Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

AS 2738-2000

AvailableSuperseded

AvailableSuperseded

An Available Superseded Standard is one, which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation/regulations or in other Standards and its use should be restricted to where so referenced. No responsibility is taken by Intertek Inform as to the ongoing technical validity of such a Standard, the responsibility resting with the referencing authority.

Copper and copper alloys - Compositions and designations of refinery products, wrought products, ingots and castings (Reconfirmed 2018)

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

23-02-2000

Preview

1 - AS 2738-2000 COPPER AND COPPER ALLOYS-COMPOSITIONS AND DESIGNATIONS OF REFINERY PRODUCTS, WROUGHT PRODUCTS, INGOTS AND CASTINGS
4 - PREFACE
5 - CONTENTS
6 - SECTION 1 SCOPE AND GENERAL
6 - 1.1 SCOPE
6 - 1.2 REFERENCED DOCUMENTS
6 - 1.3 DESIGNATION SYSTEMS
6 - 1.3.1 General
7 - 1.3.2 Wrought alloys
7 - 1.3.3 Cast alloys
7 - 1.4 CHEMICAL COMPOSITION
7 - 1.4.1 Specific limits
7 - 1.4.2 Unnamed elements
9 - SECTION 2 REFINERY PRODUCTS
9 - 2.1 SCOPE
9 - 2.2 CHEMICAL COMPOSITION
10 - SECTION 3 WROUGHT PRODUCTS
10 - 3.1 SCOPE
10 - 3.2 CHEMICAL COMPOSITION
18 - SECTION 4 INGOTS AND CASTINGS
18 - 4.1 SCOPE
18 - 4.2 CHEMICAL COMPOSITION
23 - APPENDIX A - RELATED DESIGNATIONS

Provides listings of designations and chemical composition limits of copper and copper alloys in general use in Australia. Includes refinery products, wrought products, ingot and cast products. An appendix matches the designations with other common designations used internationally including those in ISO Standards.

1.1 SCOPE This Standard lists the designations and chemical composition limits for copper and copper alloy refinery, wrought, ingot and cast products in general use in Australia.NOTES:1 Related designations to compositions listed in this Standard are given in Appendix A.2 Copper and copper alloy products used for the conveyance of drinking (potable) water and waste water may be subject to specific requirements as specified in relevant product Standards or specifications.

Committee
MT/2
DocumentType
Standard
ISBN
0 7337 3237 2
Pages
21
ProductNote
Reconfirmed 14/09/2018.
This standard has been reconfirmed in Australia in 2018 and remains current in New Zealand. Reconfirmation Notice 14/09/2018
PublisherName
Standards Australia
Status
AvailableSuperseded
SupersededBy
Supersedes

First published in part as AS 2738.1-1984, AS 2738.2-1984 and AS 2738.3-1984.
AS 2738.1-1984, AS 2738.2-1984 and AS 2738.3-1984 revised, amalgamated and redesignated as AS 2738-2000.
Reconfirmed 2018.
Originated in part as AS 2738.1-1984, AS 2738.2-1984 and AS 2738.3-1984. AS 2738.1-1984, AS 2738.2-1984 and AS 2738.3-1984 revised, amalgamated and redesignated as AS 2738-2000.

AS/NZS 1571:1995 Copper - Seamless tubes for airconditioning and refrigeration
AS/NZS 1573:1995 Copper and copper alloys - Wire for engineering purposes (Reconfirmed 2020)
AS/NZS 1567:1997 Copper and copper alloys - Wrought rods, bars and sections (Reconfirmed 2021)
AS 1566-1997 Copper and copper alloys - Rolled flat products (Reconfirmed 2018)
AS/NZS 1279:1996 Copper refinery shapes
AS/NZS 1574:1996 Copper and copper alloys - Wire for electrical purposes (Reconfirmed 2020)
AS/NZS 1568:1998 Copper and copper alloys - Forging stock and forgings
AS 1565-1996 Copper and copper alloys - Ingots and castings (Reconfirmed 2020)
AS 1569-1998 Copper and copper alloys - Seamless tubes for heat exchangers (Reconfirmed 2020)

ATS 5200.016-2010 Technical Specification for plumbing and drainage products Cistern inlet valves
AS/NZS 1596:2002 The storage and handling of LP Gas
AS 3517-2007 Capillary fittings of copper and copper alloy for non-pressure sanitary plumbing applications (Reconfirmed 2018)
ATS 5200.004-2005 Technical Specification for plumbing and drainage products Urinal flushing cisterns
AS/NZS 5601.2:2010
AS 1357.1-2004 Valves primarily for use in heated water systems Protection valves
ATS 5200.042-2004 Technical Specification for plumbing and drainage products - Roll-grooved jointing systems
AS/NZS 1546.1:2008 On-site domestic wastewater treatment units Septic tanks
AS 5601-2004 Gas installations
AS/NZS 2845.1:2010 Water supply - Backflow prevention devices Materials, design and performance requirements
AS 5200.037.2-2008 Plumbing and drainage products Flow controllers for use with heated or cold water systems (Reconfirmed 2016)
AS/NZS 3499:2006 Water supply - Flexible hose assemblies (Reconfirmed 2016)
AS/NZS 1768:2007 Lightning protection
ATS 5200.020-2004 Technical Specification for plumbing and drainage products Flushing valves for water closets and urinals - for use with mains supply
AS 5830.1-2012 In-line ball valves for use in plumbing water supply systems Metal-bodied
AS 4032.1-2005 Water supply - Valves for the control of heated water supply temperatures Thermostatic mixing valves - Materials design and performance requirements
ATS 5200.468-2005 Technical Specification for plumbing and drainage products Hot water systems - Recirculation valves
AS 3688:2016 Water supply and gas systems - Metallic fittings and end connectors
AS 1172.2:2014 Sanitary plumbing products Flushing devices and cistern inlet and outlet valves
ATS 5200.017-2005 Technical Specification for plumbing and drainage products Cistern outlet valves
ATS 5200.464-2004 Technical Specification for plumbing and drainage products - Hot water manual or sensor-activated pumping systems
AS 4032.2-2005 Water supply - Valves for the control of hot water supply temperatures Tempering valves and end-of-line temperature-actuated devices (Reconfirmed 2015)
ATS 5200.425-2009 Technical Specification for plumbing and drainage products Water closet (WC) suite with integral odour control device (OCD) connected to sanitary plumbing and drainage system
AS 4747.2-2013 Meters for non-urban water supply Technical requirements for closed conduit meters fully charged
ATS 5200.476-2006 Technical Specification for plumbing and drainage products Heated water systems - Leak protection device
AS 1357.2-2005 Valves primarily for use in heated water systems Control valves (Reconfirmed 2015)
AS 4809-2003 Copper pipe and fittings - Installation and commissioning
AS/NZS 5601.2:2020 Gas installations LP Gas installations in caravans and boats for non-propulsive purposes
ATS 5200.420-2005 Technical Specification for plumbing and drainage products Trap-priming valves
ATS 5200.477-2006 Technical Specification for plumbing and drainage products Rainwater/mains supply changeover devices
ATS 5200.007-2004 Technical Specification for plumbing and drainage products - Water hammer arrestors
AS 4747.3-2013 Meters for non-urban water supply Technical requirements for open channel meters
AS 5081-2008 Hydraulically operated automatic control valves for waterworks purposes (Reconfirmed 2016)
AS 4956-2008 Air valves for water supply
ATS 5200.037.1-2006
AS 4795-2002 Double-flanged butterfly valves for waterworks purposes
AS 4883-2008 Air valves for sewerage
AS 4883:2017 Air valves for sewerage
AS/NZS 3718:2005 Water supply - Tap ware (Reconfirmed 2016)
ATS 5200.021-2004 Technical Specification for plumbing and drainage products Flushing valves for water closets and urinals - for use with break tank supply
ATS 5200.467-2004 Technical Specification for plumbing and drainage products Rainwater tank connection valve
ATS 5200.482-2006 Technical Specification for plumbing and drainage products Soil waste dump fitting
ATS 5200.466-2004 Technical Specification for plumbing and drainage products - Rainwater tank connection devices
ATS 5200.472-2006 Technical Specification for plumbing and drainage products Heated water system recirculation device
AS 4809:2017 Copper pipe and fittings - Installation and commissioning
AS/NZS 5601.1:2013 Gas installations General installations
AS 4775-2007 Emergency eyewash and shower equipment
AS 4795-2006 Butterfly valves for waterworks purposes
AS 1910-2004 Water supply - Float control valves for use in hot and cold water (Reconfirmed 2016)
AS 4032.4:2014 Water supply - Valves for the control of heated water supply temperatures Thermostatically controlled taps for the control of heated water supply temperatures
ATS 5200.012-2005 Technical Specification for plumbing and drainage products In-line valves for use in plumbing water supply systems - Miscellaneous types metallic and non-metallic
AS/NZS 1596:2008 The storage and handling of LP Gas
ATS 4747.2-2008 Meters for non-urban water supply Specification for closed conduit meters fully charged
ATS 5200.016-2005 Technical Specification for plumbing and drainage products - Cistern inlet valves
AS 1432-2004 Copper tubes for plumbing, gasfitting and drainage applications
AS/NZS 5601.2:2013 Gas installations LP Gas installations in caravans and boats for non-propulsive purposes
ATS 5200.475-2006 Technical Specification for plumbing and drainage products Heated Water Systems - Cold water recovery device
AS 4956:2017 Air valves for water supply
AS 1357.1-2009 Valves primarily for use in heated water systems Protection valves
ATS 5200.481-2006 Technical Specification for plumbing and drainage products Thermal switching valves
ATS 4747.3-2008 Meters for non-urban water supply - Specifications for open channel meters
AS/NZS 5601.1:2010 Gas installations General installations
AS 4425:2020 Above‑ground burial structures
AS 5200.007-2008 Plumbing and drainage products Metal-bodied water hammer arresters
AS 2345-2006 Dezincification resistance of copper alloys
ATS 5200.052-2005 Metallic-bodied inlet pressure control valves greater than DN 50
ATS 5200.479-2006 Flood stop safety valve
ATS 5200.030-2004 Technical Specification for plumbing and drainage products - Solenoid valves
AS 3688-2005 Water supply - Metallic fittings and end connectors
AS/NZS 1768(INT):2003 Lightning protection
ATS 5200.030-2007 Technical Specification for plumbing and drainage products Solenoid valves
ATS 5200.485-2006 Pressure compensating tank
AS/NZS 1596:2014 The storage and handling of LP Gas

View more information
$90.79
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more