![header thumbnail](/images/publishers\astm_cover.gif)
ASTM D 2559 : 2012 : REV A : R2018
Current
The latest, up-to-date edition.
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions
Hardcopy , PDF
English
01-08-2018
1.1This test method covers the determination of the oil absorption number of carbon black. 1.2The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. 1.1This specification covers adhesives suitable for the bonding of wood, including treated wood, into structural wood products for general construction or other uses where a high-strength, durable adhesive bond is required.1.2This specification includes test methods that may be referenced by specific product standards for the evaluation and approval of structural wood adhesives. Methods are included to evaluate adhesives intended for use in exterior exposure. NOTE 1:Consult the Commentary inAppendix X1regarding the intent and limitations of each test method contained in this specification.1.3Description of Bondline Performance—It is recognized that structural wood adhesives are used in various applications and levels of severity in terms of moisture content, loading, cyclic and seasonal weather conditions, heat exposure and other use conditions. It is the intent of this standard to determine the suitability of an adhesive for use under various levels of severity and conditions with specific and appropriate test methods and requirements. NOTE 2:This specification does not contain specific tests outlined for different chemical types of adhesives. 1.4Strength and durability requirements of the adhesive are based on the performance of the adhesive in laminated wood as measured by: 1.4.1Resistance to shear by compression loading after conditioning to the target moisture content indicated in14.2.3and meeting requirements in14.4. 1.4.2Resistance to delamination during exposure to three cycles of vacuum pressure wetting followed by drying at elevated temperature as indicated in15.3and meeting requirements in15.4. 1.4.3Resistance to creep under static load by subjecting test specimens to a specified shear stress and exposing one set of test specimens to an environment of elevated temperature and ambient humidity and another set to an environment of high humidity and meeting requirements set forth in16.3. 1.4.4For applications involving chemical treatment, the adhesive shall be evaluated using representative samples of treated wood. NOTE 3:When using chemically treated wood, compatibility between the treatment, adhesive, and wood is to be considered and agreed upon between the chemical manufacture and the user. NOTE 4:Additional durability testing may also be required as specified by individual product standards. Consult the Commentary inAppendix X1for additional information and guidance as to the type of durability testing that may be appropriate to supplement this specification when characterizing the adhesive for suitability with specific wood products. 1.5The evaluation of adhesives for use in ground contact and marine exposures are beyond the scope of this specification. 1.6The evaluation of binder adhesives is beyond the scope of this specification. 1.7The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only. 1.8The text of this specification references notes, footnotes and a commentary which provide explanatory material. These notes, footnotes and commentary (excluding those in tables and figures) shall not be considered as requirements of the specification. 1.9This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.10This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
1.1This specification covers adhesives suitable for the bonding of wood, including treated wood, into structural wood products for general construction or other uses where a high-strength, durable adhesive bond is required.
1.2This specification includes test methods that may be referenced by specific product standards for the evaluation and approval of structural wood adhesives. Methods are included to evaluate adhesives intended for use in exterior exposure.
Note 1:Consult the Commentary in Appendix X1 regarding the intent and limitations of each test method contained in this specification.
1.3Description of Bondline Performance—It is recognized that structural wood adhesives are used in various applications and levels of severity in terms of moisture content, loading, cyclic and seasonal weather conditions, heat exposure and other use conditions. It is the intent of this standard to determine the suitability of an adhesive for use under various levels of severity and conditions with specific and appropriate test methods and requirements.
Note 2:This specification does not contain specific tests outlined for different chemical types of adhesives.
1.4Strength and durability requirements of the adhesive are based on the performance of the adhesive in laminated wood as measured by:
1.4.1Resistance to shear by compression loading after conditioning to the target moisture content indicated in 14.2.3 and meeting requirements in 14.4.
1.4.2Resistance to delamination during exposure to three cycles of vacuum pressure wetting followed by drying at elevated temperature as indicated in 15.3 and meeting requirements in 15.4.
1.4.3Resistance to creep under static load by subjecting test specimens to a specified shear stress and exposing one set of test specimens to an environment of elevated temperature and ambient humidity and another set to an environment of high humidity and meeting requirements set forth in 16.3.
1.4.4For applications involving chemical treatment, the adhesive shall be evaluated using representative samples of treated wood.
Note 3:When using chemically treated wood, compatibility between the treatment, adhesive, and wood is to be considered and agreed upon between the chemical manufacture and the user.
Note 4:Additional durability testing may also be required as specified by individual product standards. Consult the Commentary in Appendix X1 for additional information and guidance as to the type of durability testing that may be appropriate to supplement this specification when characterizing the adhesive for suitability with specific wood products.
1.5The evaluation of adhesives for use in ground contact and marine exposures are beyond the scope of this specification.
1.6The evaluation of binder adhesives is beyond the scope of this specification.
1.7The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only.
1.8The text of this specification references notes, footnotes and a commentary which provide explanatory material. These notes, footnotes and commentary (excluding those in tables and figures) shall not be considered as requirements of the specification.
1.9This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.10This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Committee |
D 14
|
DocumentType |
Standard
|
Pages |
14
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
ASTM D 7770 : 2012 | Standard Test Method for Collection of Volatile Organic Compounds Emitted During Simulated Manufacturing of Engineered Wood Products Via a Sealed Caul Plate Method |
ASTM D 5574 : 1994 : R2012 | Standard Test Methods for Establishing Allowable Mechanical Properties of Wood-Bonding Adhesives for Design of Structural Joints |
ASTM D 5266 : 2013 | Standard Practice for Estimating the Percentage of Wood Failure in Adhesive Bonded Joints |
ASTM D 3535 : 2007 : REV A : R2013 | Standard Test Method for Resistance to Creep Under Static Loading for Structural Wood Laminating Adhesives Used Under Exterior Exposure Conditions |
ASTM D 7199 : 2007 : R2012 | Standard Practice for Establishing Characteristic Values for Reinforced Glued Laminated Timber (Glulam) Beams Using Mechanics-Based Models |
ASTM D 5055 : 2019 | Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
ASTM D 7966/D7966M : 2016 | Standard Test Method for Resistance to Creep of Adhesives in Static Shear by Compression Loading (Wood-to-Wood) |
ASTM D 4688/D4688M : 2014 | Standard Test Method for Evaluating Structural Adhesives for Finger Jointing Lumber |
ASTM D 5456 : 2019 | Standard Specification for Evaluation of Structural Composite Lumber Products |
ASTM D 7469 : 2016 | Standard Test Methods for End-Joints in Structural Wood Products |
ASTM D 1101 : 1997 : REV A : R2018 | Standard Test Methods for Integrity of Adhesive Joints in Structural Laminated Wood Products for Exterior Use |
ASTM D 1165 : 1980 : R1994 : EDT 1 | Standard Nonmenclature of Domestic Hardwoods and Softwoods (Withdrawn 2002) |
ASTM D 1165 : 2007 | Standard Nomenclature of Commercial Hardwoods and Softwoods |
ASTM D 9 : 2020 | Standard Terminology Relating to Wood and Wood-Based Products |
ASTM D 143 : 2022 | Standard Test Methods for Small Clear Specimens of Timber |
ASTM D 2555 : 2005 | Standard Practice for Establishing Clear Wood Strength Values |
ASTM D 5266 : 1999 | Standard Practice for Estimating the Percentage of Wood Failure in Adhesive Bonded Joints |
ASTM D 5055 : 2011 : REV A | Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
ASTM D 5055 : 2000 : REV A | Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
ASTM D 4442 : 2007 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials |
ASTM D 5456 : 2006 | Standard Specification for Evaluation of Structural Composite Lumber Products |
ASTM D 5055 : 2019 : EDT 1 | Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
ASTM D 5456 : 2014 : REV A | Standard Specification for Evaluation of Structural Composite Lumber Products |
ASTM D 5055 : 2005 | Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
ASTM D 5456 : 2005 : REV A | Standard Specification for Evaluation of Structural Composite Lumber Products |
ASTM D 5456 : 2014 : REV B | Standard Specification for Evaluation of Structural Composite Lumber Products |
ASTM D 2555 : 2006 | Standard Practice for Establishing Clear Wood Strength Values |
ASTM D 4300 : 2001 : R2013 | Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi |
ASTM D 143 : 2014 | Standard Test Methods for Small Clear Specimens of Timber |
ASTM D 5266 : 2013 | Standard Practice for Estimating the Percentage of Wood Failure in Adhesive Bonded Joints |
ASTM D 907 : 2015 | Standard Terminology of Adhesives |
ASTM D 4442 : 2015 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials |
ASTM D 2555 : 2017 | Standard Practice for Establishing Clear Wood Strength Values |
ASTM D 1583 : 2001 : R2018 | Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films |
ASTM E 6 : 2002 | Standard Terminology Relating to Methods of Mechanical Testing |
ASTM D 905 : 2008 : R2021 | Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading |
ASTM D 3535 : 2007 : REV A | Standard Test Method for Resistance to Creep Under Static Loading for Structural Wood Laminating Adhesives Used Under Exterior Exposure Conditions |
ASTM D 5055 : 2010 | Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
ASTM E 691 : 2020 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM D 2555 : 2017 : REV A : R2024 : EDT 1 | Standard Practice for Establishing Clear Wood Strength Values |
ASTM D 5456 : 2021 | Standard Specification for Evaluation of Structural Composite Lumber Products |
ASTM D 2555 : 2006 : R2011 | Standard Practice for Establishing Clear Wood Strength Values |
ASTM D 5266 : 2013 : R2020 | Standard Practice for Estimating the Percentage of Wood Failure in Adhesive Bonded Joints |
ASTM D 905 : 2008 : R2013 | Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading |
ASTM D 5456 : 2012 | Standard Specification for Evaluation of Structural Composite Lumber Products |
ASTM D 5456 : 2014 | Standard Specification for Evaluation of Structural Composite Lumber Products |
ASTM D 1583 : 2000 | Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films |
ASTM D 5055 : 2011 | Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
ASTM D 4300 : 2023 | Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi |
ASTM D 5456 : 2017 : EDT 1 | Standard Specification for Evaluation of Structural Composite Lumber Products |
ASTM E 691 : 2019 : EDT 1 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM D 4300 : 2001 | Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi |
ASTM D 4442 : 2016 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials |
ASTM D 143 : 2023 | Standard Test Methods for Small Clear Specimens of Timber |
ASTM E 691 : 2023 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM D 5456 : 2008 | Standard Specification for Evaluation of Structural Composite Lumber Products |
ASTM D 1165 : 2018 | Standard Nomenclature of Commercial Hardwoods and Softwoods |
ASTM D 3535 : 2007 : REV A : R2013 | Standard Test Method for Resistance to Creep Under Static Loading for Structural Wood Laminating Adhesives Used Under Exterior Exposure Conditions |
ASTM D 5456 : 2017 | Standard Specification for Evaluation of Structural Composite Lumber Products |
ASTM D 907 : 2015 : R2023 | Standard Terminology of Adhesives |
ASTM D 1165 : 2023 | Standard Nomenclature of Commercial Hardwoods and Softwoods |
ASTM D 1583 : 2001 : R2013 | Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films |
ASTM E 691 : 2022 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM D 5456 : 2005 | Standard Specification for Evaluation of Structural Composite Lumber Products |
ASTM D 4300 : 1998 : REV A | Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi |
ASTM D 3535 : 2007 | Standard Test Method for Resistance to Creep Under Static Loading for Structural Wood Laminating Adhesives Used Under Exterior Exposure Conditions |
ASTM D 5055 : 2019 | Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
ASTM D 1583 : 2001 | Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films |
ASTM D 5456 : 2011 | Standard Specification for Evaluation of Structural Composite Lumber Products |
ASTM D 5456 : 2010 : REV A | Standard Specification for Evaluation of Structural Composite Lumber Products |
ASTM E 691 : 2009 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM D 1583 : 2001 : R2008 | Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films |
ASTM D 5055 : 2013 : EDT 1 | Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
ASTM D 4442 : 2020 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials |
ASTM E 6 : 2015 : EDT 3 | Standard Terminology Relating to Methods of Mechanical Testing |
ASTM D 2555 : 2017 : REV A | Standard Practice for Establishing Clear Wood Strength Values |
ASTM D 5055 : 2002 | Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
ASTM E 6 : 2023 : REV A | Standard Terminology Relating to Methods of Mechanical Testing |
ASTM D 5055 : 2013 | Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
ASTM D 5456 : 2009 : REV A | Standard Specification for Evaluation of Structural Composite Lumber Products |
ASTM E 691 : 2021 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM D 5055 : 2008 : REV A | Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
ASTM D 5456 : 2001 | Standard Specification for Evaluation of Structural Composite Lumber Products |
ASTM D 5456 : 1999 : REV A | Standard Specification for Evaluation of Structural Composite Lumber Products |
ASTM D 905 : 1998 | Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading |
ASTM D 5456 : 2021 : EDT 1 | Standard Specification for Evaluation of Structural Composite Lumber Products |
ASTM D 4300 : 2001 : R2021 : EDT 1 | Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi |
ASTM D 2555 : 2005 : REV A | Standard Practice for Establishing Clear Wood Strength Values |
ASTM D 5055 : 2003 | Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
ASTM D 5055 : 2008 : REV A : EDT 1 | Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
ASTM D 2555 : 1998 | Standard Test Methods for Establishing Clear Wood Strength Values |
ASTM D 5456 : 2013 : REV A | Standard Specification for Evaluation of Structural Composite Lumber Products |
ASTM D 143 : 2021 | Standard Test Methods for Small Clear Specimens of Timber |
ASTM D 4300 : 2001 : R2008 | Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi |
ASTM D 5456 : 2009 | Standard Specification for Evaluation of Structural Composite Lumber Products |
ASTM E 6 : 2015 : EDT 4 : REDLINE | Standard Terminology Relating to Methods of Mechanical Testing |
ASTM D 5055 : 2008 | Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
ASTM D 5456 : 2019 : EDT 1 | Standard Specification for Evaluation of Structural Composite Lumber Products |
ASTM D 5456 : 2003 | Standard Specification for Evaluation of Structural Composite Lumber Products |
ASTM D 5456 : 2019 | Standard Specification for Evaluation of Structural Composite Lumber Products |
ASTM D 5456 : 2001 : REV A : EDT 1 | Standard Specification for Evaluation of Structural Composite Lumber Products |
ASTM D 1165 : 2003 | Standard Nonmenclature of Domestic Hardwoods and Softwoods |
ASTM D 5456 : 2007 | Standard Specification for Evaluation of Structural Composite Lumber Products |
ASTM D 3535 : 2000 | Standard Test Method for Resistance to Deformation Under Static Loading for Structural Wood Laminating Adhesives Used Under Exterior (Wet Use) Exposure Conditions |
ASTM D 2555 : 2017 : REV A : R2024 | Standard Practice for Establishing Clear Wood Strength Values |
ASTM D 2555 : 1998 : EDT 1 | Standard Test Methods for Establishing Clear Wood Strength Values |
ASTM D 5456 : 2010 | Standard Specification for Evaluation of Structural Composite Lumber Products |
ASTM D 1165 : 2013 | Standard Nomenclature of Commercial Hardwoods and Softwoods |
ASTM D 5055 : 2016 | Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
ASTM D 5055 : 2004 | Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
ASTM E 6 : 2015 : EDT 4 | Standard Terminology Relating to Methods of Mechanical Testing |
ASTM D 5055 : 2009 | Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
ASTM D 5456 : 2001 : REV A | Standard Specification for Evaluation of Structural Composite Lumber Products |
ASTM E 6 : 2023 | Standard Terminology Relating to Methods of Mechanical Testing |
ASTM D 3535 : 2007 : REV A : R2021 | Standard Test Method for Resistance to Creep Under Static Loading for Structural Wood Laminating Adhesives Used Under Exterior Exposure Conditions |
ASTM D 5456 : 2013 | Standard Specification for Evaluation of Structural Composite Lumber Products |
ASTM D 2555 : 2015 | Standard Practice for Establishing Clear Wood Strength Values |
ASTM D 5456 : 2011 : REV A | Standard Specification for Evaluation of Structural Composite Lumber Products |
ASTM D 4442 : 1992 : R1997 : EDT 1 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials |
ASTM D 4442 : 1984 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials |
ASTM D 5456 : 2018 | Standard Specification for Evaluation of Structural Composite Lumber Products |
ASTM D 5055 : 2012 | Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
ASTM D 4442 : 1992 : R2003 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials |
ASTM D 2555 : 2016 | Standard Practice for Establishing Clear Wood Strength Values |
ASTM D 5055 : 2007 | Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.