DEFSTAN 00-101(PT2)/2(2008) : 2008
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
DESIGN STANDARDS FOR EXPLOSIVES SAFETY IN MOD SHIPS AND SUBMARINES - PART 2: SUBMARINES
Hardcopy , PDF
02-16-2023
English
01-01-2008
0. INTRODUCTION
1. SCOPE
2. WARNING
3. RELATED DOCUMENTS
4. DEFINITIONS AND ABBREVIATIONS
5. AMENDMENT
6. SPONSORSHIP OF THE REQUIREMENT AND SECURITY
7. STATUTORY LEGISLATION AND MOD REGULATION FOR PLATFORM
EXPLOSIVE SAFETY
8. INTRODUCTION TO PLATFORM EXPLOSIVES SAFETY AND CERTIFICATION
Background
Platform Explosives Safety Management Drivers
Platform Explosives Safety Management Process
9. DESIGN FOR PLATFORM EXPLOSIVES SAFETY INCORPORATING THREAT
HAZARD ASSESSMENT & LINES OF DEFENCE
APPENDIX 1 - INTEGRATING ORDNANCE MUNITIONS EXPLOSIVES INTO
MOD SUBMARINES
1.1 Description
1.2 Performance Requirements - Basic Principles for the
Safety and Protection of WSCs, Magazines and Explosives
in MoD Submarines
1.3 ACOP - JSP 862 and other Safety and Environmental
Management Systems (SEMS)
1.4 ACOP for Stowage of Explosives by UN Hazard
Classification Code
1.5 ACOP - Basic Principles of Capacity and Size
1.6 Guidance - Stowage of Explosives by UN Hazard
Classification Code
1.7 Guidance - Basic Principles for Environmental Hazards
APPENDIX 2 - DESIGNATED DANGER AREAS (DDAs)
2.1 Description
2.2 Performance Requirements for DDAs
2.3 ACOP for DDAs
2.4 ACOP for Marking of Areas around Launchers
2.5 Guidance - DDAs
APPENDIX 3 - ADJACENT COMPARTMENTS
3.1 Description
3.2 Performance Requirements for Adjacent Compartments
3.3 ACOP for Reduction of Hazards from Adjacent Compartments
3.4 ACOP for POL and Tanks Adjacent to a WSC/Magazine
3.5 ACOP for Smoke/Heat Detectors in Adjacent Compartments
3.6 Guidance - Adjacent Compartments
3.7 Guidance - POL Products in Adjacent Compartments
3.8 Guidance - Smoke/Heat Detectors in Adjacent Compartments
APPENDIX 4 - GENERAL WSC/MAGAZINE CONSTRUCTION REQUIREMENTS
4.1 Description
4.2 Performance Requirements for General WSC/Magazine
Construction
4.3 ACOP for Structural Integrity of WSCs/Magazines
4.4 ACOP for General WSC Construction Requirements
4.5 ACOP for Hydraulic Systems in WSCs/Magazines
4.6 ACOP for Air Systems in WSCs/Magazines
4.7 ACOP for Electrical Equipment and System Requirements
4.8 ACOP for Non-Electrical Equipment Requirements in
WSCs/Magazines
4.9 ACOP for Painting and Preservation in WSCs/Magazines
4.10 ACOP for Pumping/Flooding Arrangements in WSCs/Magazines
4.11 ACOP for Access to WSCs/Magazines
4.12 ACOP for Emergency Lighting in WSCs/Magazines
4.13 ACOP for Contents of WSCs
4.14 ACOP for Contents of Magazines, Small Magazines and ESLs
4.15 ACOP for WSC/Magazine Hazard Warning/Safety Signs &
Notices
4.16 Guidance - Safety Assessment within the WSC/Magazine
4.17 Guidance - General WSC Construction Requirements
4.18 Guidance - Use of Flammable Hydraulic Fluids
4.19 Guidance - Pumping/Flooding for WSCs/Magazines
4.20 Guidance - Access to WSCs/Magazines
4.21 Guidance - Emergency Lighting for WSCs/Magazines
4.22 Guidance - Magazine Designed Capacity Lists
4.23 Guidance - Safety Signs and Notices
4.24 Guidance - Use of the WSC for Temporary Accommodation
APPENDIX 5 - MUNITION STOWAGES AND FITTINGS
5.1 Description
5.2 Performance Requirements for Munition Stowages and
Fittings
5.3 ACOP for General Munition Stowage Requirements
5.4 ACOP for Clearance between Stowages and Adjacent
Boundaries
5.5 ACOP for Identification of Stowages and Stowage Capacity
5.6 Guidance - Safe Stowage
5.7 Guidance - Clearances between Stowages and Adjacent
Boundaries
APPENDIX 6 - EXPLOSIVES STORE LOCKERS (ESL)/MAGAZINE LOCKERS
6.1 Description
6.2 Performance Requirements for ESL/Magazine Locker Design
6.3 Performance Requirements for ESL/Magazine Locker
Flooding Arrangements
6.4 Performance Requirements for Siting and Installation
of ESLs/Magazine Lockers
6.5 ACOP for ESL/Magazine Locker Design
6.6 ACOP for ESL/Magazine Locker Flooding Arrangements
6.7 ACOP for Siting and Installation of ESLs/Magazine
Lockers
6.8 ACOP for Specific Locker Requirements
6.9 ACOP for General Locker Notices and Notice Boards
6.10 ACOP for ESL/Magazine Locker Contents
6.11 Guidance - ESL/Magazine Lockers
6.12 Guidance - Ready Use Magazines/Lockers
APPENDIX 7 - TORPEDO TUBES, LAUNCH TUBES AND UNDERWATER STORES
EJECTOR SYSTEMS
7.1 Description
7.2 Performance Requirements for Tubes and Launchers
7.3 Performance Requirements for Torpedo and Missile Tubes
7.4 Performance Requirements for Underwater Stores
Launch/Ejector Tubes
7.5 ACOP for Torpedo and Missile Tubes
7.6 ACOP for Underwater Stores Launch/Ejector Tubes
7.7 ACOP for External Launcher/Ejector Tubes
7.8 Guidance - Torpedo Tubes and Underwater Ejector Systems
7.9 Guidance - External Launcher/Ejector Tubes
APPENDIX 8 - EXTRAORDINARY EMBARKATION OF EXPLOSIVES (E3)
8.1 Description
8.2 Performance Requirements for Stowage of E3 Munitions
8.3 Performance Requirements for Assault Routes
8.4 ACOP for Stowage of E3 Munitions
8.5 ACOP for Assault Routes
8.6 ACOP for Munition Layout and Configuration
8.7 Guidance - Stowage of E3 Munitions in Submarines
8.8 Guidance - Munition Layout and Configuration
APPENDIX 9 - AIR CONDITIONING/VENTILATION SYSTEMS
9.1 Description
9.2 Performance Requirements for Air
Conditioning/Ventilation Systems
9.3 ACOP for Environmental Requirements
9.4 ACOP for Ventilation System Design and Installation
9.5 ACOP for Ventilation Trunking
9.6 ACOP for Ventilation Isolation Arrangements
9.7 ACOP for Ventilation Valve - Local and Remote
Operating Positions
9.8 ACOP for Ventilation System Notices
9.9 Guidance - Air Conditioning/Ventilation Systems
APPENDIX 10 - FIRE PREVENTION AND FIRE FIGHTING ARRANGEMENTS
10.1 Description
10.2 Performance Requirements for General Fire Fighting
Arrangements
10.3 ACOP for Fire Prevention in Submarine Explosives Areas
10.4 ACOP for Common Principles of Fire Detection and
Control Systems
10.5 ACOP for General Principles for WSC Water Fog Systems
10.6 ACOP for WSC Firefighting Systems in S, T and V Class
Submarines
10.7 ACOP for WSC Firefighting Systems Water Supply in S,
T and V Class Submarines
10.8 ACOP for WSC/Magazine Water Fog System Signs/Notices
10.9 ACOP for First Aid Fire Fighting Equipment in
WSC/Magazines
10.10 ACOP for Fire Fighting Arrangements in DDAs
10.11 Guidance - Fire Prevention
10.12 Guidance - Fire Fighting Arrangements - General
10.13 Guidance - Design Requirements for Smoke and Heat
Detection
10.14 Guidance - Design Requirements for Spray Coverage
10.15 Guidance - Requirements for Free Air Space
10.16 Guidance - Integration of Fire Alarm Systems
10.17 Guidance - Munition Fire Characteristics (see NAN
EXP/03 Issue 2)
10.18 Guidance on First Aid Fire Fighting Equipment for
WSC/Magazines and DDAs
APPENDIX 11 - MITIGATION METHODS TO PREVENT INITIATION OR
REDUCE CONSEQUENCES FROM MUNITION INCIDENTS
11.1 Description
11.2 Performance Requirements for Explosives Mitigation
Methods
11.3 ACOP for Mitigation Methods
11.4 ACOP for Mitigation of Fire
11.5 ACOP for Mitigation of RATTAM Threats
11.6 ACOP for Mitigation of Blast Overpressure and Under
Water Shock
11.7 ACOP for Mitigation of Sympathetic Reaction
11.8 ACOP for Mitigation of Rocket Efflux and Propulsive
Reaction
11.9 ACOP for Mitigation of Stowage of Shaped Charge
Warheads including Demolition Munitions
11.10 Guidance - Deriving Protection and Mitigation Methods
11.11 Guidance - Assessment of RATTAM Protection
APPENDIX 12 - SECURITY AND ANTI-SABOTAGE ARRANGEMENTS
12.1 Description
12.2 Performance Requirements for Security and Anti
Sabotage
12.3 ACOP for Security of Doors, Hatches, Manholes and
Escape Scuttles
12.4 ACOP for Security Arrangements
12.5 Guidance on Security and Anti-Sabotage Arrangements
APPENDIX 13 - AMMUNITION HANDLING - EMBARKING, STOWING
AND SUPPLY
13.1 Description
13.2 Performance Requirements for Ammunition Handling
Safety Policy
13.3 Performance Requirements for Ammunition Handling -
New Development
13.4 Performance Requirements for Ammunition Routes
13.5 Performance Requirements for Handling/Lifting Equipment
13.6 ACOP for Ammunition Handling
13.7 ACOP for Ammunition Routes
13.8 ACOP for Handling/Lifting Equipment in WSCs/Magazines
and DDAs
13.9 ACOP for Ammunition Route Drawings
13.10 Guidance - Ammunition Handling Safety Assessment
13.11 Guidance - Mechanical Handling Equipment in a
Submarine Environment
ANNEX A - RELATED DOCUMENTS
ANNEX B - ABBREVIATIONS
ANNEX C - DEFINITIONS
ANNEX D - RN FORM S285K
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.