AS 3771-1998

1 - AS 3771-1998 ROAD LIGHTING LUMINAIRES WITH INTEGRAL CONTROL GEAR
4 - PREFACE
5 - CONTENTS
7 - SECTION 1 SCOPE AND GENERAL
7 - 1.1 SCOPE
7 - 1.2 APPLICATION
7 - 1.3 REFERENCED DOCUMENTS
7 - 1.4 DEFINITIONS
7 - 1.4.1 Aeroscreen luminaire
7 - 1.4.2 Category B luminaire
8 - 1.4.3 Category V luminaire
8 - 1.4.4 Luminaire
8 - 1.4.5 Post-top luminaire
8 - 1.4.6 Rated voltage
8 - 1.4.7 Side-entry luminaire
8 - 1.4.8 Type P (photoelectrically controlled) luminaire
8 - 1.4.9 Type R (remotely switched) luminaire
8 - 1.5 ENVIRONMENTAL CONDITIONS
8 - 1.6 MARKING
8 - 1.6.1 Identification of manufacture
8 - 1.6.2 Coded information on luminaire
9 - 1.6.3 Additional marking for Category B luminaires with high pressure sodium lamps
9 - 1.7 EQUIPMENT TO BE PROVIDED
10 - SECTION 2 MECHANICAL AND PHYSICAL REQUIREMENTS
10 - 2.1 SCOPE OF SECTION
10 - 2.2 GENERAL DESIGN AND ARRANGEMENT
10 - 2.2.1 Form and construction
10 - 2.2.2 Required protection
10 - 2.3 LUMINAIRE BODY
10 - 2.3.1 Material
10 - 2.3.2 Component fixing devices
10 - 2.3.3 Seals and gaskets
11 - 2.4 VISORS
11 - 2.4.1 Function
11 - 2.4.2 Attachment to luminaire body
11 - 2.4.3 Materials and construction
11 - 2.5 OPTICAL SYSTEM
12 - 2.6 FIXING SPIGOT ENTRY
12 - 2.6.1 Form and dimensions
12 - 2.6.2 Means of attachment
12 - 2.6.3 Adjustment of upcast (for Category V luminaires)
13 - 2.7 MAXIMUM MASS (FOR SIDE-ENTRY LUMINAIRES)
14 - SECTION 3 ELECTRICAL WIRING AND COMPONENTS
14 - 3.1 SCOPE OF SECTION
14 - 3.2 ELECTRICAL SUPPLY
14 - 3.3 ESSENTIAL SAFETY REQUIREMENTS
14 - 3.4 CABLE ENTRY
14 - 3.5 TERMINAL BLOCK
14 - 3.6 BALLASTS
14 - 3.7 LAMPHOLDERS
15 - 3.8 ARRANGEMENT OF CONTROL GEAR
15 - 3.8.1 Mounting of equipment
15 - 3.8.2 Hinged trays
15 - 3.9 SOCKET FOR PHOTOELECTRIC CELL SWITCH (FOR TYPE P LUMINAIRES)
15 - 3.9.1 Base type
15 - 3.9.2 Connection arrangement (for Category B luminaires)
15 - 3.9.3 Colour coding of connecting wiring
15 - 3.10 INTERNAL WIRING
17 - SECTION 4 ADDITIONAL REQUIREMENTS FOR PARTICULAR LUMINAIRES
17 - 4.1 SCOPE OF SECTION
17 - 4.2 CATEGORY V LUMINAIRES
17 - 4.2.1 Luminaires for high pressure mercury vapour lamps
17 - 4.2.2 Luminaires for high pressure sodium vapour lamps
18 - 4.3 CATEGORY B LUMINAIRES
18 - 4.3.1 Luminaires for high pressure mercury vapour lamps
18 - 4.3.2 Luminaires for high pressure sodium vapour lamps
18 - 4.3.3 Luminaires for low pressure sodium vapour lamps.
18 - 4.4 OPTIONAL COMPONENTS (CATEGORY V AND CATEGORY B LUMINAIRES)
18 - 4.4.1 Power factor correction capacitors
19 - 4.4.2 Blocking inductor
19 - 4.4.3 Overcurrent protection
19 - 4.4.4 Interference suppression capacitors
21 - SECTION 5 PERFORMANCE AND TESTING
21 - 5.1 SCOPE OF SECTION
21 - 5.2 TESTING OF TYPE P LUMINAIRES
21 - 5.3 BALLAST LOSSES
21 - 5.4 LAMP OPERATION
21 - 5.5 PHOTOMETRIC PERFORMANCE
21 - 5.5.1 Category V luminaires
22 - 5.5.2 Category B luminaires
22 - 5.6 WIND FORCE TEST
22 - 5.6.1 Test conditions and procedure
22 - 5.6.2 Test criteria
22 - 5.7 DUST TEST
22 - 5.7.1 Application of test
22 - 5.7.2 Test conditions and procedure
23 - 5.7.3 Test criteria
24 - 5.8 IMPULSE VOLTAGE TEST
24 - 5.8.1 Test conditions and procedure
24 - 5.8.2 Test criteria
24 - 5.9 GENERAL CONDITIONS FOR ENDURANCE AND THERMAL TESTS.
24 - 5.9.1 Selection of lamps
24 - 5.9.2 Mounting of luminaire
24 - 5.9.3 Connection to supply
24 - 5.9.4 Temperature measurements
24 - 5.9.5 Application of temperature limits
24 - 5.10 ENDURANCE TEST
24 - 5.10.1 General
24 - 5.10.2 Test conditions and procedure
25 - 5.10.3 Test criteria
25 - 5.11 THERMAL TEST (NORMAL OPERATION)
25 - 5.11.1 Test conditions and procedure
26 - 5.11.2 Test criteria
27 - 5.12 TEMPERATURE TEST (ABNORMAL OPERATION)
27 - 5.12.1 Application of test
27 - 5.12.2 Test conditions and procedure
28 - 5.12.3 Test criteria
30 - SECTION 6 SUPPORTING DOCUMENTATION
30 - 6.1 SCOPE OF SECTION
30 - 6.2 GENERAL INFORMATION
30 - 6.3 PHOTOMETRIC INFORMATION
30 - 6.3.1 General
30 - 6.3.2 Luminous intensity data
30 - 6.3.3 Isolux diagrams (for Category V luminaires)
30 - 6.3.4 Isolux diagrams (for Category B luminaires)
31 - 6.4 EVIDENCE OF COMPLIANCE
32 - APPENDIX A - INFORMATION TO BE SUPPLIED WITH ENQUIRY OR ORDER
33 - APPENDIX B - LIST OF REFERENCED DOCUMENTS
35 - APPENDIX C - SELECTION OF TEST LAMPS
36 - APPENDIX D - MEANS FOR DEMONSTRATING COMPLIANCE WITH THIS STANDARD
36 - D1 SCOPE
36 - D2 STATISTICAL SAMPLING
36 - D3 PRODUCT CERTIFICATION
36 - D4 SUPPLIER'S QUALITY SYSTEM
37 - D5 OTHER MEANS OF ASSESSMENT

Specifies requirements for the design, construction, performance and testing of road lighting luminaires with integral control gear, to ensure their suitability for the operating and environmental conditions to which they will be subjected in service. Applies to luminaires with discharge lamps of various types and ratings, which are designed to provide road lighting of Category V in accordance with AS/NZS 1158.1.1 or Category B in accordance with AS 1158.1.

This Standard applies to luminaires with integral control gear which are designed to provide road lighting of Category V in accordance with AS/NZS 1158.1.1 or Category B in accordance with AS 1158.1. It specifies requirements for the design, construction, performance and testing of the luminaires and for the supporting documentation which should be provided.NOTE: Appendix A lists the information which should be supplied by the purchaser with an enquiry or order for road lighting luminaires complying with this Standard.

First published as AS 3771-1990.
Second edition 1998.