Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

AS 1834.1-1991

Current
Current

The latest, up-to-date edition.

Material for soldering Solder alloys (Reconfirmed 2018)
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

13-05-1991

1 - AS 1834.1-1991 MATERIAL FOR SOLDERING - SOLDER ALLOYS
4 - PREFACE
4 - CONTENTS
5 - 1 SCOPE
5 - 2 REFERENCED DOCUMENTS
5 - 3 DESIGNATION
5 - 4 CHEMICAL COMPOSITION
5 - 4.1 General
5 - 4.2 Methods of sampling and analysis
6 - 5 HEALTH AND SAFETY
6 - 6 MARKING
8 - APPENDIX A - PURCHASING GUIDELINES
8 - A1 GENERAL
8 - A2 INFORMATION TO BE SUPPLIED BY THE PURCHASER
9 - APPENDIX B - PROPERTIES AND TYPICAL APPLICATIONS OF SOLDER ALLOYS
9 - B1 SCOPE

Specifies requirements for chemical composition and gives properties and typical applications for tin-lead and other tin-containing solder alloys.

This Standard specifies the chemical composition requirements for tin-lead and other tin-containing solder alloys supplied in the cast, wrought, paste, or powder form. It is not applicable to working solder baths which may be subject to other impurity requirements.NOTES:1 For the purpose of this Standard, 'wrought' includes ribbon, wire, rod and preforms.2 Advice and recommendations on information to be supplied by the purchaser at the time of enquiry and order are contained in Appendix A.3 Typical properties and uses of solders specified in this Standard are given in Appendix B.4 The contaminant limits for working solder baths used for the soldering of printed board assemblies are given in AS 3508.1.

Committee
MT/5
DocumentType
Standard
ISBN
0 7262 6834 8
Pages
6
ProductNote
Reconfirmed 14/09/2018.
This standard has been reconfirmed in Australia in 2018 and remains current in New Zealand. Reconfirmation Notice 14/09/2018
PublisherName
Standards Australia
Status
Current
Supersedes

First published as AS H1-1931.
Revised and redesignated as part of AS 1834-1979.
Revised and redesignated in part as AS 1834.1-1986.
Second edition 1991.
Reconfirmed 2018.
First published as AS H1-1931. AS H1-1931 revised and redesignated as part of AS 1834-1979. AS 1834-1979 revised and redesignated in part as AS 1834.1-1986. Second edition 1991.

AS 2292.2-1987 Methods for the analysis of solders Determination of silver, bismuth, cadmium, copper antimony, iron and zinc - Flare, atomic absorption spectrometric method (Reconfirmed 2016)
AS 3508.1-1989 Printed board assemblies - Preparation, handling and assembly
AS 2292.1-1979 Methods for the analysis of solders Determination of tin (Volumetric Method)
AS 2534-1997 Lead and lead alloys - Sampling for chemical and spectrochemical analysis
AS 1671.3-1987 Lead alloys Determination of high concentrations of antimony in lead alloys containing not more than 2.5 percent arsenic and 1.0 percent copper - Titrimetric method (Reconfirmed 2016)
AS 1671.1-1987 Lead alloys Determination of antimony content - Flame atomic absorption spectrometric method (Reconfirmed 2016)
AS 1671.2-1987 Lead alloys Determination of low concentrations of antimony in lead alloys containing not more than 2.5 percent arsenic and 0.10 percent copper - titrimetric method (Reconfirmed 2016)
AS 1671.4-1988 Lead and lead alloys Determination of tin in antimonial lead - Flame atomic absorption spectrometric method (Reconfirmed 2016)
AS/NZS 1747:2022 Reeling, trailing and feeder cables used for mining - Repair, testing and fitting of accessories

AS 4647-2011 Diaphragm gas meters
AS/NZS 3100:1997 Approval and test specification - General requirements for electrical equipment
AS 2845.1-1995 Water supply - Backflow prevention devices - Materials, design and performance requirements
AS 3517-2007 Capillary fittings of copper and copper alloy for non-pressure sanitary plumbing applications (Reconfirmed 2018)
AS 4363(INT)-1996 Soldering electrical and electronic assemblies
AS 1357.1-2004 Valves primarily for use in heated water systems - Protection valves
AS/NZS 2845.1:2010 Water supply - Backflow prevention devices Materials, design and performance requirements
AS 5200.037.2-2008 Plumbing and drainage products Flow controllers for use with heated or cold water systems (Reconfirmed 2016)
AS 4647-2005 Domestic diaphragm gas meters
AS/NZS 3100:2017 Approval and test specification - General requirements for electrical equipment
AS 3688-1994 Water supply - Copper and copper alloy body compression and capillary fittings and threaded-end connectors
AS 3517-1995 Capillary fittings of copper and copper alloy for non-pressure sanitary plumbing applications
AS 4032.1-2005 Water supply - Valves for the control of heated water supply temperatures Thermostatic mixing valves - Materials design and performance requirements
AS 3688:2016 Water supply and gas systems - Metallic fittings and end connectors
AS 1718-1992 Water supply - Copper alloy screw-down pattern taps - Specified by dimensions
AS 4032.2-2005 Water supply - Valves for the control of hot water supply temperatures Tempering valves and end-of-line temperature-actuated devices (Reconfirmed 2015)
AS 3718-1992 Water supply - Metal-bodied taps - Specified by performance
AS 1357.2-2005 Valves primarily for use in heated water systems Control valves (Reconfirmed 2015)
AS 1628-1999 Water supply - Metallic gate, globe and non-return valves
AS/NZS 3500.3:2003 Plumbing and drainage Stormwater drainage
ATS 5200.014-2004 Technical Specification for plumbing and drainage products - Jointing materials
AS 2118.9-1995 Automatic fire sprinkler systems Piping support and installation (Reconfirmed 2013)
MP 52-1997 Manual of authorization procedures for plumbing and drainage products
AS 1628-1994 Water supply - Copper alloy gate, globe and non-return valves
AS 1910-1994 Water supply - Float control valves for use in hot and cold water
AS 1747-1993 Reeling, trailing and feeder cables used for mining - Repair and testing
AS/NZS 3718:2005 Water supply - Tap ware (Reconfirmed 2016)
AS/NZS 3500.3:2018 Plumbing and drainage Stormwater drainage
AS/NZS 3100:2002 Approval and test specification - General requirements for electrical equipment
AS/NZS 3718:2003 Water supply - Tap ware
AS 1910-2004 Water supply - Float control valves for use in hot and cold water (Reconfirmed 2016)
AS 4032.4:2014 Water supply - Valves for the control of heated water supply temperatures Thermostatically controlled taps for the control of heated water supply temperatures
AS 3100-1994 Approval and test specification - General requirements for electrical equipment
AS/NZS 2845.1:1998 Water supply - Backflow prevention devices Materials, design and performance requirements
AS/NZS 3100:2009 Approval and test specification - General requirements for electrical equipment
AS 1834.2-1986 Material for soldering Flux-cored solders (Reconfirmed 2018)
MP 52-2001 Manual of authorization procedures for plumbing and drainage products
AS 1357.1-2009 Valves primarily for use in heated water systems Protection valves
AS 5200.007-2008 Plumbing and drainage products Metal-bodied water hammer arresters
AS 2118.1-2006 Automatic fire sprinkler systems General systems
AS/NZS 1747:2003 Reeling, trailing and feeder cables used for mining - Repair, testing and fitting of accessories (Reconfirmed 2020)
AS 4118.2.1-1995 Fire sprinkler systems Piping - General (Reconfirmed 2013)
AS/NZS 3718:1997 Water supply - Metal-bodied taps - Specified by performance
AS 3688-2005 Water supply - Metallic fittings and end connectors
AS/NZS 3500.3:2015 Plumbing and drainage Stormwater drainage
AS 4032-1992 Thermostatic mixing valves - Materials, design and performance requirements
AS/NZS 3500.3.2:1998 National plumbing and drainage Stormwater drainage - Acceptable solutions

View more information
$43.36
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more