ANSI INCITS 338 : 2003
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
HIGH-PERFORMANCE PARALLEL INTERFACE - 6400 MBIT/S OPTICAL SPECIFICATION (HIPPI-6400-OPT)
Hardcopy , PDF
English
01-01-2003
22-04-2024
Foreword
1 Scope
2 Normative references
2.1 Approved references
2.2 References under development
3 Definitions and conventions
3.1 Definitions
3.2 Editorial conventions
3.3 Acronyms and other abbreviations
3.4 Symbols
4 System overview
5 Electrical interface
5.1 Signal characteristics
5.2 Optical transmitter electrical interface
5.3 Optical receiver electrical interface
6 Optical specifications
6.1 Optical output interface
6.2 Optical input interface
7 Jitter budget
8 Optical fiber cable plant
8.1 Modal bandwidth
8.2 Cable plant loss budget
8.3 Optical return loss
9 Optical interface connectors
9.1 MPO connector
9.2 SMC connector
Annexes
A Operating distances
B Optical measurement techniques
Describes a media-level, point-to-point, 12-channel, full-duplex, electrical/optical interface, with each channel operating at 500 Mbit/s or 1 Gbit/s. Multimode (MM) fiber cables, and single-mode (SM) fiber cables, are used for distances up to 1 km when carrying the HIPPI-6400-PH protocol. Differential signals are used on the electrical side.
| Committee |
T11
|
| DocumentType |
Standard
|
| Pages |
36
|
| PublisherName |
Information Technology Industry Council
|
| Status |
Superseded
|
| SupersededBy |
| IEC 60825-2:2004+AMD1:2006+AMD2:2010 CSV | Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS) |
| TIA 526-11 : 91(R2014) | OFSTP-11 - MEASUREMENT OF SINGLE-REFLECTION POWER PENALTY FOR FIBER OPTIC TERMINAL EQUIPMENT |
| TIA/EIA 568 SET : C2009 | COMMERCIAL BUILDING TELECOMMUNICATIONS CABLING STANDARD SET |
| TIA/EIA 455-8 : 2000(R2008) | MEASUREMENT OF SPLICE OR CONNECTOR LOSS AND REFLECTANCE USING AN OTDR |
| IEC 60793-2:2015 | Optical fibres - Part 2: Product specifications - General |
| TIA/EIA 455-204 : A2013 | MEASUREMENT OF BANDWIDTH ON MULTIMODE FIBER |
| TIA 526-3 : 2007 | FIBER OPTIC TERMINAL EQUIPMENT RECEIVER SENSITIVITY AND MAXIMUM RECEIVER INPUT |
| IEC 60825-1:2014 | Safety of laser products - Part 1: Equipment classification and requirements |
| CFR 21(PTS800-1299) : 0 | FOOD AND DRUGS - FOOD AND DRUG ADMINISTRATION, CHAPTER 1 DEPARTMENT OF HEALTH AND HUMAN SERVICES - PARTS 800-1299 |
| TIA 455-107 : A1999 | DETERMINATION OF COMPONENT REFLECTANCE OR LINK/SYSTEM RETURN LOSS USING A LOSS TEST SET |
| IEC 61754-5:2005 | Fibre optic connector interfaces - Part 5: Type MT connector family |
| TIA/EIA 455-203 : A2009(R2014) | LIGHT SOURCE ENCIRCLED FLUX MEASUREMENT METHOD |
| TIA 526-14 : C2015 | OPTICAL POWER LOSS MEASUREMENTS OF INSTALLED MULTIMODE FIBER CABLE PLANT |
| TIA/EIA 455-34 : A1995(R2002) | INTERCONNECTION DEVICE INSERTION LOSS TEST |
| TIA 526-7 : A2015 | MEASUREMENT OF OPTICAL POWER LOSS OF INSTALLED SINGLE-MODE FIBER CABLE PLANT |
| TIA 455-127 : A2006(R2014) | FOTP-127-A - BASIC SPECTRAL CHARACTERIZATION OF LASER DIODES |
| IEC 61754-7:2008 | Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7: Type MPO connector family |
| TIA 526-4 : A1997 | OPTICAL EYE PATTERN MEASUREMENT PROCEDURE |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.