BS EN 60269-1 : 2007
Current
The latest, up-to-date edition.
LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS
Hardcopy , PDF
English
01-01-2007
INTRODUCTION
1 General
2 Terms and definitions
3 Conditions for operation in service
4 Classification
5 Characteristics of fuses
6 Markings
7 Standard conditions for construction
8 Tests
Annex A (informative) - Measurement of short-circuit
power factor
Annex B (informative) - Calculation of pre-arcing I[2]t
values for 'gG', 'gM', 'gD' and
'gN' fuse-links and calculation
of operating I[2]t values at
reduced voltage
Annex C (informative) - Calculation of cut-off current-time
characteristics
Annex D (informative) - Effect of change of ambient
temperature and surroundings on
the performance of fuse-links
Annex E (normative) - Particular requirements for fuse-bases with
screwless-type terminals for external copper conductors
BIBLIOGRAPHY
Annex ZA (normative) - Normative references to international
publications with their corresponding
European publications
Pertains to fuses incorporating enclosed current-limiting fuse-links with rated breaking capacities of not less than 6 kA, intended for protecting power-frequency a.c. circuits of nominal voltages not exceeding 1000 V or d.c. circuits of nominal voltages not exceeding 1500 V.
Committee |
PEL/32
|
DevelopmentNote |
Renumbers and supersedes BS 88-1(1988). 1994 version incorporates amendment 8310 to BS 88-1(1988). Supersedes BS 88-1(1975). (03/2006) Also numbered as BS 88-1(2007). Together with BS 88-1(2007) & BS 88-2(2007) supersedes BS EN 60269-2. & with BS 88-3(2007) & BS 88-1(2007) supersedes BS EN 60269-3. (06/2007) Supersedes 05/30135633 DC, 97/208658 DC & 03/100219 DC. (07/2007) 2007 + A1 2009 Edition is remains current and will be withdrawn on 04/08/2017. Supersedes BS 88-3.1(1995). 2007 Edition Re-Issued in October 2014 & incorporates AMD 2 2014. Supersedes 13/30278215 DC. (11/2014)
|
DocumentType |
Standard
|
Pages |
92
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
Standards | Relationship |
DIN EN 60269-1 : 2015 | Identical |
NBN EN 60269-1 : 2007 AMD 2 2014 | Identical |
I.S. EN 60269-1:2007 | Identical |
NF EN 60269-1 : 2007 AMD 2 2014 | Identical |
UNE-EN 60269-1:2008 | Identical |
IEC 60269-1:2006+AMD1:2009+AMD2:2014 CSV | Identical |
SN EN 60269-1 : 1998 | Identical |
EN 60269-1:2007/A2:2014 | Identical |
BS 88-1(1988) : 1988 AMD 8310 | Identical |
09/30181298 DC : 0 | BS 7657 - SPECIFICATION FOR FUSES (CUT-OUTS), ANCILLARY TERMINAL BLOCKS AND INTERCONNECTING UNITS UP TO 100 A RATING, FOR POWER SUPPLIES TO BUILDINGS |
ENA ER G81-5 : ISSUE 2 2016 | FRAMEWORK FOR NEW INDUSTRIAL AND COMMERCIAL UNDERGROUND CONNECTIONS - PART 5: MATERIALS SPECIFICATION |
BS 7671(2008) : 2018 | REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - IET WIRING REGULATIONS |
BS 7430:1998 | Code of practice for earthing |
BS 7856:2017 | Specification for special design and other features of alternating current watthour meters for active energy for use in the UK (Accuracy Classes A and B) |
DEFSTAN 02-530/2(2004) : 2004 | REQUIREMENTS FOR MAIN AND DISTRIBUTION SWITCHGEAR - CATEGORY 2 |
BS DD8431(2005) : 2005 | ELECTRICAL STATIC METERS FOR SECONDARY METERING AND SUB-METERING - SPECIFICATION |
BS 7375:1996 | Code of practice for distribution of electricity on construction and building sites |
BS 7654:1997 | Specification for single phase street lighting fuses (cut-outs) for low-voltage public electricity distribution systems. 25 A rating for highway power supplies and street furniture |
BS 7654:2010 | Specification for single-phase street lighting cut-out assemblies for low-voltage public electricity distribution systems. 25 A rating for highway power supplies and street furniture |
BS EN 60269-3:1995 | BS Low-voltage fuses Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) |
13/30283398 DC : 0 | BS 7656+A1 - SPECIFICATION FOR LOW-VOLTAGE POLE-MOUNTING FUSES (CUT-OUTS) - 315 ARATING |
ENA ER G81-2 : ISSUE 2 2016 | FRAMEWORK FOR NEW LOW VOLTAGE HOUSING DEVELOPMENT INSTALLATIONS - PART 2: MATERIALS SPECIFICATION |
BS 88-3.1(1995) : 1995 | LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) |
09/30181290 DC : 0 | BS 7654 - SPECIFICATION FOR SINGLE-PHASE STREET LIGHTING FUSES (CUT-OUTS) FOR LOW-VOLTAGE PUBLIC ELECTRICITY DISTRIBUTION SYSTEMS - 25 A RATING FOR HIGHWAY POWER SUPPLIES AND STREET FURNITURE |
BS EN 61268:1996 | Alternating current static var-hour meters for reactive energy (classes 2 and 3) |
BS 7656(1993) : 1993 | SPECIFICATION FOR LOW-VOLTAGE POLE-MOUNTING FUSES (CUT-OUTS) - 400 A RATING |
BS 7657:2010 | Specification for cut-out assemblies up to 100 A rating, for power supply to buildings |
16/30348626 DC : 0 | BS 7856:2017 - SPECIFICATION FOR SPECIAL DESIGN AND OTHER FEATURES OF ALTERNATING CURRENT WATTHOUR METERS FOR ACTIVE ENERGY FOR USE IN THE UK (ACCURACY CLASSES A AND B) |
BS 7671(2008) : 2008 | REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - IET WIRING REGULATIONS |
EN 60269-6:2011 | Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems |
IEC 60038:2009 | IEC standard voltages |
IEC 60228:2004 | Conductors of insulated cables |
IEC 60269-4:2009+AMD1:2012+AMD2:2016 CSV | Low-voltage fuses - Part 4: Supplementary requirements forfuse-links for the protection of semiconductor devices |
IEC 60269-6:2010 | Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems |
IEC 60127:1974 | Cartridge fuse-links for miniature fuses |
IEC 60050-441:1984 | International Electrotechnical Vocabulary (IEV) - Part 441: Switchgear, controlgear and fuses |
IEC 60269-2:2013+AMD1:2016 CSV | Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K |
ISO 3:1973 | Preferred numbers Series of preferred numbers |
IEC 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) |
EN 60228:2005 COR 2005 | CONDUCTORS OF INSULATED CABLES |
ISO 478:1974 | Paper — Untrimmed stock sizes for the ISO-A Series — ISO primary range |
HD 472 S1:1989/AC:2013 | NOMINAL VOLTAGES FOR LOW-VOLTAGE PUBLIC ELECTRICITY SUPPLY SYSTEMS |
IEC 60695-2-13:2010+AMD1:2014 CSV | Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods- Glow-wire ignition temperature (GWIT) test method for materials |
EN 60695-2-13:2010/A1:2014 | FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS (IEC 60695-2-13:2010/A1:2014) |
EN 60269-4:2009/A2:2016 | LOW-VOLTAGE FUSES - PART 4: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SEMICONDUCTOR DEVICES (IEC 60269-4:2009/A2:2016) |
IEC 60695-2-12:2010+AMD1:2014 CSV | Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods- Glow-wire flammability index (GWFI) test method for materials |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
IEC 60269-3:2010+AMD1:2013 CSV | Low-voltage fuses - Part 3: Supplementary requirements for fuses foruse by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F |
EN 60695-2-10:2013 | Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
EN 60584-1:2013 | Thermocouples - Part 1: EMF specifications and tolerances |
IEC 60364-3:1993 | Electrical installations of buildings - Part 3: Assessment of general characteristics |
EN 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
ISO 4046:1978 | Paper, board, pulp and related terms — Vocabulary |
HD 60269-2:2013 | Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K |
IEC TR 60269-5:2014 | Low-voltage fuses - Part 5: Guidance for the application of low-voltage fuses |
IEC 60947-3:2008+AMD1:2012+AMD2:2015 CSV | Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units |
ISO 593:1974 | Paper Untrimmed stock sizes for the ISO-A Series ISO supplementary range |
EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
HD 384.3 : 200S2 | ELECTRICAL INSTALLATIONS OF BUILDINGS - ASSESSMENT OF GENERAL CHARACTERISTICS |
IEC 60695-2-10:2013 | Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
EN 60695-2-12:2010/A1:2014 | FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS (IEC 60695-2-12:2010/A1:2014) |
IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
IEC 60584-1:2013 | Thermocouples - Part 1: EMF specifications and tolerances |
HD 60269-3:2010/A1:2013 | LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F |
IEC 60364-5-52:2009 | Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems |
EN 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) (IEC 60695-2-11:2014) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.