AS 3727.1:2016
Current
The latest, up-to-date edition.
Pavements Residential
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
13-12-2016
This Standard specifies the design and construction of pavements for light usage, low speed, non-commercial applications for vehicles with a gross vehicle mass not exceeding 10t. This includes patios, paths, driveways, vehicle crossovers and recreational pavements such as cycleways.
This Standard specifies the design and construction of pavements for light usage, low speed, non-commercial applications for vehicles with a gross vehicle mass not exceeding 10 t. This includes patios, paths, driveways, vehicle crossovers and recreational pavements such as cycleways.This Standard excludes the following:(a) Concrete pavements using fibres as the sole means of reinforcement.(b) Roads and industrial pavements.(c) Class H1, H2, E and P sites (see Table 1.5).
Committee |
BD-098
|
DocumentType |
Standard
|
ISBN |
978-1-76035-610-1
|
Pages |
34
|
PublisherName |
Standards Australia
|
Status |
Current
|
Supersedes |
Originated as AS 3727—1993.Revised and redesignated as AS 3727.1:2016. Originated as AS3727-1993. Revised and redesignated as AS3727.1:2016.
AS 1289.4.4.1-1997 | Methods of testing soils for engineering purposes Soil chemical tests - Determination of the electrical resistivity of a soil - Method for sands and granular materials |
AS 1289.6.3.3-1997 | Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of the penetration resistance of a soil - Perth sand penetrometer test (Reconfirmed 2013) |
AS/NZS 4456.10:2003 | Masonry units, segmental pavers and flags - Methods of test Determining resistance to salt attack (Reconfirmed 2023) |
AS 1289.6.1.3-1998 | Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of the California Bearing Ratio of a soil - Standard field-in-place method |
AS/NZS 4456.0:2003 | Masonry units, segmental pavers and flags - Methods of test General introduction and list of methods (Reconfirmed 2023) |
AS 1428-1977 | Code of practice of design rules for access by the disabled |
AS/NZS 4456.9:2003 | Masonry units and segmental pavers and flags - Methods of test Determining abrasion resistance |
AS 1289.2.2.1-1998 | Methods of testing soils for engineering purposes Soil moisture content tests - Determination of the total suction of a soil - Standard method (Reconfirmed 2013) |
AS 1289.6.3.1-2004 | Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of the penetration resistance of a soil - Standard penetration test (SPT) (Reconfirmed 2016) |
AS 1289.3.5.1-2006 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the soil particle density of a soil - Standard method |
AS 1289.5.8.5-1998 | Methods of testing soils for engineering purposes Soil compaction and density tests - Nuclear surface moisture-density gauges - Density of a Type A or Type C standard density block (Reconfirmed 2013) |
AS 1289.6.5.1-1999 | Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of the static cone penetration resistance of a soil - Field test using a mechanical and electrical cone or friction-cone penetrometer (Reconfirmed 2013) |
AS 1289.3.5.2-2002 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the soil particle density of combined soil fractions - Vacuum pycnometer method (Reconfirmed 2013) |
AS/NZS 4456.14:2003 | Masonry units, segmental pavers and flags - Methods of test Determining water absorption properties (Reconfirmed 2023) |
AS 1289.2.1.4-2005 | Methods of testing soils for engineering purposes Soil moisture content tests - Determination of the moisture content of a soil - Microwave-oven drying method (subsidiary method) |
AS 1289.5.7.1-2006 | Methods of testing soils for engineering purposes Soil compaction and density tests - Compaction control test - Hilf density ratio and Hilf moisture variation (rapid method) |
AS/NZS 3661.2:1994 | Slip resistance of pedestrian surfaces Guide to the reduction of slip hazards |
AS 1289.3.9.2-2006 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the cone liquid limit of soil - One-point method |
AS 1289.2.1.2-2005 | Methods of testing soils for engineering purposes Soil moisture content tests - Determination of the moisture content of a soil - Sand bath method (subsidiary method) |
AS 1289.4.1.1-1997 | Methods of testing soils for engineering purposes Soil chemical tests - Determination of the organic matter content of a soil - Normal method |
AS/NZS 4456.6:2003 | Masonry units, segmental pavers and flags - Methods of test Determining potential to effloresce (Reconfirmed 2023) |
AS 1289.2.1.1-2005 | Methods of testing soils for engineering purposes Soil moisture content tests - Determination of the moisture content of a soil - Oven drying method (standard method) |
AS 1289.3.3.1-2009 | Methods of testing soils for engineering purposes Soil classification tests - Calculation of the plasticity index of a soil (Reconfirmed 2022) |
AS 2870-2011 | Residential slabs and footings |
AS 1289.2.1.5-2005 | Methods of testing soils for engineering purposes Soil moisture content tests - Determination of the moisture content of a soil - Infrared lights method (subsidiary method) |
AS 1289.7.1.2-1998 | Methods of testing soils for engineering purposes Soil reactivity tests - Determination of the shrinkage index of a soil - Loaded shrinkage index |
AS 1289.7.1.1-2003 | Methods of testing soils for engineering purposes Soil reactivity tests - Determination of the shrinkage index of a soil - Shrink-swell index |
AS 1289.5.8.8-1998 | Methods of testing soils for engineering purposes Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using proportion of water (Reconfirmed 2013) |
AS 1289.0:2014 | Methods of testing soils for engineering purposes Definitions and general requirements |
AS 1289.5.4.2-2007 | Methods of testing soils for engineering purposes Soil compaction and density tests - Compaction control test - Assignment of maximum dry density and optimum moisture content values |
AS 1289.6.7.3:2016 | Methods of testing soils for engineering purposes Soil strength and consolidation tests-Determination of permeability of a soil-Constant head method using a flexible wall permeameter |
AS 1289.6.6.1-1998 | Methods of testing soils for engineering purposes - Soil strength and consolidation tests Determination of the one-dimensional consolidation properties of a soil - Standard method |
AS/NZS 4456.3:2003 | Masonry units, segmental pavers and flags - Methods of test Determining dimensions |
AS 1289.3.7.1-2002 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the sand equivalent of a soil using a power-operated shaker |
AS 1289.6.2.2-1998 | Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of shear strength of a soil - Direct shear test using a shear box |
AS/NZS 4456.18:2003 | Masonry units, segmental pavers and flags - Methods of test Determining tensile strength of masonry units and segmental pavers (Reconfirmed 2023) |
AS/NZS 4456.19:2003 | Masonry units, segmental pavers and flags - Methods of test Determination of bow |
AS/NZS 4456.8:2003 | Masonry units, segmental pavers and flags - Methods of test Determining moisture content, dry density and ambient density (Reconfirmed 2023) |
AS 1289.6.4.2:2016 | Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of compressive strength of a soil - Compressive strength of a saturated specimen tested in undrained triaxial compression with measurement of pore water pressure |
AS 1289.6.4.1:2016 | Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of compressive strength of a soil - Compressive strength of a specimen tested in undrained triaxial compression without measurement of pore water pressure |
AS 1289.3.8.3:2014 | Methods of testing soils for engineering purposes Soil classification tests - Dispersion - Determination of pinhole dispersion classification of a soil |
AS 1289.5.2.1-2003 | Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the dry density or moisture content relation of a soil using modified compactive effort |
AS/NZS 4456.15:2003 | Masonry units, segmental pavers and flags - Methods of test Determining lateral modulus of rupture (Reconfirmed 2023) |
AS 1289.4.2.1-1997 | Methods of testing soils for engineering purposes Soil chemical tests - Determination of the sulfate content of a natural soil and the sulfate content of the groundwater - Normal method |
AS 1289.3.6.1-2009 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the particle size distribution of a soil - Standard method of analysis by sieving (Reconfirmed 2022) |
AS 1289.5.8.9-1998 | Methods of testing soils for engineering purposes Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using comparison against primary blocks (Reconfirmed 2013) (Reconfirmed 2014) |
AS 1289.5.8.4-2009 | Methods of testing soils for engineering purposes Soil compaction and density tests - Nuclear surface moisture-density gauges - Calibration using standard blocks |
AS 1289.3.2.1-2009 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the plastic limit of a soil - Standard method (Reconfirmed 2022) |
AS/NZS 4456.17:2003 | Masonry units, segmental pavers and flags - Methods of test Determining initial rate of absorption (suction) (Reconfirmed 2023) |
AS 1289.5.1.1-2003 | Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the dry density/moisture content relation of a soil using standard compactive effort |
AS/NZS 4671:2001 | Steel reinforcing materials |
AS 1289.6.3.2-1997 | Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of the penetration resistance of a soil - 9 kg dynamic cone penetrometer test |
AS/NZS 4456.7:2003 | Masonry units, segmental pavers and flags - Methods of test Determining core percentage and material thickness (Reconfirmed 2023) |
AS 1289.3.3.2-2009 | Methods of testing soils for engineering purposes Soil classification tests - Calculation of the cone plasticity index of a soil (Reconfirmed 2022) |
AS 1289.3.1.2-2009 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the liquid limit of a soil - One point Casagrande method (subsidiary method) (Reconfirmed 2017) |
AS 3798-2007 | Guidelines on earthworks for commercial and residential developments |
AS/NZS 4455.2:2010 | Masonry units, pavers, flags and segmental retaining wall units Pavers and flags (Reconfirmed 2020) |
AS 2008-2013 | Bitumen for pavements |
AS 1289.6.9.1-2000 | Methods of testing soils for engineering purposes Soil strength and consolidation test - Determination of stiffness of soil - Clegg impact value (CIV) |
AS 1289.1.1-2001 | Methods of testing soils for engineering purposes Sampling and preparation of soils - Preparation of disturbed soil samples for testing |
AS 1289.6.1.2-1998 | Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of the California Bearing Ratio of a soil - Standard laboratory method for an undisturbed specimen |
AS 1289.5.5.1-1998 | Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the minimum and maximum dry density of a cohesionless material - Standard method (Reconfirmed 2016) |
AS 1289.3.9.1:2015 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the cone liquid limit of a soil |
AS 1289.1.2.1-1998 | Methods of testing soils for engineering purposes Sampling and preparation of soils - Disturbed samples - Standard method |
AS/NZS 4586:2004 | Slip resistance classification of new pedestrian surface materials |
AS/NZS 4456.11:2003 | Masonry units, segmental pavers and flags - Methods of test Determining coefficients of expansion (Reconfirmed 2023) |
AS 1289.1.4.2-1998 | Methods of testing soils for engineering purposes Sampling and preparation of soils - Selection of sampling or test sites - Stratified random number method |
AS/NZS 2425:2015 | Bar chairs in reinforced concrete - Product requirements and test methods |
AS 1289.2.1.6-2005 | Methods of testing soils for engineering purposes Soil moisture content tests - Determination of the moisture content of a soil - Hotplate drying method |
AS 1289.5.8.1-2007 | Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of field density and field moisture content of a soil using a nuclear surface moisture-Density gauge - Direct transmission mode |
AS 1289.5.3.5-1997 | Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the field dry density of a soil - Water replacement method (Reconfirmed 2013) |
AS 1289.4.3.1-1997 | Methods of testing soils for engineering purposes Soil chemical tests - Determination of the pH value of a soil - Electrometric method |
AS/NZS 4456.5:2003 | Masonry units, segmental pavers and flags - Methods of test Determining the breaking load of segmental pavers and flags |
AS 2150-2005 | Hot mix asphalt - A guide to good practice |
AS 1289.5.4.3-2006 | Methods of testing soils for engineering purposes Soil compaction and density tests - Compaction control test - Dry density ratio and moisture ratio using statistical selection of reference values |
AS 1289.5.6.1-1998 | Methods of testing soils for engineering purposes Soil compaction and density tests - Compaction control test - Density index method for a cohesionless material (Reconfirmed 2016) |
AS 3600-2009 | Concrete structures |
AS 1289.3.1.1-2009 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the liquid limit of a soil - Four point Casagrande method |
AS 1289.5.3.2-2004 | Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the field density of a soil - Sand replacement method using a sand pouring can, with or without a volume displacer (Reconfirmed 2016) |
AS 1289.6.2.1-2001 | Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of the shear strength of a soil - Field test using a vane (Reconfirmed 2013) |
AS 1289.2.3.1-1998 | Methods of testing soils for engineering purposes Soil moisture content tests - Establishment of correlation - Subsidiary method and the standard method (Reconfirmed 2013) |
AS 1289.3.8.2-2008 | Methods of testing soils for engineering purposes Soil classification tests - Dispersion - Determination of the percent dispersion of a soil (Reconfirmed 2016) |
AS 1379-2007 | Specification and supply of concrete (Reconfirmed 2017) |
AS 1289.6.7.1-2001 | Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of permeability of a soil - Constant head method for a remoulded specimen (Reconfirmed 2013) |
AS 1289.3.6.3-2003 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the particle size distribution of a soil - Standard method of fine analysis using a hydrometer |
AS 1289.1.4.1-1998 | Methods of testing soils for engineering purposes Sampling and preparation of soils - Selection of sampling or test sites - Random number method (Reconfirmed 2013) |
AS 3799-1998 | Liquid membrane-forming curing compounds for concrete (Reconfirmed 2018) |
AS 1289.6.1.1:2014 | Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of the California Bearing Ratio of a soil - Standard laboratory method for a remoulded specimen |
AS/NZS 4456.2:2003 | Masonry units, segmental pavers and flags - Methods of test Assessment of mean and standard deviation (Reconfirmed 2023) |
AS/NZS 4456.13:2003 | Masonry units, segmental pavers and flags - Methods of test Determining pitting due to lime particles (Reconfirmed 2023) |
AS/NZS 4456.1:2003 | Masonry units, segmental pavers and flags - Methods of test Sampling for test (Reconfirmed 2023) |
AS 1289.5.3.1-2004 | Methods of testing soils for engineering purposes Soil compaction and density tests - Determination of the field density of a soil - Sand replacement method using a sand-cone pouring apparatus (Reconfirmed 2016) |
AS 1289.7.1.3-1998 | Methods of testing soils for engineering purposes Soil reactivity tests - Determination of the shrinkage index of a soil - Core shrinkage index (Reconfirmed 2013) |
AS 1289.5.4.1-2007 | Methods of testing soils for engineering purposes Soil compaction and density tests - Compaction control test - Dry density ratio, moisture variation and moisture ratio (Reconfirmed 2016) |
AS 1289.6.7.2-2001 | Methods of testing soils for engineering purposes Soil strength and consolidation tests - Determination of permeability of a soil - Falling head method for a remoulded specimen (Reconfirmed 2013) |
AS 1289.1.3.1:2015 | Methods of testing soils for engineering purposes Sampling and preparation of soils - Undisturbed samples - Standard method |
AS/NZS 4456.4:2003 | Masonry units, segmental pavers and flags - Methods of test Determining compressive strength of masonry units |
AS 1289.3.4.1-2008 | Methods of testing soils for engineering purposes Soil classification tests - Determination of the linear shrinkage of a soil - Standard method |
AS 1289.3.8.1-2006 | Methods of testing soils for engineering purposes Soil classification tests - Dispersion - Determination of Emerson class number of a soil |
AS 1289.5.8.7-1998 | Methods of testing soils for engineering purposes Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using hydrogen content of components |
AS/NZS 4456.12:2003 | Masonry units and segmental pavers and flags - Methods of test Determining coefficients of contraction (Reconfirmed 2023) |
AS/NZS 4456.16:2003 | Masonry units, segmental pavers and flags - Methods of test Determining permeability to water (Reconfirmed 2023) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.