Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

AS 5200.000-2006

Current

Current

The latest, up-to-date edition.

Technical specification for plumbing and drainage products Procedures for certification of plumbing and drainage products (Reconfirmed 2018)

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

23-06-2006

Preview

1 - AS 5200.000-2006 PLUMBING AND DRAINAGE PRODUCTS - PROCEDURES FOR CERTIFICATION OF PLUMBING AND DRAINAGE PRODUCTS
4 - PREFACE
5 - CONTENTS
6 - INTRODUCTION
7 - 1 SCOPE AND GENERAL
7 - 1.1 Scope
7 - 1.2 Reference documents
7 - 2 DEFINITIONS
7 - 2.1 Approved user
7 - 2.2 Conformity Assessment Body (CAB)
7 - 2.3 Licence (WaterMark)
7 - 2.4 Manufacturer's (or supplier's) warranty
7 - 2.5 Permitted product
8 - 2.6 Plumbing Code of Australia (PCA)
8 - 2.7 Recognized testing laboratory
8 - 2.8 Specification
8 - 3 MARKING
8 - 4 CERTIFICATION
8 - 4.1 Procedure for WaterMark certification
8 - 4.2 Minimum levels of certification
9 - 4.3 Unlisted products
9 - 4.4 Initial requests
9 - 4.5 Renewal
9 - 4.6 Notification
9 - 4.7 Procedures
9 - 4.8 Product with integral components
9 - 4.9 Products outside the WaterMark Scheme
12 - 5 SCHEDULE OF SPECIFICATIONS
18 - 6 PRODUCTS USED IN URBAN WATER INDUSTRY NETWORK INFRASTRUCTURE
19 - APPENDIX A - REFERENCED STANDARDS SPECIFICATIONS
24 - APPENDIX B - A GUIDE TO THE USE OF WATERMARK ON PLUMBING AND DRAINAGE PRODUCTS SUPPLIED UNDER THE WMCS
24 - B1 REQUIREMENT FOR CERTIFICATION MARKING
24 - B2 PLANNING FOR PRODUCT MARKING
24 - B3 MARKING WHERE SPACE IS LIMITED
24 - B4 POSITIONING OF CERTIFICATION MARKS
25 - B5 OBTAINING APPROVAL FROM THE CAB
27 - APPENDIX C - A GUIDE TO THE PROCESS OF CERTIFICATION OF THOSE PRODUCTS THAT ARE NOT LISTED BUT REQUIRE CERTIFICATION
27 - C1 INTRODUCTION
27 - C2 THE PROCESS
27 - C3 PRODUCT/INSTALLATION REVIEW
27 - C4 DEVELOPMENT OF A TECHNICAL SPECIFICATION
28 - C5 APPLICATION TO TECHNICAL REVIEW COMMITTEE
29 - C6 TECHNICAL GROUP REVIEW PROCESS
29 - C7 PUBLICATION OF THE SPECIFICATION
29 - C8 FINALIZATION
30 - APPENDIX D - PRODUCTS OUTSIDE THE WATERMARK SCHEME

This Standard nominates Standards and Australian Technical Specifications (ATS) for certification of plumbing and drainage products that are generally intended for installation, replacement, repair, alteration and maintenance by authorized persons in works described the Scope of the Plumbing Code of Australia (PCA).

This Standard nominates Standards and Australian Technical Specifications (ATS) for certification of plumbing and drainage products that are generally intended for installation, replacement, repair, alteration and maintenance by authorized persons in works described the Scope of the Plumbing Code of Australia (PCA).NOTE: The PCA refers to materials and products throughout the document. For the purposes of this Standard, the term products includes materials.

Committee
WS-031
DocumentType
Standard
ISBN
0 7337 7535 7
Pages
24
ProductNote
Reconfirmed 21/09/2018.
This standard has been reconfirmed in Australia in 2018 and remains current in New Zealand. Reconfirmation Notice 21/09/2018
PublisherName
Standards Australia
Status
Current
Supersedes

First published as MP 52-1988.
Previous edition 2005.
Revised and redesignated as AS 5200.000-2005.
Second edition 2006.
Reconfirmed 2018. Originated as MP 52-1988. Previous edition 2005. Revised and redesignated as AS 5200.000-2005. Second edition 2006.

ATS 5200.105-2005
ATS 5200.014-2004 Technical Specification for plumbing and drainage products - Jointing materials
AS 2638.2-2002 Gate valves for waterworks purposes - Resilient seated
ATS 5200.999-2005 Technical Specification for plumbing and drainage products Developing technical specifications
AS 3565.2-2004 Meters for water supply - Combination meters
ATS 5200.020-2004 Technical Specification for plumbing and drainage products Flushing valves for water closets and urinals - for use with mains supply
ATS 5200.460-2005 Technical Specification for plumbing and drainage products Grey water diversion device (GWDD)
ATS 5200.469-2005 Technical Specification for plumbing and drainage products Waterless or limited flush urinals - With an integral sealing device
AS/NZS 4401:2006 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polyethylene (PE) (Reconfirmed 2017)
AS 1172.2-1999 Water closet (WC) pans of 6/3 L capacity or proven equivalent Cisterns
AS 1357.1-2004 Valves primarily for use in heated water systems Protection valves
AS/NZS 3499:1997 Flexible tube connectors for water supply
AS 3517-1995 Capillary fittings of copper and copper alloy for non-pressure sanitary plumbing applications
ATS 5200.004-2005 Technical Specification for plumbing and drainage products Urinal flushing cisterns
AS ISO/IEC 17025-2005 General requirements for the competence of testing and calibration laboratories (Reconfirmed 2016)
ATS 5200.017-2005 Technical Specification for plumbing and drainage products Cistern outlet valves
ATS 5200.016-2005 Technical Specification for plumbing and drainage products - Cistern inlet valves
AS 1432-2004 Copper tubes for plumbing, gasfitting and drainage applications
ATS 5200.453-2004 Technical Specification for plumbing and drainage products Heated water systems - Thermostatic circulation valve
AS 4794-2001 Non-return valves for waterworks purposes - Swing check and tilting disc (Reconfirmed 2015)
AS/NZS 4327:1995 Metal-banded flexible couplings for low-pressure applications (Reconfirmed 2020)
AS/NZS 4130:2003 Polyethylene (PE) pipes for pressure applications
AS 4032.1-2005 Water supply - Valves for the control of heated water supply temperatures Thermostatic mixing valves - Materials design and performance requirements
AS 1589-2001 Copper and copper alloy waste fittings (Reconfirmed 2018)
ATS 5200.040-2005 Waste pipe connection outlets and gratings, separate or integral
AS 2638.1-2002 Gate valves for waterworks purposes Metal seated
ATS 5200.479-2006 Flood stop safety valve
MP 78-1999 Manual for the assessment of risks of plumbing products
AS 3565.1-2004 Meters for water supply Cold water meters
ATS 5200.053-2006 Technical Specification for plumbing and drainage products Stainless steel pipes and tubes
ATS 5200.026-2004 Technical Specification for plumbing and drainage products Cold water storage tanks
AS 1646.3-2000 Elastomeric seals for waterworks purposes - Material requirements for pipe joints seals used in water and wastewater applications with the exception of natural rubber and polyisoprene compounds
ATS 5200.420-2005 Technical Specification for plumbing and drainage products Trap-priming valves
AS 4796-2001 Water supply - Metal bodied and plastic bodied ball valves for property service connection
ATS 5200.103-2004 Technical Specification for plumbing and drainage products - Water treatment systems (other than those specified in AS/NZS 3497)
ATS 5200.101-2005 Appliances (low hazard rating)
ATS 5200.012-2005 Technical Specification for plumbing and drainage products In-line valves for use in plumbing water supply systems - Miscellaneous types metallic and non-metallic
ATS 5200.485-2006 Pressure compensating tank
AS 1646.2-2000 Elastomeric seals for waterworks purposes Material requirements for pipe joint seals used in water and wastewater applications - Specifies by prescription formulation
ATS 5200.467-2004 Technical Specification for plumbing and drainage products Rainwater tank connection valve
ATS 5200.463-2005 Positive air pressure attenuator
ATS 5200.464-2004 Technical Specification for plumbing and drainage products - Hot water manual or sensor-activated pumping systems
AS 2537-1994 Mechanical jointing fittings for use with cross-linked polyethylene (PE-X) pipe for hot and cold water applications
ATS 5200.007-2004 Technical Specification for plumbing and drainage products - Water hammer arrestors
AS 1172.1-2005 Water closets (WC) Pans
AS/NZS 3662:2005 Performance of showers for bathing
AS 3498-2003 Authorization requirements for plumbing products - Water heaters and hot-water storage tanks
AS 1910-2004 Water supply - Float control valves for use in hot and cold water (Reconfirmed 2016)
ATS 5200.021-2004 Technical Specification for plumbing and drainage products Flushing valves for water closets and urinals - for use with break tank supply
AS 1628-1999 Water supply - Metallic gate, globe and non-return valves (Reconfirmed 2015)
AS/NZS 1477:1999 PVC pipes and fittings for pressure applications
AS/NZS 3518:2004 Acrylonitrile butadiene styrene (ABS) compounds, pipes and fittings for pressure applications
AS/NZS ISO 9000:2006 Quality management systems - Fundamentals and vocabulary
ATS 5200.030-2004 Technical Specification for plumbing and drainage products - Solenoid valves
AS/NZS 2642.2:1994 Polybutylene pipe systems - Polybutylene (PB) pipe for hot and cold water applications
AS 2887-1993 Plastic waste fittings
ATS 5200.458-2004 Technical Specification for plumbing and drainage products Universal transition fitting
AS/NZS 4765(INT):2000 Modified PVC (PVC-M) pipes for pressure applications
AS/NZS 3982:1996 Urinals
ATS 5200.459-2004
AS 2419.3-1996 Fire hydrant installations - Fire brigade booster connections
ATS 5200.052-2005 Metallic-bodied inlet pressure control valves greater than DN 50
ATS 5200.051-2005 Technical Specification for plumbing and drainage products Bidet douche seats
AS/NZS 3879:1995 Solvent cements and priming fluids for use with unplasticized PVC (uPVC) pipes and fittings
ATS 5200.471-2005 Technical specification for plumbing and drainage products Stainless steel tubes and mechanical compression fittings for pressure applications - Alternative systems
AS 3565.3-2004 Meters for water supply - Water meters with integral dual check valves
AS/NZS 2845.1:1998 Water supply - Backflow prevention devices Materials, design and performance requirements
AS 4181-1999 Stainless steel clamps for waterworks purposes
AS 3494-1997 Bidettes and bidets
AS 3952-2002 Water supply - Spring hydrant valve for waterworks purposes (Reconfirmed 2015)
AS 1646.4-2005 Elastomeric seals for waterworks purposes Material requirements for pipe joint seals used in water and wastewater applications - Thermoplastic elastomers and vulcanizates
AS 1357.2-2005 Valves primarily for use in heated water systems Control valves (Reconfirmed 2015)
AS/NZS 5065:2005 Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications (Reconfirmed 2017)
AS 3795-1996 Copper alloy tubes for plumbing and drainage applications
AS/NZS 4129:2000 Fittings for polyethylene (PE) pipes for pressure applications
AS 3691-1989 Solvent cement and priming (cleaning) fluids for use with ABS pipes and fittings
ATS 5200.037.2-2005 Technical Specification for plumbing and drainage products Flow controllers - For use in heated or cold water plumbing systems
AS 1646.1-2000 Elastomeric seals for waterworks purposes - General requirements
ATS 5200.466-2004 Technical Specification for plumbing and drainage products - Rainwater tank connection devices
AS 3688-2005 Water supply - Metallic fittings and end connectors
AS 3571-1989 Glass filament reinforced thermosetting plastics (GRP) pipes - Polyester based - Water supply, sewerage and drainage applications
ATS 5200.047-2005 Technical Specification for plumbing and drainage products Self-sealing devices
ATS 5200.461-2004 Technical Specification for plumbing and drainage products Stainless steel tubes and mechanical compression fittings for pressure applications
ATS 5200.477-2006 Technical Specification for plumbing and drainage products Rainwater/mains supply changeover devices
ATS 5200.006-2005 Technical Specification for plumbing and drainage products Reflux valves - Sewerage
AS/NZS 1260:2002 PVC-U pipes and fittings for drain, waste and vent application
ATS 5200.050-2005 Technical Specification for plumbing and drainage products Prefabricated bathroom modules
AS 3996-2006 Access covers and grates
ATS 5200.476-2006 Technical Specification for plumbing and drainage products Heated water systems - Leak protection device
MP 52-2005 Manual of authorization procedures for plumbing and drainage products
AS 4139-2003 Fibre-reinforced concrete pipes and fittings (Reconfirmed 2018)
ATS 5200.472-2006 Technical Specification for plumbing and drainage products Heated water system recirculation device
ATS 5200.481-2006 Technical Specification for plumbing and drainage products Thermal switching valves
AS/NZS 3718:2005 Water supply - Tap ware (Reconfirmed 2016)
AS/NZS 3500.0:2003 Plumbing and drainage Glossary of terms
AS 4441(INT)-2003 Oriented PVC (PVC-O) pipes for pressure applications
AS ISO/IEC 17030-2004 Conformity assessment - General requirements for third-party marks of conformity
ATS 5200.468-2005 Technical Specification for plumbing and drainage products Hot water systems - Recirculation valves
AS 1631-1994 Cast grey and ductile iron non-pressure pipes and fittings (Reconfirmed 2018)
ATS 5200.046-2005 Technical Specification for plumbing and drainage products Diversion systems - Wash down and first flush
AS 2492-1994 Cross-linked polyethylene (PE-X) pipe for hot and cold water applications
ATS 5200.037.1-2006
AS 3565.5-2004 Meters for water supply - Water meters with two integral single check valves
AS 2419.2-1994 Fire hydrant installations Fire hydrant valves
ATS 5200.028-2004 Technical Specification for plumbing and drainage products - Commercial food waste disposal unit
AS/NZS 3497:1998 Drinking water treatment units - Plumbing requirements
AS 3495-1997 Stainless steel non-pressure pipes and fittings (Reconfirmed 2018)
AS/NZS 4999:2006 PVC-U maintenance shafts
ATS 5200.104-2005 Appliances (miscellaneous)
ATS 5200.033-2004 Technical Specification for plumbing and drainage products Spraying apparatus/dispensing units with the option of chemical additions - Hose connected
AS/NZS 4936:2002 Air admittance valves (AAVs) for use in sanitary plumbing and drainage systems (Reconfirmed 2020)
AS 4176-1994 Polyethylene/aluminium and cross-linked polyethylene/aluminium macro-composite pipe systems for pressure applications
ATS 5200.042-2004 Technical Specification for plumbing and drainage products - Roll-grooved jointing systems
AS 4032.2-2005 Water supply - Valves for the control of hot water supply temperatures Tempering valves and end-of-line temperature-actuated devices (Reconfirmed 2015)
AS/NZS 2280:2004 Ductile iron pipes and fittings
ATS 5200.478-2006 Technical Specification for plumbing and drainage products Cross-linked polyethylene/Aluminium/Cross-linked polyethylene macro-composite pipe systems for pressure applications
AS/NZS 2642.3:1994 Polybutylene pipe systems Mechanical jointing fittings for use with polybutylene (PB) pipes for hot and cold water applications

ATS 5200.016-2010 Technical Specification for plumbing and drainage products Cistern inlet valves
ATS 5200.499-2008 Technical Specification for plumbing and drainage products Inline sewer dosing unit (SDU)
ATS 5200.490-2007 Technical Specification for plumbing and drainage products Cross-linked polyethylene/ aluminium/polyethylene-composite pipe systems for pressure applications (Reconfirmed 2018)
ATS 5200.055-2008 Technical specifications for plumbing and drainage products Plastics fittings - Connectors with flexible intermediate joints for drainage and sewerage applications
AS 1172.2:2014 Sanitary plumbing products Flushing devices and cistern inlet and outlet valves
ATS 5200.425-2009 Technical Specification for plumbing and drainage products Water closet (WC) suite with integral odour control device (OCD) connected to sanitary plumbing and drainage system
HB 230-2008 Rainwater Tank Design and Installation Handbook
ATS 5200.489-2009 Technical Specification for plumbing and drainage products Stainless steel flexible assemblies for plumbing applications
ATS 5200.501-2011 Technical Specification for plumbing and drainage products Anti-infiltration overflow-relief device
ATS 5200.501-2009 Technical Specification for plumbing and drainage products Anti-infiltration overflow relief point
HB 326-2008 Urban Greywater Installation Handbook for Single Households
ATS 5200.482-2006 Technical Specification for plumbing and drainage products Soil waste dump fitting
ATS 5200.472-2006 Technical Specification for plumbing and drainage products Heated water system recirculation device
ATS 5200.491-2010 Technical Specification for plumbing and drainage products Aluminium alloy piping system with plastics lining for plumbing water service applications
ATS 5200.475-2006 Technical Specification for plumbing and drainage products Heated Water Systems - Cold water recovery device
ATS 5200.481-2006 Technical Specification for plumbing and drainage products Thermal switching valves
AS 5200.053-2008 Plumbing and drainage products Stainless steel pipes and tubes for pressure applications
ATS 5200.479-2006 Flood stop safety valve
ATS 5200.030-2007 Technical Specification for plumbing and drainage products Solenoid valves
ATS 5200.485-2006 Pressure compensating tank
AS 2118.5-2008 Automatic fire sprinkler systems Home fire sprinkler systems (Reconfirmed 2020)
ATS 5200.486-2008 Technical Specification for plumbing and drainage products Sprinklers for home applications

View more information
$113.50
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more