Customer Support: 131 242

  • Shopping Cart
    There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

AS 3730.11-1991

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Guide to the properties of paints for buildings Solvent-borne - Interior - Full gloss enamel

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

01-01-1991

Superseded date

20-02-2024

Superseded by

AS 3730.6-2006

$47.81
Including GST where applicable

1 - AS 3730.11-1991 GUIDE TO THE PROPERTIES OF PAINTS FOR BUILDINGS - SOLVENT-BORNE-INTERIOR-FULL GLOSS ENAMEL
4 - PREFACE
4 - CONTENTS
5 - 1 SCOPE
5 - 2 REFERENCED DOCUMENTS
5 - 3 DEFINITIONS
5 - 3.1 Approximate colour match
5 - 3.2 Frying
5 - 3.3 Working up
5 - 4 TYPICAL PROPERTIES AND CHARACTERISTICS
5 - 4.1 Composition
5 - 4.2 Conditions of test
5 - 4.3 Liquid paint
5 - 4.3.1 Condition in container
5 - 4.3.2 Fineness of grind
5 - 4.3.3 Volume solids
5 - 4.3.4 Susceptibility to skinning
6 - 4.3.5 Storage stability
6 - 4.3.6 Viscosity
6 - 4.4 Application properties
6 - 4.4.1 General
6 - 4.4.2 Brushing
6 - 4.4.3 Rolling
6 - 4.4.4 Spraying
6 - 4.5 Applied film
6 - 4.5.1 Dry times
6 - 4.5.2 Recoating properties and finish
6 - 4.5.3 Gloss
6 - 4.5.4 Colour
6 - 4.5.5 Resistance to yellowing
6 - 4.5.6 Opacity
6 - 5 PACKAGING
6 - 6 LABELLING
8 - APPENDIX A - LIST OF REFERENCED DOCUMENTS

AS 3730.11-1991 provides a guide to the features and typical characteristics that are expectedof a solvent-borne, interior full gloss enamel finish when applied by brush, roller or spray, in accordance with the manufacturer’s instructions.

Committee
CH-003
DocumentType
Standard
ISBN
0 7262 7042 3
Pages
4
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes
UnderRevision

This document provides a guide to the features and typical characteristics that are expected of a solvent-borne, interior full gloss enamel finish when applied by brush, roller or spray, in accordance with the manufacturer's instructions. Paints satisfying the requirements of this guide are equivalent to Type 5 paint of AS 2311.

First published as AS 3730.11-1991.

AS 3730.14-1991 Guide to the properties of paints for buildings Undercoat - Solvent-borne - Interior/exterior
AS/NZS 1580.211.2:1995 Paints and related materials - Methods of test Ease of manual re-incorporation
AS/NZS 1580.461.1:1995 Paints and related materials - Methods of test Determination of resistance to yellowing (dark chamber)
AS 1580.204.1-1990 Paints and related materials - Methods of test Fineness of grind
AS 2905-2005 Steel drums
AS 1580.101.5-1986 Paints and related materials - Methods of test Conditions of test, temperature and humidity controlled
AS 2458-1982 Hardboard
AS 1580.401.3-1990 Paints and related materials - Methods of test Drying times using a BK-type recorder
AS/NZS 1580.205.3:1997 Paints and related materials - Methods of test Application properties - Roller coating
AS/NZS 1580.103.1:1995 Paints and related materials Methods of test - Examination and preparation of samples for testing (Reconfirmed 2013)
AS 2302-1980 Undercoat, solvent borne, exterior/interior
AS 1580.213.2-2004 Paints and related materials - Methods of test Dry hiding power - Contrast ratio
AS/NZS 1580.101.1:1999 Paints and related materials - Methods of test Conditions of test - Temperature, humidity and airflow control (Reconfirmed 2013)
AS 1580.213.2-1992 Paints and related materials - Methods of test Dry hiding power - Contrast ratio
AS/NZS 1580.204.1:1998 Paints and related materials - Methods of test Fineness of grind
AS 1580.205.3-1981 Paints and related materials - Methods of test Application properties - Roller coating
AS 3730.0-2006 Guide to the properties of paints for buildings General information on the specification, purchasing and testing of paints
AS 1580.602.2-1974 Paints and related materials - Methods of test Specular gloss
AS 1580.103.1-1980 Paints and related materials - Methods of test Preliminary examination and preparation for testing
AS 1580.214.0-1990 Paints and related materials - Methods of test Rheological properties - Guide to test methods
AS/NZS 1580.601.1:1995 Paints and related materials - Methods of test Colour - Visual comparison (Reconfirmed 2013)
AS 1580.203.1-1993 Paints and related materials - Methods of test Skin formation
AS 1580.205.2-1981 Paints and related materials - Methods of test Application properties - Conventional air spraying
AS/NZS 1580.211.1:1995 Paints and related materials - Methods of test Degree of settling
AS 2311-1992 The painting of buildings
AS/NZS 2310:2002 Glossary of paint and painting terms
AS/NZS 1580.213.1:1997 Paints and related materials - Methods of test Relative dry hiding power (Reconfirmed 2013)
AS 2905-1986 Steel drums
AS 2854-2004 Tinplate cans for general use
AS 3730.14-2006 Guide to the properties of paints for buildings Undercoat - Solvent-borne - Interior/exterior
AS 1580.211.2-1980 Paints and related materials - Methods of test Ease of manual re-incorporation
AS 1580.601.1-1975 Paints and related materials - Methods of test Colour - Visual comparison
AS 3730.0-1991 Guide to the properties of paints for buildings - General information on the specification, purchasing and testing of paints
AS 1580.401.3-2002 Paints and related materials - Methods of test Drying times using a BK-type recorder (Reconfirmed 2013)
AS 2854-1986 Tinplate cans for general use
AS 1580.203.1-2004 Paints and related materials - Methods of test Skin formation
AS 1580.603.1-1992 Paints and related materials - Methods of test Finish
AS/NZS 1580.205.2:1997 Paints and related materials - Methods of test Application properties - Conventional spraying
AS 1580.461.1-1977 Paints and related materials - Methods of test Determination of resistance to yellowing (dark chamber)
AS 1580.301.2-1990 Paints and related materials - Methods of test Non-volatile content by volume (volume solids)
AS/NZS 1580.101.5:1999 Paints and related materials - Methods of test Conditions of test - Temperature and humidity control (Reconfirmed 2013)
AS 2310-1980 Glossary of paint and painting terms
AS/NZS 1580.214.0:1996 Paints and related materials - Methods of test Rheological properties - Guide to test methods (Reconfirmed 2013)
AS 1580.101.1-1986 Paints and related materials - Methods of test Air drying conditions
AS 1580.213.1-1981 Paints and related materials - Methods of test Relative dry hiding power
AS 1580.205.4-1981 Paints and related materials - Methods of test Application properties - Airless spraying
AS/NZS 1580.205.4:1998 Paints and related materials - Methods of test Application properties - Airless spraying
AS/NZS 1580.602.2:1995 Paints and related materials - Methods of test Measurement of specular gloss of non-metallic paint films at 20°, 60° and 85° (Reconfirmed 2013)
AS 1580.211.1-1980 Paints and related materials - Methods of test Degree of settling
AS 1580.205.1-1981 Paints and related materials - Methods of test Application properties - Brushing
AS/NZS 1580.205.1:1997 Paints and related materials - Methods of test Application properties - Brushing
AS 1580.603.1-2002 Paints and related materials - Methods of test Finish - General appearance

AS 1580.481.0-2003 Paints and related materials - Methods of test Coatings - Guide to assessing paint systems exposed to weathering conditions
AS 3730.13-1991 Guide to the properties of paints for buildings Primer - Wood - Solvent-borne - Interior/exterior
AS 3730.23-1993 Guide to the properties of paints for buildings Latex - Wallboard and masonry sealer
AS 2311-1992 The painting of buildings
AS/NZS 2311:2000 Guide to the painting of buildings
AS 3730.18-1993 Guide to the properties of paints for buildings Undercoat - Latex - Interior/exterior

$47.81
Including GST where applicable