EN 15687:2010
|
Railway applications - Testing for the acceptance of running characteristics of freight vehicles with static axle loads higher than 225 kN and up to 250 kN
|
EN 15437-1:2009
|
Railway applications - Axlebox condition monitoring - Interface and design requirements - Part 1: Track side equipment and rolling stock axlebox
|
EN 14200:2004
|
Railway applications - Suspension components - Parabolic springs, steel
|
PREN 15437-2 : DRAFT 2010
|
RAILWAY APPLICATIONS - AXLEBOX CONDITION MONITORING - PERFORMANCE REQUIREMENTS - PART 2: ONBOARD SYSTEMS FOR TEMPERATURE MONITORING
|
EN 15313:2016
|
Railway applications - In-service wheelset operation requirements - In-service and off-vehicle wheelset maintenance
|
EN 14363:2016
|
Railway applications - Testing and Simulation for the acceptance of running characteristics of railway vehicles - Running Behaviour and stationary tests
|
EN ISO 6892-1:2016
|
Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016)
|
EN 15085-1:2007+A1:2013
|
Railway applications - Welding of railway vehicles and components - Part 1: General
|
EN 13715:2006+A1:2010
|
Railway applications - Wheelsets and bogies - Wheels - Tread profile
|
EN 14817:2006
|
Railway applications - Suspension components - Air spring control elements
|
EN 15839:2012+A1:2015
|
Railway applications - Testing for the acceptance of running characteristics of railway vehicles - Freight wagons - Testing of running safety under longitudinal compressive forces
|
EN 14535-2:2011
|
Railway applications - Brake discs for railway rolling stock - Part 2: Brake discs mounted onto the wheel, dimensions and quality requirements
|
EN 15049:2007
|
Railway applications - Suspension components - Torsion bar, steel
|
EN 12299:2009
|
Railway applications - Ride comfort for passengers - Measurement and evaluation
|
EN 12080:2017
|
Railway applications - Axleboxes - Rolling bearings
|
EN 12081:2017
|
Railway applications - Axleboxes - Lubricating greases
|
EN 15085-5:2007
|
Railway applications - Welding of railway vehicles and components - Part 5: Inspection, testing and documentation
|
EN ISO 3095:2013
|
Acoustics - Railway applications - Measurement of noise emitted by railbound vehicles (ISO 3095:2013)
|
EN 14535-1:2005+A1:2011
|
RAILWAY APPLICATIONS - BRAKE DISCS FOR RAILWAY ROLLING STOCK - PART 1: BRAKE DISCS PRESSED OR SHRUNK ONTO THE AXLE OR DRIVE SHAFT, DIMENSIONS AND QUALITY REQUIREMENTS
|
EN 473:2008
|
Non-destructive testing - Qualification and certification of NDT personnel - General principles
|
EN 12082:2017
|
Railway applications - Axleboxes - Performance testing
|
EN 15273-2:2013+A1:2016
|
Railway applications - Gauges - Part 2: Rolling stock gauge
|
EN 15892:2011
|
Railway applications - Noise Emission - Measurement of noise inside driver's cabs
|
EN 15273-1:2013+A1:2016/AC:2017
|
RAILWAY APPLICATIONS - GAUGES - PART 1: GENERAL - COMMON RULES FOR INFRASTRUCTURE AND ROLLING STOCK
|
EN 15227:2008+A1:2010
|
Railway applications - Crashworthiness requirements for railway vehicle bodies
|
EN 50125-1:2014
|
Railway applications - Environmental conditions for equipment - Part 1: Rolling stock and on-board equipment
|
EN 13913:2003
|
Railway applications - Rubber suspension components - Elastomer-based mechanical parts
|
EN 13104:2009+A2:2012
|
Railway applications - Wheelsets and bogies - Powered axles - Design method
|
EN 13261:2009+A1:2010
|
Railway applications - Wheelsets and bogies - Axles - Product requirements
|
EN 13597:2003
|
Railway applications - Rubber suspension components - Rubber diaphragms for pneumatic suspension springs
|
EN 15528:2015
|
Railway applications - Line categories for managing the interface between load limits of vehicles and infrastructure
|
EN 13298:2003
|
Railway applications - Suspension components - Helical suspension springs, steel
|
EN 13262:2004+A2:2011
|
Railway applications - Wheelsets and bogies - Wheels - Product requirements
|
EN 13802:2013
|
Railway applications - Suspension components - Hydraulic dampers
|
EN 15663:2017
|
Railway applications - Vehicle reference masses
|
EN 13260:2009+A1:2010
|
Railway applications - Wheelsets and bogies - Wheelsets - Product requirements
|
EN 12663-1:2010+A1:2014
|
Railway applications - Structural requirements of railway vehicle bodies - Part 1: Locomotives and passenger rolling stock (and alternative method for freight wagons)
|
EN 15085-2:2007
|
Railway applications - Welding of railway vehicles and components - Part 2: Quality requirements and certification of welding manufacturer
|
EN 13103:2009+A2:2012
|
Railway applications - Wheelsets and bogies - Non powered axles - Design method
|
EN 13979-1:2003+A2:2011
|
Railway applications - Wheelsets and bogies - Monobloc wheels - Technical approval procedure - Part 1: Forged and rolled wheels
|
EN 12663-2:2010
|
Railway applications - Structural requirements of railway vehicle bodies - Part 2: Freight wagons
|
EN 13749:2011
|
Railway applications - Wheelsets and bogies - Method of specifying the structural requirements of bogie frames
|
EN 15085-3:2007/AC:2009
|
RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 3: DESIGN REQUIREMENTS
|
EN 15686:2010
|
Railway applications - Testing for the acceptance of running characteristics of railway vehicles with cant deficiency compensation system and/or vehicles intended to operate with higher cant deficiency than stated in EN 14363:2005, Annex G
|
EN 15085-4:2007
|
Railway applications - Welding of railway vehicles and components - Part 4: Production requirements
|