ASTM D 7060 : 2012 : R2014
|
Standard Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)
|
ASTM D 8001 : 2016 : EDT 1
|
Standard Test Method for Determination of Total Nitrogen, Total Kjeldahl Nitrogen by Calculation, and Total Phosphorus in Water, Wastewater by Ion Chromatography
|
ASTM D 3237 : 2017
|
Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
|
ASTM D 6375 : 2009 : R2014
|
Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
|
ASTM D 7591 : 2012 : R2017
|
Standard Test Method for Determination of Free and Total Glycerin in Biodiesel Blends by Anion Exchange Chromatography
|
ASTM D 7372 : 2017
|
Standard Guide for Analysis and Interpretation of Proficiency Test Program Results
|
ASTM D 8071 : 2017
|
Standard Test Method for Determination of Hydrocarbon Group Types and Select Hydrocarbon and Oxygenate Compounds in Automotive Spark-Ignition Engine Fuel Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)
|
ASTM D 7751 : 2016
|
Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis
|
ASTM D 7622 : 2010 : R2015
|
Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction
|
ASTM D 1266 : 2018
|
Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
|
ASTM D 482 : 2013
|
Standard Test Method for Ash from Petroleum Products
|
ASTM D 1552 : 2016 : EDT 1
|
Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD)
|
ASTM D 7111 : 2016
|
Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
|
ASTM D 7961 : 2017
|
Standard Practice for Calibrating U-tube Density Cells over Large Ranges of Temperature and Pressure
|
ASTM D 8149 : 2017
|
Standard Practice for Optimization, Calibration, and Validation of Ion Chromatographic Determination of Heteroatoms and Anions in Petroleum Products and Lubricants
|
ASTM D 3831 : 2012 : R2017
|
Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy
|
ASTM D 7279 : 2018
|
Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
|
ASTM D 7328 : 2017
|
Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection
|
ASTM D 8056 : 2018
|
Standard Guide for Elemental Analysis of Crude Oil
|
ASTM D 94 : 2007 : R2017
|
Standard Test Methods for Saponification Number of Petroleum Products
|
ASTM D 8146 : 2018
|
Standard Guide for Evaluating Test Method Capability and Fitness for Use
|
ASTM D 7040 : 2004 : R2015
|
Standard Test Method for Determination of Low Levels of Phosphorus in ILSAC GF 4 and Similar Grade Engine Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
|
ASTM D 8267 : 2019
|
Standard Test Method for Determination of Saturated Hydrocarbon, Aromatic, and Diaromatic Content of Aviation Turbine Fuels Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)
|
ASTM D 4323 : 2015
|
Standard Test Method for Hydrogen Sulfide in the Atmosphere by Rate of Change of Reflectance
|
ASTM D 3348 : 2012 : R2017
|
Standard Test Method for Rapid Field Test for Trace Lead in Unleaded Gasoline (Colorimetric Method) (Withdrawn 2022)
|
ASTM D 5059 : 2014 : R2019
|
Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy
|
ASTM D 7260 : 2019
|
Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants
|
ASTM D 7778 : 2015
|
Standard Guide for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
|
ASTM D 5501 : 2012 : R2016
|
Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20% Ethanol by Gas Chromatography
|
ASTM D 7578 : 2018
|
Standard Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants
|
ASTM D 7740 : 2011 : R2016
|
Standard Practice for Optimization, Calibration, and Validation of Atomic Absorption Spectrometry for Metal Analysis of Petroleum Products and Lubricants
|
ASTM D 7303 : 2017
|
Standard Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry
|
ASTM D 7319 : 2017
|
Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography
|
ASTM D 5184 : 2012 : R2017
|
Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
|
ASTM D 7876 : 2013 : R2018
|
Standard Practice for Practice for Sample Decomposition Using Microwave Heating (With or Without Prior Ashing) for Atomic Spectroscopic Elemental Determination in Petroleum Products and Lubricants
|
ASTM D 7620 : 2010 : R2015
|
Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection
|
ASTM D 7623 : 2010 : R2015
|
Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method
|
ASTM D 7483 : 2013 : REV A : R2017
|
Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
|