Customer Support: 131 242

  • Shopping Cart
    There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert
Wiring Rules bundle. AS/NZS 3000 + 3008.1.1 with 10% off already included. Shop Now

Psychosocial Risk at Work: The Standards Helping Organisations Act

Psychosocial risk is now a core part of work health and safety. WHS laws also require employers to manage psychosocial hazards just like physical ones.

October brings the topic into focus with World Mental Health Day and National Safe Work Month, but the work continues all year.

This guide explains how ISO 45003, CSA Z1003 and ANSI/ASSP Z10.0 help you identify, assess and control psychosocial risk, and which standards apply in each region.

 

Key Takeaways

  • Psychosocial risk is a work health and safety topic, managed alongside physical hazards.
  • ISO 45003 offers guidelines, while ISO 45001, CSA Z1003 and ANSI/ASSP Z10.0 set out management system requirements.
  • A management system approach can help you identify, assess and control psychosocial hazards with your employees.

Why Psychosocial Risk Matters at Work

Psychosocial hazards are aspects of work that can cause psychological harm, such as high job demands or poor support. Safe Work Australia reports that mental health (non-physical) conditions made up 12% of serious workers’ compensation claims in 2023-24. These are claims involving at least one week of lost work.

In Great Britain, the Health and Safety Executive (HSE) estimates that 964,000 workers suffered from work-related stress, depression or anxiety in 2024/25. That accounted for 52% of all work-related ill health and 62% of the working days lost to it.

These studies highlight why a structured, repeatable approach is essential, like identifying hazards, involving workers in the process and reviewing results. Management system standards can help support that approach.

Psychosocial Risk Standards: ISO 45003, CSA Z1003 & ANSI/ASSP Z10

A single standard cannot cover all cases of psychosocial risk. These frameworks help organisations manage it in a structured way. 


ISO 45003: The International Guideline for Psychosocial Risk
 

 ISO 45003:2021, which was published in June 2021, is a companion standard of ISO 45001 and provides the guidelines for managing psychosocial risk within an ISO 45001-based system. 

Meanwhile, ISO 45001:2018 sets out the requirements for an occupational health and safety (OH&S) management system. For a full overview, read our guide to ISO 45001. 

CSA Z1003: Canada's Psychological Health and Safety Standard 

CAN/CSA-Z1003-13/BNQ 9700-803/2013 (R2022) is a National Standard of Canada. It specifies a documented, systematic approach to developing and sustaining a psychologically healthy and safe workplace.  

It also covers identifying hazards, assessing and controlling risks and building a supportive culture. Its guiding principles include shared responsibility among workplace stakeholders. 

ANSI/ASSP Z10.0: US Requirements for Health and Hazard Management 

In the United States, ANSI/ASSP Z10.0-2019 defines the requirements for an OH&S management system. Its format aligns more closely with ISO management system standards, including ISO 45001. For US organisations, this framework treats psychosocial hazards just like any other workplace risk. 

How Psychosocial Risk Standards Compare by Region

While workplace mental health is a global priority, the specific frameworks and compliance requirements differ across borders. Here’s a side-by-side comparison of which standards apply to your regional teams.

 

Region Publisher Standards to review
APAC (Australia) ISO & Standards Australia (for local AS/NZS adoptions) ISO 45001:2018; ISO 45001:2018/Amd 1:2024; ISO 45003:2021; national adoptions such as AS/NZS ISO 45003:2021
EMEA (Europe) ISO & BSI (British Standards Institution) ISO 45001:2018; ISO 45003:2021; national adoptions such as BS ISO 45003:2021
AMER (Canada) CSA Group (Canadian Standards Association) & BNQ (Bureau de normalisation du Québec) CAN/CSA-Z1003-13/BNQ 9700-803/2013 (R2022)
AMER (United States) ANSI (American National Standards Institute) & ASSP (American Society of Safety Professionals) ANSI/ASSP Z10.0-2019

 

Many organisations review the ISO standards alongside their regional versions since national adoptions can differ from the international text. Confirm if you have the right edition for your region.

An organisation with sites in Australia, the UK and Canada may refer to three sets of regional guidance. A shared management system based on ISO 45001 can give those sites a common structure, while local guidance provides details on its application.

Steps to Managing Psychosocial Hazards

A management system approach turns good intentions into a repeatable process. Here's a simple path you can follow. 

  1. Consult your employees. Involve them early, including worker representatives where they exist. Their experience of how work is done gives you valuable insight into building your system. 

  2. Identify psychosocial hazards. Look at areas such as job demands and how work is organised. Safe Work Australia's model Code of Practice describes common hazards in the workplace in detail. 

  3. Assess the risks. Consider the likelihood of each hazard causing harm and how serious that harm could be. Record your findings so you can compare results over time. 

  4. Implement the controls. Where you can, eliminate the hazard, like cutting unnecessary reporting. Where you can't, reduce the risk, like redesigning workflows. 

  5. Review and improve. Monitor metrics, like EAP usage or staff turnover. When your workplace restructures, adapt your safety controls to match. 

  6. Confirm your obligations. Standards can help support compliance, but they don't replace your legal obligations. 

ISO 45003 offers guidelines for this kind of process within an ISO 45001-based system. These steps focus on managing work-related risk. They’re not medical or clinical advice. 

Common Challenges When Applying Psychosocial Risk Standards

Organisations often meet a few obstacles, but most are easy to plan around. Here are some of those common challenges and how you can resolve them. 

  • Mixing up guidelines and requirements. ISO 45003 provides guidelines, while ISO 45001 and CSA Z1003 specify requirements. Read the scope before establishing your controls. 
  • Confusing international and national editions. Confirm the editions you're working from. Check whether you have the right adoption and the current edition for your region. 
  • Treating it as a one-off task. Workplaces evolve, and so do employee stressors. Schedule regular check-ins to ensure your safety measures still apply during company restructures or busy seasons. 
  • Applying one region's approach everywhere. What keeps you compliant in Sydney may not apply in Toronto. Tailor your core management systems to align with the specific local guidelines of each of your branches. 

Key Takeaways for a Psychologically Safe Workplace

Psychosocial risk is part of safe and healthy work, and October's campaigns show it's a priority across regions. Standards give you a clear, structured way to support your employees’ mental health. ISO 45003 helps you manage psychosocial risk within an ISO 45001 system, while CSA Z1003 and ANSI/ASSP Z10.0 offer regional options.  

Start by reviewing which of these standards apply to your sites and confirming if you have the current editions. Intertek Inform brings these standards together in one place, and with StandardsWatch, you’ll be alerted when a standard you use changes. 

Find the Right Health and Safety Standards

Strengthen your organisation’s approach to psychosocial risk with access to the latest standards for occupational health and safety, psychological health and management systems.

Frequently asked questions

Psychosocial hazards are aspects of work that can cause psychological harm, such as high job demands or poor support. The chance that they cause harm is known as psychosocial risk. 

ISO 45003:2021 gives guidelines for managing psychosocial risk within an OH&S management system based on ISO 45001. It applies to organisations of all sizes and sectors. Canada also has CAN/CSA-Z1003-13/BNQ 9700-803/2013 (R2022), which specifies a systematic approach. 

ISO 45001:2018 sets out the requirements for an OH&S management system. ISO 45003:2021 is a guidelines document that builds on ISO 45001 and focuses on psychosocial risk. You apply ISO 45003 within an ISO 45001-based system. 

Use a management system approach. Consult workers, identify psychosocial hazards, assess the risks, put controls in place, then review and improve any gaps in your system. Standards such as ISO 45003 offer guidelines for this process. 

ISO 45003 provides guidelines, and standards don't replace your legal obligations. Standards can help support compliance, but obligations vary by jurisdiction.