2013 | STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
06/30106186 DC : 0 | ISO 10993-1 - BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 1: EVALUATION AND TESTING WITHIN A RISK MANAGEMENT SYSTEM |
BS EN 62366-1:2015 | Medical devices Application of usability engineering to medical devices |
07/30157769 DC : DRAFT DEC 2007 | BS EN ISO 11737-2 - STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE VALIDATION OF A STERILIZATION PROCESS |
CSA Z11135-2 : 2009 : R2014 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 2: GUIDANCE ON THE APPLICATION OF ISO 11135-1 |
CSA Z1416: 2011 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
BS EN 62353:2014 | Medical electrical equipment. Recurrent test and test after repair of medical electrical equipment |
CSA Z11135-1 :2009 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
AAMI ISO TIR 16142 : 2005 | MEDICAL DEVICES - GUIDANCE ON THE SELECTION OF STANDARDS IN SUPPORT OF RECOGNIZED ESSENTIAL PRINCIPLES OF SAFETY AND PERFORMANCE OF MEDICAL DEVICES |
CSA Z11135 : 2015 | STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
AAMI ISO 22442-3:2007 | MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - PART 3: VALIDATION OF THE ELIMINATION AND/OR INACTIVATION OF VIRUSES AND TRANSMISSIBLE SPONGIFORM ENCEPHALOPATHY (TSE) AGENTS |
08/30133979 DC : DRAFT MAY 2008 | BS ISO 23409 - MALE CONDOMS - REQUIREMENTS AND TEST METHODS FOR CONDOMS MADE FROM SYNTHETIC MATERIALS |
ISO 11607-1:2006 | Packaging for terminally sterilized medical devices Part 1: Requirements for materials, sterile barrier systems and packaging systems |
CSA ISO 14937 : 2011 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
BIS IS/ISO 15197 : 2013 | IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE MONITORING SYSTEM FOR SELF-TESTING IN MANAGING DIABETES MELLITUS |
ISO 23409:2011 | Male condoms Requirements and test methods for condoms made from synthetic materials |
CSA ISO 14971 : 2007 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
PREN 13060 : DRAFT 2012 | SMALL STEAM STERILIZERS |
CSA Z11140.1 : 2007 : R2012 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 1: GENERAL REQUIREMENTS |
DIN EN ISO 5840-3:2013-06 | Cardiovascular implants - Cardiac valve prostheses - Part 3: Heart valve substitutes implanted by transcatheter techniques (ISO 5840-3:2013) |
CR 14060:2000 | Medical device traceability |
I.S. EN 16844:2017+A2:2019 | Aesthetic medicine services - Non-surgical medical treatments |
AAMI ISO 11607-1 : 2006 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS, AND PACKAGING SYSTEMS |
ISO 16840-6:2015 | Wheelchair seating — Part 6: Simulated use and determination of the changes in properties of seat cushions |
DIN EN ISO 7199:2015-06 (Draft) | CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - BLOOD-GAS EXCHANGERS (OXYGENATORS) (ISO 7199:2016) |
ISO 19227:2018 | Implants for surgery — Cleanliness of orthopedic implants — General requirements |
IWA 1:2005 | Quality management systems Guidelines for process improvements in health service organizations |
DIN EN ISO 12870:2015-07 (Draft) | OPHTHALMIC OPTICS - SPECTACLE FRAMES - REQUIREMENTS AND TEST METHODS (ISO 12870:2012) |
PREN ISO 11137-2 : DRAFT 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE |
CSA ISO 7199 : 0 | CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - BLOOD-GAS EXCHANGERS (OXYGENATORS) |
AAMI ISO 5840-1 : 2016 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 1: GENERAL REQUIREMENTS |
I.S. EN 15927:2010 | SERVICES OFFERED BY HEARING AID PROFESSIONALS |
I.S. EN ISO 26782:2009 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - SPIROMETERS INTENDED FOR THE MEASUREMENT OF TIME FORCED EXPIRED VOLUMES IN HUMANS |
BS EN ISO 7396-1:2016 | Medical gas pipeline systems Pipeline systems for compressed medical gases and vacuum |
I.S. EN ISO 5840-1:2015 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 1: GENERAL REQUIREMENTS (ISO 5840-1:2015) |
ANSI/AAMI/ISO 15674:2016 | CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - HARD-SHELL CARDIOTOMY/VENOUS RESERVOIR SYSTEMS (WITH/WITHOUT FILTER) AND SOFT VENOUS RESERVOIR BAGS |
AAMI ISO 13408-3:2006 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 3: LYOPHILIZATION |
ANSI/AAMI/ISO 11135:2014 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
ISO 5359:2014 | Anaesthetic and respiratory equipment Low-pressure hose assemblies for use with medical gases |
AAMI IEC 62366-1 : 2015 | MEDICAL DEVICES - PART 1: APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES |
ISO/TR 15499:2016 | Biological evaluation of medical devices Guidance on the conduct of biological evaluation within a risk management process |
ISO 16142-2:2017 | Medical devices — Recognized essential principles of safety and performance of medical devices — Part 2: General essential principles and additional specific essential principles for all IVD medical devices and guidance on the selection of standards |
CSA ISO TR 13154 : 2014 | MEDICAL ELECTRICAL EQUIPMENT - DEPLOYMENT, IMPLEMENTATION AND OPERATIONAL GUIDELINES FOR IDENTIFYING FEBRILE HUMANS USING A SCREENING THERMOGRAPH |
ISO 29943-1:2017 | Condoms — Guidance on clinical studies — Part 1: Male condoms, clinical function studies based on self-reports |
CSA Z17665-1 : 2009 : FR | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
UNE-EN ISO 22442-1:2016 | Medical devices utilizing animal tissues and their derivatives - Part 1: Application of risk management (ISO 22442-1:2015) |
ASTM F 2848 : 2017 : REDLINE | Standard Specification for Medical-Grade Ultra-High Molecular Weight Polyethylene Yarns |
I.S. EN 16224:2012 | HEALTHCARE PROVISION BY CHIROPRACTORS |
I.S. EN 13795:2011 | SURGICAL DRAPES, GOWNS AND CLEAN AIR SUITS, USED AS MEDICAL DEVICES FOR PATIENTS, CLINICAL STAFF AND EQUIPMENT - GENERAL REQUIREMENTS FOR MANUFACTURERS, PROCESSORS AND PRODUCTS, TEST METHODS, PERFORMANCE REQUIREMENTS AND PERFORMANCE LEVELS |
AAMI ISO 11137-1:2006 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
17/30358661 DC : 0 | BS EN 13795-2 - SURGICAL CLOTHING AND DRAPES - REQUIREMENTS AND TEST METHODS - PART 2: CLEAN AIR SUITS |
UNE-EN ISO 11607-1:2017 | Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems (ISO 11607-1:2006, including Amd 1:2014) |
ASTM F 2181 : 2014 : REDLINE | Standard Specification for Wrought Seamless Stainless Steel Tubing for Surgical Implants |
ASTM F 3213 : 2017 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion |
I.S. EN ISO 15194:2009 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
ISO/TS 12417:2011 | Cardiovascular implants and extracorporeal systems Vascular device-drug combination products |
AAMI ES60601-1 : 2005 : INC : AMD 1 : 2012 : R201200 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
AAMI ES60601-1 : 2005 : INC : AMD 2 : 2012 : R201200 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
AAMI ES60601-1 : 2005 : R2012 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
EN 285:2015 | Sterilization - Steam sterilizers - Large sterilizers |
BS EN ISO 80601-2-13:2012+A2:2019 | Medical electrical equipment Particular requirements for basic safety and essential performance of an anaesthetic workstation |
DIN EN ISO 11140-1:2015-03 | Sterilization of health care products - Chemical indicators - Part 1: General requirements (ISO 11140-1:2014) |
DIN EN ISO 22442-1:2016-05 | Medical devices utilizing animal tissues and their derivatives - Part 1: Application of risk management (ISO 22442-1:2015) |
DIN EN 1422:2014-08 | STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS |
DIN EN ISO 11137-3:2015-08 (Draft) | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL (ISO 11137-3:2017) |
BS EN ISO 10993-1 : 2009-10 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 1: EVALUATION AND TESTING WITHIN A RISK MANAGEMENT PROCESS (ISO 10993-1:2009) |
BS EN 556-1:2001 | Sterilization of medical devices. Requirements for medical devices to be designated \'STERILE\' Part 1. Requirements for terminally sterilized medical devices |
ISO 81060-1:2007 | Non-invasive sphygmomanometers — Part 1: Requirements and test methods for non-automated measurement type |
UNE-EN ISO 11608-1:2015 | Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO 11608-1:2014) |
BS EN ISO 11140-1:2014 | Sterilization of health care products. Chemical indicators General requirements |
ISO 11135-1:2007 | Sterilization of health care products Ethylene oxide Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices |
ISO/IEEE 11073-00103:2015 | Health informatics Personal health device communication Part 00103: Overview |
BS EN ISO 22523:2006 | External limb prostheses and external orthoses. Requirements and test methods |
UNE-EN ISO 14161:2010 | Sterilization of health care products - Biological indicators - Guidance for the selection, use and interpretation of results (ISO 14161:2009) |
BS EN ISO 22442-2:2015 | Medical devices utilizing animal tissues and their derivatives Controls on sourcing, collection and handling |
BS EN ISO 14534:2015 | Ophthalmic optics. Contact lenses and contact lens care products. Fundamental requirements |
ISO 25539-3:2011 | Cardiovascular implants Endovascular devices Part 3: Vena cava filters |
BS EN 15424:2007 | Sterilization of medical devices. Low temperature steam and formaldehyde. Requirements for development, validation and routine control of a sterilization process for medical devices |
BS EN ISO 14160:2011 | Sterilization of health care products. Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives. Requirements for characterization, development, validation and routine control of a sterilization process for medical devices |
BS EN ISO 14630:2012 | Non-active surgical implants. General requirements |
BS EN ISO 14161:2009 | Sterilization of health care products. Biological indicators. Guidance for the selection, use and interpretation of results |
BS EN 13824:2004 | Sterilization of medical devices. Aseptic processing of liquid medical devices. Requirements |
ISO 13408-1:2008 | Aseptic processing of health care products — Part 1: General requirements |
ISO 11140-1:2014 | Sterilization of health care products Chemical indicators Part 1: General requirements |
DIN EN 1422:1997-11 | STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS |
I.S. EN ISO 11608-1:2015 | NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 1: NEEDLE-BASED INJECTION SYSTEMS (ISO 11608-1:2014) |
DIN EN ISO 11980:2013-03 | Ophthalmic optics - Contact lenses and contact lens care products - Guidance for clinical investigations (ISO 11980:2012) |
NF EN ISO 11737-2 : 2010 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS |
EN ISO 25539-3:2011 | Cardiovascular implants - Endovascular devices - Part 3: Vena cava filters (ISO 25539-3:2011) |
CEN/TS 15224:2005 | Health services - Quality management systems - Guide for the use of EN ISO 9001:2000 |
EN 62304:2006/A1:2015 | MEDICAL DEVICE SOFTWARE - SOFTWARE LIFE-CYCLE PROCESSES (IEC 62304:2006/A1:2015) |
CEN ISO/TR 14969:2005 | Medical devices - Quality management systems - Guidance on the application of ISO 13485:2003 (ISO/TR 14969:2004) |
EN ISO 80601-2-13:2012 | Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation (ISO 80601-2-13:2011) |
EN 62366 : 2008 AMD 1 2015 | MEDICAL DEVICES - APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES (IEC 62366:2007/A1:2014) |
EN ISO 11140-1:2014 | Sterilization of health care products - Chemical indicators - Part 1: General requirements (ISO 11140-1:2014) |
EN 15224:2016 | Quality management systems - EN ISO 9001:2015 for healthcare |
DIN EN ISO 21649:2010-01 | Needle-free injectors for medical use - Requirements and test methods (ISO 21649:2006) |
CR 12401 : 1996 | DENTISTRY - GUIDANCE ON THE CLASSIFICATION OF DENTAL DEVICES AND ACCESSORIES |
EN ISO 22523 : 2006 | EXTERNAL LIMB PROSTHESES AND EXTERNAL ORTHOSES - REQUIREMENTS AND TEST METHODS (ISO 22523:2006) |
DIN EN 15424:2007-08 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
UNI EN ISO 14160 : 2011 | STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
EN 62353:2014 | Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment |
DIN EN 15224:2017-05 | QUALITY MANAGEMENT SYSTEMS - EN ISO 9001:2015 FOR HEALTHCARE |
AAMI TIR52:2014(R2022) | Environmental monitoring for terminally sterilized healthcare products |
ISO 17593:2007 | Clinical laboratory testing and in vitro medical devices Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy |
BS ISO 19611:2017 | Traditional Chinese medicine. Air extraction cupping device |
ANSI/AAMI/ ISO 11137-2:2013(R2019) | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE |
PREN 1422 : DRAFT 2011 | STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS |
ISO/TR 20520:2018 | Traditional Chinese medicine Infection control for acupuncture treatment |
UNI EN ISO 26782 : 2009 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - SPIROMETERS INTENDED FOR THE MEASUREMENT OF TIME FORCED EXPIRED VOLUMES IN HUMANS |
ISO 13960:2010 | Cardiovascular implants and extracorporeal systems Plasmafilters |
04/30081279 DC : DRAFT MAY 2004 | BS EN ISO 11137-3 - STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS |
BS EN ISO 20072:2013 | Aerosol drug delivery device design verification. Requirements and test methods |
17/30359001 DC : 0 | BS ISO/IEC GUIDE 63 - GUIDE TO THE DEVELOPMENT AND INCLUSION OF ASPECTS OF SAFETY IN INTERNATIONAL STANDARDS FOR MEDICAL DEVICES |
I.S. EN 82304-1:2017 | HEALTH SOFTWARE - PART 1: GENERAL REQUIREMENTS FOR PRODUCT SAFETY |
AAMI ISO 81060-1 : 2007 | NON INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR NON-AUTOMATED MEASUREMENT TYPE |
UNE-EN ISO 11608-5:2013 | Needle-based injection systems for medical use - Requirements and test methods - Part 5: Automated functions (ISO 11608-5:2012) |
UNE-EN ISO 16061:2015 | Instrumentation for use in association with non-active surgical implants - General requirements (ISO 16061:2015) |
07/30169357 DC : 0 | BS ISO 25841 - FEMALE CONDOMS - REQUIREMENTS AND TEST METHODS |
UNE-EN ISO 7198:2017 | Cardiovascular implants and extracorporeal systems - Vascular prostheses - Tubular vascular grafts and vascular patches (ISO 7198:2016) |
12/30262894 DC : 0 | BS EN 14180 - STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
CSA PLUS 15189 : 2010 | THE ISO 15189:2007 ESSENTIALS - A PRACTICAL HANDBOOK FOR IMPLEMENTING THE ISO 15189:2007 STANDARD FOR MEDICAL LABORATORIES |
ISO/TR 27809:2007 | Health informatics Measures for ensuring patient safety of health software |
AAMI/ISO TIR15499:2017 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - GUIDANCE ON THE CONDUCT OF BIOLOGICAL EVALUATION WITHIN A RISK MANAGEMENT PROCESS |
UNE-EN ISO 13504:2013 | Dentistry - General requirements for instruments and related accessories used in dental implant placement and treatment (ISO 13504:2012) |
DIN EN ISO 11608-5:2013-01 | Needle-based injection systems for medical use - Requirements and test methods - Part 5: Automated functions (ISO 11608-5:2012) |
16/30346829 DC : 0 | BS ISO 16038 - MALE CONDOMS - GUIDANCE ON THE USE OF ISO 4074 AND ISO 23409 IN THE QUALITY MANAGEMENT CONDOMS |
15/30282559 DC : 0 | BS EN ISO 11137-3 - STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL |
PREN 13795-1 : DRAFT 2017 | SURGICAL CLOTHING AND DRAPES - REQUIREMENTS AND TEST METHODS - PART 1: SURGICAL DRAPES AND GOWNS |
14/30251609 DC : 0 | BS EN ISO 12417-1 - CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - VASCULAR DEVICE-DRUG COMBINATION PRODUCTS - PART 1: GENERAL REQUIREMENTS |
PD ISO/TS 17822-1:2014 | <i>In</i> <i>vitro</i> diagnostic test systems. Qualitative nucleic acid-based <i>in</i> <i>vitro</i> examination procedures for detection and identification of microbial pathogens General requirements, terms and definitions |
04/30078095 DC : DRAFT JUL 2004 | ISO 11138-1 - STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 1: GENERAL REQUIREMENTS |
ANSI/AAMI/ISO 15675:2016 | CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - CARDIOPULMONARY BYPASS SYSTEMS - ARTERIAL BLOOD LINE FILTERS |
08/30179586 DC : DRAFT MAR 2008 | BS ISO 7199 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - BLOOD-GAS EXCHANGERS (OXYGENATORS) |
DIN ISO 13022 E : 2014 | MEDICAL PRODUCTS CONTAINING VIABLE HUMAN CELLS - APPLICATION OF RISK MANAGEMENT AND REQUIREMENTS FOR PROCESSING PRACTICES (ISO 13022:2012) |
AAMI IEC TIR 80001-2-2 : 2012 | APPLICATION OF RISK MANAGEMENT FOR IT-NETWORKS INCORPORATING MEDICAL DEVICES - PART 2-2: GUIDANCE FOR THE DISCLOSURE AND COMMUNICATION OF MEDICAL DEVICE SECURITY NEEDS, RISKS AND CONTROLS |
11/30252448 DC : 0 | BS EN 1422 - STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS |
ISO 12870:2016 | Ophthalmic optics Spectacle frames Requirements and test methods |
14/30287753 DC : 0 | BS EN 62304 AMENDMENT 1 - MEDICAL DEVICE SOFTWARE - SOFTWARE LIFE CYCLE PROCESSES |
BS ISO 15378 : 2006 AMD 17315 | PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2000, WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP) |
15/30321502 DC : 0 | BS EN ISO 11138-1 - STERILIZATION OF HEALTH PRODUCTS - BIOLOGICAL INDICATORS - PART 1: GENERAL REQUIREMENTS |
BS EN ISO 13408-7:2015 | Aseptic processing of health care products Alternative processes for medical devices and combination products |
15/30321715 DC : 0 | BS ISO 15675 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - CARDIOPULMONARY BYPASS SYSTEMS - ARTERIAL BLOOD LINE FILTERS |
17/30357741 DC : 0 | BS ISO 11040-6 - PREFILLED SYRINGES - PART 6: PLASTIC BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING |
DIN EN ISO 11607-2:2014-11 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES (ISO 11607-2:2006 + AMD 1.:2014) |
ASTM F 1108 : 2014 : REDLINE | Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406) |
I.S. EN ISO 11135:2014 | STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11135:2014) |
I.S. EN ISO 5840-3:2013 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 3: HEART VALVE SUBSTITUTES IMPLANTED BY TRANSCATHETER TECHNIQUES (ISO 5840-3:2013) |
17/30344601 DC : 0 | BS EN ISO 10993-1 - BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 1: EVALUATION AND TESTING WITHIN A RISK MANAGEMENT PROCESS |
14/30281560 DC : 0 | BS EN ISO 5840-2 - CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 2: SURGICALLY IMPLANTED HEART VALVE SUBSTITUTES |
BS ISO 11658:2012 | Cardiovascular implants and extracorporeal systems. Blood/tissue contact surface modifications for extracorporeal perfusion systems |
DIN EN 16224:2015-03 | HEALTHCARE PROVISION BY CHIROPRACTORS |
13/30278952 DC : 0 | BS EN 16372 - AESTHETIC SURGERY AND AESTHETIC NON-SURGICAL MEDICAL SERVICES |
DIN EN ISO 13408-1:2015-12 | Aseptic processing of health care products - Part 1: General requirements (ISO 13408-1:2008, including Amd 1:2013) |
14/30292011 DC : 0 | BS EN ISO 23747 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - PEAK EXPIRATORY FLOW METERS FOR THE ASSESSMENT OF PULMONARY FUNCTION IN SPONTANEOUSLY BREATHING HUMANS |
12/30252545 DC : 0 | BS ISO 15883-1:2006/AMD - WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
11/30244091 DC : 0 | BS EN ISO 11135 - STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
BS EN ISO 7199:2017 | Cardiovascular implants and artificial organs. Blood-gas exchangers (oxygenators) |
BS ISO 13179-1:2014 | Implants for surgery. Plasma-sprayed unalloyed titanium coatings on metallic surgical implants General requirements |
11/30212235 DC : 0 | BS EN ISO 13504 - DENTISTRY - GENERAL REQUIREMENTS FOR INSTRUMENTS AND RELATED ACCESSORIES USED IN DENTAL IMPLANT PLACEMENT AND TREATMENT |
15/30321712 DC : 0 | BS ISO 15674 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - HARD-SHELL CARDIOTOMY/VENOUS RESERVOIR SYSTEMS (WITH/WITHOUT FILTER) AND SOFT VENOUS RESERVOIR BAGS |
14/30267655 DC : 0 | BS ISO 13779-6 - IMPLANTS FOR SURGERY - HYDROXYAPATITE - PART 6: POWDERS |
BIP 2071 : 2005 | MEDICAL DEVICES: ISO 13485 AND ISO 9001 |
12/30238553 DC : 0 | BS EN ISO 11140-1 - STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 1: GENERAL REQUIREMENTS |
15/30321957 DC : 0 | BS EN ISO 7199 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS BLOOD-GAS EXCHANGERS (OXYGENATORS) |
08/30138762 DC : DRAFT APR 2008 | BS EN ISO 11980 - OPHTHALMIC OPTICS - CONTACT LENSES AND CONTACT LENS CARE PRODUCTS - GUIDANCE FOR CLINICAL INVESTIGATIONS |
DIN EN ISO 25539-3:2012-03 | Cardiovascular implants - Endovascular devices - Part 3: Vena cava filters (ISO 25539-3:2011) |
CSA Z14161 : 2011 : R2015 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
EN 82304-1:2017 | Health Software - Part 1: General requirements for product safety |
13/30278676 DC : 0 | BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
CSA Z11137-3 : 2007 : R2012 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS |
12/30212355 DC : 0 | BS ISO 13179-1 - IMPLANTS FOR SURGERY - PLASMA SPRAYED COATINGS OF UNALLOYED TITANIUM - PART 1: GENERAL REQUIREMENTS |
17/30349163 DC : 0 | BS ISO 20387 - BIOTECHNOLOGY - BIOBANKING - GENERAL REQUIREMENTS FOR BIOBANKING |
NF CEN ISO/TS 11135-2 : 2008 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 2: GUIDANCE ON THE APPLICATION OF ISO 11135-1 |
PD ISO/TR 13154:2017 | Medical electrical equipment. Deployment, implementation and operational guidelines for identifying febrile humans using a screening thermograph |
BS ISO 8009-1:1997 | Reusable rubber contraceptive diaphragms Classification, sampling and requirements |
BS EN 45502-2-3:2010 | Active implantable medical devices Particular requirements for cochlear and auditory brainstem implant systems |
04/30048205 DC : DRAFT JUL 2004 | BS EN ISO 17665 - STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
03/103026 DC : DRAFT JAN 2003 | BS EN ISO 5840 - CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES |
14/30266295 DC : 0 | BS ISO 18362 - PROCESSING OF CELL-BASED HEALTH CARE PRODUCTS |
AAMI ISO 5840 : 2005 : R2010 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES |
BS ISO 15674:2009 | Cardiovascular implants and artificial organs. Hard-shell cardiotomy/venous reservoir systems (with/without filter) and soft venous reservoir bags |
CSA Z11137-2 : 2007 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE |
15/30303073 DC : 0 | BS ISO 25841 - FEMALE CONDOMS - REQUIREMENTS AND TEST METHODS |
ANSI/AAMI/ISO 16142-2:2017 | MEDICAL DEVICES - RECOGNIZED ESSENTIAL PRINCIPLES OF SAFETY AND PERFORMANCE OF MEDICAL DEVICES - PART 2: GENERAL ESSENTIAL PRINCIPLES AND ADDITIONAL SPECIFIC ESSENTIAL PRINCIPLES FOR ALL IVD MEDICAL DEVICES AND GUIDANCE ON THE SELECTION OF STANDARDS |
CSA Z11135-2 : 2009 : FR | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 2: GUIDANCE ON THE APPLICATION OF ISO 11135-1 |
08/30179592 DC : DRAFT MAR 2008 | BS ISO 15675 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - CARDIOPULMONARY BYPASS SYSTEMS - ARTERIAL BLOOD LINE FILTERS |
BS ISO 29943-1:2017 | Condoms. Guidance on clinical studies Male condoms, clinical function studies based on self-reports |
BS ISO 81060-1 : 2007 COR 2012 | NON-INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR NON-AUTOMATED MEASUREMENT TYPE |
ISO 18385:2016 | Minimizing the risk of human DNA contamination in products used to collect, store and analyze biological material for forensic purposes — Requirements |
DIN EN ISO 14155:2012-01 | CLINICAL INVESTIGATION OF MEDICAL DEVICES FOR HUMAN SUBJECTS - GOOD CLINICAL PRACTICE (ISO 14155:2011 + COR. 1:2011) |
16/30302520 DC : 0 | BS ISO 19611 - TRADITIONAL CHINESE MEDICINE - AIR EXHAUST CUPPING APPARATUS FOR MEDICAL USE |
ANSI/AAMI/ISO 13022:2012 | MEDICAL PRODUCTS CONTAINING VIABLE HUMAN CELLS - APPLICATION OF RISK MANAGEMENT AND REQUIREMENTS FOR PROCESSING PRACTICES |
AAMI ISO 5840 :2005 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES |
PD ISO/TR 16142:2006 | Medical devices. Guidance on the selection of standards in support of recognized essential principles of safety and performance of medical devices |
06/30137313 DC : 0 | ISO/IEC 81060-1 - NON-INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR MECHANICAL TYPE |
AAMI ISO 17665-1 : 2006 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
S.R. CEN/CLC/TR 14060:2014 | MEDICAL DEVICE TRACEABILITY ENABLED BY UNIQUE DEVICE IDENTIFICATION (UDI) |
CSA Z11138-1 : 2007 : R2012 : FR | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 1: GENERAL REQUIREMENTS |
AAMI/ISO TIR17665-3:2014(R2016) | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - GUIDANCE ON THE DESIGNATION OF A MEDICAL PRODUCT TO A PRODUCT FAMILY AND PROCESSING CATEGORY FOR STEAM STERILIZATION |
CAN/CSA-ISO 11138-1:17 | Sterilization of health care products — Biological indicators — Part 1: General requirements (Adopted ISO 11138-1:2017, third edition, 2017-03) |
AAMI ISO 22442-3 : 2007 : R2011 | MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - PART 3: VALIDATION OF THE ELIMINATION AND/OR INACTIVATION OF VIRUSES AND TRANSMISSIBLE SPONGIFORM ENCEPHALOPATHY (TSE) AGENTS |
BS EN ISO 11607-2 : 2006 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES |
UNI CEN ISO/TS 17665-2 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF ISO 17665-1 |
I.S. EN 62366-1:2015 | MEDICAL DEVICES - PART 1: APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES |
AAMI TIR52 : 2014 | ENVIRONMENTAL MONITORING FOR TERMINALLY STERILIZED HEALTHCARE PRODUCTS |
ISO/TR 12417-2:2017 | Cardiovascular implants and extracorporeal systems — Vascular device-drug combination products — Part 2: Local regulatory information |
ISO 5910:2018 | Cardiovascular implants and extracorporeal systems — Cardiac valve repair devices |
AAMI ST72 : 2011 : R2016 | BACTERIAL ENDOTOXIN - TEST METHODS, ROUTINE MONITORING AND ALTERNATIVES TO BATCH TESTING |
UNI EN ISO 5840-3 : 2013 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 3: HEART VALVE SUBSTITUTES IMPLANTED BY TRANSCATHETER TECHNIQUES |
UNI EN 15927 : 2010 | SERVICES OFFERED BY HEARING AID PROFESSIONALS |
I.S. EN ISO 7396-1:2016 | MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINE SYSTEMS FOR COMPRESSED MEDICAL GASES AND VACUUM (ISO 7396-1:2016) |
ISO/TR 80002-2:2017 | Medical device software — Part 2: Validation of software for medical device quality systems |
BS EN 13795:2011+A1:2013 | Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment. General requirements for manufacturers, processors and products, test methods, performance requirements and performance levels |
15/30321242 DC : 0 | BS EN ISO 12870 - OPHTHALMIC OPTICS - SPECTACLE FRAMES - REQUIREMENTS AND TEST METHODS |
BS ISO 7199 : 2009 | CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - BLOOD-GAS EXCHANGERS (OXYGENATORS) |
UNE-EN ISO 20072:2013 | Aerosol drug delivery device design verification - Requirements and test methods (ISO 20072:2009) |
I.S. EN 16372:2014 | AESTHETIC SURGERY SERVICES |
EN 15927:2010 | Services offered by hearing aid professionals |
ISO 15378:2017 | Primary packaging materials for medicinal products — Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) |
I.S. EN ISO 12870:2014 | OPHTHALMIC OPTICS - SPECTACLE FRAMES - REQUIREMENTS AND TEST METHODS (ISO 12870:2016) |
UNE-EN ISO 14155:2012 | Clinical investigation of medical devices for human subjects - Good clinical practice (ISO 14155:2011) |
AAMI ISO 11137-2 : 2013 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE |
BS EN ISO 13408-1:2015 | Aseptic processing of health care products General requirements |
I.S. EN ISO 25424:2011 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
AAMI/ISO TIR 80002-2:2017 | MEDICAL DEVICE SOFTWARE - PART 2: VALIDATION OF SOFTWARE FOR MEDICAL DEVICE QUALITY SYSTEMS |
I.S. EN 13060:2014 | SMALL STEAM STERILIZERS |
AAMI ISO 11737-2 : 2009 : R2014 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS |
AAMI ISO 11737-2 :2009 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS |
BS EN 16224 : 2012 | HEALTHCARE PROVISION BY CHIROPRACTORS |
ISO 18562-1:2017 | Biocompatibility evaluation of breathing gas pathways in healthcare applications — Part 1: Evaluation and testing within a risk management process |
AAMI ISO 11607-2:2006 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING, AND ASSEMBLY PROCESSES |
CEI UNI EN 1041 : 2014 | INFORMATION SUPPLIED BY THE MANUFACTURER OF MEDICAL DEVICES |
ISO/TS 17822-1:2014 | In vitro diagnostic test systems Qualitative nucleic acid-based in vitro examination procedures for detection and identification of microbial pathogens Part 1: General requirements, terms and definitions |
AAMI ISO 11737-1 : 2006 : R2011 | STERILIZATION OF MEDICAL DEVICES - MEDICAL DEVICES - PART 1: DETERMINATION OF THE POPULATION OF MICROORGANISMS ON PRODUCT |
CSA IEC 62366-1 : 2015 | MEDICAL DEVICES - PART 1: APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES |
AAMI ISO 14155 : 2011 | CLINICAL INVESTIGATION OF MEDICAL DEVICES FOR HUMAN SUBJECTS - GOOD CLINICAL PRACTICE |
ANSI/AAMI ST15883-1:2009(R2014) &A1:2014&A2:2012 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
UNI EN ISO 14155 : 2012 | CLINICAL INVESTIGATION OF MEDICAL DEVICES FOR HUMAN SUBJECTS - GOOD CLINICAL PRACTICE |
AAMI ISO 13408-2 : 2003 : R2013 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 2: STERILIZING FILTRATION |
UNE-EN 15927:2011 | Services offered by hearing aid professionals |
AAMI ST15883-1 : 2009 : INC : AMD 1 : 2014 : R201400 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
UNE-EN ISO 18113-1:2012 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009) |
AAMI ISO 14971 : 2007 : INC : ERR 1 : 2007 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
ASTM F 3056 : 2014 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
ASTM F 2924 : 2014 : REDLINE | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion |
ISO 18666:2015 | Traditional Chinese medicine General requirements of moxibustion devices |
ASTM F 3056 : 2014 : EDT 1 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
ASTM F 2026 : 2017 : REDLINE | Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications |
ASTM F 3055 : 2014 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
ISO 14971:2007 | Medical devices Application of risk management to medical devices |
ASTM F 3055 : 2014 : EDT 1 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
I.S. EN 556-1:2002 | STERILISATION OF MEDICAL DEVICES - REQUIREMENTS FOR MEDICAL DEVICES TO BE DESIGNATED STERILE - PART 1: REQUIREMENTS FOR TERMINALLY STERILISED MEDICAL DEVICES |
UNI EN ISO 12870 : 2015 | OPHTHALMIC OPTICS - SPECTACLE FRAMES - REQUIREMENTS AND TEST METHODS |
IEC TR 61258:2008 | Guidelines for the development and use of medical electrical equipment educational materials |
DIN EN ISO 22442-2:2016-05 | Medical devices utilizing animal tissues and their derivatives - Part 2: Controls on sourcing, collection and handling (ISO 22442-2:2015) |
ISO 16038:2017 | Male condoms — Guidance on the use of ISO 4074 and ISO 23409 in the quality management of condoms |
EN ISO 14937:2009 | Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009) |
I.S. EN ISO 14971:2012 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES (ISO 14971:2007, CORRECTED VERSION 2007-10-01) |
AAMI ES60601-1 : 2005 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
DIN EN ISO 22610:2015-12 (Draft) | SURGICAL DRAPES, GOWNS AND CLEAN AIR SUITS, USED AS MEDICAL DEVICES, FOR PATIENTS, CLINICAL STAFF AND EQUIPMENT - TEST METHOD TO DETERMINE THE RESISTANCE TO WET BACTERIAL PENETRATION |
DIN EN 556-2:2015-11 | STERILIZATION OF MEDICAL DEVICES - REQUIREMENTS FOR MEDICAL DEVICES TO BE DESIGNATED 'STERILE' - PART 2: REQUIREMENTS FOR ASEPTICALLY PROCESSED MEDICAL DEVICES |
DIN EN ISO 23747:2015-12 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - PEAK EXPIRATORY FLOW METERS FOR THE ASSESSMENT OF PULMONARY FUNCTION IN SPONTANEOUSLY BREATHING HUMANS (ISO 23747:2015) |
DIN EN ISO 22442-3:2008-03 | MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - PART 3: VALIDATION OF THE ELIMINATION AND/OR INACTIVATION OF VIRUSES AND TRANSMISSIBLE SPONGIFORM ENCEPHALOPATHY (TSE) AGENTS |
DIN EN 1041:2013-12 | Information supplied by the manufacturer of medical devices (includes Amendment A1:2013) |
DIN EN ISO 17665-1:2006-11 | Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 17665-1:2006) |
DIN EN ISO 4074:2016-05 | NATURAL RUBBER LATEX MALE CONDOMS - REQUIREMENTS AND TEST METHODS (ISO 4074:2015) |
DIN EN ISO 14971:2013-04 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES (ISO 14971:2007) |
I.S. EN ISO 16054:2002 | IMPLANTS FOR SURGERY - MINIMUM DATA SETS FOR SURGICAL IMPLANTS |
UNE-EN ISO 11608-3:2013 | Needle-based injection systems for medical use - Requirements and test methods - Part 3: Finished containers (ISO 11608-3:2012) |
BS EN 556-2:2015 | Sterilization of medical devices. Requirements for medical devices to be designated \'STERILE\' Requirements for aseptically processed medical devices |
BS EN ISO 11737-2:2009 | Sterilization of medical devices. Microbiological methods Tests of sterility performed in the definition, validation and maintenance of a sterilization process |
BS EN ISO 11138-1:2017 | Sterilization of health care products. Biological indicators General requirements |
UNE-EN ISO 80601-2-13:2013 | Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation (ISO 80601-2-13:2011) |
BS EN 45502-1:2015 | Implants for surgery. Active implantable medical devices General requirements for safety, marking and for information to be provided by the manufacturer |
IEC 62353:2014 | Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment |
BS EN ISO 22442-1:2015 | Medical devices utilizing animal tissues and their derivatives Application of risk management |
UNE-EN ISO 11980:2013 | Ophthalmic optics - Contact lenses and contact lens care products - Guidance for clinical investigations (ISO 11980:2012) |
UNE-EN ISO 23747:2016 | Anaesthetic and respiratory equipment - Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans (ISO 23747:2015) |
ISO 11137-2:2013 | Sterilization of health care products — Radiation — Part 2: Establishing the sterilization dose |
ISO 7199:2016 | Cardiovascular implants and artificial organs — Blood-gas exchangers (oxygenators) |
ISO 25424:2009 | Sterilization of medical devices Low temperature steam and formaldehyde Requirements for development, validation and routine control of a sterilization process for medical devices |
I.S. EN ISO 15197:2015 | IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE MONITORING SYSTEMS FOR SELF-TESTING IN MANAGING DIABETES MELLITUS (ISO 15197:2013) |
I.S. EN ISO 14534:2015 | OPHTHALMIC OPTICS - CONTACT LENSES AND CONTACT LENS CARE PRODUCTS - FUNDAMENTAL REQUIREMENTS (ISO 14534:2011) |
EN ISO 5840-2:2015 | Cardiovascular implants - Cardiac valve prostheses - Part 2: Surgically implanted heart valve substitutes (ISO 5840-2:2015) |
I.S. EN ISO 21649:2009 | NEEDLE-FREE INJECTORS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS |
I.S. EN ISO 23747:2015 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - PEAK EXPIRATORY FLOW METERS FOR THE ASSESSMENT OF PULMONARY FUNCTION IN SPONTANEOUSLY BREATHING HUMANS (ISO 23747:2015) |
I.S. EN ISO 14937:2009 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
I.S. EN ISO 11140-1:2014 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 1: GENERAL REQUIREMENTS (ISO 11140-1:2014) |
I.S. EN ISO 11137-2:2015 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE (ISO 11137-2:2013) |
I.S. EN ISO 14160:2011 | STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
I.S. EN ISO 11608-3:2012 | NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 3: FINISHED CONTAINERS (ISO 11608-3:2012) |
I.S. EN ISO 22442-2:2015 | MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - PART 2: CONTROLS ON SOURCING, COLLECTION AND HANDLING (ISO 22442-2:2015) |
I.S. EN ISO 22442-1:2015 | MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - PART 1: APPLICATION OF RISK MANAGEMENT (ISO 22442-1:2015) |
I.S. EN ISO 11137-3:2017 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL (ISO 11137-3:2017) |
I.S. EN ISO 11138-1:2017 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 1: GENERAL REQUIREMENTS (ISO 11138-1:2017) |
I.S. EN ISO 4074:2015 | NATURAL RUBBER LATEX MALE CONDOMS - REQUIREMENTS AND TEST METHODS (ISO 4074:2015) |
EN ISO 5840-1:2015 | Cardiovascular implants - Cardiac valve prostheses - Part 1: General requirements (ISO 5840-1:2015) |
I.S. EN ISO 14727:1999 | DENTAL IMPLANTS - PREFABRICATED PARTS CONNECTING SUPRASTRUCTURES TO DENTAL IMPLANTS - CONTENTS OF TECHNICAL FILE |
I.S. EN 14180:2014 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
DIN EN ISO 11137-2:2015-11 | Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose (ISO 11137-2:2013) |
EN ISO 22442-2:2015 | Medical devices utilizing animal tissues and their derivatives - Part 2: Controls on sourcing, collection and handling (ISO 22442-2:2015) |
I.S. EN 1422:2014 | STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS |
EN ISO 22442-1:2015 | Medical devices utilizing animal tissues and their derivatives - Part 1: Application of risk management (ISO 22442-1:2015) |
DIN EN 14180:2003-10 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
I.S. EN ISO 11980:2012 | OPHTHALMIC OPTICS - CONTACT LENSES AND CONTACT LENS CARE PRODUCTS - GUIDANCE FOR CLINICAL INVESTIGATIONS (ISO 11980:2012) |
I.S. EN ISO 10451:2010 | DENTISTRY - CONTENTS OF TECHNICAL FILE FOR DENTAL IMPLANT SYSTEMS |
EN ISO 5840-3:2013 | Cardiovascular implants - Cardiac valve prostheses - Part 3: Heart valve substitutes implanted by transcatheter techniques (ISO 5840-3:2013) |
UNI EN ISO 11737-2 : 2010 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS |
I.S. EN ISO 14630:2012 | NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS (ISO 14630:2012) |
I.S. EN 45502-1:2015 | IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND FOR INFORMATION TO BE PROVIDED BY THE MANUFACTURER |
VDI 5702 Blatt 1:2017-04 | Medical device software - Medical SPICE Process assessment model |
VDI/VDE 2657 Blatt 1:2013-01 | Middleware in industrial automation - Fundamentals |
VDI 2083 Blatt 8.1:2014-10 | Cleanroom technology - Air cleanliness chemical concentration (ACC) |
NEMA/MITA 1:2015 | Good Refurbishment Practices for Medical Imaging Equipment |
UNE-EN ISO 5840-2:2016 | Cardiovascular implants - Cardiac valve prostheses - Part 2: Surgically implanted heart valve substitutes (ISO 5840-2:2015) |
15/30282343 DC : 0 | BS ISO 18746 - TRADITIONAL CHINESE MEDICINE - INTRADERMAL ACUPUNCTURE NEEDLES |
BS ISO 15198:2004 | Clinical laboratory medicine. In vitro diagnostic medical devices. Validation of user quality control procedures by the manufacturer |
I.S. EN ISO 11073-00103:2017 | HEALTH INFORMATICS - PERSONAL HEALTH DEVICE COMMUNICATION - PART 00103: OVERVIEW (ISO/IEEE 11073-00103:2015) |
04/30048118 DC : DRAFT MAY 2004 | BS EN ISO 11135 - STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
UNI EN ISO 81060-1 : 2012 | NON-INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR NON-AUTOMATED MEASUREMENT TYPE |
ANSI/AAMI/ISO 20857:2010(R2015) | STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
14/30270462 DC : 0 | BS EN ISO 5840-1 - CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 1: GENERAL REQUIREMENTS |
PREN 556-2 : DRAFT 2014 | STERILIZATION OF MEDICAL DEVICES - REQUIREMENTS FOR MEDICAL DEVICES TO BE DESIGNATED 'STERILE' - PART 2: REQUIREMENTS FOR ASEPTICALLY PROCESSED MEDICAL DEVICES |
I.S. EN ISO 81060-1:2012 | NON-INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR NON-AUTOMATED MEASUREMENT TYPE (ISO 81060-1:2007) |
05/30106194 DC : 0 | EN ISO 22442-2 - MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - PART 2: CONTROLS ON SOURCING, COLLECTION AND HANDLING |
15/30281262 DC : 0 | BS ISO 18666 - TRADITIONAL CHINESE MEDICINE - GENERAL REQUIREMENTS OF MOXIBUSTION DEVICES |
I.S. EN 285:2015 | STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
BS ISO 16142-2:2017 | Medical devices. Recognized essential principles of safety and performance of medical devices General essential principles and additional specific essential principles for all IVD medical devices and guidance on the selection of standards |
10/30196945 DC : 0 | BS ISO 25539-3 - CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 3: VENA CAVA FILTERS |
AAMI ISO 11137-1 : 2006 : INC : AMD 1 : 2013 : R201000 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
13/30285624 DC : 0 | BS EN ISO 16061 - INSTRUMENTATION FOR USE IN ASSOCIATION WITH NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS |
PD IEC/TR 60601-4-1:2017 | Medical electrical equipment Guidance and interpretation. Medical electrical equipment and medical electrical systems employing a degree of autonomy |
ISO 29942:2011 | Prophylactic dams — Requirements and test methods |
AAMI TIR52 : 2014(R2017) | ENVIRONMENTAL MONITORING FOR TERMINALLY STERILIZED HEALTHCARE PRODUCTS |
15/30317874 DC : 0 | BS EN 16844 - AESTHETIC MEDICINE SERVICES - NON-SURGICAL MEDICAL PROCEDURES |
BS ISO 15675:2009 | Cardiovascular implants and artificial organs. Cardiopulmonary bypass systems. Arterial blood line filters |
ISO 8637-1:2017 | Extracorporeal systems for blood purification — Part 1: Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators |
EN ISO 12870:2018 | Ophthalmic optics - Spectacle frames - Requirements and test methods (ISO 12870:2016) |
BS ISO 25841:2017 | Female condoms. Requirements and test methods |
I.S. EN ISO 17665-1:2006 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
ISO 11737-3:2004 | Sterilization of medical devices Microbiological methods Part 3: Guidance on evaluation and interpretation of bioburden data |
BS EN 82304-1:2017 | Health Software General requirements for product safety |
01/563350 DC : DRAFT AUG 2001 | BS ISO 25539-1 - CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 1: ENDOVASCULAR PROSTHESES |
11/30219230 DC : 0 | BS ISO 13175-3 - IMPLANTS FOR SURGERY - CALCIUM PHOSPHATES - PART 3: HYDROXYAPATITE AND BETA-TRICALCIUM PHOSPHATE BONE SUBSTITUTES |
ANSI/AAMI ST90:2017 | PROCESSING OF HEALTH CARE PRODUCTS - QUALITY MANAGEMENT SYSTEMS FOR PROCESSING IN HEALTH CARE FACILITIES |
DIN EN ISO 11607-1:2014-11 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS (ISO 11607-1:2006 + AMD 1.:2014) |
BS EN ISO 81060-1:2012 | Non-invasive sphygmomanometers Requirements and test methods for non-automated measurement type |
DIN EN ISO 26782:2010-02 | Anaesthetic and respiratory equipment - Spirometers intended for the measurement of time forced expired volumes in humans (ISO 26782:2009 + Cor. 1:2009) (includes Corrigendum AC:2009) |
BS EN ISO 12417-1:2015 | Cardiovascular implants and extracorporeal systems. Vascular device-drug combination products General requirements |
17/30250386 DC : 0 | BS ISO 17327-1 - NON-ACTIVE SURGICAL IMPLANTS - IMPLANT COATING - PART 1: GENERAL REQUIREMENTS |
EN 1041:2008+A1:2013 | Information supplied by the manufacturer of medical devices |
13/30255929 DC : 0 | BS EN ISO 7396-1 - MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINE SYSTEMS FOR COMPRESSED MEDICAL GASES AND VACUUM |
UNI EN ISO 25424 : 2011 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
ANSI/AAMI/ISO 25539-1:2017 | CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 1: ENDOVASCULAR PROSTHESES |
17/30351720 DC : 0 | BS EN ISO 11607-2 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES |
BS PD ISO/TR 14969 : 2004 AMD 15958 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003 |
BS EN ISO 5840-3:2013 | Cardiovascular implants. Cardiac valve prostheses Heart valve substitutes implanted by transcatheter techniques |
PD ISO/TR 22979:2017 | Ophthalmic implants. Intraocular lenses. Guidance on assessment of the need for clinical investigation of intraocular lens design modifications |
BS ISO 16038:2017 | Male condoms. Guidance on the use of ISO 4074 and ISO 23409 in the quality management of condoms |
UNE-EN 62304:2007 | Medical device software - Software life-cycle processes (IEC 62304:2006) |
BS ISO 16142-1:2016 | Medical devices. Recognized essential principles of safety and performance of medical devices General essential principles and additional specific essential principles for all non-IVD medical devices and guidance on the selection of standards |
BS ISO 23409:2011 | Male condoms. Requirements and test methods for condoms made from synthetic materials |
ISO 13683:1997 | Sterilization of health care products Requirements for validation and routine control of moist heat sterilization in health care facilities |
UNE-EN 62353:2015 | Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment |
BS EN 62366 : 2008 | MEDICAL DEVICES - APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES |
ISO 13175-3:2012 | Implants for surgery — Calcium phosphates — Part 3: Hydroxyapatite and beta-tricalcium phosphate bone substitutes |
13/30280551 DC : 0 | BS ISO 16840-6 - WHEELCHAIR SEATING - PART 6: SIMULATED USE AND DETERMINATION OF THE CHANGES IN PROPERTIES - SEAT CUSHIONS |
BS EN ISO 11608-5:2012 | Needle-based injection systems for medical use. Requirements and test methods Automated functions |
09/30207531 DC : 0 | BS EN ISO 14534 - OPHTHALMIC OPTICS - CONTACT LENSES AND CONTACT LENS CARE PRODUCTS - FUNDAMENTAL REQUIREMENTS |
I.S. EN 62366-1:2015/AC:2015 | MEDICAL DEVICES - PART 1: APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES |
17/30338806 DC : 0 | BS EN ISO 25424 - STERILIZATION OF HEALTH CARE PRODUCTS - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
14/30296035 DC : 0 | BS ISO 29943-2 - CONDOMS - GUIDANCE ON CLINICAL STUDIES - PART 2: FEMALE CONDOMS, CLINICAL FUNCTION STUDIES BASED ON SELF-REPORTS |
PD ISO/TR 80002-2:2017 | Medical device software Validation of software for medical device quality systems |
AAMI ISO TIR 14969 : 2004 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003 |
AAMI ISO 81060-1:2007(R2013) | NON INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR NON-AUTOMATED MEASUREMENT TYPE |
BS EN ISO 5840-1:2015 | Cardiovascular implants. Cardiac valve prostheses General requirements |
15/30329923 DC : 0 | BS EN ISO 22610 - SURGICAL DRAPES, GOWNS AND CLEAN AIR SUITS, USED AS MEDICAL DEVICES, FOR PATIENTS, CLINICAL STAFF AND EQUIPMENT - TEST METHOD TO DETERMINE THE RESISTANCE TO WET BACTERIAL PENETRATION |
UNE-EN 16372:2015 | Aesthetic surgery services |
I.S. EN ISO 11607-2:2017 & LC:2017 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES (ISO 11607-2:2006, INCLUDING AMD 1:2014) |
ISO 16142-1:2016 | Medical devices — Recognized essential principles of safety and performance of medical devices — Part 1: General essential principles and additional specific essential principles for all non-IVD medical devices and guidance on the selection of standards |
16/30346835 DC : 0 | BS ISO 20789 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - PASSIVE HUMIDIFIERS |
ASTM E 3051 : 2016 | Standard Guide for Specification, Design, Verification, and Application of Single-Use Systems in Pharmaceutical and Biopharmaceutical Manufacturing |
03/317861 DC : DRAFT OCT 2003 | EN ISO 22523 - EXTERNAL LIMB PROSTHESES AND EXTERNAL ORTHOSES - REQUIREMENTS AND TEST METHODS |
AAMI IEC 62366 : 2015 | MEDICAL DEVICES - APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES |
ASTM F 2052 : 2015 : REDLINE | Standard Test Method for Measurement of Magnetically Induced Displacement Force on Medical Devices in the Magnetic Resonance Environment |
CSA IEC 62366 : 2014 | MEDICAL DEVICES - APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES |
12/30254927 DC : 0 | BS EN 16372 - AESTHETIC SURGERY SERVICES |
UNI EN ISO 20072 : 2013 | AEROSOL DRUG DELIVERY DEVICE DESIGN VERIFICATION - REQUIREMENTS AND TEST METHODS |
BS ISO 25539-1 : 2003 | CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 1: ENDOVASCULAR PROSTHESES |
BS ISO 16054 : 2000 AMD 14017 | IMPLANTS FOR SURGERY - MINIMUM DATA SETS FOR SURGICAL IMPLANTS |
UNE-EN ISO 13408-3:2011 | Aseptic processing of health care products - Part 3: Lyophilization (ISO 13408-3:2006) |
AAMI ISO 13408-1 : 2008 : R2011 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 1: GENERAL REQUIREMENTS |
AAMI ST72 : 2011 | BACTERIAL ENDOTOXIN - TEST METHODS, ROUTINE MONITORING AND ALTERNATIVES TO BATCH TESTING |
ASTM F 3302 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion |
AAMI/IEC TIR80002-3:2016 | MEDICAL DEVICE SOFTWARE - PART 3: PROCESS REFERENCE MODEL OF MEDICAL DEVICE SOFTWARE LIFE CYCLE PROCESSES (IEC 62304) |
07/30090385 DC : 0 | ISO 13408-1 - ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 1: GENERAL REQUIREMENTS |
UNE-EN ISO 5840-1:2016 | Cardiovascular implants - Cardiac valve prostheses - Part 1: General requirements (ISO 5840-1:2015) |
CSA Z11135-1 : 2009 : R2014 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
CSA ISO 14937 : 2011 : R2016 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
UNI EN 13795 : 2013 | SURGICAL DRAPES, GOWNS AND CLEAN AIR SUITS, USED AS MEDICAL DEVICES FOR PATIENTS, CLINICAL STAFF AND EQUIPMENT - GENERAL REQUIREMENTS FOR MANUFACTURERS, PROCESSORS AND PRODUCTS, TEST METHODS, PERFORMANCE REQUIREMENTS AND PERFORMANCE LEVELS |
CSA Z11137-2 : 2007 : R2012 : FR | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE |
ANSI/AAMI/ISO 22442-1:2016 | MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - PART 1: APPLICATION OF RISK MANAGEMENT |
DIN EN ISO 5840-2:2016-05 | Cardiovascular implants - Cardiac valve prostheses - Part 2: Surgically implanted heart valve substitutes (ISO 5840-2:2015) |
DIN ISO 13022:2014-06 | MEDICAL PRODUCTS CONTAINING VIABLE HUMAN CELLS - APPLICATION OF RISK MANAGEMENT AND REQUIREMENTS FOR PROCESSING PRACTICES (ISO 13022:2012) |
UNI EN ISO 11608-5 : 2013 | NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 5: AUTOMATED FUNCTIONS |
AAMI IEC 62304 : 2006 | MEDICAL DEVICE SOFTWARE - SOFTWARE LIFE CYCLE PROCESSES |
IEC TR 80002-1:2009 | Medical device software - Part 1: Guidance on the application of ISO 14971 to medical device software |
DIN EN ISO 5840-1:2015-12 | Cardiovascular implants - Cardiac valve prostheses - Part 1: General requirements (ISO 5840-1:2015) |
NFPA 1991 : 2016 | Standard on Vapor-Protective Ensembles for Hazardous Materials Emergencies |
IEC TR 80001-2-2:2012 | Application of risk management for IT-networks incorporating medical devices - Part 2-2: Guidance for the disclosure and communication of medical device security needs, risks and controls |
AAMI ISO 11607-2 : 2006 : R2010 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING, AND ASSEMBLY PROCESSES |
CSA Z17665-1:09 (R2019) | Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (Adopted ISO 17665-1:2006, first edition, 2006-08-15, with Canadian deviations) |
CSA Z17665-2:09 (R2019) | Sterilization of health care products — Moist heat — Part 2: Guidance on the application of ISO 17665-1 (ISO/TS 17665-2:2009, IDT) |
ISO 18362:2016 | Manufacture of cell-based health care products Control of microbial risks during processing |
ANSI/AAMI/ISO 5840-3:2013 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 3: HEART VALVE SUBSTITUTES IMPLANTED BY TRANSCATHETER TECHNIQUES |
AAMI ISO 25539-3 : 2011 | CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 3: VENA CAVA FILTERS |
CAN/CSA-ISO 11137-3:17 | Sterilization of health care products — Radiation — Part 3: Guidance on dosimetric aspects of development, validation and routine control (Adopted ISO 11137-3:2017, second edition, 2017-06) |
I.S. EN ISO 5840-2:2015 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 2: SURGICALLY IMPLANTED HEART VALVE SUBSTITUTES (ISO 5840-2:2015) |
I.S. EN ISO 13408-7:2015 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 7: ALTERNATIVE PROCESSES FOR MEDICAL DEVICES AND COMBINATION PRODUCTS (ISO 13408-7:2012) |
EN 13060:2014 | Small steam sterilizers |
ANSI/AAMI/ISO 11658:2012 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - BLOOD/TISSUE CONTACT SURFACE MODIFICATIONS FOR EXTRACORPOREAL PERFUSION SYSTEMS |
AAMI ISO 14937:2009 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
ANSI/AAMI ISO 17665-1:2006(R2013) | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
AAMI TIR48 : 2015 | QUALITY MANAGEMENT SYSTEM (QMS) RECOMMENDATIONS ON THE APPLICATION OF THE U.S. FDAS CGMP FINAL RULE ON COMBINATION PRODUCTS |
ANSI/AAMI/ISO 17664:2017 | PROCESSING OF HEALTH CARE PRODUCTS - INFORMATION TO BE PROVIDED BY THE MEDICAL DEVICE MANUFACTURER FOR THE PROCESSING OF MEDICAL DEVICES |
UNI CEN ISO/TS 11135-2 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 2: GUIDANCE ON THE APPLICATION OF ISO 11135-1 |
CSA Z17665-1 : 2009 : R2014 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
I.S. EN 62353:2014 | MEDICAL ELECTRICAL EQUIPMENT - RECURRENT TEST AND TEST AFTER REPAIR OF MEDICAL ELECTRICAL EQUIPMENT |
I.S. EN 15224:2016 | QUALITY MANAGEMENT SYSTEMS - EN ISO 9001:2015 FOR HEALTHCARE |
AAMI ISO 13408-2 : 2003 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 2: STERILIZING FILTRATION |
I.S. EN 60601-1:2006&A1:2013&AC:2014&A12:2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
ISO 11658:2012 | Cardiovascular implants and extracorporeal systems — Blood/tissue contact surface modifications for extracorporeal perfusion systems |
ISO 15675:2016 | Cardiovascular implants and artificial organs — Cardiopulmonary bypass systems — Arterial blood line filters |
AAMI ISO 11135-1 : 2007 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
IEC TR 60601-4-1:2017 | Medical electrical equipment - Part 4-1: Guidance and interpretation - Medical electrical equipment and medical electrical systems employing a degree of autonomy |
CSA Z5359 : 2016 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES, MEDICAL VACUUM, MEDICAL SUPPORT GASES, AND ANAESTHETIC GAS SCAVENGING SYSTEMS |
BS EN ISO 5359 : 2014 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES |
I.S. EN ISO 13408-3:2011 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 3: LYOPHILIZATION |
DIN EN ISO 7396-1:2016-09 | MEDICAL GAS PIPELINE SYSTEMS - PART 1: PIPELINE SYSTEMS FOR COMPRESSED MEDICAL GASES AND VACUUM (ISO 7396-1:2016) |
AAMI ST15883-1 : 2009 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
I.S. EN ISO 25539-3:2011 | CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 3: VENA CAVA FILTERS (ISO 25539-3:2011) |
CEN/TR 15640:2007 | Health informatics - Measures for ensuring the patient safety of health software |
CEN/CLC/TR 14060:2014 | Medical device traceability enabled by unique device identification (UDI) |
I.S. EN ISO 80601-2-13:2012 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AN ANAESTHETIC WORKSTATION (ISO 80601-2-13:2011) |
UNI EN ISO 25539-3 : 2012 | CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 3: VENA CAVA FILTERS |
UNI EN ISO 13408-3 : 2011 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 3: LYOPHILIZATION |
ASTM F 2257 : 2014 : REDLINE | Standard Specification for Wrought Seamless or Welded and Drawn 18 Chromium-14Nickel-2.5Molybdenum Stainless Steel Small Diameter Tubing for Surgical Implants (UNS S31673) |
ASTM F 2943 : 2014 : REDLINE | Standard Guide for Presentation of End User Labeling Information for Musculoskeletal Implants |
ISO 11737-2:2009 | Sterilization of medical devices Microbiological methods Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process |
EN 16844:2017 | Aesthetic medicine services - Non-surgical medical treatments |
BS EN ISO 11607-1:2017 | Packaging for terminally sterilized medical devices Requirements for materials, sterile barrier systems and packaging systems |
BS EN ISO 11137-1:2015 | Sterilization of health care products. Radiation Requirements for development, validation and routine control of a sterilization process for medical devices |
BS EN ISO 14971:2012 | Medical devices. Application of risk management to medical devices |
IEC TR 80002-3:2014 | Medical device software - Part 3: Process reference model of medical device software life cycle processes (IEC 62304) |
I.S. EN ISO 17664:2017 | PROCESSING OF HEALTH CARE PRODUCTS - INFORMATION TO BE PROVIDED BY THE MEDICAL DEVICE MANUFACTURER FOR THE PROCESSING OF MEDICAL DEVICES (ISO 17664:2017) |
I.S. EN 62304:2006 | MEDICAL DEVICE SOFTWARE - SOFTWARE LIFE-CYCLE PROCESSES |
ISO 17664:2017 | Processing of health care products Information to be provided by the medical device manufacturer for the processing of medical devices |
DIN EN ISO 22523:2007-04 | External limb prostheses and external orthoses - Requirements and test methods (ISO 22523:2006) |
DIN EN 13060:2015-03 | SMALL STEAM STERILIZERS |
DIN EN 285:2016-05 | Sterilization - Steam sterilizers - Large sterilizers |
DIN EN ISO 10993-1:2010-04 | Biological evaluation of medical devices - Part 1: Evaluation and testing within a risk management system (ISO 10993-1:2009) |
DIN EN ISO 11608-1:2015-04 | Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO 11608-1:2014) |
UNE-EN ISO 11140-1:2015 | Sterilization of health care products - Chemical indicators - Part 1: General requirements (ISO 11140-1:2014) |
BS EN ISO 21649:2009 | Needle-free injectors for medical use. Requirements and test methods |
BS EN ISO 23747:2015 | Anaesthetic and respiratory equipment. Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans |
ISO 15197:2013 | In vitro diagnostic test systems — Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus |
BS EN ISO 22610:2006 | Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment. Test method to determine the resistance to wet bacterial penetration |
ISO 5840:2005 | Cardiovascular implants Cardiac valve prostheses |
ISO 15883-1:2006 | Washer-disinfectors Part 1: General requirements, terms and definitions and tests |
UNE-EN ISO 26782:2010 | Anaesthetic and respiratory equipment - Spirometers intended for the measurement of time forced expired volumes in humans (ISO 26782:2009) |
ISO 14155:2011 | Clinical investigation of medical devices for human subjects Good clinical practice |
ISO 21649:2006 | Needle-free injectors for medical use — Requirements and test methods |
UNE-EN ISO 14160:2012 | Sterilization of health care products - Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives - Requirements for characterization, development, validation and routine control of a sterilization process for medical devices (ISO 14160:2011) |
04/30106146 DC : DRAFT MARCH 2004 | BS EN 60601-1 - MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
BS EN ISO 15197:2015 | In vitro diagnostic test systems. Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus |
DIN EN ISO 22610:2006-10 | Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment - Test method to determine the resistance to wet bacterial penetration (ISO 22610:2006) |
I.S. EN ISO 14161:2009 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
I.S. EN ISO 11737-2:2009 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS |
UNE-EN 60601-1:2008 | Medical electrical equipment -- Part 1: General requirements for basic safety and essential performance |
EN ISO 14161:2009 | Sterilization of health care products - Biological indicators - Guidance for the selection, use and interpretation of results (ISO 14161:2009) |
EN 62366-1:2015/AC:2015 | MEDICAL DEVICES - PART 1: APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES (IEC 62366-1:2015) |
EN ISO 25539-2:2012 | Cardiovascular implants - Endovascular devices - Part 2: Vascular stents (ISO 25539-2:2012) |
I.S. EN ISO 15883-1:2009 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006) |
EN ISO 22610:2006 | Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment - Test method to determine the resistance to wet bacterial penetration (ISO 22610:2006) |
EN 13795-1:2002+A1:2009 | Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment - Part 1: General requirements for manufacturers, processors and products |
EN ISO 18113-1:2011 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009) |
UNI EN ISO 5840 : 2009 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES |
UNI EN ISO 10451 : 2010 | DENTISTRY - CONTENTS OF TECHNICAL FILE FOR DENTAL IMPLANT SYSTEMS |
EN 45502-1:2015 | IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND FOR INFORMATION TO BE PROVIDED BY THE MANUFACTURER |
UNI EN ISO 15883-1 : 2014 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
UNI EN ISO 14937 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
UNI EN ISO 11608-3 : 2013 | NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 3: FINISHED CONTAINERS |
UNI CEI EN 45502-2-3 : 2010 | ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-3: PARTICULAR REQUIREMENTS FOR COCHLEAR AND AUDITORY BRAINSTEM IMPLANT SYSTEMS |
UNI EN ISO 14161 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
UNI EN 14180 : 2014 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
UNI EN 1422 : 2014 | STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS |
UNI EN ISO 14630 : 2013 | NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS |
UNI EN ISO 11980 : 2013 | OPHTHALMIC OPTICS - CONTACT LENSES AND CONTACT LENS CARE PRODUCTS - GUIDANCE FOR CLINICAL INVESTIGATIONS |
AAMI ISO 11607-1 : 2006 : R2010 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS, AND PACKAGING SYSTEMS |
DIN EN ISO 13504:2012-10 | DENTISTRY - GENERAL REQUIREMENTS FOR INSTRUMENTS AND RELATED ACCESSORIES USED IN DENTAL IMPLANT PLACEMENT AND TREATMENT (ISO 13504:2012) |
CSA ISO 11607-1 : 2016 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS |
ISO 16971:2015 | Ophthalmic instruments Optical coherence tomograph for the posterior segment of the human eye |
BS EN ISO 25539-2:2012 | Cardiovascular implants. Endovascular devices Vascular stents |
UNE-EN ISO 12870:2014 | Ophthalmic optics - Spectacle frames - Requirements and test methods (ISO 12870:2012) |
ISO 18746:2016 | Traditional Chinese medicine — Sterile intradermal acupuncture needles for single use |
UNI EN ISO 10993-1 : 2010 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 1: EVALUATION AND TESTING WITHIN A RISK MANAGEMENT PROCESS |
BS EN ISO 15194:2009 | In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Requirements for certified reference materials and the content of supporting documentation |
DIN EN ISO 20072:2013-10 | AEROSOL DRUG DELIVERY DEVICE DESIGN VERIFICATION - REQUIREMENTS AND TEST METHODS (ISO 20072:2009) |
PREN ISO 14160 : DRAFT 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
DIN EN 13795:2013-10 | SURGICAL DRAPES, GOWNS AND CLEAN AIR SUITS, USED AS MEDICAL DEVICES FOR PATIENTS, CLINICAL STAFF AND EQUIPMENT - GENERAL REQUIREMENTS FOR MANUFACTURERS, PROCESSORS AND PRODUCTS, TEST METHODS, PERFORMANCE REQUIREMENTS AND PERFORMANCE LEVELS |
BS EN ISO 25424:2011 | Sterilization of medical devices. Low temperature steam and formaldehyde. Requirements for development, validation and routine control of a sterilization process for medical devices |
PREN 17180 : DRAFT 2017 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE VAPORIZED HYDROGEN PEROXIDE STERILIZERS - REQUIREMENTS AND TESTING |
AAMI TIR36 : 2007 | VALIDATION OF SOFTWARE FOR REGULATED PROCESSES |
14/30244508 DC : 0 | BS EN 62366-1 - MEDICAL DEVICES - PART 1: APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES |
CSA Z11137-3 : 2007 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS |
BS EN ISO 13408-3:2011 | Aseptic processing of health care products Lyophilization |
BS ISO 17218:2014 | Sterile acupuncture needles for single use |
AAMI/IEC TIR80002-1:2009 | MEDICAL DEVICE SOFTWARE - PART 1: GUIDANCE ON THE APPLICATION OF ISO 14971 TO MEDICAL DEVICE SOFTWARE |
08/30192448 DC : DRAFT DEC 2008 | BS ISO 14708-5 - IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 5: CIRCULATORY SUPPORT DEVICES |
UNI EN ISO 21649 : 2009 | NEEDLE-FREE INJECTORS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS |
13/30250915 DC : 0 | BS EN 62353 - MEDICAL ELECTRICAL EQUIPMENT - RECURRENT TEST AND TEST AFTER REPAIR OF MEDICAL ELECTRICAL EQUIPMENT |
DIN EN ISO 15194:2009-10 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
BS ISO 8009:2014 | Mechanical contraceptives. Reusable natural and silicone rubber contraceptive diaphragms. Requirements and tests |
UNI EN ISO 11135 : 2014 | STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
AAMI ISO 11737-1 : 2006 | STERILIZATION OF MEDICAL DEVICES - MEDICAL DEVICES - PART 1: DETERMINATION OF THE POPULATION OF MICROORGANISMS ON PRODUCT |
11/30243761 DC : 0 | BS ISO 14708-7 - IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 7: PARTICULAR REQUIREMENTS FOR COCHLEAR IMPLANT SYSTEMS |
I.S. EN 556-2:2015 | STERILIZATION OF MEDICAL DEVICES - REQUIREMENTS FOR MEDICAL DEVICES TO BE DESIGNATED 'STERILE' - PART 2: REQUIREMENTS FOR ASEPTICALLY PROCESSED MEDICAL DEVICES |
BS EN ISO 13504:2012 | Dentistry. General requirements for instruments and related accessories used in dental implant placement and treatment |
ISO 11607-2:2006 | Packaging for terminally sterilized medical devices Part 2: Validation requirements for forming, sealing and assembly processes |
AAMI ISO TIR 17665-2 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF ANSI/AAMI/ISO 17665-1 |
PD IEC/TR 80002-3:2014 | Medical device software Process reference model of medical device software life cycle processes (IEC 62304) |
I.S. CEN ISO TR 14969:2005 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485: 2003 |
13/30283636 DC : 0 | BS ISO 13179-1 - IMPLANTS FOR SURGERY - PLASMA-SPRAYED UNALLOYED TITANIUM COATINGS ON SURGICAL IMPLANTS - PART 1: GENERAL REQUIREMENTS |
PD IEC/TR 80001-2-2:2012 | Application of risk management for IT-networks incorporating medical devices Guidance for the disclosure and communication of medical device security needs, risks and controls |
11/30219211 DC : 0 | BS EN ISO 5840-3 - CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 3: HEART VALVE SUBSTITUTES IMPLANTED BY MINIMALLY INVASIVE TECHNIQUES |
CEI UNI EN ISO 14971 : 2013 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
I.S. EN ISO 11135-1:2007 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
16/30334735 DC : 0 | BS EN 15224 - HEALTH CARE SERVICES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS BASED ON EN ISO 9001:2015 |
UNE-EN ISO 20857:2013 | Sterilization of health care products - Dry heat - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 20857:2010) |
04/30048584 DC : DRAFT MAY 2004 | BS EN ISO 11137-2 - STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE |
I.S. EN ISO 20857:2013 | STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 20857:2010) |
07/30157023 DC : 0 | BS EN ISO 15194 - IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
09/30180393 DC : 0 | BS EN ISO 10451 - DENTISTRY - CONTENTS OF TECHNICAL FILE FOR DENTAL IMPLANT SYSTEMS |
11/30208525 DC : 0 | BS EN ISO 15197 - IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE MONITORING SYSTEMS FOR SELF-TESTING IN MANAGING DIABETES MELLITUS |
13/30259011 DC : 0 | BS ISO 17218 - STERILE ACUPUNCTURE NEEDLES FOR SINGLE USE |
PD ISO/TR 15499:2016 | Biological evaluation of medical devices. Guidance on the conduct of biological evaluation within a risk management process |
14/30302761 DC : 0 | BS ISO 11249 - MECHANICAL CONTRACEPTIVES - GUIDANCE FOR CLINICAL EVALUATION OF INTRA-UTERINE CONTRACEPTIVE DEVICES (IUDS) |
14/30290166 DC : 0 | BS ISO 16142-1 - MEDICAL DEVICES - RECOGNIZED ESSENTIAL PRINCIPLES OF SAFETY AND PERFORMANCE OF MEDICAL DEVICES - PART 1: GENERAL ESSENTIAL PRINCIPLES AND ADDITIONAL SPECIFIC ESSENTIAL PRINCIPLES FOR ALL NON-IVD MEDICAL DEVICES AND GUIDANCE ON THE SELECTION OF STANDARDS |
13/30233325 DC : 0 | BS EN 45502-1 - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND INFORMATION TO BE PROVIDED BY THE MANUFACTURER |
17/30302489 DC : DRAFT MAR 2017 | BS EN ISO 13408-2 - ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 2: STERILIZING FILTRATION |
UNI EN ISO 13504 : 2012 | DENTISTRY - GENERAL REQUIREMENTS FOR INSTRUMENTS AND RELATED ACCESSORIES USED IN DENTAL IMPLANT PLACEMENT AND TREATMENT |
UNI CEI EN 1041 : 2013 | INFORMATION SUPPLIED BY THE MANUFACTURER OF MEDICAL DEVICES |
17/30302770 DC : 0 | BS ISO 13779-3 - IMPLANTS FOR SURGERY - HYDROXYAPATITE - PART 3: CHEMICAL ANALYSIS AND CHARACTERIZATION OF CRYSTALLINITY RATIO AND PHASE PURITY |
09/30157765 DC : 0 | BS EN ISO 14160 REV - STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
DIN EN ISO 7198:2017-07 | Cardiovascular implants and extracorporeal systems - Vascular prostheses - Tubular vascular grafts and vascular patches (ISO 7198:2016) |
BS EN ISO 15378:2017 | Primary packaging materials for medicinal products. Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) |
I.S. EN ISO 18113-1:2011 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS (ISO 18113-1:2009) |
14/30289934 DC : 0 | BS ISO 18385 - MINIMIZING THE RISK OF DNA CONTAMINATION IN PRODUCTS USED TO COLLECT AND ANALYSE BIOLOGICAL MATERIAL FOR FORENSIC PURPOSES |
07/30164697 DC : 0 | ISO 20857 - STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF AN INDUSTRIAL STERILIZATION PROCESS FOR MEDICAL DEVICES |
BS EN ISO 11073-00103:2017 | Health informatics. Personal health device communication Overview |
03/314215 DC : DRAFT OCT 2003 | ISO TR 14969 - MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003 |
PD CEN/TR 15253:2005 | Health informatics. Quality of service requirements for health information interchange |
12/30244415 DC : DRAFT APR 2012 | BS ISO 27427 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - NEBULIZING SYSTEMS AND COMPONENTS |
06/30146511 DC : 0 | BS ISO 18113-1 - CLINICAL LABORATORY TESTING AND IN VITRO DIAGNOSTIC MEDICAL SYSTEMS - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS |
PD IEC/TR 80002-1:2009 | Medical device software Guidance on the application of ISO 14971 to medical device software |
UNI CEI EN ISO 14971 : 2012 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
10/30208681 DC : DRAFT SEP 2010 | BS ISO/IEC GUIDE 63 - GUIDE TO THE DEVELOPMENT AND INCLUSION OF SAFETY ASPECTS IN INTERNATIONAL STANDARDS FOR MEDICAL DEVICES |
07/30145258 DC : 0 | BS ISO 20072 - AEROSOL DRUG DELIVERY DEVICES DESIGN VERIFICATION - REQUIREMENTS AND TEST METHODS |
CSA Z11138-1 : 2007 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 1: GENERAL REQUIREMENTS |
CSA ISO 27427 : 2014 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - NEBULIZING SYSTEMS AND COMPONENTS |
ISO 29943-2:2017 | Condoms — Guidance on clinical studies — Part 2: Female condoms, clinical function studies based on self-reports |
CSA ISO TR 14969 : 2005 : R2015 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003 |
09/30197784 DC : 0 | BS EN ISO 11137-2 - STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE |
CSA Z11140.1 : 2007 : R2012 : FR | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 1: GENERAL REQUIREMENTS |
ANSI/AAMI/ISO 14160:2011(R2016) | STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
EN ISO 14160:2011 | Sterilization of health care products - Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives - Requirements for characterization, development, validation and routine control of a sterilization process for medical devices (ISO 14160:2011) |
CSA Z11135-2 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 2: GUIDANCE ON THE APPLICATION OF ISO 11135-1 |
ASTM F 2820 : 2012 | Standard Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications |
UNI EN ISO 25539-2 : 2013 | CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 2: VASCULAR STENTS |
CSA Z11138-1 : 2007 : R2016 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 1: GENERAL REQUIREMENTS |
UNI EN ISO 20857 : 2013 | STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
DIN EN ISO 25539-2:2013-05 | Cardiovascular implants - Endovascular devices - Part 2: Vascular stents (ISO 25539-2:2012) |
AAMI ISO 13408-1:2008 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 1: GENERAL REQUIREMENTS |
CSA ISO TR 14969 :2005 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003 |
AAMI ISO 12417-1 : 2015 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - VASCULAR DEVICE-DRUG COMBINATION PRODUCTS - PART 1: GENERAL REQUIREMENTS |
CSA Z11140.1 : 2007 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 1: GENERAL REQUIREMENTS |
CSA Z11135-1 : 2009 : FR | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
UNE-EN ISO 22442-2:2016 | Medical devices utilizing animal tissues and their derivatives - Part 2: Controls on sourcing, collection and handling (ISO 22442-2:2015) |
UNE-EN ISO 11135:2015 | Sterilization of health-care products - Ethylene oxide - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 11135:2014) |
DIN EN ISO 20857:2013-08 | Sterilization of health care products - Dry heat - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 20857:2010) |
BS EN ISO 11135:2014 | Sterilization of health-care products. Ethylene oxide. Requirements for the development, validation and routine control of a sterilization process for medical devices |
BS EN ISO 17664:2017 | Processing of health care products. Information to be provided by the medical device manufacturer for the processing of medical devices |
I.S. EN ISO 11608-5:2012 | NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 5: AUTOMATED FUNCTIONS (ISO 11608-5:2012) |
AAMI ISO 14971 : 2007 : R2010 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
CSA ISO 11137-2 : 2016 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE |
AAMI ISO 14161 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE, AND INTERPRETATION OF RESULTS |
ISO 25841:2017 | Female condoms — Requirements and test methods |
IEEE 730-2014 REDLINE | IEEE Standard for Software Quality Assurance Processes |
CSA ISO 11607-2 : 2016 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES |
I.S. EN ISO 25539-1:2017 | CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 1: ENDOVASCULAR PROSTHESES (ISO 25539-1:2017) |
AAMI/ISO TIR17665-2:2009(R2016) | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF ANSI/AAMI/ISO 17665-1 |
ANSI/AAMI/ISO 13408-7:2012(R2018) | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 7: ALTERNATIVE PROCESSES FOR MEDICAL DEVICES AND COMBINATION PRODUCTS |
ANSI/AAMI/ISO 14708-1:2014 | IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND FOR INFORMATION TO BE PROVIDED BY THE MANUFACTURER |
PREN 15224 : DRAFT 2016 | HEALTH CARE SERVICES - QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS BASED ON EN ISO 9001:2015 |
I.S. EN ISO 11607-1:2017 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS (ISO 11607-1:2006, INCLUDING AMD 1:2014) |
ISO/TR 14969:2004 | Medical devices Quality management systems Guidance on the application of ISO 13485: 2003 |
CSA CEI/IEC 62304:14 (R2019) | Medical device software - Software life cycle processes (Adopted CEI/IEC 62304:2006, first edition, 2006-05) | Logiciels de dispositifs médicaux - Processus du cycle de vie du logiciel (norme CEI/IEC 62304:2006 adoptée, première édition, 2006-05) |
ISO 17218:2014 | Sterile acupuncture needles for single use |
DIN EN ISO 5359:2015-02 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES (ISO 5359:2014) |
UNI EN ISO 11607-1 : 2014 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS |
ASTM F 3091/F3091M : 2014 | Standard Specification for Powder Bed Fusion of Plastic Materials |
ASTM F 648 : 2014 : REDLINE | Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants |
ASTM F 3001 : 2014 : REDLINE | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) with Powder Bed Fusion |
AAMI ISO 26782 : 2015 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - SPIROMETERS INTENDED FOR THE MEASUREMENT OF TIME FORCED EXPIRED VOLUMES IN HUMANS |
UNE-EN 13060:2015 | Small steam sterilizers |
ASTM F 3160 : 2016 | Standard Guide for Metallurgical Characterization of Absorbable Metallic Materials for Medical Implants |
UNE-EN ISO 7396-1:2016 | Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO 7396-1:2016) |
EN ISO 14971:2012 | Medical devices - Application of risk management to medical devices (ISO 14971:2007, Corrected version 2007-10-01) |
ISO 13779-6:2015 | Implants for surgery Hydroxyapatite Part 6: Powders |
ISO/TR 22979:2017 | Ophthalmic implants — Intraocular lenses — Guidance on assessment of the need for clinical investigation of intraocular lens design modifications |
ISO 15674:2016 | Cardiovascular implants and artificial organs — Hard-shell cardiotomy/venous reservoir systems (with/without filter) and soft venous reservoir bags |
CEN/TR 17223:2018 | Guidance on the relationship between EN ISO 13485: 2016 (Medical devices - Quality management systems - Requirements for regulatory purposes) and European Medical Devices Regulation and In Vitro Diagnostic Medical Devices Regulation |
ISO 13022:2012 | Medical products containing viable human cells — Application of risk management and requirements for processing practices |
ISO 7396-1:2016 | Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum |
I.S. EN ISO 15378:2017 | PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2015, WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP) (ISO 15378:2017) |
ISO 8009:2014 | Mechanical contraceptives — Reusable natural and silicone rubber contraceptive diaphragms — Requirements and tests |
ISO/TS 13409:2002 | Sterilization of health care products Radiation sterilization Substantiation of 25 kGy as a sterilization dose for small or infrequent production batches |
I.S. EN ISO 16061:2015 | INSTRUMENTATION FOR USE IN ASSOCIATION WITH NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS (ISO 16061:2015) |
UNE-EN ISO 15883-1:2009 | Washer-disinfectors - Part 1: General requirements, terms and definitions and tests (ISO 15883-1:2006) |
BS EN ISO 11607-1:2020 | Packaging for terminally sterilized medical devices Requirements for materials, sterile barrier systems and packaging systems |
DIN EN ISO 15197:2015-12 | IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE MONITORING SYSTEMS FOR SELF-TESTING IN MANAGING DIABETES MELLITUS (ISO 15197:2013) |
DIN EN ISO 14630:2013-03 | Non-active surgical implants - General requirements (ISO 14630:2012) |
DIN EN 14180:2014-09 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
DIN EN ISO 14160:2011-10 | Sterilization of health care products - Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives - Requirements for characterization, development, validation and routine control of a sterilization process for medical devices (ISO 14160:2011) |
DIN EN ISO 14161:2010-03 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
DIN EN ISO 14534:2015-08 | Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements (ISO 14534:2011) |
ISO 13504:2012 | Dentistry — General requirements for instruments and related accessories used in dental implant placement and treatment |
BS EN 60601-1 : 2006 | MEDICAL ELECTRICAL EQUIPMENT PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
ISO 22442-2:2015 | Medical devices utilizing animal tissues and their derivatives Part 2: Controls on sourcing, collection and handling |
BS EN 13612:2002 | Performance evaluation of in vitro diagnostic medical devices |
BS EN ISO 22442-3:2007 | Medical devices utilizing animal tissues and their derivatives Validation of the elimination and/or inactivation of viruses and transmissible spongiform encephalopathy (TSE) agents |
UNE-EN 556-2:2016 | Sterilization of medical devices - Requirements for medical devices to be designated 'STERILE" - Part 2: Requirements for aseptically processed medical devices |
ISO 14727:1998 | Dental implants Prefabricated parts connecting suprastructures to dental implants Contents of technical file |
IEC 60601-1:2005+AMD1:2012 CSV | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance |
ISO 20857:2010 | Sterilization of health care products Dry heat Requirements for the development, validation and routine control of a sterilization process for medical devices |
ISO 16061:2015 | Instrumentation for use in association with non-active surgical implants General requirements |
ISO 26782:2009 | Anaesthetic and respiratory equipment — Spirometers intended for the measurement of time forced expired volumes in humans |
ISO 11138-1:2017 | Sterilization of health care products — Biological indicators — Part 1: General requirements |
ISO 22610:2006 | Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment Test method to determine the resistance to wet bacterial penetration |
EN ISO 11737-2:2009 | Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process (ISO 11737-2:2009) |
UNE-EN 13795:2011 | Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment - General requirements for manufacturers, processors and products, test methods, performance requirements and performance levels |
BS EN ISO 17665-1:2006 | Sterilization of health care products. Moist heat Requirements for the development, validation and routine control of a sterilization process for medical devices |
BS EN ISO 14937:2009 | Sterilization of health care products. General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices |
ISO 22442-1:2015 | Medical devices utilizing animal tissues and their derivatives Part 1: Application of risk management |
BS EN ISO 11608-3:2012 | Needle-based injection systems for medical use. Requirements and test methods Finished containers |
ISO 20072:2009 | Aerosol drug delivery device design verification Requirements and test methods |
UNE-EN ISO 4074:2016 | Natural rubber latex male condoms - Requirements and test methods (ISO 4074:2015) |
BS EN ISO 14727:1999 | Dental implants. Prefabricated parts connecting suprastructures to dental implants. Contents of technical file |
UNE-EN ISO 11138-1:2017 | Sterilization of health care products - Biological indicators - Part 1: General requirements (ISO 11138-1:2017) |
UNE-EN 1041:2009 | Information supplied by the manufacturer of medical devices |
ISO 5840-3:2013 | Cardiovascular implants Cardiac valve prostheses Part 3: Heart valve substitutes implanted by transcatheter techniques |
UNE-EN ISO 11137-1:2015 | Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11137-1:2006, including Amd 1:2013) |
00/565497 DC : DRAFT DEC 2000 | BS IEC 60601-1 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR SAFETY AND ESSENTIAL PERFORMANCE |
ISO 17665-1:2006 | Sterilization of health care products — Moist heat — Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices |
ISO 25539-2:2012 | Cardiovascular implants Endovascular devices Part 2: Vascular stents |
BS EN 13060 : 2014 | SMALL STEAM STERILIZERS |
ISO 22442-3:2007 | Medical devices utilizing animal tissues and their derivatives — Part 3: Validation of the elimination and/or inactivation of viruses and transmissible spongiform encephalopathy (TSE) agents |
ISO 14534:2011 | Ophthalmic optics Contact lenses and contact lens care products Fundamental requirements |
UNE-EN ISO 14534:2015 | Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements (ISO 14534:2011) |
BS EN 285:2015 | Sterilization. Steam sterilizers. Large sterilizers |
I.S. EN ISO 10993-1:2009+AC:2010 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 1: EVALUATION AND TESTING WITHIN A RISK MANAGEMENT PROCESS (ISO 10993-1:2009) |
ISO/TS 11135-2:2008 | Sterilization of health care products Ethylene oxide Part 2: Guidance on the application of ISO 11135-1 |
ISO 11980:2012 | Ophthalmic optics — Contact lenses and contact lens care products — Guidance for clinical investigations |
BS EN 1041 : 2008 | INFORMATION SUPPLIED BY THE MANUFACTURER OF MEDICAL DEVICES |
ISO 18113-1:2009 | In vitro diagnostic medical devices — Information supplied by the manufacturer (labelling) — Part 1: Terms, definitions and general requirements |
ISO 23747:2015 | Anaesthetic and respiratory equipment Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans |
ISO 13408-7:2012 | Aseptic processing of health care products — Part 7: Alternative processes for medical devices and combination products |
ISO 22523:2006 | External limb prostheses and external orthoses — Requirements and test methods |
ISO 80601-2-13:2011 | Medical electrical equipment Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation |
ISO 5840-2:2015 | Cardiovascular implants Cardiac valve prostheses Part 2: Surgically implanted heart valve substitutes |
ISO 13408-3:2006 | Aseptic processing of health care products Part 3: Lyophilization |
ISO 11608-1:2014 | Needle-based injection systems for medical use Requirements and test methods Part 1: Needle-based injection systems |
UNE-EN ISO 14937:2010 | Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009) |
UNE-EN ISO 14630:2013 | Non-active surgical implants - General requirements (ISO 14630:2012) |
BS EN 14180:2014 | Sterilizers for medical purposes. Low temperature steam and formaldehyde sterilizers. Requirements and testing |
UNE-EN 45502-2-3:2010 | Active implantable medical devices -- Part 2-3: Particular requirements for cochlear and auditory brainstem implant systems |
BS EN ISO 5840:2009 | Cardiovascular implants. Cardiac valve prostheses |
BS EN ISO 10451:2010 | Dentistry. Contents of technical file for dental implant systems |
ISO 12417-1:2015 | Cardiovascular implants and extracorporeal systems — Vascular device-drug combination products — Part 1: General requirements |
ISO 4074:2015 | Natural rubber latex male condoms Requirements and test methods |
ISO 11137-3:2017 | Sterilization of health care products — Radiation — Part 3: Guidance on dosimetric aspects of development, validation and routine control |
BS EN ISO 16054:2002 | Implants for surgery. Minimum data sets for surgical implants |
BS EN ISO 15883-1 : 2009 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006) |
ISO 10451:2010 | Dentistry — Contents of technical file for dental implant systems |
UNI EN ISO 80601-2-13 : 2013 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AN ANAESTHETIC WORKSTATION |
ISO 11608-3:2012 | Needle-based injection systems for medical use Requirements and test methods Part 3: Finished containers |
I.S. EN 13795-1:2002 | SURGICAL DRAPES, GOWNS AND CLEAN AIR SUITS, USED AS MEDICAL DEVICES, FOR PATIENTS, CLINICAL STAFF AND EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR MANUFACTURERS, PROCESSORS AND PRODUCTS |
EN 16372:2014 | Aesthetic surgery services |
EN ISO 11073-00103:2017 | Health informatics - Personal health device communication - Part 00103: Overview (ISO/IEEE 11073-00103:2015) |
EN 15424:2007 | Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices |
EN ISO 11135-1:2007 | Sterilization of health care products - Ethylene oxide - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11135-1:2007) |
EN ISO 11138-1:2017 | Sterilization of health care products - Biological indicators - Part 1: General requirements (ISO 11138-1:2017) |
EN ISO 13408-1:2015 | Aseptic processing of health care products - Part 1: General requirements (ISO 13408-1:2008, including Amd 1:2013) |
EN ISO 21649:2009 | Needle-free injectors for medical use - Requirements and test methods (ISO 21649:2006) |
EN ISO 11137-1:2015 | Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11137-1:2006, including Amd 1:2013) |
EN ISO 7198:2017 | Cardiovascular implants and extracorporeal systems - Vascular prostheses - Tubular vascular grafts and vascular patches (ISO 7198:2016) |
EN ISO 15197:2015 | In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (ISO 15197:2013) |
EN 13795:2011+A1:2013 | Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment - General requirements for manufacturers, processors and products, test methods, performance requirements and performance levels |
EN ISO 14727:1998/AC:1998 | DENTAL IMPLANTS - PREFABRICATED PARTS CONNECTING SUPRASTRUCTURES TO DENTAL IMPLANTS - CONTENTS OF TECHNICAL FILE |
EN 45502-2-3:2010 | Active implantable medical devices - Part 2-3: Particular requirements for cochlear and auditory brainstem implant systems |
EN ISO 25424:2011 | Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 25424:2009) |
EN ISO 11608-5:2012 | Needle-based injection systems for medical use - Requirements and test methods - Part 5: Automated functions (ISO 11608-5:2012) |
EN 556-2:2015 | Sterilization of medical devices - Requirements for medical devices to be designated 'STERILE" - Part 2: Requirements for aseptically processed medical devices |
EN ISO 10451:2010 | Dentistry - Contents of technical file for dental implant systems (ISO 10451:2010) |
EN ISO 11137-3:2017 | Sterilization of health care products - Radiation - Part 3: Guidance on dosimetric aspects of development, validation and routine control (ISO 11137-3:2017) |
EN 1422:2014 | Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and test methods |
EN ISO 11980:2012 | Ophthalmic optics - Contact lenses and contact lens care products - Guidance for clinical investigations (ISO 11980:2012) |
EN ISO 20072:2013 | Aerosol drug delivery device design verification - Requirements and test methods (ISO 20072:2009) |
EN ISO 20857:2013 | Sterilization of health care products - Dry heat - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 20857:2010) |
EN ISO 15194:2009 | In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for certified reference materials and the content of supporting documentation (ISO 15194:2009) |
EN ISO 14534:2015 | Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements (ISO 14534:2011) |
EN ISO 11608-1:2015 | Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO 11608-1:2014) |
EN 14180:2014 | Sterilizers for medical purposes - Low temperature steam and formaldehyde sterilizers - Requirements and testing |
EN ISO 17665-1:2006 | Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 17665-1:2006) |
EN ISO 11608-3:2012 | Needle-based injection systems for medical use - Requirements and test methods - Part 3: Finished containers (ISO 11608-3:2012) |
EN ISO 11137-2:2015 | Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose (ISO 11137-2:2013) |
EN ISO 16054:2002 | Implants for surgery - Minimum data sets for surgical implants (ISO 16054:2000) |
EN ISO 14630:2012 | Non-active surgical implants - General requirements (ISO 14630:2012) |
EN ISO 12417-1:2015 | Cardiovascular implants and extracorporeal systems - Vascular device-drug combination products - Part 1: General requirements (ISO 12417-1:2015) |
EN ISO 13408-7:2015 | Aseptic processing of health care products - Part 7: Alternative processes for medical devices and combination products (ISO 13408-7:2012) |
EN ISO 4074:2015 | Natural rubber latex male condoms - Requirements and test methods (ISO 4074:2015) |
EN ISO 13408-3:2011 | Aseptic processing of health care products - Part 3: Lyophilization (ISO 13408-3:2006) |
EN ISO 23747:2015 | Anaesthetic and respiratory equipment - Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans (ISO 23747:2015) |
EN ISO 13504:2012 | Dentistry - General requirements for instruments and related accessories used in dental implant placement and treatment (ISO 13504:2012) |
EN 16224:2012+A1:2014 | Healthcare provision by chiropractors |
EN 13824 : 2004 | STERILIZATION OF MEDICAL DEVICES - ASEPTIC PROCESSING OF LIQUID MEDICAL DEVICES - REQUIREMENTS |
BS EN ISO 16061:2015 | Instrumentation for use in association with non-active surgical implants. General requirements |
AAMI ISO TIR 12417 : 2011 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - VASCULAR DEVICE-DRUG COMBINATION PRODUCTS |
DIN EN ISO 81060-1:2012-08 | Non-invasive sphygmomanometers - Part 1: Requirements and test methods for non-automated measurement type (ISO 81060-1:2007) |
ISO 14708-1:2014 | Implants for surgery — Active implantable medical devices — Part 1: General requirements for safety, marking and for information to be provided by the manufacturer |
ISO/TR 16142:2006 | Medical devices Guidance on the selection of standards in support of recognized essential principles of safety and performance of medical devices |
CEN/TR 15253 : 2005 | HEALTH INFORMATICS - QUALITY OF SERVICE REQUIREMENTS FOR HEALTH INFORMATION INTERCHANGE |
I.S. EN ISO 5359:2014 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES (ISO 5359:2014) |
BS EN ISO 20857:2013 | Sterilization of health care products. Dry heat. Requirements for the development, validation and routine control of a sterilization process for medical devices |
BS ISO 13408-7 : 2012 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 7: ALTERNATIVE PROCESSES FOR MEDICAL DEVICES AND COMBINATION PRODUCTS |
BS EN ISO 25539-1:2017 | Cardiovascular implants. Endovascular devices Endovascular prostheses |
BS ISO/IEEE 11073-00103 : 2015 | HEALTH INFORMATICS - PERSONAL HEALTH DEVICE COMMUNICATION - PART 00103: OVERVIEW |
ANSI/AAMI/ISO 14937:2009(R2013) | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
01/561789 DC : DRAFT APR 2001 | BS ISO 13960 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - PLASMAFILTERS |
PREN ISO 11135 : DRAFT 2011 | STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO/DIS 11135:2011) |
15/30328959 DC : 0 | BS ISO 16142-2 - MEDICAL DEVICES - RECOGNIZED ESSENTIAL PRINCIPLES OF SAFETY AND PERFORMANCE OF MEDICAL DEVICES - PART 2: GENERAL ESSENTIAL PRINCIPLES AND ADDITIONAL SPECIFIC ESSENTIAL PRINCIPLES FOR ALL IVD MEDICAL DEVICES AND GUIDANCE ON THE SELECTION OF STANDARDS |
BS EN ISO 7198:2017 | Cardiovascular implants and extracorporeal systems. Vascular prostheses. Tubular vascular grafts and vascular patches |
PREN 45502-1 : DRAFT 2013 | ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND INFORMATION TO BE PROVIDED BY THE MANUFACTURER |
I.S. EN ISO 25539-2:2012 | CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 2: VASCULAR STENTS (ISO 25539-2:2012) |
BS ISO 18362:2016 | Manufacture of cell-based health care products. Control of microbial risks during processing |
ANSI/AAMI/ISO 22442-2:2016 | MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - PART 2: CONTROLS ON SOURCING, COLLECTION AND HANDLING |
15/30246774 DC : 0 | BS EN 82304-1 - HEALTH SOFTWARE - PART 1: GENERAL REQUIREMENTS FOR PRODUCT SAFETY |
BS EN 16372:2014 | Aesthetic surgery services |
I.S. EN ISO 14155:2011 | CLINICAL INVESTIGATION OF MEDICAL DEVICES FOR HUMAN SUBJECTS - GOOD CLINICAL PRACTICE (ISO 14155:2011) |
EN ISO 13408-2:2018 | Aseptic processing of health care products - Part 2: Sterilizing filtration (ISO 13408-2:2018) |
16/30331656 DC : 0 | BS ISO 8637-3 - EXTRACORPOREAL SYSTEMS FOR BLOOD PURIFICATION - PART 3: PLASMAFILTERS |
S.R. CEN TR 15640:2007 | HEALTH INFORMATICS - MEASURES FOR ENSURING THE PATIENT SAFETY OF HEALTH SOFTWARE |
I.S. EN ISO 13504:2012 | DENTISTRY - GENERAL REQUIREMENTS FOR INSTRUMENTS AND RELATED ACCESSORIES USED IN DENTAL IMPLANT PLACEMENT AND TREATMENT (ISO 13504:2012) |
10/30203224 DC : 0 | BS ISO 13022 - MEDICAL PRODUCTS CONTAINING VIABLE HUMAN CELLS - APPLICATION OF RISK MANAGEMENT AND REQUIREMENTS FOR PROCESSING PRACTICES |
AAMI ISO TIR 11139 : 2006 | STERILIZATION OF HEALTH CARE PRODUCTS - VOCABULARY |
PD IEC/PAS 63077:2016 | Good refurbishment practices for medical imaging equipment |
I.S. EN ISO 11137-1:2015 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11137-1:2006, INCLUDING AMD 1:2013) |
17/30358658 DC : 0 | BS EN 13795-1 - SURGICAL CLOTHING AND DRAPES - REQUIREMENTS AND TEST METHODS - PART 1: SURGICAL DRAPES AND GOWNS |
BS ISO 27427:2013 | Anaesthetic and respiratory equipment. Nebulizing systems and components |
PD CEN/TR 15640:2007 | Health informatics. Measures for ensuring the patient safety of health software |
I.S. EN ISO 13408-1:2015 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 1: GENERAL REQUIREMENTS (ISO 13408-1:2008, INCLUDING AMD 1:2013) |
UNE-EN ISO 5840-3:2013 | Cardiovascular implants - Cardiac valve prostheses - Part 3: Heart valve substitutes implanted by transcatheter techniques (ISO 5840-3:2013) |
DIN EN ISO 18113-1:2013-01 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009) |
BS ISO 16840-6:2015 | Wheelchair seating Simulated use and determination of the changes in properties of seat cushions |
14/30281557 DC : 0 | BS EN ISO 7198 - CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - VASCULAR PROSTHESES - TUBULAR VASCULAR GRAFTS AND VASCULAR PATCHES |
14/30273161 DC : 0 | BS EN 556-2 - STERILIZATION OF MEDICAL DEVICES - REQUIREMENTS FOR MEDICAL DEVICES TO BE DESIGNATED ''STERILE'' - PART 2: REQUIREMENTS FOR ASEPTICALLY PROCESSED MEDICAL DEVICES |
BS EN ISO 18113-1:2011 | In vitro diagnostic medical devices. Information supplied by the manufacturer (labelling) Terms, definitions and general requirements |
BS EN ISO 25539-3:2011 | Cardiovascular implants. Endovascular devices Vena cava filters |
AAMI ISO 10993-1:2009 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 1: EVALUATION AND TESTING WITHIN A RISK MANAGEMENT PROCESS |
BS ISO 29942:2011 | Prophylactic dams. Requirements and test methods |
12/30251858 DC : 0 | BS ISO 4074 - NATURAL RUBBER LATEX MALE CONDOMS - REQUIREMENTS AND TEST METHODS |
16/30312836 DC : 0 | BS ISO 19227 - CLEANING OF ORTHOPEDIC IMPLANTS - GENERAL REQUIREMENTS |
DD CEN/TS 15224:2005 | Health services. Quality management systems. Guide for the use of EN ISO 9001:2000 |
BS ISO 13175-3:2012 | Implants for surgery. Calcium phosphates Hydroxyapatite and beta-tricalcium phosphate bone substitutes |
10/30213842 DC : 0 | BS EN ISO 11608-5 - NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 5: AUTOMATED FUNCTIONS |
04/30101211 DC : DRAFT APR 2004 | ISO 11607-1 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS |
BS ISO 29943-2:2017 | Condoms. Guidance on clinical studies Female condoms, clinical function studies based on self-reports |
DD CEN ISO/TS 17665-2:2009 | Sterilization of health care products. Moist heat Guidance on the application of ISO 17665-1 |
UNE-EN ISO 11607-2:2017 | Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes (ISO 11607-2:2006, including Amd 1:2014) |
AAMI ISO 7199 : 2009 | CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - BLOOD-GAS EXCHANGERS (OXYGENATORS) |
DIN EN 15224:2016-04 (Draft) | QUALITY MANAGEMENT SYSTEMS - EN ISO 9001:2015 FOR HEALTHCARE |
ANSI/AAMI/ISO 11607-1:2006/(R)2015 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS, AND PACKAGING SYSTEMS |
PD CEN ISO/TR 14969:2005 | Medical devices. Quality management systems. Guidance on the application of ISO 13485:2003 |
08/30179589 DC : DRAFT MAR 2008 | BS ISO 15674 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - HARD-SHELL CARDIOTOMY/VENOUS RESERVOIR SYSTEMS (WITH/WITHOUT FILTER) AND SOFT VENOUS RESERVOIR BAGS |
16/30310949 DC : 0 | BS ISO 5910 - CARDIOVASCULAR IMPLANTS AND EXTRACOPOREAL SYSTEMS - CARDIAC VALVE REPAIR DEVICES |
CSA ISO/TS 11139 : 2018 | STERILIZATION OF HEALTH CARE PRODUCTS - VOCABULARY |
04/30048301 DC : DRAFT MAY 2004 | BS EN ISO 11137-1 - STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
BS ISO 18385:2016 | Minimizing the risk of human DNA contamination in products used to collect, store and analyze biological material for forensic purposes. Requirements |
CSA Z17665-2 : 2009 : R2014 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF ISO 17665-1 |
S.R. CEN ISO TS 17665-2:2009 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF ISO 17665-1 |
14/30255138 DC : 0 | BS EN ISO 11607-2:2006/A1 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES |
PD CR 12401:2003 | Dentistry. Guidance on the classification of dental devices and accessories |
11/30227618 DC : 0 | BS ISO 11658 - CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - BLOOD/TISSUE CONTACT SURFACE MODIFICATIONS FOR EXTRACORPOREAL PERFUSION SYSTEMS |
DIN EN ISO 13408-3:2011-09 | Aseptic processing of health care products - Part 3: Lyophilization (ISO 13408-3:2006) |
04/30079743 DC : DRAFT APR 2004 | ISO 15378 - PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2000 WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP) |
CSA Z11137-3 : 2007 : R2016 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS |
CSA Z11137-2 : 2007 : R2012 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE |
AAMI ISO 20857 : 2010 | STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
CSA ISO TR 14969 : 2005 : R2010 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003 |
I.S. CEN TS 15224:2006 | HEALTH SERVICES - QUALITY MANAGEMENT SYSTEMS - GUIDE FOR THE USE OF EN ISO 9001:2000 |
UNE-EN 15224:2017 | Quality management systems - EN ISO 9001:2015 for healthcare |
04/30101215 DC : DRAFT APR 2004 | ISO 11607-2 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES |
EN ISO 11135:2014 | Sterilization of health-care products - Ethylene oxide - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 11135:2014) |
AAMI ISO TIR 17665-3:2014 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - GUIDANCE ON THE DESIGNATION OF A MEDICAL PRODUCT TO A PRODUCT FAMILY AND PROCESSING CATEGORY FOR STEAM STERILIZATION |
S.R. CR 14060:2000 | MEDICAL DEVICE TRACEABILITY |
AAMI ISO 13408-1 : 2008 : INC : AMD 1 : 2013 : R201100 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 1: GENERAL REQUIREMENTS |
ISO 11249:2018 | Copper-bearing intrauterine contraceptive devices — Guidance on the design, execution, analysis and interpretation of clinical studies |
UNE-EN ISO 15378:2016 | Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2008, with reference to Good Manufacturing Practice (GMP) (ISO 15378:2015) |
CSA ISO 14971 : 2007 : R2017 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
GOST R ISO 13485 : 2004 | MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - SYSTEM REQUIREMENTS FOR REGULATORY PURPOSES |
CSA ISO 14971 : 2007 : R2012 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
CSA Z11138-1 : 2007 : R2012 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 1: GENERAL REQUIREMENTS |
UNI EN ISO 15194 : 2009 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
AAMI TIR45 : 2012 | GUIDANCE ON THE USE OF AGILE PRACTICES IN THE DEVELOPMENT OF MEDICAL DEVICE SOFTWARE |
BS ISO 13779-6:2015 | Implants for surgery. Hydroxyapatite Powders |
ANSI/AAMI/ISO 11137-3:2017 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL |
ISO 17327-1:2018 | Non-active surgical implants — Implant coating — Part 1: General requirements |
PREN 13795-2 : DRAFT 2017 | SURGICAL CLOTHING AND DRAPES - REQUIREMENTS AND TEST METHODS - PART 2: CLEAN AIR SUITS |
BS EN ISO 11607-1 : 2009 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS |
DIN EN ISO 25539-1:2015-07 (Draft) | CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 1: ENDOVASCULAR PROSTHESES (ISO 25539-1:2017) |
I.S. EN ISO 7198:2017 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - VASCULAR PROSTHESES - TUBULAR VASCULAR GRAFTS AND VASCULAR PATCHES (ISO 7198:2016) |
AAMI ISO 11137-1 : 2006 : R2010 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
DIN EN ISO 11737-1:2009-09 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 1: DETERMINATION OF A POPULATION OF MICROORGANISMS ON PRODUCTS |
IEEE 11073-00103-2012 | Health informatics - Personal health device communication Part 00103: Overview |
S.R. CEN ISO TS 11135-2:2008 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 2: GUIDANCE ON THE APPLICATION OF ISO 11135-1 |
AAMI ISO 14160 : 2011 | STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
BS IEC 82304-1 : 2016 | HEALTH SOFTWARE - PART 1: GENERAL REQUIREMENTS FOR PRODUCT SAFETY |
BS EN ISO 12870:2014 | Ophthalmic optics. Spectacle frames. Requirements and test methods |
I.S. EN 45502-2-3:2010 | ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-3: PARTICULAR REQUIREMENTS FOR COCHLEAR AND AUDITORY BRAINSTEM IMPLANT SYSTEMS |
ISO/TR 14283:2018 | Implants for surgery Essential principles of safety and performance |
BS EN 62304 : 2006 | MEDICAL DEVICE SOFTWARE - SOFTWARE LIFE-CYCLE PROCESSES |
ISO/TS 15539:2000 | Cardiovascular implants Endovascular prostheses |
UNI EN ISO 11737-1 : 2006 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 1: DETERMINATION OF A POPULATION OF MICROORGANISMS ON PRODUCTS |
ISO/TS 17665-3:2013 | Sterilization of health care products — Moist heat — Part 3: Guidance on the designation of a medical device to a product family and processing category for steam sterilization |
UNI EN ISO 11607-2 : 2014 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES |
I.S. EN ISO 7199:2017 | CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - BLOOD-GAS EXCHANGERS (OXYGENATORS) (ISO 7199:2016) |
I.S. EN ISO 12417-1:2015 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - VASCULAR DEVICE-DRUG COMBINATION PRODUCTS - PART 1: GENERAL REQUIREMENTS (ISO 12417-1:2015) |
UNI EN ISO 18113-1 : 2012 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS |
AAMI ISO TIR 11135-2 : 2008 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 2: GUIDANCE ON THE APPLICATION OF ANSI/AAMI/ISO 11135-1 |
ASTM F 3184 : 2016 | Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion |
PREN ISO 15197 : DRAFT 2011 | IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE MONITORING SYSTEMS FOR SELF-TESTING IN MANAGING DIABETES MELLITUS |
UNI EN 16224 : 2014 | HEALTHCARE PROVISION BY CHIROPRACTORS |
ASTM F 3268 : 2018 | Standard Guide for <emph type="bdit">in vitro</emph> Degradation Testing of Absorbable Metals |
CSA ISO 11140-1 : 2016 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 1: GENERAL REQUIREMENTS |
UNE-EN ISO 25424:2011 | Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 25424:2009) |
EN ISO 17664:2017 | Processing of health care products - Information to be provided by the medical device manufacturer for the processing of medical devices (ISO 17664:2017) |
ISO 15194:2009 | In vitro diagnostic medical devices Measurement of quantities in samples of biological origin Requirements for certified reference materials and the content of supporting documentation |
ISO 16054:2000 | Implants for surgery Minimum data sets for surgical implants |
NF EN ISO 14160 : 2011 | STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
ISO/TS 13131:2014 | Health informatics Telehealth services Quality planning guidelines |
ISO 11135:2014 | Sterilization of health-care products — Ethylene oxide — Requirements for the development, validation and routine control of a sterilization process for medical devices |
ISO/IEC Guide 63:2012 | Guide to the development and inclusion of safety aspects in International Standards for medical devices |
I.S. EN ISO 20072:2013 | AEROSOL DRUG DELIVERY DEVICE DESIGN VERIFICATION - REQUIREMENTS AND TEST METHODS (ISO 20072:2009) |
ISO 27427:2013 | Anaesthetic and respiratory equipment — Nebulizing systems and components |
ASTM F 2213 : 2017 : REDLINE | Standard Test Method for Measurement of Magnetically Induced Torque on Medical Devices in the Magnetic Resonance Environment |
I.S. EN 62366:2009 | MEDICAL DEVICES - APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES |
IEC 62304:2006+AMD1:2015 CSV | Medical device software - Software life cycle processes |
IEC 62366:2007+AMD1:2014 CSV | Medical devices - Application of usability engineering to medical devices |
DIN EN ISO 15883-1:2014-10 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006 + AMD 1:2014) |
DIN EN ISO 11138-1:2015-10 (Draft) | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 1: GENERAL REQUIREMENTS (ISO 11138-1:2017) |
DIN EN ISO 11137-1:2015-11 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11137-1:2006, INCLUDING AMD 1:2013) |
DIN EN ISO 10451:2010-11 | Dentistry - Contents of technical file for dental implant systems (ISO 10451:2010) |
DIN EN ISO 11737-2:2010-04 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS |
ISO 7198:2016 | Cardiovascular implants and extracorporeal systems — Vascular prostheses — Tubular vascular grafts and vascular patches |
UNE-EN ISO 11137-2:2015 | Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose (ISO 11137-2:2013) |
BS EN ISO 11137-3:2017 | Sterilization of health care products. Radiation Guidance on dosimetric aspects of development, validation and routine control |
BS EN 13795-1 : 2002 | SURGICAL DRAPES, GOWNS AND CLEAN AIR SUITS, USED AS MEDICAL DEVICES, FOR PATIENTS, CLINICAL STAFF AND EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR MANUFACTURERS, PROCESSORS AND PRODUCTS |
UNE-EN ISO 11737-2:2010 | Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process (ISO 11737-2:2009) |
UNE-EN 285:2016 | Sterilization - Steam sterilizers - Large sterilizers |
BS EN ISO 11980:2012 | Ophthalmic optics. Contact lenses and contact lens care products. Guidance for clinical investigations |
BS EN 1422:2014 | Sterilizers for medical purposes. Ethylene oxide sterilizers. Requirements and test methods |
ISO 25539-1:2017 | Cardiovascular implants — Endovascular devices — Part 1: Endovascular prostheses |
UNE-EN ISO 15197:2015 | In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (ISO 15197:2013) |
BS EN ISO 11135-1:2007 | Sterilization of health care products. Ethylene oxide Requirements for development, validation and routine control of a sterilization process for medical devices |
BS EN ISO 11137-2:2015 | Sterilization of health care products. Radiation Establishing the sterilization dose |
ISO 14161:2009 | Sterilization of health care products Biological indicators Guidance for the selection, use and interpretation of results |
ISO 11608-5:2012 | Needle-based injection systems for medical use Requirements and test methods Part 5: Automated functions |
BS EN ISO 11608-1:2015 | Needle-based injection systems for medical use. Requirements and test methods Needle-based injection systems |
EN ISO 7199:2017 | Cardiovascular implants and artificial organs - Blood-gas exchangers (oxygenators) (ISO 7199:2016) |
ISO 5840-1:2015 | Cardiovascular implants Cardiac valve prostheses Part 1: General requirements |
ISO 14630:2012 | Non-active surgical implants — General requirements |
DIN EN ISO 11608-3:2013-01 | Needle-based injection systems for medical use - Requirements and test methods - Part 3: Finished containers (ISO 11608-3:2012) |
BS EN ISO 4074:2015 | Natural rubber latex male condoms. Requirements and test methods |
ISO/TS 17665-2:2009 | Sterilization of health care products — Moist heat — Part 2: Guidance on the application of ISO 17665-1 |
DIN EN ISO 5840:2009-08 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES |
EN 45502-1 : 2015 | IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND FOR INFORMATION TO BE PROVIDED BY THE MANUFACTURER |
EN ISO 16061:2015 | Instrumentation for use in association with non-active surgical implants - General requirements (ISO 16061:2015) |
EN ISO 81060-1:2012 | Non-invasive sphygmomanometers - Part 1: Requirements and test methods for non-automated measurement type (ISO 81060-1:2007) |
EN ISO 22442-3:2007 | Medical devices utilizing animal tissues and their derivatives - Part 3: Validation of the elimination and/or inactivation of viruses and transmissible spongiform encephalopathy (TSE) agents (ISO 22442-3:2007) |
EN ISO 5840:2009 | Cardiovascular implants - Cardiac valve prostheses (ISO 5840:2005) |
DIN EN 13824:2005-02 | STERILIZATION OF MEDICAL DEVICES - ASEPTIC PROCESSING OF LIQUID MEDICAL DEVICES - REQUIREMENTS |
DIN EN 13795-1:2009-10 | SURGICAL DRAPES, GOWNS AND CLEAN AIR SUITS, USED AS MEDICAL DEVICES, FOR PATIENTS, CLINICAL STAFF AND EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR MANUFACTURERS, PROCESSORS AND PRODUCTS |
DIN EN ISO 14937:2010-03 | Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009) |
DIN EN ISO 25539-1:2017-09 | CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 1: ENDOVASCULAR PROSTHESES (ISO 25539-1:2017) |
CEN ISO/TS 17665-2:2009 | Sterilization of health care products - Moist heat - Part 2: Guidance on the application of ISO 17665-1 (ISO/TS 17665-2:2009) |
ANSI/AAMI/ISO 17664-1:2022 | Processing of health care products—Information to be provided by the medical device manufacturer for the processing of medical devices—Part 1: Critical and semi-critical medical devices |
ASME PVHO 1 : 2016 | SAFETY STANDARD FOR PRESSURE VESSELS FOR HUMAN OCCUPANCY |
ISO 19011:2011 | Guidelines for auditing management systems |
ISO 11607-2:2006 | Packaging for terminally sterilized medical devices Part 2: Validation requirements for forming, sealing and assembly processes |
AS ISO 20387:2020 | Biotechnology - Biobanking - General requirements for biobanking |
AS ISO 22367:2021 | Medical laboratories - Application of risk management to medical laboratories |
ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
ISO 9001:2015 | Quality management systems — Requirements |
ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
ISO 14971:2007 | Medical devices Application of risk management to medical devices |
ISO 11607-1:2006 | Packaging for terminally sterilized medical devices Part 1: Requirements for materials, sterile barrier systems and packaging systems |
EN ISO 9000:2015 | Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.