EN 54-4:1997/A2:2006
Current
The latest, up-to-date edition.
FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 4: POWER SUPPLY EQUIPMENT
08-23-2006
Foreword
Introduction
1 Scope
2 Normative references
3 Definitions and abbreviations
3.1 Terms and definitions
3.2 Abbreviations
4 General requirements
4.1 Conformity
4.2 Power sources
5 Functions
5.1 Power supply from the main power source
5.2 Power supply from the standby power source
(battery)
5.3 Charger
5.4 Faults
6 Materials, design and manufacture
6.1 Manufacturer's declaration
6.2 Mechanical design
6.3 Electrical design
6.4 Power supply interface
7 Documentation
7.1 User's documentation
7.2 Design documentation
8 Marking
9 Tests
9.1 General
9.2 Functional tests
9.3 Test of the charger and the standby power
source
9.4 Environmental tests
9.5 Cold (operational)
9.6 Damp heat, steady state (operational)
9.7 Impact (operational)
9.8 Vibration, sinusoidal (operational)
9.9 Electromagnetic Compatibility (EMC), Immunity tests
(operational)
9.10 (deleted)
9.11 (deleted)
9.12 (deleted)
9.13 (deleted)
9.14 Damp heat, steady state (endurance)
9.15 Vibration, sinusoidal (endurance)
Annex A (normative) Laboratory procedure for testing compliance
with the requirements of 5.2.1 and 5.4.c
Annex ZA (informative) Clauses of this European Standard
addressing the provisions of the EU Construction
Products Directives (89/106/EEC)
Bibliography
Specifies EMC and updates software and other requirements.
Committee |
CEN/TC 72
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Supersedes |
Standards | Relationship |
I.S. EN 54-4:1998 | Identical |
NEN EN 54-4 : 1999 AMD 2 2006 | Identical |
NF EN 54-4 : 97 AMD 2 2006 | Identical |
PN EN 54-4 : 2001 AMD 2 2007 | Identical |
DIN EN 54-4:1997-12 | Identical |
SN EN 54-4 : 1998 AMD 2 2006 | Identical |
BS EN 54-4:1998 | Identical |
NS EN 54-4 : 1997 AMD 2 2006 | Identical |
NBN EN 54-4 : 1998 AMD 2 2006 | Identical |
UNI EN 54-4 : 2007 | Identical |
BS EN 54-16:2008 | Fire detection and fire alarm systems Voice alarm control and indicating equipment |
DIN EN 54-25 E : 2009 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 25: COMPONENTS USING RADIO LINKS |
PREN 54-20 : DRAFT 2014 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 20: ASPIRATING SMOKE DETECTORS |
PD CEN/TS 54-32:2015 | Fire detection and fire alarm systems Planning, design, installation, commissioning, use and maintenance of voice alarm systems |
05/30103133 DC : 0 | BS EN 15276 - FIXED FIREFIGHTING SYSTEMS - CONDENSED AEROSOL EXTINGUISHING SYSTEMS - PART 2: DESIGN, INSTALLATION AND MAINTENANCE |
DD CEN/TS 54-14:2004 | Fire detection and fire alarm systems Guidelines for planning, design, installation, commissioning, use and maintenance |
PREN 54-12 : DRAFT 2009 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 12: SMOKE DETECTORS - LINE DETECTORS USING AN OPTICAL BEAM |
S.R. HD 60364-5-56:2010 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-56: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - SAFETY SERVICES |
14/30274689 DC : 0 | BS EN 54-20 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 20: ASPIRATING SMOKE DETECTORS |
BS EN 54-13:2017 | Fire detection and fire alarm systems Compatibility and connectability assessment of system components |
PREN 54-13 : DRAFT 2014 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 13: COMPATIBILITY AND CONNECTABILITY ASSESSMENT OF SYSTEM COMPONENTS |
I.S. EN CLC TS 50398:2003 | ALARM SYSTEMS - COMBINED AND INTEGRATED ALARM SYSTEMS - GENERAL REQUIREMENTS |
DD CEN/TS 14816:2008 | Fixed firefighting systems. Water spray systems. Design and installation |
05/30117311 DC : 0 | EN 54-25 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 25: COMPONENTS USING RADIO LINKS AND SYSTEM REQUIREMENTS |
11/30240275 DC : 0 | BS EN 54-22 - FIRE DETECTION AND FIRE ALARM SYSTEM - PART 22: RESETTABLE LINE TYPE HEAT DETECTORS |
11/30249544 DC : 0 | BS EN 54-14 - FIRE DETECTION AND FIRE ALARM SYSTEMS - GUIDELINES FOR PLANNING, DESIGN, INSTALLATION, COMMISSIONING, USE AND MAINTENANCE |
03/102595 DC : 0 | BS EN 14637 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED HOLD-OPEN SYSTEMS FOR FIRE/SMOKE DOOR ASSEMBLIES - REQUIREMENTS, TEST METHODS, APPLICATION AND MAINTENANCE |
04/30119106 DC : DRAFT AUG 2004 | EN 14972 - FIXED FIREFIGHTING SYSTEMS - WATERMIST SYSTEMS - DESIGN AND INSTALLATION |
S.R. CEN/TS 54-32:2015 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 32: PLANNING, DESIGN, INSTALLATION, COMMISSIONING, USE AND MAINTENANCE OF VOICE ALARM SYSTEMS |
PREN 54-2 : DRAFT 2016 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 2: CONTROL AND INDICATING EQUIPMENT |
CEN/TS 54-14:2004 | Fire detection and fire alarm systems - Part 14: Guidelines for planning, design, installation, commissioning, use and maintenance |
IEC TR 61831:2011 | On-line analyser systems - Guide to design and installation |
DIN EN 54-20 E : 2009 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 20: ASPIRATING SMOKE DETECTORS |
UNE-HD 60364-5-56:2010 | Low-voltage electrical installations - Part 5-56: Selection and erection of electrical equipment - Safety services |
VDI 6010 Blatt 2:2011-05 | Technical safety installations - Automation and control of fire protective services |
VDI 4062:2016-04 | Emergency evacuation of people |
07/30164493 DC : 0 | BS EN 14637 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED HOLD-OPEN SYSTEMS FOR FIRE/SMOKE DOOR ASSEMBLIES - REQUIREMENTS, TEST METHODS, APPLICATIONS AND MAINTENANCE |
DIN EN 54-27 E : 2015 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 27: DUCT SMOKE DETECTORS |
PD IEC/TR 61831:2011 | On-line analyser systems. Guide to design and installation |
04/30104415 DC : DRAFT AUG 2004 | EN 54-20 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 20: ASPIRATING SMOKE DETECTORS |
00/104442 DC : DRAFT JUNE 2000 | PREN 13916 - FIRE RESISTING DOORSETS - REQUIREMENTS AND CLASSIFICATION |
BS EN 54-25:2008 | Fire detection and fire alarm systems Components using radio links |
I.S. HD 60364-5-56:2010 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-56: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - SAFETY SERVICES (IEC 60364-5-56:2009 (EQV)) |
CEN/TS 54-32:2015 | Fire detection and fire alarm systems - Part 32: Planning, design, installation, commissioning, use and maintenance of voice alarm systems |
EN 54-13:2017 | Fire detection and fire alarm systems - Part 13: Compatibility and connectability assessment of system components |
UNI EN 54-16 : 2008 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 16: VOICE ALARM CONTROL AND INDICATING EQUIPMENT |
I.S. EN 54-13:2017 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 13: COMPATIBILITY AND CONNECTABILITY ASSESSMENT OF SYSTEM COMPONENTS |
DIN EN 14637 E : 2008 | BUILDING HARDWARE - ELECTRICALLY CONTROLLED HOLD-OPEN SYSTEMS FOR FIRE/SMOKE DOOR ASSEMBLIES - REQUIREMENTS, TEST METHODS, APPLICATION AND MAINTENANCE |
BS EN 54-21:2006 | Fire detection and fire alarm systems Alarm transmission and fault warning routing equipment |
BS EN 14637:2007 | Building hardware. Electrically controlled hold-open systems for fire/smoke door assemblies. Requirements, test methods, application and maintenance |
UNI EN 54-20 : 2006 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 20: ASPIRATING SMOKE DETECTORS |
UNE-EN 54-16:2010 | Fire detection and fire alarm systems - Part 16: Voice alarm control and indicating equipment |
11/30240441 DC : 0 | BS EN 54-28 - FIRE DETECTION AND FIRE ALARM SYSTEM - PART 28: NON-RESET TABLE LINE TYPE HEAT DETECTORS |
09/30170243 DC : 0 | BS EN 54-12 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 12: SMOKE DETECTORS - LINE DETECTORS USING AN OPTICAL BEAM |
07/30158994 DC : 0 | BS EN 54-22 - FIRE DETECTION AND FIRE ALARM SYSTEM - PART 22: LINE TYPE HEAT DETECTORS |
12/30254899 DC : 0 | BS EN 54-2 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 2: CONTROL AND INDICATING EQUIPMENT |
14/30290848 DC : 0 | BS EN 54-13 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 13: COMPATIBILITY AND CONNECTABILITY ASSESSMENT OF SYSTEM COMPONENTS |
BS EN 54-27:2015 | Fire detection and fire alarms systems Duct smoke detectors |
HD 60364-5-56:2010/A12:2017 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-56: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - SAFETY SERVICES |
UNI EN 54-25 : 2008 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 25: COMPONENTS USING RADIO LINKS |
I.S. CEN TS 54-14:2004 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 14: GUIDELINES FOR PLANNING, DESIGN, INSTALLATION, COMMISSIONING, USE AND MAINTENANCE |
PREN 54-22 : DRAFT 2011 | FIRE DETECTION AND FIRE ALARM SYSTEM - PART 22: RESETTABLE LINE TYPE HEAT DETECTORS |
16/30312379 DC : 0 | BS EN 54-2 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 2: CONTROL AND INDICATING EQUIPMENT |
I.S. EN 54-16:2008 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 16: VOICE ALARM CONTROL AND INDICATING EQUIPMENT |
DIN EN 54-13:2014-09 (Draft) | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 13: COMPATIBILITY AND CONNECTABILITY ASSESSMENT OF SYSTEM COMPONENTS |
I.S. EN 54-25:2008 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 25: COMPONENTS USING RADIO LINKS |
BS EN 54-2 : 1998 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 2: CONTROL AND INDICATING EQUIPMENT |
BS EN 12094-1:2003 | Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for electrical automatic control and delay devices |
BS EN 54-20:2006 | Fire detection and fire alarm systems Aspirating smoke detectors |
DIN EN 54-20:2009-02 | Fire detection and fire alarm systems - Part 20: Aspirating smoke detectors (includes Amendment AC:2008) |
EN 54-21:2006 | Fire detection and fire alarm systems - Part 21: Alarm transmission and fault warning routing equipment |
EN 14637:2007 | Building hardware - Electrically controlled hold-open systems for fire/smoke door assemblies - Requirements, test methods, application and maintenance |
EN 54-16:2008 | Fire detection and fire alarm systems - Part 16: Voice alarm control and indicating equipment |
EN 54-2:1997/A1:2006 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 2: CONTROL AND INDICATING EQUIPMENT |
EN 54-27:2015 | Fire detection and fire alarms systems - Part 27: Duct smoke detectors |
EN 54-20:2006/AC:2008 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 20: ASPIRATING SMOKE DETECTORS |
UNI CEN/TS 14816 : 2009 | FIXED FIREFIGHTING SYSTEMS - WATER SPRAY SYSTEMS - DESIGN, INSTALLATION AND MAINTENANCE |
04/30105620 DC : DRAFT OCT 2004 | EN 54-21 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 21: ALARM TRANSMISSION AND FAULT WARNING ROUTING EQUIPMENT |
DIN EN 54-16 E : 2008 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 16: VOICE ALARM CONTROL AND INDICATING EQUIPMENT |
DIN EN 54-27:2015-05 | Fire detection and fire alarm systems - Part 27: Duct smoke detectors |
03/117188 DC : DRAFT OCT 2003 | BS EN 12101-10 - SMOKE AND HEAT CONTROL SYSTEMS - PART 10: POWER SUPPLIES |
03/317852 DC : 0 | BS EN 14816 - FIXED FIREFIGHTING SYSTEMS - WATER SPRAY SYSTEMS - DESIGN AND INSTALLATION |
I.S. EN 54-27:2015 | FIRE DETECTION AND FIRE ALARMS SYSTEMS - PART 27: DUCT SMOKE DETECTORS |
DIN EN 54-25:2015-10 (Draft) | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 25: COMPONENTS USING RADIO LINKS |
S.R. CEN/TS 14816:2008 | FIXED FIREFIGHTING SYSTEMS - WATER SPRAY SYSTEMS - DESIGN, INSTALLATION AND MAINTENANCE |
DIN EN 54-13 E : 2017 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 13: COMPATIBILITY AND CONNECTABILITY ASSESSMENT OF SYSTEM COMPONENTS |
DIN EN 54-21 E : 2006 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 21: ALARM TRANSMISSION AND FAULT WARNING ROUTING EQUIPMENT |
CEN/TS 14816:2008 | Fixed firefighting systems - Water spray systems - Design, installation and maintenance |
DIN EN 54-21:2006-08 | Fire detection and fire alarm systems - Part 21: Alarm transmission and fault warning routing equipment |
EN 12094-1:2003 | Fixed firefighting systems - Components for gas extinguishing systems - Part 1: Requirements and test methods for electrical automatic control and delay devices |
DIN EN 14637:2008-01 | Building hardware - Electrically controlled hold-open systems for fire/smoke door assemblies - Requirements, test methods, application and maintenance |
DIN EN 54-16:2008-06 | Fire detection and fire alarm systems - Part 16: Voice alarm control and indicating equipment |
EN 54-25:2008/AC:2012 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 25: COMPONENTS USING RADIO LINKS |
93/68/EEC : 1993 AMD 2 1998 | COUNCIL DIRECTIVE 93/68/EEC OF 22.7.93 AMENDING DIRECTIVES 87/404/EEC, 88/378/EEC, 89/106/EEC, 89/336/EEC, 89/392/EEC, 89/686/EEC, 90/384/EEC, 90/385/EEC, 90/396/EEC, 91/263/EEC, 92/42/EEC AND 73/23/EEC |
ENV 50142 : 1994 | ELECTROMAGNETIC COMPATIBILITY - BASIC IMMUNITY STANDARD - SURGE IMMUNITY TESTS |
EN 60068-2-75:2014 | Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
IEC 60950:1999 | Safety of information technology equipment |
EN 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
EN 60068-1:2014 | Environmental testing - Part 1: General and guidance |
IEC 60801-4:1988 | Electromagnetic compatibility for industrial-process measurement and control equipment - Part 4: Electrical fast transient/burst requirements |
EN 54-7:2000/A2:2006 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 7: SMOKE DETECTORS - POINT DETECTORS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONIZATION |
EN 54-2:1997/A1:2006 | FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 2: CONTROL AND INDICATING EQUIPMENT |
IEC 60817:1984 | Spring-operated impact-test apparatus and its calibration |
IEC 60068-2-47:2005 | Environmental testing - Part 2-47: Test - Mounting of specimens for vibration, impact and similar dynamic tests |
IEC 60068-2-3:1969 | Basic environmental testing procedures - Part 2-3: Tests - Test Ca: Damp heat, steady state |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
ISO 9001:2015 | Quality management systems — Requirements |
EN 60068-2-78:2013 | Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state |
IEC 60801-3:1984 | Electromagnetic compatibility for industrial-process measurement and control equipment - Part 3: Radiated electromagnetic field requirements |
IEC 60721-3-3:1994+AMD1:1995+AMD2:1996 CSV | Classification of environmental conditions - Part 3-3: Classification of groups of environmental parameters and their severities - Stationary use at weatherprotected locations |
EN 60068-2-6:2008 | Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) |
IEC 60068-2-75:2014 | Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
EN 50130-4:2011/A1:2014 | ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD: IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER, HOLD UP, CCTV, ACCESS CONTROL AND SOCIAL ALARM SYSTEMS |
EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
EN 54-1:2011 | Fire detection and fire alarm systems - Part 1: Introduction |
IEC 60801-2:1991 | Electromagnetic compatibility for industrial-process measurement and control equipment - Part 2: Electrostatic discharge requirements |
EN 60068-2-47:2005 | Environmental testing - Part 2-47: Tests - Mounting of specimens for vibration, impact and similar dynamic tests |
EN 60721-3-3 : 95 AMD 2 97 | CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES - STATIONARY USE AT WEATHER-PROTECTED LOCATIONS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.