ISO 12499:1999
|
Industrial fans Mechanical safety of fans Guarding
|
IEC 60079-10:2002
|
Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas
|
EN 1886:2007
|
Ventilation for buildings - Air handling units - Mechanical performance
|
EN 1507:2006
|
Ventilation for buildings - Sheet metal air ducts with rectangular section - Requirements for strength and leakage
|
EN 13053:2006+A1:2011
|
Ventilation for buildings - Air handling units - Rating and performance for units, components and sections
|
ISO 3744:2010
|
Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
|
EN 1505:1997
|
Ventilation for buildings - Sheet metal air ducts and fittings with rectangular cross section - Dimensions
|
NS 5575 : 1ED 1987
|
VENTILATION DUCTS - IDENTIFICATION COLOURS
|
NFPA 96 : 2017
|
VENTILATION CONTROL AND FIRE PROTECTION OF COMMERCIAL COOKING OPERATIONS
|
ISO 14694:2003
|
Industrial fans Specifications for balance quality and vibration levels
|
ISO 7547:2002
|
Ships and marine technology Air-conditioning and ventilation of accommodation spaces Design conditions and basis of calculations
|
ISO 16812:2007
|
Petroleum, petrochemical and natural gas industries Shell-and-tube heat exchangers
|
IEC 61892-7:2014
|
Mobile and fixed offshore units - Electrical installations - Part 7: Hazardous areas
|
ISO 8861:1998
|
Shipbuilding — Engine-room ventilation in diesel-engined ships — Design requirements and basis of calculations
|
ISO 1940-1:2003
|
Mechanical vibration Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances
|
AMCA 500 : 1994
|
TEST METHODS FOR LOUVERS, DAMPERS AND SHUTTERS
|
EN 779:2012
|
Particulate air filters for general ventilation - Determination of the filtration performance
|
ASHRAE HDBK FUNDAMENTALS : 2013
|
ASHRAE HANDBOOK - FUNDAMENTALS
|
EN 1506:2007
|
Ventilation for buildings - Sheet metal air ducts and fittings with circular cross-section - Dimensions
|
AMCA 210 : 2016
|
LABORATORY METHODS OF TESTING FANS FOR CERTIFIED AERODYNAMIC PERFORMANCE RATING
|
ISO 5801:2017
|
Fans — Performance testing using standardized airways
|
EN 12237:2003
|
Ventilation for buildings - Ductwork - Strength and leakage of circular sheet metal ducts
|
ISO 21789:2009
|
Gas turbine applications — Safety
|
EN 13771-1:2016
|
Compressors and condensing units for refrigeration - Performance testing and test methods - Part 1: Refrigerant compressors
|
AMCA 201 : 2002(R2011)
|
FANS AND SYSTEMS
|
API 505 : 1997
|
RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS I, ZONE 0, ZONE 1, AND ZONE 2
|
ISO 12241:2008
|
Thermal insulation for building equipment and industrial installations Calculation rules
|
EN 50272-2:2001
|
Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries
|
IEC 60079-0:2011
|
Explosive atmospheres - Part 0: Equipment - General requirements
|
ISO 7730:2005
|
Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
|
EN 12900:2013
|
Refrigerant compressors - Rating conditions, tolerances and presentation of manufacturer's performance data
|
EN 1751:2014
|
Ventilation for buildings - Air terminal devices - Aerodynamic testing of damper and valves
|
ISO 7235:2003
|
Acoustics — Laboratory measurement procedures for ducted silencers and air-terminal units — Insertion loss, flow noise and total pressure loss
|
API 4589 : 1993
|
Fugitive Hydrocarbon Emissions from Oil and Gas Production Operations
|
IEC 60079-13:2017
|
Explosive atmospheres - Part 13: Equipment protection by pressurized room "p" and artificially ventilated room "v"
|