08/30188146 DC : 0
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
BS EN 10169 - CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS
Hardcopy , PDF
12-31-2010
English
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Designation
5 Information to be supplied by the purchaser
5.1 Mandatory information
5.2 Options
6 Requirements
6.1 General
6.2 General coating properties
6.3 Special coating properties
6.4 Freedom of defects
7 Inspection
7.1 Types of inspection and testing, inspection documents
and specific tests
7.2 Test units
7.3 Type and number of tests
7.4 Sampling
7.5 Test methods
7.6 Retests
8 Marking
9 Packing and dispatch
10 Storage
Annex A (informative) - Types of ambience
Annex B (informative) - Coating materials
Annex C (informative) - Types of atmosphere
Annex D (informative) - Outdoor exposure sites
Annex E (informative) - Storage
Bibliography
BS EN 10169
Committee |
ISE/10
|
DocumentType |
Draft
|
Pages |
38
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
PREN 10169 : DRAFT 2008 | Identical |
ISO 9223:2012 | Corrosion of metals and alloys — Corrosivity of atmospheres — Classification, determination and estimation |
EN ISO 4628-2:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016) |
EN 13523-11:2011 | Coil coated metals - Test methods - Part 11: Resistance to solvents (rubbing test) |
EN 10048:1996 | Hot rolled narrow steel strip - Tolerances on dimensions and shape |
EN 10051:2010 | Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape |
EN 10140:2006 | Cold rolled narrow steel strip - Tolerances on dimensions and shape |
EN 10079:2007 | Definition of steel products |
EN 13523-12:2017 | Coil coated metals - Test methods - Part 12: Resistance to scratching |
EN 10027-2:2015 | DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM |
EN 13523-14:2014 | Coil coated metals - Test methods - Part 14: Chalking (Helmen method) |
EN 13523-10:2017 | Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation |
EN 13523-26:2014 | Coil coated metals - Test methods - Part 26: Resistance to condensation of water |
EN ISO 1043-1:2011/A1:2016 | PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMER AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011/AMD 1:2016) |
EN 13523-6:2002 | Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test) |
EN 10268:2006+A1:2013 | COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
PREN 10346 : DRAFT 2013 | CONTINUOUSLY HOT-DIP COATED STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
EN 13523-24:2017 | Coil coated metals - Test methods - Part 24: Resistance to blocking and pressure marking |
ISO 2808:2007 | Paints and varnishes Determination of film thickness |
EN ISO 11997-1:2017 | Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humid (ISO 11997-1:2017) |
EN 13523-9:2014 | Coil coated metals - Test methods - Part 9: Resistance to water immersion |
EN 13523-0:2014 | Coil coated metals - Test methods - Part 0: General introduction |
EN 10111:2008 | Continuously hot rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions |
EN 13523-3:2014 | Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison |
EN ISO 2409:2013 | Paints and varnishes - Cross-cut test (ISO 2409:2013) |
EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
EN 10139:2016 | Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions |
EN 10025-1:2004 | Hot rolled products of structural steels - Part 1: General technical delivery conditions |
PREN 10338 : DRAFT 2013 | HOT ROLLED AND COLD ROLLED NON-COATED FLAT PRODUCTS OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
EN 10131:2006 (edition 2) | Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape |
EN ISO 4628-4:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2016) |
EN 13523-21:2017 | Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels |
ISO 4628-4:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 4: Assessment of degree of cracking |
EN 13523-23:2015 | Coil coated metals - Test methods - Part 23: Resistance to humid atmospheres containing sulfur dioxide |
EN ISO 8044:2015 | Corrosion of metals and alloys - Basic terms and definitions (ISO 8044:2015) |
ISO 12944-2:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 2: Classification of environments |
PREN 10152 : DRAFT 2015 | ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
EN 10143:2006 (edition 2) | Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape |
EN 13523-22:2017 | Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison |
ISO 4628-5:2016 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking |
EN 10021:2006 | General technical delivery conditions for steel products |
ISO 11997-1:2017 | Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (salt fog)/dry/humid |
ISO 8044:2015 | Corrosion of metals and alloys Basic terms and definitions |
EN 13523-18:2002 | Coil coated metals - Test methods - Part 18: Resistance to staining |
EN 10204:2004 | Metallic products - Types of inspection documents |
ISO 2815:2003 | Paints and varnishes Buchholz indentation test |
EN 10025-2:2004/AC:2005 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
ISO 4997:2015 | Cold-reduced carbon steel sheet of structural quality |
EN 13523-5:2014 | Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test) |
EN 13523-19:2011 | Coil coated metals - Test methods - Part 19: Panel design and method of atmospheric exposure testing |
EN 13523-8:2017 | Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog) |
EN 10130:2006 | Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions |
ISO 4618:2014 | Paints and varnishes — Terms and definitions |
EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
EN ISO 2815:2003 | Paints and varnishes - Buchholz indentation test (ISO 2815:2003) |
ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
EN 13523-7:2014 | Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test) |
EN 13523-1:2017 | Coil coated metals - Test methods - Part 1: Film thickness |
EN 13523-25:2014 | Coil coated metals - Test methods - Part 25: Resistance to humidity |
EN 10020:2000 | Definition and classification of grades of steel |
EN 606:2004 | BAR CODING - TRANSPORT AND HANDLING LABELS FOR STEEL PRODUCTS |
PREN 13523-27 : DRAFT 2015 | COIL COATED METALS - TEST METHODS - PART 27: RESISTANCE TO HUMID POULTICE (CATAPLASM TEST) |
EN ISO 4628-5:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2016) |
EN 13523-4:2014 | Coil coated metals - Test methods - Part 4: Pencil hardness |
ISO 2409:2013 | Paints and varnishes Cross-cut test |
EN 13523-15:2015 | Coil coated metals - Test methods - Part 15: Metamerism |
EN 13523-2:2014 | Coil coated metals - Test methods - Part 2: Gloss |
ISO 1043-1:2011 | Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
EN ISO 2808:2007 | Paints and varnishes - Determination of film thickness (ISO 2808:2007) |
ISO 4628-2:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering |
EN ISO 4618:2014 | Paints and varnishes - Terms and definitions (ISO 4618:2014) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.