• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 1744 : 2013

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Standard Test Method for Determination of Water in Liquid Petroleum Products by Karl Fischer Reagent (Withdrawn 2016)
Available format(s)

Hardcopy , PDF

Withdrawn date

03-05-2016

Language(s)

English

Published date

01-12-2013

CONTAINED IN VOL 05.01 2014 Defines the determination of water in the concentration from 50 to 1000 mg/kg in liquid petroleum products.

1.1This test method covers the determination of water in the concentration from 50 to 1000 mg/kg in liquid petroleum products.

1.2Values stated in SI units are to be regarded as the standard. Inch-pound units are provided for information only.

1.3This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific precautionary statements see Section 7.

Committee
D 02
DocumentType
Test Method
Pages
5
PublisherName
American Society for Testing and Materials
Status
Withdrawn
Supersedes

Standards Relationship
UNE 51216:1987 Identical

MIL-PRF-83282 Revision D:1997 HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537
MIL B 46176 : A BRAKE FLUID, SILICONE, AUTOMOTIVE, ALL WEATHER, OPERATIONAL AND PRESERVATIVE, METRIC
MIL H 87257 : 0 HYDRAULIC FLUID, FIRE RESISTANT, LOW TEMPERATURE, SYNTHETIC HYDROCARBON BASE, AIRCRAFT & MISSILE
ASTM D 6200 : 2001 : R2007 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D 6729 : 2014 : REDLINE Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100 Metre Capillary High Resolution Gas Chromatography
MIL-C-12038 Revision C:1982 CHLOROBENZENE, TECHNICAL
MIL C 87252 : B COOLANT FLUID, HYDROLYTICALLY STABLE, DIELECTRIC
DOD D 23443 : B DI-(2-ETHYLHEXYL) ADIPATE, TECHNICAL
ASTM D 7151 : 2015 : REDLINE Standard Test Method for Determination of Elements in Insulating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
SAE MS 1003-2 : 2004 Lubricants, Industrial Oils, and Related Products Type D Compressor Oils - Specification - Addendum(Cancelled Jan 2013)
ASTM D 3089 : 1997 : R2008 Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes
ASTM D 6200 : 2001 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D 3707 : 1989 : R2010 Standard Test Method for Storage Stability of Water-in-Oil Emulsions by the Oven Test Method (Withdrawn 2016)
ASTM D 3520 : 2004 Standard Test Method for Quenching Time of Heat-Treating Fluids (Magnetic Quenchometer Method) (Withdrawn 2008)
ASTM D 6666 : 2004 Standard Guide for Evaluation of Aqueous Polymer Quenchants
ASTM D 6666 : 2004 : R2009 Standard Guide for Evaluation of Aqueous Polymer Quenchants
ASTM D 3709 : 1989 : R1999 Standard Test Method for Stability of Water-in-Oil Emulsions Under Low to Ambient Temperature Cycling Conditions
ASTM D 6201 : 2004 Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation
SAE J1832:2023-02 Low-Pressure Gasoline Fuel Injector
SAE J2714:2023 Gasoline Direct Injection Pump
DOD-M-82730 Base Document:1984 4,4-METHLENEBIS (2,6-DI-TERT-BUTYLPHENOL)
MIL H 6083 : E HYDRAULIC FLUID, PETROLEUM BASE, FOR PRESERVATION AND OPERATION
MS 1007 : 2012 LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE G SLIDEWAY LUBRICANTS - SPECIFICATION
01/707860 DC : DRAFT MAY 2001 ISO/DIS 14830-1 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - TRIBOLOGY-BASED MONITORING AND DIAGNOSTICS - PART 1: GENERAL GUIDELINES
MIL H 5606 : G HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT; MISSILE AND ORDNANCE
MIL-C-47220 Revision B:1985 COOLANT FLUID, DIELECTRIC
MIL-C-429 Revision D:1982 CHLORINATED PARAFFIN, TECHNICAL
MIL-PRF-27601 Revision C:1998 HYDRAULIC FLUID, FIRE RESISTANT, HYDROGENATED POLYALPHAOLEFIN BASE, HIGH TEMPERATURE, FLIGHT VEHICLE, METRIC
MIL H 46170 : B HYDRAULIC FLUID, RUST INHIBITED, FIRE-RESISTANT, SYNTHETIC HYDROCARBON BASE
MIL-H-81019 Revision D:1984 HYDRAULIC FLUID, PETROLEUM BASE, ULTRA-LOW TEMPERATURE
SAE AMS 3185 : 1999 HYDRAULIC FLUID, NONFLAMMABLE CHLOROTRIFLUOROETHYLENE (CTFE) BASE
MIL-A-3167 Revision A:1976 ADHESIVE (FOR PLASTIC INHIBITORS)
ASTM D 4176 : 2004 : R2014 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D 4176 : 2004 : EDT 1 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D 6733 : 2001 : R2011 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography
ASTM D 4176 : 2004 : R2009 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
I.S. EN ISO 8178-5:1998 RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 5: TEST FUELS
SAE J 1832 : 2016 LOW PRESSURE GASOLINE FUEL INJECTOR
ASTM D 6666 : 2004 : R2019 Standard Guide for Evaluation of Aqueous Polymer Quenchants
ASTM D 3709 : 1989 : R2005 : EDT 1 Standard Test Method for Stability of Water-in-Oil Emulsions Under Low to Ambient Temperature Cycling Conditions
ASTM D 6733 : 2001 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Meter Capillary High Resolution Gas Chromatography
ASTM D 6733 : 2001 : R2016 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography
ASTM D 6201 : 2004 : R2014 Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation
ASTM D 4860 : 2014 : REDLINE TEST METHOD FOR FREE WATER AND PARTICULATE CONTAMINATION IN MIDDLE DISTILLATE FUELS (CLEAR AND BRIGHT NUMERICAL RATING)
SAE AMS 3021 : 2017 FLUID, REFERENCE FOR TESTING DI-ESTER (POLYOL) RESISTANT MATERIAL
ASTM D 4868 : 2017 : REDLINE Standard Test Method for Estimation of Net and Gross Heat of Combustion of Hydrocarbon Burner and Diesel Fuels
ASTM D 3709 : 1989 : R2010 Standard Test Method for Stability of Water-in-Oil Emulsions Under Low to Ambient Temperature Cycling Conditions (Withdrawn 2016)
SAE MS 1005 : 2017 LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE HF FIRE-RESISTANT HYDRAULIC FLUIDS - SPECIFICATION
ASTM D 6201 : 2004 : R2009 Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation
ASTM D 4176 : 2004 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
EN ISO 8178-5 : 1997 RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - TEST FUELS
SAE ARP 5796 : 2013 FLIGHT CRITICAL CONTROL VALVES, MILITARY AIRCRAFT
MIL-DTL-82965 Revision B:2001 PROPELLANT, GUN, HIGH ENERGY NITRAMINE
MIL E 82668 : B EXPLOSIVES, CYCLOTOL, 25/75 AND 29/71, RDX/TNT
ASTM D 3707 : 1989 : R1999 Standard Test Method for Storage Stability of Water-in-Oil Emulsions by the Oven Test Method
ASTM E 700 : 1979 : R1990 : EDT 1 Test Method for Water in Gases Using Karl Fischer Reagent (Withdrawn 1995)
ASTM D 6730 : 2001 : R2006 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100-Metre Capillary (with Precolumn) High-Resolution Gas Chromatography
MIL E 82902 : 0 EXPLOSIVE, PLASTIC BONDED, CAST PBXN-111
MIL-H-53119 Base Document:1991 HYDRAULIC FLUID, NONFLAMMABLE, CHLOROTRIFLUOROETHYLENE BASE
ASTM D 6730 : 2001 : R2016 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100–Metre Capillary (with Precolumn) High-Resolution Gas Chromatography
MIL-DTL-32040 Base Document:1999 PROPELLANT, GUN, HIGH ENERGY NITRAMINE
SAE MS 1000 : 2013 LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS - CLASSIFICATION
SAE MS 1003 : 2018 LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE D COMPRESSOR OILS - SPECIFICATION
IEEE 1205-2014 IEEE Guide for Assessing, Monitoring, and Mitigating Aging Effects on Electrical Equipment Used in Nuclear Power Generating Stations and Other Nuclear Facilities
ASTM D 6730 : 2001 : R2006 : EDT 1 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100–Metre Capillary (with Precolumn) High-Resolution Gas Chromatography
ASTM D 6666 : 2004 : R2014 Standard Guide for Evaluation of Aqueous Polymer Quenchants
ISO 81400-4:2005 Wind turbines Part 4: Design and specification of gearboxes
BS EN ISO 8178-5:1997 Reciprocating internal combustion engines. Exhaust emission measurement Test fuels
SAE J 2714 : 2015 GASOLINE DIRECT INJECTION PUMP
ASTM D 3707 : 1989 : R2005 : EDT 1 Standard Test Method for Storage Stability of Water-in-Oil Emulsions by the Oven Test Method
MIL H 27601 : B HYDRAULIC FLUID, FIRE RESISTANT, HYDROGENATED POLYALPHAOLEFIN BASE, HIGH TEMPERATURE, FLIGHT VEHICLE, METRIC
SAE MS 1010 : 2012 LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE T TURBINE OILS - SPECIFICATION
ASTM D 5599 : 2017-06 TEST METHOD FOR DETERMINATION OF OXYGENATES IN GASOLINE BY GAS CHROMATOGRAPHY AND OXYGEN SELECTIVE FLAME IONIZATION DETECTION
BS ISO 81400-4:2005 Wind turbines Design and specification of gearboxes
MIL-L-27502 Base Document:1972 LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, ESTER BASE
MIL-I-25135 Revision E:1984 INSPECTION MATERIALS, PENETRANTS
SAE MS 1009 : 2012 LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE P PNEUMATIC TOOL OILS - SPECIFICATION
MS 1011 : 2013(s2018) LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS - TYPE X (GREASES) - SPECIFICATION
ASTM D 6733 : 2001 : R2006 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography
ASTM D 6200 : 2001 : R2012 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
SAE MS 1001 : 2017 LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE A LUBRICANT FOR GENERAL PURPOSE AND TOTAL LOSS SYSTEMS - SPECIFICATION
ASTM D 6469 : 2017 : REDLINE Standard Guide for Microbial Contamination in Fuels and Fuel Systems
ASTM D 6730 : 2001 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100-Metre Capillary (with Precolumn) High-Resolution Gas Chromatography
ASTM D 6200 : 2001 : R2017 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D 6729 : 2014 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100 Metre Capillary High Resolution Gas Chromatography
ASTM D 4860 : 2014 : R2019 Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating)
ASTM D 6469 : 2017 Standard Guide for Microbial Contamination in Fuels and Fuel Systems
ASTM D 4868 : 2017 Standard Test Method for Estimation of Net and Gross Heat of Combustion of Hydrocarbon Burner and Diesel Fuels
ASTM D 6201 : 2018 : REV A Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation
ASTM D 6730 : 2001 : R2011 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100–Metre Capillary (with Precolumn) High-Resolution Gas Chromatography
BS 2869:1998 Specification for fuel oils for agricultural, domestic and industrial engines and boilers

View more information
$122.77
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more