ASTM E 105 : 2016 : REDLINE
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Standard Practice for Probability Sampling of Materials
07-01-2021
English
04-01-2016
CONTAINED IN VOL. 14.02, 2016 Defines a statement of principles for the guidance of ASTM technical committees and others in the preparation of a sampling plan for a specific material.
1.1This practice is primarily a statement of principles for the guidance of ASTM technical committees and others in the preparation of a sampling plan for a specific material.
Committee |
E 11
|
DocumentType |
Redline
|
Pages |
6
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy |
NACE SP 02 90 : 2007 | IMPRESSED CURRENT CATHODIC PROTECTION OF REINFORCING STEEL IN ATMOSPHERICALLY EXPOSED CONCRETE STRUCTURES |
ASTM C 1076 : 2009 : R2015 | Standard Specification for Nuclear Grade Hafnium Oxide Pellets |
AASHTO M 242M/M 242 : 2015 | SPECIFICATION FOR REINFORCED CONCRETE D-LOAD CULVERT, STORM DRAIN, AND SEWER PIPE |
ASTM F 766 : 1982 : R2005 | Standard Test Method for Melting Point of Waxes |
ASTM E 456 : 2013 | Standard Terminology Relating to Quality and Statistics |
AASHTO R 42 : 2006(R 2016) | PRACTICE FOR DEVELOPING A QUALITY ASSURANCE PLAN FOR HOT MIX ASPHALT (HMA) |
NACE SP 02 16 : 2016 | SACRIFICIAL CATHODIC PROTECTION OF REINFORCING STEEL IN ATMOSPHERICALLY EXPOSED CONCRETE STRUCTURES |
ASTM E 456 : 2013 : REV A | Standard Terminology Relating to Quality and Statistics |
ASTM C 92 : 1995 : R2005 | Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials |
ASTM D 3198 : 1997 : R2007 | Standard Test Method for Application and Removal Torque of Threaded or Lug-Style Closures (Withdrawn 2016) |
ASTM F 1819 : 2007 : R2013 | Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood Using a Mechanical Pressure Technique |
NACE SP 01 07 : 2017 | ELECTROCHEMICAL REALKALIZATION AND CHLORIDE EXTRACTION FOR REINFORCED CONCRETE |
ASTM E 1367 : 2003 : R2014 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates |
ASTM D 3633 : 1998 | Standard Test Method for Electrical Resistivity of Membrane-Pavement Systems |
MIL-T-48260 Base Document:1973 | TAPE, POLYESTER (FOR USE IN AMMUNITION) |
AASHTO T 325 : 2004(R2016) | METHOD OF TEST FOR ESTIMATING THE STRENGTH OF CONCRETE IN TRANSPORTATION CONSTRUCTION BY MATURITY TESTS |
ASTM C 752 : 2013 : R2016 | Standard Specification for Nuclear-Grade Silver-Indium-Cadmium Alloy |
ASTM C 92 : 1995 : R2015 | Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials |
ASTM C 1065 : 2008 : R2015 | Standard Specification for Nuclear-Grade Zirconium Oxide Powder |
ASTM E 703 : 2014 : REDLINE | Standard Practice for Electromagnetic (Eddy Current) Sorting of Nonferrous Metals |
ASTM C 992 : 2016 : REDLINE | Standard Specification for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Fuel Storage Racks in a Pool Environment |
ASTM D 5154/D5154M : 2018 | Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test |
ASTM C 888 : 2003 : R2014 | Standard Specification for Nuclear-Grade Gadolinium Oxide (Gd<inf>2</inf>O<inf>3</inf >) Powder |
ASTM C 751 : 2016 : REDLINE | Standard Specification for Nuclear-Grade Boron Carbide Pellets |
ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
ASTM C 92 : 1995 : R1999 | Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials |
ASTM F 778 : 1988 : R2001 | Standard Methods for Gas Flow Resistance Testing of Filtration Media |
ASTM D 4271 : 1988 : R2001 | Standard Practice for Writing Statements on Sampling in Test Methods for Textiles (Withdrawn 2009) |
ASTM C 429 : 2016 : REDLINE | Standard Test Method for Sieve Analysis of Raw Materials for Glass Manufacture |
ASTM B 579 : 1973 : R2015 | Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate) |
ASTM D 2229 : 2010 | Standard Test Method for Adhesion Between Steel Tire Cords and Rubber |
ASTM F 1543 : 1996 | Standard Specification for Shock Attenuation Properties of Fencing Surfaces |
ASTM C 92 : 1995 : R2010 | Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials |
ASTM D 3198 : 1997 : R2002 | Standard Test Method for Application and Removal Torque of Threaded or Lug-Style Closures |
ASTM F 2232 : 2014 : REDLINE | Standard Test Method for Determining the Longitudinal Load Required to Detach High Heels from Footwear |
ASTM C 785 : 2008 | Standard Specification for Nuclear-Grade Aluminum Oxide Pellets |
ASTM D 7257 : 2006 : R2011 | Standard Test Method for Automated Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions (Withdrawn 2018) |
ASTM B 579 : 1973 : R2004 | Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate) |
ASTM E 688 : 1994 : R1999 | Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing |
ASTM F 766 : 1982 : R2000 : EDT 1 | Standard Test Method for Melting Point of Waxes |
ASTM F 1671/F1671M : 2013 : REDLINE | Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System |
ASTM E 447 : 1997 | Test Methods for Compressive Strength of Laboratory Constructed Masonry Prisms (Withdrawn 1998) |
ASTM E 456 : 2013 : REV A : EDT 3 | Standard Terminology Relating to Quality and Statistics |
ASTM D 4463 : 1996 : R2006 | Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts |
ASTM E 1367 : 2003 : EDT 1 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates |
ASTM E 1004 : 2017 : REDLINE | Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method |
ASTM C 1845 : 2016 | Standard Practice for The Separation of Lanthanide Elements from Uranium Matrices Using High Pressure Ion Chromatography (HPIC) for Isotopic Analyses by Inductively Coupled Plasma Mass Spectrometry (ICP-MS) |
ASTM D 1977 : 2016 : REDLINE | Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis |
ASTM C 1066 : 2009 | Standard Specification for Nuclear Grade Zirconium Oxide Pellets |
ASTM D 3665 : 2012 : R2017 | Standard Practice for Random Sampling of Construction Materials |
ASTM C 50/C50M : 2013 : REDLINE | Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products |
ASTM E 456 : 2013 : REV A : R2017 : EDT 2 | Standard Terminology Relating to Quality and Statistics |
ASTM E 1367 : 2003 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates |
ASTM C 1031 : 2011 | Standard Specification for Nuclear-Grade Aluminum Oxide Powder |
ASTM D 3283 : 1998 : R2004 | Standard Specification for Air as an Electrical Insulating Material |
ASTM D 7026 : 2013 | Standard Guide for Sampling and Reporting of Results for Determination of Biobased Content of Materials via Carbon Isotope Analysis (Withdrawn 2020) |
AASHTO R 38 : 2010(R2018) | PRACTICE FOR QUALITY ASSURANCE OF STANDARD MANUFACTURED MATERIALS |
ASTM C 1334 : 2005 | Standard Specification for Uranium Oxides with a <sup>235</sup>U Content of Less Than 5 % for Dissolution Prior to Conversion to Nuclear-Grade Uranium Dioxide |
ASTM D 5644 : 2001 : R2013 | Standard Test Methods for Rubber Compounding Materials—Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber |
ASTM D 1933 : 2003 : R2017 | Standard Specification for Nitrogen Gas as an Electrical Insulating Material |
AASHTO T 346 : 2013 | METHOD OF TEST FOR GLASS BEADS USED IN PAVEMENT MARKINGS |
ASTM D 2229 : 2010 : R2014 | Standard Test Method for Adhesion Between Steel Tire Cords and Rubber (Withdrawn 2023) |
ASTM F 778 : 1988 : R2014 | Standard Methods for Gas Flow Resistance Testing of Filtration Media |
ASTM E 1367 : 2003 : R2008 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates |
ASTM B 579 : 1973 : R1999 | Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate) |
ASTM D 4463 : 1996 : R2001 | Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts |
ASTM C 776 : 2017 : REDLINE | Standard Specification for Sintered Uranium Dioxide Pellets for Light Water Reactors |
ASTM F 1015 : 2003 | Standard Test Method for Relative Abrasiveness of Synthetic Turf Playing Surfaces |
ASTM C 1818 : 2015 | Standard Specification for Synthetic Fiber Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe |
ASTM D 3472 : 1997 | Standard Test Method for Reverse-Ratchet Torque of Type IA Child-Resistant Closures |
ASTM D 4481 : 2010 | Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts |
ASTM D 2743 : 1968 : R1998 | Standard Practices for Uniformity of Traffic Paint Vehicle Solids by Spectroscopy and Gas Chromatography |
ASTM C 985 : 2015 : REDLINE | SPECIFICATION FOR NONREINFORCED CONCRETE SPECIFIED STRENGTH CULVERT, STORM DRAIN, AND SEWER PIPE |
ASTM D 3730 : 2017 : REDLINE | Standard Guide for Testing High-Performance Interior Architectural Wall Coatings |
ASTM D 4463/D4463M : 1996 : R2013 : EDT 1 | Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts |
ASCE 30 00 : 2000 | GUIDELINE FOR CONDITION ASSESSMENT OF THE BUILDING ENVELOPE |
ASTM D 2743 : 1968 : R2010 | Standard Practices for Uniformity of Traffic Paint Vehicle Solids by Spectroscopy and Gas Chromatography (Withdrawn 2015) |
ASTM C 1065 : 2008 | Standard Specification for Nuclear-Grade Zirconium Oxide Powder |
ASTM D 1596 : 2014 : REDLINE | Standard Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material |
ASTM C 1334 : 2005 : R2010 | Standard Specification for Uranium Oxides with a <sup>235</sup>U Content of Less Than 5 % for Dissolution Prior to Conversion to Nuclear-Grade Uranium Dioxide |
ASTM D 7390 : 2007 | Standard Guide for Evaluating Asbestos in Dust on Surfaces by Comparison Between Two Environments |
ASTM F 1631 : 1995 | Standard Test Method for Impact Attenuation Properties of Body Padding and Protective Wear for the Sport of Fencing (Withdrawn 2003) |
ASTM C 1862 : 2017 | Standard Test Method for the Nominal Joint Strength of End-Plug Joints in Advanced Ceramic Tubes at Ambient and Elevated Temperatures |
ASTM D 2221 : 2001 : R2015 | Standard Test Method for Creep Properties of Package Cushioning Materials |
ASTM D 1933 : 2003 : R2008 | Standard Specification for Nitrogen Gas as an Electrical Insulating Material |
ASTM E 456 : 2013 : REV A : EDT 1 | Standard Terminology Relating to Quality and Statistics |
ASTM C 823 : 2000 | Standard Practice for Examination and Sampling of Hardened Concrete in Constructions |
ASTM F 1819 : 2007 | Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood Using a Mechanical Pressure Technique |
ASTM D 5644 : 2001 | Standard Test Methods for Rubber Compounding Materials—Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber |
ASTM F 778 : 1988 : R2007 | Standard Methods for Gas Flow Resistance Testing of Filtration Media |
ASTM E 688 : 1994 : R2006 | Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing |
ASTM C 684 : 1999 | Standard Test Method for Making, Accelerated Curing, and Testing Concrete Compression Test Specimens |
ASTM D 345 : 2002 | Side bearings of the freight wagon bogies. General specifications |
ASTM D 7707 : 2011 : R2016 | Standard Specification for Wipe Sampling Materials for Beryllium in Surface Dust |
ASTM D 3198 : 1997 | Standard Test Method for Application and Removal Torque of Threaded or Lug-Style Closures |
ASTM E 1706 : 2005 : R2010 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates (Withdrawn 2019) |
API 3000 : 2014 | CLASSIFYING AND LOADING OF CRUDE OIL INTO RAIL TANK CARS |
ASTM D 5603 : 2001 | Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber |
ASTM D 3637 : 1984 : R1991 | Standard Test Methods for Permeability of Bituminous Mixtures (Withdrawn 1998) |
ASTM F 1015 : 2003 : R2017 | Standard Test Method for Relative Abrasiveness of Synthetic Turf Playing Surfaces |
ASTM D 3469 : 1997 : R2002 | Standard Test Methods for Measurement of Vertical Downward Forces to Disengage Type IIA Lug-Style Child-Resistant Closures |
ASTM D 2221 : 2001 | Standard Test Method for Creep Properties of Package Cushioning Materials |
ASTM E 456 : 2013 : REV A : EDT 4 | Standard Terminology Relating to Quality and Statistics |
NACE RP 02 90 : 0 | IMPRESSED CURRENT CATHODIC PROTECTION OF REINFORCING STEEL IN ATMOSPHERICALLY EXPOSED CONCRETE STRUCTURES |
ASTM D 3481 : 2006 : R2011 | Standard Test Method for Manual Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions (Withdrawn 2018) |
ASTM D 245 : 2006 | Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber |
ASTM E 1706 : 2005 : EDT 1 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates |
ASTM D 979/D979M : 2015 : REDLINE | Standard Practice for Sampling Bituminous Paving Mixtures |
ASTM C 750 : 2009 : R2014 | Standard Specification for Nuclear-Grade Boron Carbide Powder |
ASTM C 922 : 2014 : REDLINE | Standard Specification for Sintered Gadolinium Oxide-Uranium Dioxide Pellets |
ASTM D 3323 : 1980 : R1988 : EDT 1 | Guide for Testing Interior Solvent-Thinned Flat Wall Paints (Withdrawn 1993) |
ASTM C 823/C823M : 2012 : R2017 | Standard Practice for Examination and Sampling of Hardened<brk/> Concrete in Constructions |
ASTM D 4271 : 1988 : R1994 | Standard Practice for Writing Statements on Sampling in Test Methods for Textiles |
ASTM D 4203 : 2017 : REDLINE | Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials |
ASTM F 778 : 1988 : R1993 | Standard Methods for Gas Flow Resistance Testing of Filtration Media |
ASTM D 3472 : 1997 : R2002 | Standard Test Method for Reverse-Ratchet Torque of Type IA Child-Resistant Closures |
ASTM D 3469 : 1997 : R2007 | Standard Test Methods for Measurement of Vertical Downward Forces to Disengage Type IIA Lug-Style Child-Resistant Closures (Withdrawn 2016) |
ASTM F 1862/F1862M : 2017 : REDLINE | Standard Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a Known Velocity) |
ASTM C 1334 : 2005 : EDT 1 | Standard Specification for Uranium Oxides with a <sup>235</sup>U Content of Less Than 5 % for Dissolution Prior to Conversion to Nuclear-Grade Uranium Dioxide |
ASTM C 784 : 2016 : REDLINE | Standard Specification for Nuclear-Grade Aluminum Oxide-Boron Carbide Composite Pellets |
ASTM D 7390 : 2007 : R2012 | Standard Guide for Evaluating Asbestos in Dust on Surfaces by Comparison Between Two Environments |
ASTM C 1092 : 1994 | Specification for Glass Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Withdrawn 1995) |
ASTM C 833 : 2017 : REDLINE | Standard Specification for Sintered (Uranium-Plutonium) Dioxide Pellets for Light Water Reactors |
ASTM C 1076 : 2009 | Standard Specification for Nuclear Grade Hafnium Oxide Pellets |
ASTM F 1407 : 2012 : R2017 | Standard Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeation—Permeation Cup Method |
ASTM C 1008 : 1999 : R2008 | Standard Specification for Sintered (Uranium-Plutonium) Dioxide<br> Pellets<span class='unicode'>—</span>Fast Reactor Fuel (Withdrawn 2014) |
ASTM E 1908 : 2016 : REDLINE | Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb) |
ASTM D 1933 : 2003 | Standard Specification for Nitrogen Gas as an Electrical Insulating Material |
ASTM D 4464 : 2015 : REDLINE | Standard Test Method for Particle Size Distribution of Catalytic Materials by Laser Light Scattering |
ASTM F 1407 : 2012 | Standard Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeation—Permeation Cup Method |
ASTM D 3123 : 2009 | Standard Test Method for Spiral Flow of Low-Pressure Thermosetting Molding Compounds |
ASTM C 752 : 2013 | Standard Specification for Nuclear-Grade Silver-Indium-Cadmium Alloy |
ASTM E 688 : 1994 : R2011 | Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing (Withdrawn 2019) |
ASTM C 888 : 2003 : R2008 | Standard Specification for Nuclear-Grade Gadolinium Oxide (Gd<sub>2</sub>O<sub>3</sub>) Powder |
ASTM D 2221 : 2001 : R2010 | Standard Test Method for Creep Properties of Package Cushioning Materials |
ASTM D 5603 : 2001 : R2008 | Standard Classification for Rubber Compounding Materials<span class='unicode'>—</span>Recycled Vulcanizate Particulate Rubber |
ASTM D 7964/D7964M : 2014 | Standard Test Method for Determining Activity of Fluid Catalytic Cracking (FCC) Catalysts in a Fluidized Bed |
ASTM F 1015 : 2003 : R2009 | Standard Test Method for Relative Abrasiveness of Synthetic Turf Playing Surfaces |
ASTM C 684 : 1999 : R2003 | Standard Test Method for Making, Accelerated Curing, and Testing Concrete Compression Test Specimens (Withdrawn 2012) |
ASTM D 2940/D2940M : 2015 : REDLINE | Standard Specification for Graded Aggregate Material For Bases or Subbases for Highways or Airports |
AASHTO R 38 : 2010 : R2013 | PRACTICE FOR QUALITY ASSURANCE OF STANDARD MANUFACTURED MATERIALS |
ASTM E 1792 : 2003 : R2016 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
ASTM F 1499 : 2017 : REDLINE | Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV) |
ASTM D 6763 : 2016 : REDLINE | Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents |
ASTM C 1008 : 1999 | Standard Specification for Sintered (Uranium-Plutonium) Dioxide Pellets-Fast Reactor Fuel |
ACI 228.1R : 2003 | IN-PLACE METHODS TO ESTIMATE CONCRETE STRENGTH |
ASTM C 1031 : 2011 : R2016 | Standard Specification for Nuclear-Grade Aluminum Oxide Powder |
ASTM D 6883 : 2017 : REDLINE | Standard Practice for Manual Sampling of Stationary Coal from Railroad Cars, Barges, Trucks, or Stockpiles |
ASTM D 5603 : 2001 : R2015 | Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber |
ASCE/SEI 30 14 : 2014 | GUIDELINE FOR CONDITION ASSESSMENT OF THE BUILDING ENVELOPE |
ASTM D 3968 : 1997 : R2007 | Standard Test Method for Monitoring of Rotational Torque of Type IIIA Child-Resistant Closures (Withdrawn 2016) |
ASTM D 4481 : 2010 : R2015 | Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts |
ASTM C 92 : 1995 | TEST METHODS FOR SIEVE ANALYSIS AND WATER CONTENT OF REFRACTORY MATERIALS |
ASTM D 3283 : 1998 : R2012 | Standard Specification for Air as an Electrical Insulating Material |
ASTM D 3469 : 1997 | Standard Test Methods for Measurement of Vertical Downward Forces to Disengage Type IIA Lug-Style Child-Resistant Closures |
ASTM C 708 : 2016 : REDLINE | Standard Specification for Nuclear-Grade Beryllium Oxide Powder |
ASTM C 802 : 2014 : REDLINE | Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials |
ASTM D 2940 : 2003 | Standard Specification for Graded Aggregate Material For Bases or Subbases for Highways or Airports |
ASTM E 1792 : 2003 : R2011 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
ASTM D 75 : 2003 | Standard Practice for Sampling Aggregates |
ASTM D 5324 : 2016 : REDLINE | Standard Guide for Testing Water-Borne Architectural Coatings |
ASTM C 823/C823M : 2012 | Standard Practice for Examination and Sampling of Hardened<brk> Concrete in Constructions |
GOST 849:2018 | Primary nickel. SpecificationsE |
ASTM E 1706 : 2005 | Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates |
ASTM E 456 : 2013 : REV A : EDT 2 | Standard Terminology Relating to Quality and Statistics |
AASHTO R 42 : 2006 : R2011 | PRACTICE FOR DEVELOPING A QUALITY ASSURANCE PLAN FOR HOT MIX ASPHALT (HMA) |
ASTM E 2548 : 2016 : REDLINE | Standard Guide for Sampling Seized Drugs for Qualitative and Quantitative Analysis |
ASTM D 3123 : 2009 : R2017 | Standard Test Method for Spiral Flow of Low-Pressure Thermosetting Molding Compounds |
ASTM E 456 : 2013 : REV A : R2017 : EDT 1 | Standard Terminology Relating to Quality and Statistics |
ASTM D 3472 : 1997 : R2007 | Standard Test Method for Reverse-Ratchet Torque of Type IA Child-Resistant Closures (Withdrawn 2016) |
ASTM D 245 : 2006 : R2011 | Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber |
ASTM D 4463 : 1996 | Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts |
ASTM C 750 : 2009 | Standard Specification for Nuclear-Grade Boron Carbide Powder |
ASTM D 75/D75M : 2014 : REDLINE | Standard Practice for Sampling Aggregates |
ASTM D 5536 : 2017 : REDLINE | Standard Practice for Sampling Forest Trees for Determination of Clear Wood Properties |
ASTM D 2932 : 1980 : R1988 : EDT 1 | Guide for Testing Exterior Solvent-Based House and Trim Coatings (Withdrawn 1993) |
ASTM C 1868 : 2018 | Standard Practice for Ceramographic Preparation of UO<inf>2</inf> and Mixed Oxide (U,Pu)O<inf>2</inf> Pellets for Microstructural Analysis |
ASTM D 7707 :2011 | Standard Specification for Wipe Sampling Materials for Beryllium in Surface Dust |
ASTM D 3481 : 2006 | Standard Test Method for Manual Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions |
ASTM D 2743 : 1968 : R2004 | Standard Practices for Uniformity of Traffic Paint Vehicle Solids by Spectroscopy and Gas Chromatography |
ASTM D 5644 : 2001 : R2008 : EDT 1 | Standard Test Methods for Rubber Compounding Materials Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber |
ASTM C 888 : 2003 | Standard Specification for Nuclear-Grade Gadolinium Oxide (Gd<sub>2</sub>O<sub>3</sub>) Powder |
ASTM E 1792 : 2003 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
ASTM D 3665 : 2012 | Standard Practice for Random Sampling of Construction Materials |
ASTM C 1066 : 2009 : R2015 | Standard Specification for Nuclear Grade Zirconium Oxide Pellets |
ASTM C 1334 : 2005 : R2016 : EDT 1 | Standard Specification for Uranium Oxides with a <sup>235</sup>U Content of Less Than 5 % for Dissolution Prior to Conversion to Nuclear-Grade Uranium Dioxide |
ASTM D 3283 : 1998 | Standard Specification for Air as an Electrical Insulating Material |
ASTM D 3968 : 1997 | Standard Test Method for Monitoring of Rotational Torque of Type IIIA Child-Resistant Closures |
ASTM D 4463/D4463M : 1996 : R2012 : EDT 1 | Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts |
ASTM D 5644 : 2001 : R2008 | Standard Test Methods for Rubber Compounding Materials Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber |
ASTM B 579 : 1973 : R2009 | Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate) |
ASTM D 2915 : 2017 : REDLINE | Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products |
ASTM C 785 : 2008 : R2015 | Standard Specification for Nuclear-Grade Aluminum Oxide Pellets |
ASTM D 7257 : 2006 | Standard Test Method for Automated Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions |
ASTM D 3968 : 1997 : R2002 | Standard Test Method for Monitoring of Rotational Torque of Type IIIA Child-Resistant Closures |
ASTM E 122 : 2017 : REDLINE | Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.