Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

AS/NZS 3500.1:2018

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Plumbing and drainage Water Services

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

04-07-2024

Language(s)

English

Published date

29-06-2018

Preview

AS NZS 3500.1 2018 sets out requirements for the installation of water services from the point of connection to the network utility’s water supply or from an alternative drinking water supply to the points of discharge. Applies to new installations as well as alterations, additions and repairs to existing installations. KEYWORDS: Plumbing & drainage standards

Committee
WS-014
DevelopmentNote
New PDF incorporating Amendment 1.
DocumentType
Standard
ISBN
978-1-76072-125-1
Pages
116
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes
UnderRevision

This Standard specifies requirements for the design, installation and commissioning of cold water services from a point of connection to the points of discharge, and non-drinking water from a point of connection to the points of discharge. It applies to new installations as well as alterations, additions and repairs to existing installations.Illustrations used in this Standard are diagrammatic only and have been chosen without prejudice.NOTES: 1 The requirements for heated water services are set out in AS/NZS 3500.4.2 See Figure 1.1 for typical installation of a property service and water service.

First published as AS 3500.1-1990.
Second edition 1992.
Jointly revised and redesignated AS/NZS 3500.1.2:1998.
Jointly revised and redesignated AS/NZS 3500.1:2003.
Third edition 2018.
Reissued incorporating Amendment No. 1 (July 2019).

AS 2700-2011 Colour standards for general purposes (Reconfirmed 2022)
AS 1074-1989 Steel tubes and tubulars for ordinary service (Reconfirmed 2018)
AS 2118.3-2010 Automatic fire sprinkler systems Deluge systems
AS/NZS 4792:2006 Hot-dip galvanized (zinc) coatings on ferrous hollow sections, applied by a continuous or a specialized process (Reconfirmed 2017)
AS 4728-2005 Electric resistance welded steel pipe for pressure purposes (Reconfirmed 2016)
AS 1172.2:2014 Sanitary plumbing products Flushing devices and cistern inlet and outlet valves
AS 1172.1:2014 Sanitary plumbing products Water closet pans
AS/NZS 4020:2005 Testing of products for use in contact with drinking water
AS/NZS 2544:1995 Grey iron pressure fittings
AS/NZS 3500.0:2003 Plumbing and drainage Glossary of terms
AS/NZS 2280:2014 Ductile iron pipes and fittings
AS/NZS 2492:2007 Cross-linked polyethylene (PE-X) pipes for pressure applications
AS 4176.1-2010 Multilayer pipes for pressure applications Multilayer piping systems for hot and cold water plumbing applications - General (ISO 21003-1:2008, MOD) (Reconfirmed 2022)
AS 2118.1:2017 Automatic fire sprinkler systems General systems
AS/NZS 1167.1:2005 Welding and brazing - Filler metals Filler metal for brazing and braze welding
AS 5200.053-2008 Plumbing and drainage products Stainless steel pipes and tubes for pressure applications
AS/NZS 3718:2005 Water supply - Tap ware (Reconfirmed 2016)
AS/NZS 2537.3:2011 Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Fitness for purpose of the system (ISO 15875-5:2003, MOD) (Reconfirmed 2022)
AS/NZS 2642.2:2008 Polybutylene (PB) plumbing pipe systems Polybutylene (PB) pipe for hot and cold water applications (Reconfirmed 2022)
AS/NZS 4671:2001 Steel reinforcing materials
AS 2118.6-2012 Automatic fire sprinkler systems Combined sprinkler and hydrant systems in multistorey buildings
AS/NZS 3879:2011 Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS and ASA pipes and fittings
AS 3660.1:2014 Termite management New building work
AS 2129-2000 Flanges for pipes, valves and fittings (Reconfirmed 2016)
AS 4809:2017 Copper pipe and fittings - Installation and commissioning
AS/NZS 4129:2008 Fittings for polyethylene (PE) pipes for pressure applications
AS/NZS 3518:2013 Acrylonitrile butadine styrene (ABS) compounds, pipes and fittings for pressure applications (Reconfirmed 2024)
AS/NZS 2648.1:1995 Underground marking tape Non-detectable tape (Reconfirmed 2020)
AS/NZS 4331.1:1995 Metallic flanges Steel flanges (Reconfirmed 2020)
AS/NZS 4331.3:1995 Metallic flanges Copper alloy and composite flanges (Reconfirmed 2020)
AS 4176.3-2010 Multilayer pipes for pressure applications Multilayer piping systems for hot and cold water plumbing applications - Fittings (ISO 21003-3:2008, MOD)
AS 4176.7-2010 Multilayer pipes for pressure applications Multilayer piping systems for hot and cold water plumbing applications - Assessment of conformity (ISO/TS 21003-7:2008, MOD)
AS/NZS 2878:2000 Timber - Classification into strength groups
AS 2118.4-2012 Automatic fire sprinkler systems Sprinkler protection for accommodation buildings not exceeding four storeys in height
AS 1379-2007 Specification and supply of concrete (Reconfirmed 2017)
AS/NZS 2537.2:2011 Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Fittings (ISO 15875-3:2003, MOD) (Reconfirmed 2022)
AS/NZS 2537.1:2011 Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - General (ISO 15875-1:2003, MOD) (Reconfirmed 2022)
AS 2941-2013 Fixed fire protection installations - Pumpset systems
AS 1319-1994 Safety signs for the occupational environment (Reconfirmed 2018)
AS/NZS 2032:2006 Installation of PVC pipe systems (Reconfirmed 2024)
AS/NZS 2537.4:2011 Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Guidance for the assessment of conformity (ISO/TS 15875-7:2003, MOD)
AS/NZS 1477:2017 PVC pipes and fittings for pressure applications
AS 4176.5-2010 Multilayer pipes for pressure applications Multilayer piping systems for hot and cold water plumbing applications - Fitness for purpose of the system (ISO 21003-5:2008, MOD) (Reconfirmed 2022)
AS 5082.1-2007 Polybutylene (PB) plumbing pipe systems - Metric series Metric polybutylene (PB) pipes for hot and cold water applications (Reconfirmed 2017)
AS/NZS 2033:2008 Installation of polyethylene pipe systems
AS 2118.5-2008 Automatic fire sprinkler systems Home fire sprinkler systems (Reconfirmed 2020)
AS 1604.1-2012 Specification for preservative treatment Sawn and round timber
AS 1646-2007 Elastomeric seals for waterworks purposes (Reconfirmed 2018)
AS/NZS 2537.5:2011 Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications - Fittings for mechanical jointing (including PE-X/metal transitions) (ISO 14531-3:2006, MOD)
AS 2441-2005 Installation of fire hose reels (Reconfirmed 2018)
AS/NZS 4680:2006 Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017)
AS 4087:2011 Metallic flanges for waterworks purposes
AS 2845.2-2010 Water supply - Backflow preventions devices Registered air gaps and registered break tanks
AS 3600-2009 Concrete structures
AS/NZS 4331.2:1995 Metallic flanges Cast iron flanges (Reconfirmed 2020)
AS 3795-1996 Copper alloy tubes for plumbing and drainage applications
AS 4176.2-2010 Multilayer pipes for pressure applications Multilayer piping systems for hot and cold water plumbing applications - Pipes (ISO 21003-2:2008, MOD) (Reconfirmed 2022)
AS 4176.8-2010 Multilayer pipes for pressure applications Multilayer pipe systems for consumer gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) - Specifications for systems (ISO 17484-1:2006, MOD)
AS/NZS 4765:2017 Modified PVC (PVC-M) pipes for pressure applications
AS 2118.2-2010 Automatic fire sprinkler systems Drencher systems
AS 1345-1995 Identification of the contents of pipes, conduits and ducts (Reconfirmed 2018)
AS 1478.1-2000 Chemical admixtures for concrete, mortar and grout Admixtures for concrete (Reconfirmed 2018)
AS/NZS 2845.1:2010 Water supply - Backflow prevention devices Materials, design and performance requirements
AS/NZS 4130:2009 Polyethylene (PE) pipes for pressure applications
AS 5082.2-2007 Polybutylene (PB) plumbing pipe systems - Metric series Mechanical and fusion jointing systems (Reconfirmed 2017)
AS 5414-2012 Bushfire water spray systems
AS/NZS 4441:2017 Oriented PVC (PVC-O) pipes for pressure applications (ISO 16422:2014, MOD)
AS 2419.1:2017 Fire hydrant installations System design, installation and commissioning
AS/NZS 1167.2:1999 Welding and brazing - Filler metals Filler metal for welding
AS 3688:2016 Water supply and gas systems - Metallic fittings and end connectors
AS 1432-2004 Copper tubes for plumbing, gasfitting and drainage applications
AS 2845.3-2010 Water supply - Backflow prevention devices Field testing and maintenance of testable devices
AS 2865-2009 Confined spaces

AS 2304:2019 Water storage tanks for fire protection systems
AS/NZS 2845.3:2020 Water supply - Backflow prevention devices Field testing and maintenance of testable devices
AS 1172.3:2019 Sanitary plumbing products Personal hygiene fixtures and appliances - Bidets and bidettes

$180.69
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more