• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ANSI/NCSL Z540 1 : 94(R2002)

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

CALIBRATION - CALIBRATION LABORATORIES AND MEASURING AND TEST EQUIPMENT - GENERAL REQUIREMENTS
Superseded date

01-01-2007

Published date

12-01-2013

Describes a mechanism for promoting confidence in calibration laboratories and measuring and test equipment when it can be shown that they are operated in compliance with its requirements.

DevelopmentNote
Supersedes NCSL RP 4, RP 11 and MIL STD 45662 (06/2002) Handbook is also available for ANSI/NCSL Z540 1. (05/2003)
DocumentType
Standard
PublisherName
National Conference of Standards Laboratories
Status
Superseded
SupersededBy
Supersedes

ASTM D 7392 : 2007 Standard Practice for PM Detector and Bag Leak Detector Manufacturers to Certify Conformance with Design and Performance Specifications for Cement Plants
DSCC 04028 : 0 CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 452 CONTACT POSITIONS
07/30172770 DC : 0 BS ISO 10428 - PETROLEUM AND NATURAL GAS INDUSTRIES DOWNHOLE EQUIPMENT - DOWNHOLE EQUIPMENT - SUCKER RODS, COUPLINGS AND ANCILLARY EQUIPMENT
MIL E 5589 : D EARPHONE, (EXTENDED RANGE), H-301/U
NASA PRC 6001 : 2010 PROCESS SPECIFICATION FOR THE MANUFACTURE OF COMPOSITE LAMINATE PREPREG PARTS
DSCC 85136 : E HEAT SINKS, ELECTRICAL-ELECTRONIC COMPONENT, FIN STOCK, ALUMINIUM ALLOY
IEEE 1302-2008 IEEE Guide for the Electromagnetic Characterization of Conductive Gaskets in the Frequency Range of DC to 18 GHz
SAE AS 81914 : 2016 TUBING, PLASTIC, FLEXIBLE, CONVOLUTED, CONDUIT, GENERAL SPECIFICATION FOR
MIL PRF 25879 : D SWITCH, RADIO FREQUENCY TRANSMISSION LINE, COAXIAL TYPE SA-521A/A AND MOUNTING MT-1995/A
IEEE DRAFT 1309 : D2.0 2005 CALIBRATION OF ELECTROMAGNETIC FIELD SENSORS AND PROBES, EXCLUDING ANTENNAS, FROM 9 KHZ TO 40 GHZ
08/30168345 DC : DRAFT JULY 2008 BS ISO 15136-1 - DOWNHOLE EQUIPMENT FOR PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS
MIL-DTL-13623 Revision E:2010 SWITCH, ROTARY: 28 VOLT DC
MIL R 23285 : B RESISTOR, VARIABLE, NONWIRE WOUND GENERAL SPECIFICATION FOR
MIL-R-39008 Revision C:1990 RESISTOR, FIXED, COMPOSITION (INSULATED), ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
CSA C392 : 2011 TESTING OF THREE-PHASE SQUIRREL CAGE INDUCTION MOTORS DURING REFURBISHMENT
API 19G2 : 2010 FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS
AECTP-500 : 2016 ELECTROMAGNETIC ENVIRONMENTAL EFFECTS TESTS AND VERIFICATION
MIL D 83531 : A (3) DELAY LINES, PASSIVE
CSA C392 : 2011 : INC : UPD 2 : 2012 TESTING OF THREE-PHASE SQUIRREL CAGE INDUCTION MOTORS DURING REFURBISHMENT
MIL-DTL-55446 Revision D:2011 CABLES, TELEPHONE, SWITCHBOARD: PLASTIC INSULATED, PLASTIC JACKETED
MIL-DTL-81581-8 Revision A:2006 HOSE ASSEMBLIES, CABLE ASSEMBLIES, COMMUNICATION, ASSOCIATED
NASM 1312-8 : 2001 FASTENER TEST METHODS, METHOD 8, TENSILE STRENGTH
API 11B : 2010 SPECIFICATION FOR SUCKER RODS, POLISHED RODS AND LINERS, COUPLINGS, SINKER BARS, POLISHED ROD CLAMPS, STUFFING BOXES, AND PUMPING TEES
ASTM E 2623 : 2014 : REDLINE Standard Practice for Reporting Thermometer Calibrations
AWS C3.5 : 1999 SPECIFICATION FOR INDUCTION BRAZING
DSCC 93002 : B CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 372 CONTACT POSITIONS
NASM1312-13 : 2003 FASTENER TEST METHODS - METHOD 13 - DOUBLE SHEAR TEST
IEEE C37.241-2017 IEEE Guide for Application of Optical Instrument Transformers for Protective Relaying
SAE ARP 5543 : 2015 AIRCRAFT WHEEL INFLATION VALVES INCORPORATING AN INFLATION PRESSURE GAUGE
NASA-STD-8739.12:2018 METROLOGY & CALIBRATION
ASTM F 1476 : 2007 : R2013 Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications
ASTM F 2332 : 2006 Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components
ASTM E 1444 : 2005 Standard Practice for Magnetic Particle Testing
API 14L CHINESE : 2007 SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES
ASTM F 1476 : 2007 Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications
MIL-PRF-83504 Revision C:2005 SWITCHES, DUAL IN-LINE PACKAGE (DIP), GENERAL SPECIFICATION FOR
MIL-C-11272 Revision E:2008 CAPACITORS, FIXED, GLASS DIELECTRIC, GENERAL SPECIFICATION FOR
MIL C 55629 : B CIRCUIT BREAKERS, MAGNETIC, UNSEALED, TRIP-FREE, SINGLE POLE, FRONT MOUNTED, AUXILIARY CONTACTS (1 TO 100 AMPERES)
MIL C 39019 : C CIRCUIT BREAKERS, MAGNETIC, LOW-POWER, SEALED, TRIP-FREE, GENERAL SPECIFICATION FOR
MIL P 50884 : E PRINTED WIRING BOARD, FLEXIBLE OR RIGID-FLEX, GENERAL SPECIFICATION FOR
MIL-PRF-71226 Base Document:1996 ARMAMENTS AND MUNITIONS, STANDARD PROVISIONS, GENERAL SPECIFICATION FOR
IPC WHMA A 620 HUNGARIAN : B REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES
IPC J STD 004 RUSSIAN : B REQUIREMENTS FOR SOLDERING FLUXES
MIL-DTL-13253 Revision E:2007 HANDSETS, GENERAL SPECIFICATION FOR
MIL F 19207 : D (1) SUPP 1 FUSEHOLDER, EXTRACTOR POST TYPE, BLOWN FUSE INDICATING AND NONINDICATING GENERAL SPECIFICATION FOR
MIL PRF 83513 : D CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR
IPC WHMA A 620 TURKISH : B2012 AMD 1 2013 REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES
IPC WHMA A 620 HEBREW : B2012 AMD 1 2013 REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES
IPC WHMA A 620 SPANISH : B REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES
IPC WHMA A 620 CHINESE : B REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES
MIL S 83731 : A SWITCH, TOGGLE, UNSEALED AND SEALED TOGGLE, GENERAL SPECIFICATION FOR
IPC WHMA A 620 VIETNAMESE : B2012 REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES
IPC 4411 : A SPECIFICATION AND CHARACTERIZATION METHODS FOR NONWOVEN PARA-ARAMID REINFORCEMENT
IPC 4204 CHINESE : A2011 AMD 1 2013 FLEXIBLE METAL-CLAD DIELECTRICS FOR USE IN FABRICATION OF FLEXIBLE PRINTED CIRCUITRY
MIL-DTL-3965 Revision H:2004 CAPACITOR, FIXED ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM, GENERAL SPECIFICATION FOR
MIL-DTL-53126 Revision A:2012 POWER DISTRIBUTION, ILLUMINATION SYSTEMS, ELECTRICAL, GENERAL SPECIFICATION FOR
IPC J STD 004 CHINESE : B REQUIREMENTS FOR SOLDERING FLUXES
MIL S 3786 : F SWITCH, ROTARY, CLOSED CONSTRUCTION, 2 AMPERES, LOW LEVEL, POSITIVE SHAFT GROUNDING STYLE SR04
IPC WHMA A 620 POLISH : B REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES
IPC 4204 : A FLEXIBLE METAL-CLAD DIELECTRICS FOR USE IN FABRICATION OF FLEXIBLE PRINTED CIRCUITRY
IPC 4202 CHINESE : A FLEXIBLE BASE DIELECTRICS FOR USE IN FLEXIBLE PRINTED CIRCUITRY
IEEE/ANSI C63.4-2014 American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz
MIL-DTL-32496 Base Document:2014 GENERATOR SETS, SKID MOUNTED, TRAILER MOUNTED ADVANCED MEDIUM-SIZED MOBILE POWER SOURCES, TACTICAL DIESEL FUEL DRIVEN, ALTERNATING CURRENT 5 THROUGH 60 KILOWATTS, GENERAL SPECIFICATION FOR
IPC 4101 CHINESE : C2009 SPECIFICATION FOR BASE MATERIALS FOR RIGID AND MULTILAYER PRINTED BOARDS
MIL-DTL-5589 Revision E:1999 EARPHONE, (EXTENDED RANGE), H-301/U
IPC 4101 GERMAN : C SPECIFICATION FOR BASE MATERIALS FOR RIGID AND MULTILAYER PRINTED BOARDS
IPC WHMA A 620 ESTONIAN : B2012 AMD 1 2013 REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES
IPC WHMA A 620 KOREAN : B2012 AMD 1 2013 REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES
08/30166039 DC : DRAFT JUNE 2008 BS ISO 17824 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SAND-CONTROL SCREENS
MIL-F-18327 Revision F:2008 FILTERS; HIGH PASS, LOW PASS, BAND PASS, BAND SUPPRESSION, AND DUAL FUNCTIONING, GENERAL SPECIFICATION FOR
AWS D10.10/D10.10M : 1999 : R2009 RECOMMENDED PRACTICES FOR LOCAL HEATING OF WELDS IN PIPING AND TUBING
DSCC 02007 : A CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 396 CONTACT POSITIONS
SAE ARP 5796 : 2013 FLIGHT CRITICAL CONTROL VALVES, MILITARY AIRCRAFT
11/30238890 DC : 0 BS EN ISO 14998 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWN HOLE EQUIPMENT - COMPLETION ACCESSORIES
MIL-DTL-26518 Revision C:2000 CONNECTORS, ELECTRICAL, MINIATURE, RACK AND PANEL, ENVIRONMENT RESISTANT, 200 DEGREES C AMBIENT TEMPERATURE - GENERAL SPECIFICATION FOR
MIL R 27208 : D RESISTOR, VARIABLE, WIRE-WOUND, NONPRECISION, GENERAL SPECIFICATION FOR
MIL F 28861 : B FILTER AND CAPACITOR, RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE SUPPRESSION, GENERAL SPECIFICATION FOR
CSA C392 : 2011 : INC : UPD 1 : 2011 TESTING OF THREE-PHASE SQUIRREL CAGE INDUCTION MOTORS DURING REFURBISHMENT
ZZ-H-617 Revision C:2002 HOSE, RUBBER, WINDSHIELD WIPER
MIL PRF 62186 : A GENERATOR, ALTERNATING CURRENT (650 AMPERE RECTIFIED), 28 VOLTS DIRECT CURRENT (OIL COOLED)
MIL-PRF-62565 Revision B:1997 AIR CLEANER, ENGINE
DSCC 04027 : A CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROWS, 452 CONTACT POSITIONS
MIL L 7808 : K (1) LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE
DD IEC/PAS 61249-6-3:2011 Specification for finished fabric woven from “E?? glass for printed boards
MIL-H-87111 Revision A:1984 HEAT SINKS, SEMICONDUCTOR DEVICES, GENERAL SPECIFICATION FOR
SAE AS 1356 : 2012 LIFE RAFTS
ASTM E 1417/E1417M : 2016 : REDLINE Standard Practice for Liquid Penetrant Testing
MIL-DTL-55330 Revision C:2001 CONNECTORS, ELECTRICAL AND FIBER OPTIC, PACKAGING OF
MIL R 94 : E RESISTORS, VARIABLE, COMPOSITION, GENERAL SPECIFICATION FOR
SAE AS 5768 : 2013 TOOL, STRIPPER, ELECTRICAL INSULATION, GENERAL SPECIFICATION FOR
SAE AS 7928 : 2011 TERMINALS, LUG: SPLICES, CONDUCTOR: CRIMP STYLE, COPPER, GENERAL SPECIFICATION FOR
SAE AS 81659 : 2017 CONNECTORS, ELECTRICAL, RECTANGULAR CRIMP CONTACTS, GENERAL SPECIFICATION FOR
SAE AS 21608 : 2012 FERRULE, SHIELD TERMINATING, CRIMP STYLE
SAE AS 85028 : 2017 CONNECTOR, ELECTRICAL, RECTANGULAR, INDIVIDUAL CONTACT SEALING, POLARIZED CENTER JACKSCREW, GENERAL SPECIFICATION FOR
API 19G1 : 2010 SIDE-POCKET MANDRELS
ASTM F 1548 : 2001 Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications
ASTM F 1548 : 2001 : R2012 Standard Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications
ASTM D 6216 : 2012 : REDLINE Standard Practice for Opacity Monitor Manufacturers to Certify Conformance with Design and Performance Specifications
IEC PAS 61249-6-3:2011 Specification for finished fabric woven from "E" glass for printed boards
IEC PAS 62213:2001 Specification and characterization methods for nonwoven para-aramid reinforcement
MIL-DTL-5015 Revision H:2000 CONNECTORS, ELECTRICAL, CIRCULAR THREADED, AN TYPE - GENERAL SPECIFICATION FOR
MIL-G-18997 Revision E:1991 GAUGE, PRESSURE, DIAL INDICATING
I.S. EN ISO 10432:2005 PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT
IPC WHMA A 620 DANISH : B REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES
I.S. EN ISO 16070:2006 PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - LOCK MANDRELS AND LANDING NIPPLES
AWS D10.10/D10.10M : 1999 RECOMMENDED PRACTICES FOR LOCAL HEATING OF WELDS IN PIPING AND TUBING
NAVSEA T9074 BD GIB 010/0300 : 0 BASE MATERIALS FOR CRITICAL APPLICATIONS: REQUIREMENTS FOR LOW ALLOY STEEL PLATE, FORGINGS, CASTINGS, SHAPES, BARS, AND HEADS OF HY-80/100/130 AND HSLA-80/100
SAE AS 5649 : 2012 WIRE AND CABLE MARKING PROCESS, UV LASER
API 19G1 CHINESE : 2010 SIDE-POCKET MANDRELS
MIL-STD-1537 Revision C:2002 Electrical Conductivity Test for Verification of Heat Treatment of Aluminum Alloys, Eddy Current Method
SAE AS 7108 : 2009 NADCAP AUDIT CRITERIA FOR CHEMICAL PROCESSING
MIL-DTL-32234 Base Document:2007 CONNECTORS, ELECTRICAL, ULTRA HIGH DENSITY, MODULAR, BLADE AND FORK, EIGHT ROW, GENERAL SPECIFICATION FOR
AECTP-100 : 2016 ENVIRONMENTAL GUIDELINES FOR DEFENCE MATERIEL
MIL-DTL-8777 Revision F:2011 WIRE, ELECTRICAL, SILICONE-INSULATED, COPPER, 600-VOLT, 200 DEGREES C
MIL S 22710 : E SWITCHES, ROTARY (PRINTED CIRCUIT), (THUMBWHEEL, INLINE, AND PUSHBUTTON), GENERAL SPECIFICATION FOR
MIL-DTL-12520 Revision D:2005 Connectors, Plug and Receptacle (Electrical, Waterproof), and Accessories; General Specification for
MIL F 15160 : G FUSE, INSTRUMENT, POWER, AND TELEPHONE, GENERAL SPECIFICATION FOR
MIL-S-13949 Revision H:1993 SHEET, PRINTED WIRING BOARD, GENERAL SPECIFICATION FOR
MIL-DTL-55353 Revision A:1999 HEADSET, ELECTRICAL, H-216 A/U
MIL-H-10056 Revision F:1995 HOLDERS (ENCLOSURES), CRYSTAL, GENERAL SPECIFICATION FOR
SAE MA 5405 : 2018 SPLICES, FIBER OPTICS, FOR AEROSPACE INTER-CONNECTION SYSTEMS
CSA C392 : 2011 : R2016 TESTING OF THREE-PHASE SQUIRREL CAGE INDUCTION MOTORS DURING REFURBISHMENT
SAE AS 29606 : 2014 WIRE, ELECTRICAL, STRANDED, UNINSULATED COPPER, COPPER ALLOY, OR ALUMINUM, OR THERMOCOUPLE EXTENSION, GENERAL SPECIFICATION FOR
SAE ARP 5448/5 : 2016 PLAIN BEARING NO-LOAD ROTATIONAL BREAKAWAY TORQUE MEASUREMENT
NASA PRC 6002 : 2007 PROCESS SPECIFICATION FOR THE ASSEMBLY OF COMPOSITE SANDWICH STRUCTURES
SAE AS 58091 : 2012 CIRCUIT BREAKERS, TRIP-FREE, AIRCRAFT, GENERAL SPECIFICATION FOR
ISO 10432:2004 Petroleum and natural gas industries Downhole equipment Subsurface safety valve equipment
SAE ARP 5448/1 : 2016 PLAIN BEARING RADIAL LIMIT AND ULTIMATE LOAD TESTS
SAE ARP 5542 : 2012 HAND HELD AIRCRAFT TIRE INFLATION PRESSURE GAUGES
SAE ARP 5416 : 2013 AIRCRAFT LIGHTNING TEST METHODS
EIA IS 648 : 1996 MEASUREMENT OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF EQUIPMENT INTENDED TO OPERATE IN SEVERE ELECTROMAGNETIC ENVIRONMENTS
NASA PRC 6003 : 2007 PROCESS SPECIFICATION FOR THE TRIMMING AND DRILLING OF COMPOSITES
SAE AS 7109 : 2009 NADCAP REQUIREMENTS FOR COATINGS
MIL-STD-810 Revision G:2008 ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
SAE AS 18280 : 2017 FITTINGS, 24 DEGREES CONE FLARELESS, FLUID CONNECTION, 3000 PSI
ASTM F 1548 : 2001 : R2006 Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications
ISO/TR 10305-2:2003 Road vehicles Calibration of electromagnetic field strength measuring devices Part 2: IEEE standard for calibration of electromagnetic field sensors and probes, excluding antennas, from 9 kHz to 40 GHz
BS EN ISO 17078-2:2007 Petroleum and natural gas industries. Drilling and production equipment Flow-control devices for side-pocket mandrels
NASA PRC 4002 : 2010 PROCESS SPECIFICATION FOR THE APPLICATION OF THERMAL AND CORROSION CONTROL PAINTS AND COATINGS
NASA STD 8739.3 : 1998 SOLDERED ELECTRICAL CONNECTIONS
GEIA STD 0006 : 2008 REQUIREMENTS FOR USING ROBOTIC HOT SOLDER DIP TO REPLACE THE FINISH ON ELECTRONIC PIECE PARTS
NASA HDBK 8739.19-2 : 2010 MEASURING AND TEST EQUIPMENT SPECIFICATIONS - NASA MEASUREMENT QUALITY ASSURANCE HANDBOOK - ANNEX 2
NASA HDBK 8739.19-4 : 2010 ESTIMATION AND EVALUATION OF MEASUREMENT DECISION RISK - NASA MEASUREMENT QUALITY ASSURANCE HANDBOOK - ANNEX 4
NASA STD 8739.2 : 1999 WORKMANSHIP STANDARD FOR SURFACE MOUNT TECHNOLOGY
UNI EN ISO 17078-2 : 2009 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 2: FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS
UNI EN ISO 17078-1 : 2010 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS
IPC 4562 : A METAL FOIL FOR PRINTED BOARD APPLICATIONS
EN ISO 10432:2004 Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:2004)
SAE AS 5830 : 2017 COUPLING ASSEMBLY, THREADLESS, FLEXIBLE, FIXED CAVITY, CURRENT CARRYING, SELF-BONDING, PROCUREMENT SPECIFICATION
MIL-DTL-24403-1 Revision F:2008 ELECTRODES - WELDING, FLUX CORED, ORDINARY STRENGTH AND LOW ALLOY STEEL
MIL-DTL-71172 Revision B:2005 CYLINDER, RECUPERATOR, RECOIL, M119A1/A2 HOWITZER LIGHT, TOWED: 105 MM
BS EN ISO 15551-1:2015 Petroleum and natural gas industries. Drilling and production equipment Electric submersible pump systems for artificial lift
MIL R 23648 : E RESISTOR, THERMAL (THERMISTOR) INSULATED, GENERAL SPECIFICATION FOR
MIL-HDBK-2164 Revision A:1996 ENVIRONMENTAL STRESS SCREENING PROCESS FOR ELECTRONIC EQUIPMENT
API SPEC 11B CHINESE : 2010 SPECIFICATION FOR SUCKER RODS, POLISHED RODS AND LINERS, COUPLINGS, SINKER BARS, POLISHED ROD CLAMPS, STUFFING BOXES, AND PUMPING TEES
MIL-PRF-87217 Revision A:1999 CAPACITORS, FIXED, SUPERMETALLIZED PLASTIC FILM DIELECTRIC, DIRECT CURRENT FOR LOW ENERGY, HIGH IMPEDANCE APPLICATIONS, HERMETICALLY SEALED IN METAL CASES, HIGH RELIABILITY, GENERAL SPECIFICATION FOR
MIL-DTL-22200-1 Revision H:2008 ELECTRODES, WELDING, MINERAL COVERED, IRON-POWDER, LOW-HYDROGEN MEDIUM AND HIGH TENSILE STEEL, AS-WELDED OR STRESS-RELIEVED WELD APPLICATION
MIL R 39007 : G (3) SUPP 1A RESISTORS, FIXED, WIRE-WOUND (POWER TYPE), NONESTABLISHED RELIABILITY, ESTABLISHED RELIABILITY, AND SPACE LEVEL, GENERAL SPECIFICATION FOR
MIL PRF 62422 : B FILTER, LASER HAZARD PROTECTION
MIL R 22097 : G RESISTORS, VARIABLE, NONWIRE-WOUND (ADJUSTMENT TYPE), GENERAL SPECIFICATION FOR
DSCC 03023 : A CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 396 CONTACT POSITIONS
MIL L 12632 : D LOUDSPEAKER, PERMANENT MAGNET (ENCASED, 2 WATT, FUNGUS, GUNBLAST, AND IMMERSION RESISTANT), GENERAL SPECIFICATION FOR
MIL R 22684 : D RESISTOR, FIXED, FILM, INSULATED, GENERAL SPECIFICATION FOR
MIL-DTL-3849 Revision C:2005 CORD, ELECTRICAL (TINSEL)
MIL C 15305 : E COIL, FIXED AND VARIABLE, RADIO FREQUENCY GENERAL SPECIFICATION FOR
MIL S 83505 : B SOCKET, (LEAD ELECTRONIC COMPONENTS) GENERAL SPECIFICATION FOR
13/30217541 DC : 0 BS EN ISO 15551-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: ELECTRIC SUBMERSIBLE PUMP SYSTEMS FOR ARTIFICIAL LIFT
MIL F 23419 : E FUSE, CARTRIDGE, INSTRUMENT TYPE, GENERAL SPECIFICATION FOR
09/30154810 DC : 0 BS EN ISO 28781 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE VALVES AND RELATED EQUIPMENT
AWS C3.11M/C3.11:2011 SPECIFICATION FOR TORCH SOLDERING
ASTM D 2632 : 2015 : REDLINE Standard Test Method for Rubber Property—Resilience by Vertical Rebound
MIL PRF 12883 : E SOCKETS AND ACCESSORIES FOR PLUG-IN ELECTRONIC COMPONENTS, GENERAL SPECIFICATION FOR
QQ-W-343 Revision G:1997 WIRE, ELECTRICAL, COPPER (UNINSULATED)
MIL-DTL-49104 Revision C:2011 CABLE, TELEPHONE WD-1A/TT (FIELD WIRE, PARALLEL PAIR)
MIL-PRF-62122 Revision E:2011 CABLE ASSEMBLY, INTER-VEHICLE POWER: PLUG, RECEPTACLE, AND ADAPTER
API 7NRV CHINESE : 2006 SPECIFICATION FOR DRILL STRING NON-RETURN VALVES
API SPEC 14L : 2007 SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES
SAE AS 81969 : 2016 INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, GENERAL SPECIFICATION FOR
API 14A RUSSIAN : 2001 SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT
CSA C837 : 2016 MONITORING AND ENERGY PERFORMANCE MEASUREMENTS OF COMPRESSED AIR SYSTEMS
SAE AS 42701 : 2014 VALIDATION METHODS FOR MIL-STD-1760D MISSION STORES
SAE AS 6019 : 2012 ARC FAULT CIRCUIT BREAKER (AFCB), AIRCRAFT, TRIP-FREE 28 VDC
AWS C3.9M/C3.9 : 2009 SPECIFICATION FOR RESISTANCE BRAZING
IEEE 475-2000 IEEE Standard Measurement Procedure for Field Disturbance Sensors 300 MHz to 40 GHz
I.S. EN ISO 15551-1:2015 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: ELECTRIC SUBMERSIBLE PUMP SYSTEMS FOR ARTIFICIAL LIFT (ISO 15551-1:2015)
SAE AS 81714 : 2014 TERMINAL JUNCTION SYSTEM (TJS), ENVIRONMENT RESISTANT, GENERAL SPECIFICATION FOR
CSA C391 : 2015 TESTING OF THREE-PHASE SYNCHRONOUS MACHINES DURING REFURBISHMENT
ASTM F 2332 : 2006 : R2013 Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components
BS EN ISO 10432:2004 Petroleum and natural gas industries. Downhole equipment. Subsurface safety valve equipment
ISO 15551-1:2015 Petroleum and natural gas industries — Drilling and production equipment — Part 1: Electric submersible pump systems for artificial lift
ISO 16070:2005 Petroleum and natural gas industries Downhole equipment Lock mandrels and landing nipples
ISO 17078-2:2007 Petroleum and natural gas industries — Drilling and production equipment — Part 2: Flow-control devices for side-pocket mandrels
BS EN ISO 10417:2004 Petroleum and natural gas industries. Subsurface safety valve systems. Design, installation, operation and redress
BS EN ISO 16070:2005 Petroleum and natural gas industries. Downhole equipment. Lock mandrels and landing nipples
ISO 10417:2004 Petroleum and natural gas industries Subsurface safety valve systems Design, installation, operation and redress
BS EN ISO 17078-1 : 2004 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS
ISO 17078-1:2004 Petroleum and natural gas industries — Drilling and production equipment — Part 1: Side-pocket mandrels
IPC J STD 004 : B REQUIREMENTS FOR SOLDERING FLUXES
EN ISO 16070:2005 Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples (ISO 16070:2005)
EN ISO 10417:2004 Petroleum and natural gas industries - Subsurface safety valve systems - Design, installation, operation and redress (ISO 10417:2004)
EN ISO 15551-1:2015 Petroleum and natural gas industries - Drilling and production equipment - Part 1: Electric submersible pump systems for artificial lift (ISO 15551-1:2015)
SAE ARP 5448/9 : 2007 PLAIN BEARING LINED INSIDE DIAMETER PLUG GAGING
SAE AS 5372 : 2015 FUSE, CURRENT LIMITER TYPE, AIRCRAFT
08/30146353 DC : DRAFT MAR 2008 BS EN ISO 17078-4 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 4: PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT
API 14L : 2007 : R2012 SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES
03/311760 DC : DRAFT JULY 2003 ISO 10432 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT
SAE AS 81582 : 2017 CONNECTORS, ELECTRICAL, BAYONET COUPLING, ENVIRONMENT RESISTING, UMBILICAL, GENERAL SPECIFICATION FOR
SAE AS 29600 : 2017 CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIGH DENSITY, QUICK COUPLING, ENVIRONMENT RESISTANT, REMOVABLE CRIMP CONTACTS ASSOCIATED HARDWARE, GENERAL SPECIFICATION FOR
SAE AS 5258 : 2012 INSULATING COMPONENT, MOLDED, ELECTRICAL, HEAT SHRINKABLE, CONNECTOR AND CABLE ACCESSORY, SEALING STRAIN RELIEF, GENERAL SPECIFICATION FOR
MIL-DTL-24416 Revision C:2006 EXTINGUISHING SYSTEM, FIRE, FIXED, WET CHEMICAL
API 14B RUSSIAN : 2005 DESIGN, INSTALLATION, REPAIR AND OPERATION OF SUBSURFACE SAFETY VALVE SYSTEMS
SAE AS 5259 : 2013 CRIMPING TOOL AND ACCESSORIES, ELECTRICAL, SIZE 8 TO 700 KCMIL, GENERAL PURPOSE USE, DIE AND DIELESS
API 7NRV : 2006 SPECIFICATION FOR DRILL STRING NON-RETURN VALVES
API 7NRV : 2006 : R2012 SPECIFICATION FOR DRILL STRING NON-RETURN VALVES
SAE AS 40401 : 2013 SOLENOID, ELECTRICAL, GENERAL SPECIFICATION FOR
IEEE/ANSI C63.23-2012 American National Standard Guide for Electromagnetic Compatibility—Computations and Treatment of Measurement Uncertainty
IEEE 1502-2007 IEEE Recommended Practice for Radar Cross-Section Test Procedures
IPC 4562 CHINESE : A METAL FOIL FOR PRINTED BOARD APPLICATIONS
ASTM D 7392 : 2007 : R2013 Standard Practice for PM Detector and Bag Leak Detector Manufacturers to Certify Conformance with Design and Performance Specifications for Cement Plants
EN ISO 17078-2:2007/AC:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 2: FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS
EN ISO 17078-1:2004/A1:2010 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS
13/30295424 DC : 0 BS IEC/PAS 61249-8-1 ED.1 - QUALIFICATION AND PERFORMANCE OF ELECTRICAL INSULATING COMPOUND FOR PRINTED WIRING ASSEMBLIES
DSCC 99002 : A TRANSFORMER, SWITCHING
I.S. EN ISO 17078-1:2005 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS
ASME B89.4.19 : 2006 PERFORMANCE EVALUATION OF LASER-BASED SPHERICAL COORDINATE MEASUREMENT SYSTEMS

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more