Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM E 11 : 2017 : REDLINE

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves
Available format(s)

PDF

Superseded date

05-08-2020

Language(s)

English

Published date

01-04-2017

CONTAINED IN VOL. 14.02, 2017 Describes the technical requirements for; the woven wire test sieve cloth (sieve cloth) used in test sieves, the construction of test sieves, standard and non-standard test sieve frame sizes, and test procedures used to inspect sieve cloth and the test sieves.

1.1This document specifies the technical requirements for; the woven wire test sieve cloth (sieve cloth) used in test sieves, the construction of test sieves, standard and non-standard test sieve frame sizes, and test procedures used to inspect sieve cloth and the test sieves. This specification applies to test sieves manufactured with sieve cloth having a nominal aperture size ranging from 125 millimetres (mm) down to 20 micrometres (μm).

1.2Additional reference information can be found in Specifications E161, E323, E2016, and in Test Methods C430 and E2427.

1.3The values stated in SI units shall be considered standard for the dimensions of the sieve cloth openings and the wire diameters used in the sieve cloth. The values stated in inch-pound units shall be considered standard with regard to the sieve frames, pans, and covers.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
E 29
DevelopmentNote
Supersedes ASTM E 17. (03/2002) Supersedes RR S 366 (E). (09/2004)
DocumentType
Redline
Pages
22
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM C 24 : 2009 : R2013 Standard Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High Alumina Refractory Materials
SAE AMS 3044G : 2014 MAGNETIC PARTICLES, FLUORESCENT, WET METHOD, DRY POWDER
ASTM D 2901 : 1999 Standard Test Method for Cement Content of Freshly Mixed Soil-Cement (Withdrawn 2006)
ASTM D 3744 : 2003 Standard Test Method for Aggregate Durability Index
ASTM D 4930 : 2006 : R2011 Standard Test Method for Dust Control Material on Calcined Petroleum Coke
ASTM D 409/D409M : 2016 : REDLINE Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method
ASTM F 106 : 2012 Standard Specification for Brazing Filler Metals for Electron Devices
ASTM D 5158 : 1998 Standard Test Method for Determination of the Particle Size of Powdered Activated Carbon by Air Jet Sieving
ASTM C 92 : 1995 TEST METHODS FOR SIEVE ANALYSIS AND WATER CONTENT OF REFRACTORY MATERIALS
DIN 69176-2:1985-03 GRAINS OF FUSED ALUMINIUM OXIDE AND SILICON CARBIDE FOR COATED ABRASIVES; METHOD OF TEST OF MACROGRITS, GRIT P12 TO P220
ASTM C 1120 : 1998 : R2002 Standard Test Method for Wash Test of Asbestos
ASTM A 922 : 2005 : R2010 Standard Specification for Silicon Metal
ASTM E 828 : 1981 : R2004 : EDT 1 Standard Test Method for Designating the Size of RDF-3 From its Sieve Analysis (Withdrawn 2009)
ASTM E 956 : 1983 : R2015 Standard Classification for Municipal-Mixed Nonferrous Metals (MNM)
ASTM D 1155 : 2010 Standard Test Method for Roundness of Glass Spheres
DOD-P-51455 Base Document:1979 POTASSIUM CARBONATE, ANHYDROUS, TECHNICAL (METRIC)
MIL STD 1427 : A NOTICE 1 ACTIVATED DESICCANTS (METRIC)
MIL-STD-1442 Revision A:1994 INORGANIC PEROXIDES, TECHNICAL GRADE
MIL-C-0051096 Revision E:1983 CORE MATERIAL, C18
ASTM A 481 : 2005 : R2015 Standard Specification for Chromium Metal
ASTM A 922 : 2005 : R2015 Standard Specification for Silicon Metal
ASTM D 297 : 2015 : REDLINE Standard Test Methods for Rubber Products—Chemical Analysis
ASTM E 956 : 1983 : R2010 Standard Classification for Municipal-Mixed Nonferrous Metals (MNM)
CGSB 8.1 : 1988 SIEVES, TESTING, WOVEN WIRE, INCH SERIES
ASTM E 102 : 1993 : R2003 : EDT 1 Standard Test Method for Saybolt Furol Viscosity of Bituminous Materials at High Temperatures
ASTM D 3880 : 1990 : R2004 Standard Test Method for Asbestos Strength Units
ASTM C 458 : 1998 : R2002 Standard Test Method for Organic Fiber Content of Asbestos-Cement Products
ASTM D 1514 : 2015 : REDLINE Standard Test Method for Carbon Black—Sieve Residue
DIN 69101-2:1985-12 GRAINS OF FUSED ALUMINIUM OXIDE AND SILICON CARBIDE FOR BONDED ABRASIVE PRODUCTS AND CHIP REMOVAL OPERATIONS WITH LOOSE ABRASIVE GRAINS; METHOD OF TEST OF MACROGRITS F4 TO F220
ASTM A 749/A749M : 2014 : REDLINE Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for
ASTM D 6913 : 2004 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
MIL-STD-1214 Revision A:1990 ESTERS AND METAL ORGANICS, TECHNICAL GRADE
DOD STD 1445 : 1994-09-21 METAL ORGANIC COMPOUNDS, TECHNICAL GRADE (METRIC)
ASTM D 422 : 1963 : R2002 Standard Test Method for Particle-Size Analysis of Soils
ASTM C 92 : 1995 : R2005 Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials
API 10 : 1990 SPECIFICATION FOR MATERIALS AND TESTING FOR WELL CEMENTS
ASTM D 4616 : 1995 : R2013 Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch
MIL L 12039 : D LITHIUM HYDRIDE, TECHNICAL (METRIC)
ASTM C 472 : 1999 : R2014 Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete
DOD-D-51524 Base Document:1986 DYE, DISPERSE BLUE 3 (METRIC)
MIL-STD-1203 Revision B:1991 INORGANIC SALTS AND COMPOUNDS, TECHNICAL GRADE (ALUMINUM CHLORIDE THROUGH BORON NITRIDE)
ASTM D 6998 : 2011 : REDLINE Standard Practice for Evaluating Aggregate Coating using Emulsified Asphalts
ASTM C 285 : 2010. Standard Test Methods for Sieve Analysis of Wet-Milled and Dry-Milled Porcelain Enamel
ASTM D 1457 : 1992 Specification for Polytetrafluorethylene (PTFE) Molding and Extrusion Materials (Withdrawn 1996)
AWWA B503 : 2017 SODIUM TRIPOLYPHOSPHATE
FM 2000 : 2018 AUTOMATIC SPRINKLERS FOR FIRE PROTECTION
ASTM E 688 : 1994 : R2011 Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing (Withdrawn 2019)
MIL-DTL-51027 Revision B:2010 ANTISETTING COMPOUND, DECONTAMINATING SLURRY, M2
ASTM F 1377 : 2013 : REDLINE Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Coating of Orthopedic Implants (UNS R30075)
ASTM D 7521 : 2016 : REDLINE Standard Test Method for Determination of Asbestos in Soil
API 10A : 2011 SPECIFICATION FOR CEMENTS AND MATERIALS FOR WELL CEMENTING
ASTM D 4026 : 2006 : R2012 Standard Test Method for Rubber Latex—Styrene-Butadiene Copolymer—Determination of Residual Styrene
TAPPI T 257 : 2014 SAMPLING AND PREPARING WOOD FOR ANALYSIS
16/30338304 DC : 0 BS ISO/ASTM 52903-1 - ADDITIVE MANUFACTURING - STANDARD SPECIFICATION FOR MATERIAL EXTRUSION BASED ADDITIVE MANUFACTURING OF PLASTIC MATERIALS - PART 1: FEEDSTOCK MATERIALS
MIL-P-14536 Base Document:1957 Polyisobutylene Binder
MIL-STD-1443 Revision A:1994 INORGANIC ACIDS AND ACID ANHYDRIDES, REAGENT GRADE (INCLUDING ACS AND USP-NF COMPOUNDS)
ASTM D 2868 : 2010 Standard Test Method for Nitrogen Content (Kjeldahl) and Hide Substance Content of Leather
MIL-STD-612 Revision C:1993 INORGANIC BASES AND BASIC ANHYDRIDES, TECHNICAL GRADE (METRIC)
MIL-STD-1209 Revision B:1993 INORGANIC SALTS AND COMPOUNDS TECHNICAL GRADE (STRONTIUM NITRATE THROUGH ZINC OXIDE)
API 56 : 1995 RECOMMENDED PRACTICES FOR TESTING SAND USED IN HYDRAULIC FRACTURING OPERATIONS
ASTM C 329 : 1988 : R2006 Standard Test Method for Specific Gravity of Fired Ceramic Whiteware Materials
ASTM D 6997 : 2012 : REDLINE Standard Test Method for Distillation of Emulsified Asphalt
ASTM D 3997/D3997M : 2016 : REDLINE Standard Practice for Preparing Coke Samples for Microscopical Analysis by Reflected Light
ASTM C 190 : 1985 Method of Test for Tensile Strength of Hydraulic Cement Mortars (Withdrawn 1990)
ASTM D 2860/D2860M : 2004 : R2010 Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90&#176 Angle and Constant Stress
ASTM F 735 : 2017 : REDLINE Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method
ASTM C 59/C59M : 2000 : R2006 Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster
ASTM D 1139/D1139M : 2015 : REDLINE Standard Specification for Aggregate for Single or Multiple Bituminous Surface Treatments
MIL-STD-605 Revision B:1994 INORGANIC ACIDS AND ACID ANHYDRIDES, TECHNICAL GRADE
ASTM D 5709 : 2009 Standard Test Method for Sieve Analysis of Petroleum Coke
ASTM D 1632 : 2017 Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory
MIL C 17605 : C CHARCOAL, ACTIVATED, UNIMPREGNATED
ASTM C 136/C136M : 2014 : REDLINE Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
ASTM E 1757 : 2001 : R2007 Standard Practice for Preparation of Biomass for Compositional Analysis
ASTM D 5493 : 2006 : R2016 Standard Test Method for Permittivity of Geotextiles Under Load
ASTM E 161 : 2017 : REDLINE Standard Specification for Electroformed Material and Test Sieves
AASHTO T 134 : 2005 METHOD OF TEST FOR MOISTURE-DENSITY RELATIONS OF SOIL-CEMENT MIXTURES
ASTM D 5080 : 2017 : REDLINE Standard Test Method for Rapid Determination of Percent Compaction
ASTM C 1797 : 2017 : REDLINE Standard Specification for Ground Calcium Carbonate and Aggregate Mineral Fillers for use in Hydraulic Cement Concrete
ASTM D 2764 : 1999 : R2015 : EDT 1 Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch
ASTM D 2638 : 2010 : R2015 : EDT 1 Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer
ASTM C 778 : 2017 : REDLINE Standard Specification for Standard Sand
MIL-S-14374 Revision C:1983 SILICA GEL, IRON FREE
ASTM D 5644 : 2001 : R2013 Standard Test Methods for Rubber Compounding Materials—Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
ASTM C 1121/C1121M : 2004 : R2009 : EDT 1 Standard Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos
MIL-S-82858 Base Document:1986 SILICONE DIOXIDE, MICROFINE
ASTM A 610 : 1979 : R2000 Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size
API 10A REDLINE : 2010 SPECIFICATION FOR CEMENTS AND MATERIALS FOR WELL CEMENTING
ASTM C 135 : 1996 : R2015 Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion
ASTM C 225 : 1985 : R2004 Standard Test Methods for Resistance of Glass Containers to Chemical Attack
ASTM C 146 : 1994 : REV A : R2014 Standard Test Methods for Chemical Analysis of Glass Sand
04/30110128 DC : 0 BS EN 14243 - POST-CONSUMER TYRE - MATERIALS AND APPLICATIONS
MIL-L-14519 Revision C:1978 LIMESTONE, PULVERIZED
API 5A3 REDLINE : 2009 RECOMMENDED PRACTICE ON THREAD COMPOUNDS FOR CASING, TUBING, LINE PIPE, AND DRILL STEM ELEMENTS
SAE J 444 : 2017 CAST SHOT AND GRIT SIZE SPECIFICATIONS FOR PEENING AND CLEANING
API 60 : 1995 RECOMMENDED PRACTICES FOR TESTING HIGH-STRENGTH PROPPANTS USED IN HYDRAULIC FRACTURING OPERATIONS
ASTM C 92 : 1995 : R2015 Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials
API 5A3 : 2011 RECOMMENDED PRACTICE ON THREAD COMPOUNDS FOR CASING, TUBING, LINE PIPE, AND DRILL STEM ELEMENTS
MIL-S-51078 Revision C:1984 SODIUM HEXAMETAPHOSPHATE, TECHNICAL
ASTM E 726 : 2001 : R2011 : EDT 1 Standard Test Method for Particle Size Distribution of Granular Carriers and Granular Pesticides
ASTM C 492 : 1992 : R2008 Standard Test Method for Hydration of Granular Dead-Burned Refractory Dolomite
ASTM C 172/C172M : 2017 : REDLINE Standard Practice for Sampling Freshly Mixed Concrete
ASTM D 3802 : 2016 : REDLINE Standard Test Method for Ball-Pan Hardness of Activated Carbon
SAE J 1830 : 2013 SIZE CLASSIFICATION AND CHARACTERISTICS OF CERAMIC SHOT FOR PEENING
ASTM C 1090/C1090M : 2015 : REDLINE Standard Test Method for Measuring Changes in Height of Cylindrical Specimens of Hydraulic-Cement Grout
ASTM D 6791 : 2011 : R2017 : EDT 1 Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke
ASTM C 61/C61M : 2000 : R2015 Standard Specification for Gypsum Keene's Cement
ASTM C 1093 : 2015-06 PRACTICE FOR ACCREDITATION OF TESTING AGENCIES FOR MASONRY
ASTM C 1124/C1124M : 1990 : R2015 Standard Test Method for Kerosene Retention of Asbestos (Withdrawn 2021)
ASTM D 1278 : 1991 : REV A : R2015 Standard Test Methods for Rubber from Natural Sources—Chemical Analysis
ASTM D 269 : 1997 Standard Test Method for Insoluble Matter in Rosin and Rosin Derivatives
ASTM C 574 : 1984 : R1988 Method for Chemical Analyisis of Magnesite and Dolomite Refractories
I.S. EN ISO 17824:2014 PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SAND SCREENS (ISO 17824:2009)
ASTM A 481 : 2005 : R2010 Standard Specification for Chromium Metal
ASTM C 441/C441M : 2017 : REDLINE Standard Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction
ASTM E 1520 : 1999 Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations
ASTM C 492 : 1992 : R1998 Standard Test Method for Hydration of Granular Dead-Burned Refractory Dolomite
ASTM D 4253 : 2016 : REDLINE Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table
ASTM D 6276 : 1999 : REV A Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization
ASTM D 1301 : 1991 : R2014 Standard Test Methods for Chemical Analysis of White Lead Pigments
ASTM D 4715 : 1998 : R2017 Standard Test Method for Coking Value of Tar and Pitch (Alcan)
ASTM D 4749 : 1987 : R2002 : EDT 1 Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size
ASTM D 7724 : 2011 Standard Test Method for Carbon Black<char: emdash>Non-Dispersible Matter by Mechanical Flushing (NDM)
ASTM D 546 : 2017 : REDLINE Standard Test Method for Sieve Analysis of Mineral Filler for Asphalt Paving Mixtures
ASTM D 4326 : 2013 : REDLINE Standard Test Method for Major and Minor Elements in Coal and Coke Ash By X-Ray Fluorescence
ASTM D 269 : 1997 : R2006 Standard Test Method for Insoluble Matter in Rosin and Rosin Derivatives
ASTM D 2977 : 2014 Standard Practice for Particle Size Range of Peat Materials for Horticultural Purposes
ASTM D 7655/D7655M : 2012 : R2017 Standard Classification for Size of Aggregate Used as Ballast for Membrane Roof Systems
AASHTO T 335 : 2009 METHOD OF TEST FOR DETERMINING THE PERCENTAGE OF FRACTURE IN COARSE AGGREGATE
ASTM D 854 : 2014 : REDLINE Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer (Withdrawn 2023)
ASTM D 4072 : 1998 : R2003 : EDT 1 Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch
ASTM C 888 : 2003 : R2014 Standard Specification for Nuclear-Grade Gadolinium Oxide (Gd<inf>2</inf>O<inf>3</inf >) Powder
ASTM C 786/C786M : 2017 : REDLINE Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-μm (No. 50), 150-μm (No. 100), and 75-μm (No. 200) Sieves by Wet Methods
AASHTO M 43 : 2005 : R2013 SPECIFICATION FOR SIZES OF AGGREGATE FOR ROAD AND BRIDGE CONSTRUCTION
ASTM F 1284 : 2009 : R2016 Standard Test Method for Evaluating Carpet Embedded Dirt Removal Effectiveness of Residential Central Vacuum Cleaning Systems
ASTM D 3089 : 1997 : R2008 Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes
ASTM F 3213 : 2017 Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion
ASTM D 2589/D2589M : 1988 : R2011 : EDT 1 Standard Test Method for McNett Wet Classification of Dual Asbestos Fiber
ASTM C 225 : 1985 : R2009 Standard Test Methods for Resistance of Glass Containers to Chemical Attack
ASTM D 6934 : 2008 : R2016 Standard Test Method for Residue by Evaporation of Emulsified Asphalt
ASTM D 441 : 2007 Standard Test Method of Tumbler Test for Coal
ASTM C 136 : 2006 Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
ASTM F 106 : 2012 : R2017 Standard Specification for Brazing Filler Metals for Electron Devices (Withdrawn 2024)
ASTM D 2752 : 1988 : R2002 Standard Test Methods for Air Permeability of Asbestos Fibers
ASTM D 7084 : 2004 : R2009 Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
ASTM D 244 : 2009 Standard Test Methods and Practices for Emulsified Asphalts
ASTM C 92 : 1995 : R1999 Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials
ASTM E 1520 : 1999 : R2004 Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations
ASTM C 429 : 2016 : REDLINE Standard Test Method for Sieve Analysis of Raw Materials for Glass Manufacture
ASTM D 1118 : 1995 : R2004 : EDT 2 Standard Test Method for Magnetic Rating of Asbestos Fiber and Asbestos Textiles
ASTM E 323 : 2011 Standard Specification for Perforated-Plate Sieves for Testing Purposes
ASTM C 1120 : 1998 Standard Test Method for Wash Test of Asbestos
ASTM D 716 : 1986 : R2003 Standard Test Methods for Evaluating Mica Pigment
ASTM D 1511 : 2012 Standard Test Method for Carbon Black—Pellet Size Distribution
ASTM F 1632 : 2003 : R2018 Standard Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes
ASTM D 718 : 1986 : R1999 Standard Test Methods for Analysis of Aluminum Silicate Pigment
ASTM A 132 : 2004 Standard Specification for Ferromolybdenum
ASTM D 3280 : 1985 : R1999 Standard Test Methods for Analysis of White Zinc Pigments
ASTM D 6934 : 2008 Standard Test Method for Residue by Evaporation of Emulsified Asphalt
ASTM B 851 : 2004 Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish
ASTM D 3977 : 1997 : R2002 Standard Test Methods for Determining Sediment Concentration in Water Samples
ASTM D 2320 : 1998 : R2017 Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
ASTM D 7280 : 2015 : REDLINE Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch by Stainless Steel Crucible Filtration
ASTM C 28/C28M : 2010 Standard Specification for Gypsum Plasters
ASTM D 2947/D2947M : 1988 : R2011 : EDT 1 Standard Test Method for Screen Analysis of Asbestos Fibers
ASTM D 293 : 1993 : R2010 Standard Test Method for the Sieve Analysis of Coke
ASTM A 610 : 1979 : R2004 Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size
ASTM D 7084:2004 Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
ASTM C 92 : 1995 : R2010 Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials
ASTM C 374 : 2014 : R2018 Standard Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods)
ASTM D 4570 : 2002 : R2007 Standard Test Method for Rubber Chemicals<span class='unicode'>—</span>Determination of Particle Size of Sulfur by Sieving (Dry)
ASTM D 1140 : 2017 : REDLINE Standard Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing
ASTM D 422 : 1963 : R1998 Standard Test Method for Particle-Size Analysis of Soils
ASTM D 2332 : 2013 : REDLINE Standard Practice for Analysis of Water-Formed Deposits by Wavelength-Dispersive X-Ray Fluorescence
ASTM D 6374 : 2012 Standard Test Method for Volatile Matter in Green Petroleum Coke Quartz Crucible Procedure
ASTM D 431 : 1984 Method for Designating the Size of Coal from its Sieve Analysis (Withdrawn 1988)
ASTM D 2067 : 1997 : R2003 Standard Test Method for Coarse Particles in Printing Ink Dispersions
ASTM D 4749 : 1987 Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size
ASTM D 4718/D4718M : 2015 : REDLINE Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles
ASTM D 2320 : 1998 : R2003 Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
ASTM E 2543 : 2008 : R2014 Standard Specification for Portable Air Heaters Used at Personnel Decontamination Stations and Shelters
ASTM D 3280 : 1985 : R2009 Standard Test Methods for Analysis of White Zinc Pigments
ASTM C 374 : 2014 : R2015 : EDT 1 Standard Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods)
ASTM D 5341 : 1999 : R2004 Standard Test Method for Measuring Coke Reactivity Index (CRI) and Coke Strength After Reaction (CSR)
ASTM D 425 : 2017 : REDLINE Standard Test Method for Centrifuge Moisture Equivalent of Soils
ASTM D 6926 : 2016 : REDLINE Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus
ASTM C 323 : 1956 : R2011 Standard Test Methods for Chemical Analysis of Ceramic Whiteware Clays
ASTM D 2489 : 2002 Standard Practice for Estimating Degree of Particle Coating of Bituminous-Aggregate Mixtures
ISO 20279:2005 Soil quality Extraction of thallium and determination by electrothermal atomic absorption spectrometry
ASTM D 269 : 1997 : R2002 Standard Test Method for Insoluble Matter in Rosin and Rosin Derivatives
ASTM D 8038 : 2016 Standard Practice for Reclamation of Recycled Aggregate Base (RAB) Material
ASTM C 786 : 1996 Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-&#181m (No. 50), 150-&#181m (No. 100), and 75-&#181m (No. 200) Sieves by Wet Methods
ASTM D 716 : 1986 : R1999 Standard Test Methods for Evaluating Mica Pigment
ASTM D 716 : 1986 : R2007 Standard Test Methods for Evaluating Mica Pigment
ASTM E 1520 : 1999 : R2015 Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations
ASTM C 641 : 2017 : REDLINE Standard Test Method for Iron Staining Materials in Lightweight Concrete Aggregates
ASTM D 2860/D2860M : 2004 Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90&#176 Angle and Constant Stress
ASTM C 135 : 1996 : R2009 : EDT 1 Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion
ASTM C 1152/C1152M : 2004 : R2012 : EDT 1 Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete
ASTM D 1283 : 2005 Standard Test Method for Alkali-Soluability of Wools
ASTM D 1865/D1865M : 2009 Standard Test Method for Hardness of Mineral Aggregate Used on Built-Up Roofs
ASTM A 601/A601M : 2010 : R2015 Standard Specification for Electrolytic Manganese Metal
ASTM C 1121 : 2004 Standard Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos
ASTM D 1370 : 2000 Standard Test Method for Contact Compatibility Between Asphaltic Materials (Oliensis Test)
ASTM D 4715 : 1998 : R2008 : EDT 1 Standard Test Method for Coking Value of Tar and Pitch (Alcan)
ASTM D 421 : 1985 : R2007 Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants (Withdrawn 2016)
ASTM D 6928 : 2017 : REDLINE Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
ASTM C 325 : 2007 : R2014 Standard Guide for Wet Sieve Analysis of Ceramic Whiteware Clays
ASTM E 324 : 2016 Standard Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals
ASTM D 5030 : 2004 Standard Test Method for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit
BS EN ISO 13500 : 2008 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUID MATERIALS - SPECIFICATIONS AND TESTS
DIN EN ISO 7711-3:2005-02 Dentistry - Diamond rotary instruments - Part 3: Grit sizes, designation and colour code (ISO 7711-3:2004)
DIN EN ISO 20568-2:2017-10 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20568-2:2017)
DEFSTAN 68-279/1(1996) : 1996 EXAMINATION OF ACTIVATED CARBON: TYPES 1101, 1121 AND 1142
ASME AG-1 : 2019 CODE ON NUCLEAR AIR AND GAS TREATMENT
O-F-371 Revision B:1979 FIRE EXTINGUISHING AGENT, SODIUM BICARBONATE, DRY CHEMICAL
ASHRAE 145.1 : 2015 LABORATORY TEST METHOD FOR ASSESSING THE PERFORMANCE OF GAS-PHASE AIR-CLEANING SYSTEMS: LOOSE GRANULAR MEDIA
ASME AG 1 : 2012 CODE ON NUCLEAR AIR AND GAS TREATMENT
NBR 15664-9 : 2001 ERRATA 2011 ORTHOPEDIC IMPLANTS - PRODUCT COATING - PART 9: SPECIFICATIONS FOR UNALLOYED TITANIUM AND TITANIUM 6-ALUMINIUN 4-VANADIUM ALLOY POWDERS
ASTM D 6276 : 1999 : REV A : R2006 Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization
ASTM D 1739 : 1998 : R2017 Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter)
ASTM C 61/C61M : 2000 : R2006 Standard Specification for Gypsum Keene's Cement
ASTM D 421 : 1985 : R2002 Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants
ASTM D 2947 : 1988 : R2002 : EDT 1 Standard Test Method for Screen Analysis of Asbestos Fibers
ASTM D 4931 : 2006 : R2011 Standard Test Method for Gross Moisture in Green Petroleum Coke
08/30166039 DC : DRAFT JUNE 2008 BS ISO 17824 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SAND-CONTROL SCREENS
ASTM D 4072 : 1998 : R2008 Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch
WW-L-2887 Base Document:1998 TUBE, PHENOLIC, POROUS RETAINER FOR USE IN INSTRUMENT BEARINGS
ASTM D 4026 : 2006 : R2017 Standard Test Method for Rubber Latex—Styrene-Butadiene Copolymer—Determination of Residual Styrene
ASTM D 718 : 1986 : R2003 Standard Test Methods for Analysis of Aluminum Silicate Pigment
I.S. EN ISO 12086-2:2006 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
ASTM D 2764 : 1999 Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch
ASTM C 1335 : 2012 : R2017 Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation
AASHTO T 30 : 2015 METHOD OF TEST FOR MECHANICAL ANALYSIS OF EXTRACTED AGGREGATE
ASTM D 5539 : 2014 : REDLINE SPECIFICATION FOR SEED STARTER MIX
ASTM C 458/C458M : 1998 : R2011 : EDT 1 Standard Test Method for Organic Fiber Content of Asbestos-Cement Products
MIL-STD-1206 Revision B:1993 INORGANIC SALTS AND COMPOUNDS, TECHNICAL GRADE (FERRIC CHLORIDE THROUGH LITHIUM TETRAFLUOROBORATE (METRIC)
MIL-C-11029 Revision D:1987 CITRIC ACID, TECHNICAL
ASTM E 1071 : 1985 : R1989 : EDT 1 Test Method for Determination of Reducibility of Iron Ores (Withdrawn 1995)
ASTM C 35 : 2001 : R2005 Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster
ASTM D 448 : 2012 : R2017 Standard Classification for Sizes of Aggregate for Road and Bridge Construction
ASTM D 1914 : 1995 : R2014 Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres
ASTM C 980 : 2017 : REDLINE Standard Specification for Industrial Chimney Lining Brick
MIL-DTL-512 Revision C:2001 Aluminum Powder, Flaked, Grained, and Atomized
MIL-STD-613 Base Document:1986 INORGANIC BASES AND BASIC ANHYDRIDES, REAGENT GRADE (INCLUDING ACS AND USP-NF COMPOUNDS)(METRIC)
MIL-P-50002 Revision B:1981 PHOSPHATE COATING COMPOUNDS, FOR PHOSPHATING FERROUS METALS
ASTM C 492 : 1992 : R2017 : EDT 1 Standard Test Method for Hydration of Granular Dead-Burned Refractory Dolomite
I.S. EN ISO 10426-1:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - CEMENTS AND MATERIALS FOR WELL CEMENTING - PART 1: SPECIFICATION (ISO 10426-1:2009)
ASTM A 482 : 2005 : R2010 Standard Specification for Ferrochrome-Silicon
ASTM C 472 : 1999 : R2009 Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete
ASTM C 342 : 1997 Standard Test Method for Potential Volume Change of Cement-Aggregate Combinations (Withdrawn 2001)
ASTM C 403/C403M : 2016 : REDLINE Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
MIL-A-82667 Revision A:1978 AMMONIUM PERCHLORATE, GENERAL SPECIFICATION FOR
MIL-P-62426 Base Document:1991 POWDER, CHROMIUM CARBIDE - NICKEL CHROMIUM ALLOY (METRIC)
MIL-S-15191 Revision C:1986 SILICA, DIATOMACEOUS, UNCALCINED
API 7A1 : 1992 RECOMMENDED PRACTICE FOR TESTING OF THREAD COMPOUND FOR ROTARY SHOULDERED CONNECTIONS
ASTM A 482/A482M : 2011 Standard Specification for Ferrochrome-Silicon
07/30147011 DC : 0 BS EN ISO 13678 - PETROLEUM AND NATURAL GAS INDUSTRIES - EVALUATION AND TESTING OF THREAD COMPOUNDS FOR USE WITH CASING, TUBING, LINE PIPE AND DRILL STEM ELEMENTS
ASTM D 88 : 2007 : R2013 Standard Test Method for Saybolt Viscosity
ASTM D 3977 : 1997 Standard Test Methods for Determining Sediment Concentration in Water Samples
AASHTO T 210 : 2015 METHOD OF TEST FOR AGGREGATE DURABILITY INDEX
ASTM D 934 : 2013 : REDLINE Standard Practices for Identification of Crystalline Compounds in Water-Formed Deposits By X-Ray Diffraction (Withdrawn 2022)
ASTM D 185 : 2007 : R2012 Standard Test Methods for Coarse Particles in Pigments
07/30148827 DC : 0 BS EN ISO 13500 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUID MATERIALS - SPECIFICATIONS AND TESTS
MIL D 12468 : C NOTICE 1 DECONTAMINATING AGENT, STB
DIN EN ISO 20568-2 E : 2017 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20568-2:2017)
ASTM A 99 : 2003 : R2014 Standard Specification for Ferromanganese
ASTM D 4607 : 2014 : REDLINE Standard Test Method for Determination of Iodine Number of Activated Carbon
ASTM D 5600 : 2017 : REDLINE Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM A 483 : 2004 : R2009 Standard Specification for Silicomanganese
ASTM D 440 : 2007 Standard Test Method of Drop Shatter Test for Coal
DOD D 51485 : A DYE, SOLVENT YELLOW 33 (METRIC)
ASTM C 750 : 2009 : R2014 Standard Specification for Nuclear-Grade Boron Carbide Powder
ASTM E 1757 : 2001 Standard Practice for Preparation of Biomass for Compositional Analysis
LLL-R-626 Revision D:1984 ROSINS: GUM, WOOD, AND TALL OIL
ASTM D 4644 : 2016 : REDLINE Standard Test Method for Slake Durability of Shales and Other Similar Weak Rocks
O-A-429 Revision D:1984 ALUMINUM SULFATE, TECHNICAL
BS ISO 17824 : 2009 PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SAND SCREENS
MIL-STD-3033 Base Document:2010 PARTICLE/SAND EROSION TESTING OF ROTOR BLADE PROTECTIVE MATERIALS
BS EN ISO 28460:2010 Petroleum and natural gas industries. Installation and equipment for liquefied natural gas. Ship-to-shore interface and port operations
MIL-DTL-11309 Revision J:2007 DISINFECTANT, FOOD SERVICE
ASTM D 5821 : 2013 : R2017 Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
ASTM D 6647 : 2001 : R2006 Standard Test Method for Determination of Acid Soluble Iron Via Atomic Absorption
ASTM D 658 : 1991 Standard Test Method for Abrasion Resistance of Organic Coatings by Air Blast Abrasive (Withdrawn 1996)
ASTM F 2107 : 2008 : R2015 Standard Guide for Construction and Maintenance of Skinned Areas on Baseball and Softball Fields
ASTM F 2107 : 2008 Standard Guide for Construction and Maintenance of Skinned Areas on Baseball and Softball Fields
DEFSTAN 68-133/2(1992) : INTERIM CARBON, ACTIVATED, IMPREGNATED ASC/TEDA, TYPE 1101
ASTM C 493 : 1998 Standard Test Method for Bulk Density and Porosity of Granular Refractory Materials by Mercury Displacement (Withdrawn 2002)
03/113392 DC : DRAFT SEP 2003 BS EN ISO 7711-3 - DENTISTRY - DIAMOND ROTARY INSTRUMENTS - PART 3 - GRIT SIZES, DESIGNATION AND COLOUR CODE
DOD-M-64040 Revision A:1986 METHYL DIPHENYLUREA
ASTM D 4315 : 1994 : R2012 Standard Test Methods for Rubber Compounding Material—Zinc Oxide
ASTM C 1121/C1121M : 2004 : R2015 Standard Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos (Withdrawn 2021)
MIL-PRF-12039 Revision D:1990 LITHIUM HYDRIDE, TECHNICAL (METRIC)
ASTM C 332 : 2017 : REDLINE Standard Specification for Lightweight Aggregates for Insulating Concrete
ASTM D 4616 : 1995 : R2008 Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch
ASTM D 5106 : 2015 : REDLINE Standard Specification for Steel Slag Aggregates for Bituminous Paving Mixtures
ASTM D 4513 : 2011 : R2017 Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving
MIL-C-324 Revision C:1983 CALCIUM SILICIDE, TECHNICAL
ASTM C 1120/C1120M : 1998 : R2011 : EDT 1 Standard Test Method for Wash Test of Asbestos
ASTM D 6376 : 2010 : R2017 : EDT 1 Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-ray Fluorescence Spectroscopy
MIL-D-3718 Revision C:1986 DYE MIX, DISPERSE RED 9 - DEXTRIN (METRIC)
ASTM D 451 : 1991 : R2002 Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products
ASTM D 2014 : 1997 Standard Test Method for Expansion or Contraction of Coal by the Sole-Heated Oven
API 19C : 2008 : R2016 MEASUREMENT OF PROPERTIES OF PROPPANTS USED IN HYDRAULIC FRACTURING AND GRAVEL-PACKING OPERATIONS
AWS A5.8/A5.8M : 2013 SPECIFICATION FOR FILLER METALS FOR BRAZING AND BRAZE WELDING
ASTM D 3397 : 1981 Method of Test for Triaxial Classification of Base Materials, S Oils and Soil (Withdrawn 1987)
ASTM D 5341 : 1999 Standard Test Method for Measuring Coke Reactivity Index (CRI) and Coke Strength After Reaction (CSR)
ASTM D 5449/D5449M : 2016 : REDLINE Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM D 4931 : 2006 : R2017 Standard Test Method for Gross Moisture in Green Petroleum Coke
ASTM D 3280 : 1985 : R2004e1 TEST METHODS FOR ANALYSIS OF WHITE ZINC PIGMENTS
ASTM D 559/D559M : 2015 Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures
ASTM A 483/A483M : 2010 : R2015 Standard Specification for Silicomanganese
CSA N288.3.2 : 1985 HIGH EFFICIENCY AIR CLEANING ASSEMBLIES FOR NORMAL OPERATION OF NUCLEAR FACILITIES
ASTM C 371 : 2009 : R2014 Standard Test Method for Wire-Cloth Sieve Analysis of Nonplastic Ceramic Powders
ASTM E 1757 : 2001 : R2015 Standard Practice for Preparation of Biomass for Compositional Analysis
AWWA C602 : 2017 CEMENT-MORTAR LINING OF WATER PIPELINES IN PLACE - 4 INCH (100 MM) AND LARGER
AWWA B603 : 2016 PERMANGANATES
AWWA B701 : 2011 SODIUM FLUORIDE
AWWA B600 : 2016 POWDERED ACTIVATED CARBON
FM 2030 : 2009 RESIDENTIAL AUTOMATIC SPRINKLERS FOR FIRE PROTECTION
ASTM D 345 : 2002 : R2010 Standard Test Method for Sampling and Testing Calcium Chloride for Roads and Structural Applications (Withdrawn 2019)
AASHTO T 136 : 2013 METHOD OF TEST FOR FREEZING-AND-THAWING TESTS OF COMPACTED SOIL-CEMENT MIXTURES
AASHTO T 197M/T 197 : 1900 METHOD OF TEST FOR TIME OF SETTING OF CONCRETE MIXTURES BY PENETRATION RESISTANCE
C22.1-15 PACKAGE Consists of C22.1-15, Canadian electrical code, part I (23rd edition), safety standard for electrical installations; C22.1HB-15, Canadian electrical code handbook - an explanation of rules of the Canadian electrical code, part I and the 2015 Electrical quick reference
ASTM D 4373 : 2014 : REDLINE Standard Test Method for Rapid Determination of Carbonate Content of Soils
ASTM D 2331 : 2008 Standard Practices for Preparation and Preliminary Testing of Water-Formed Deposits
ASTM D 1135 : 1986 : R2014 Standard Test Methods for Chemical Analysis of Blue Pigments
ASTM D 452 : 1991 : R2008 Standard Test Method for Sieve Analysis of Surfacing for Asphalt Roofing Products
ASTM C 357 : 2007 Standard Test Method for Bulk Density of Granular Refractory Materials
ASTM C 566 : 2013 : REDLINE TEST METHOD FOR TOTAL EVAPORABLE MOISTURE CONTENT OF AGGREGATE BY DRYING
ASTM C 225 : 1985 : R1999 Standard Test Methods for Resistance of Glass Containers to Chemical Attack
ASTM E 389 : 2013 : REDLINE Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Coarser for Metal-Bearing Ores and Related Materials
AASHTO T 327 : 2012 METHOD OF TEST FOR RESISTANCE OF COARSE AGGREGATE TO DEGRADATION BY ABRASION IN THE MICRO-DEVAL APPARATUS
AASHTO T 245 : 2015 METHOD OF TEST FOR RESISTANCE TO PLASTIC FLOW OF ASPHALT MIXTURES USING MARSHALL APPARATUS
AASHTO R 58 : 2011 PRACTICE FOR DRY PREPARATION OF DISTURBED SOIL AND SOIL-AGGREGATE SAMPLES FOR TEST
ASTM D 4715 : 1998 : R2012 Standard Test Method for Coking Value of Tar and Pitch (Alcan)
ASTM D 6913 : 2004 : R2009 : EDT 1 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM F 2924 : 2014 : REDLINE Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion
AASHTO T 72 : 2010 : R2015 METHOD OF TEST FOR SAYBOLT VISCOSITY
AASHTO T 72 : 2010 METHOD OF TEST FOR SAYBOLT VISCOSITY
AASHTO T 180 : 2015 METHOD OF TEST FOR MOISTURE-DENSITY RELATIONS OF SOILS USING A 4.54-KG (10-LB) RAMMER AND A 457-MM (18-IN.) DROP
ASTM D 4944 : 2018 : REDLINE Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester
ASTM D 4718 : 1987 : R2001 Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles
ASTM E 956 : 1983 : R1999 Standard Classification for Municipal-Mixed Nonferrous Metals (MNM)
ASTM D 1914 : 1995 : R1999 Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis Atmospheres
ASTM A 601 : 2005 : R2010 Standard Specification for Electrolytic Manganese Metal
ASTM D 5493 : 2006 Standard Test Method for Permittivity of Geotextiles Under Load
ASTM D 7084 : 2004 : R2017 Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
EN ISO 10426-1:2009/AC:2018 PETROLEUM AND NATURAL GAS INDUSTRIES - CEMENTS AND MATERIALS FOR WELL CEMENTING - PART 1: SPECIFICATION - TECHNICAL CORRIGENDUM 2 (ISO 10426-1:2009/COR 2:2012)
ASTM F 3056 : 2014 : EDT 1 Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion
ASTM D 4646 : 2016 : REDLINE Standard Test Method for 24-h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments
ASTM C 1524 :2002 Standard Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method)
ASTM D 1241 : 2015 : REDLINE Standard Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses
ASTM A 483/A483M : 2010 Standard Specification for Silicomanganese
ASTM D 2862 : 2016 : REDLINE Standard Test Method for Particle Size Distribution of Granular Activated Carbon
ASTM D 2861 : 1987 : R2009 Standard Test Methods for Flexible Composites of Copper Foil with Dielectric Film or Treated Fabrics
ASTM D 4718 : 1987 : R2007 Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles
ASTM D 2772 : 1990 : R1997 : EDT 1 Standard Test Method for Sieve Analysis of Electrical Grade Magnesium Oxide (Withdrawn 2003)
ASTM D 1557 : 2012 : EDT 1 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup> (2,700 kN-m/m<sup>3</sup>))
ASTM E 828 : 1981 : R1997 Standard Test Method for Designating the Size of RDF-3 From its Sieve Analysis
ASTM D 345 : 2002 Standard Test Method for Sampling and Testing Calcium Chloride for Roads and Structural Applications
ASTM D 1883 : 2016 : REDLINE Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils
ASTM D 7486 : 2014 : REDLINE Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
ASTM C 329 : 1988 : R2016 Standard Test Method for Specific Gravity of Fired Ceramic Whiteware Materials
ASTM C 1137 : 2005 Standard Test Method for Degradation of Fine Aggregate Due to Attrition (Withdrawn 2011)
ASTM D 2416 : 1984 : R2009 Standard Test Method for Coking Value of Tar and Pitch (Modified Conradson)
ASTM C 117 : 2017 : REDLINE Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing
ASTM A 835/A835M : 2010 Standard Specification for Sizes of Ferroalloys and Alloy Additives
ASTM D 4072 : 1998 : R2018 Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch
ASTM D 422 : 1963 : R2007 Standard Test Method for Particle-Size Analysis of Soils
ASTM D 1155 : 2010 : R2015 Standard Test Method for Roundness of Glass Spheres
ASTM D 1301 : 1991 : R2008 Standard Test Methods for Chemical Analysis of White Lead Pigments
ASTM D 4421 : 1994 : R1999 Standard Test Method for Volatile Matter in Petroleum Coke (Withdrawn 2004)
ASTM C 1065 : 2008 Standard Specification for Nuclear-Grade Zirconium Oxide Powder
ASTM D 2764 : 1999 : R2009 Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch
ASTM D 7724 : 2011 : R2016 Standard Test Method for Carbon Black—Non-Dispersible Matter by Mechanical Flushing (NDM)
ASTM D 1275 : 2015 Standard Test Method for Corrosive Sulfur in Electrical Insulating Liquids
ASTM C 706 : 2013 : REDLINE Standard Specification for Limestone for Animal Feed Use
ASTM B 851 : 2004 : R2009 Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish
ASTM D 88 : 2007 Standard Test Method for Saybolt Viscosity
ASTM C 35 : 2001 Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster
ASTM D 1511 : 2012 : R2017 Standard Test Method for Carbon Black—Pellet Size Distribution
ASTM C 1524 : 2002 : REV A Standard Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method)
ASTM D 4350 : 2016 : REDLINE Standard Test Method for Corrosivity Index of Plastics and Fillers
ASTM C 183/C183M : 2016 : REDLINE Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement
ASTM D 5294 : 1992 Standard Test Method for Determination of Beta Resins (BR) in Pitch (Withdrawn 1997
ASTM D 1118/D1118M : 1995 : R2017 Standard Test Method for Magnetic Rating of Asbestos Fiber and Asbestos Textiles (Withdrawn 2022)
I.S. EN ISO 20568-2:2017 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20568-2:2017)
ASTM D 126 : 1987 : R2006 Standard Test Methods for Analysis of Yellow, Orange, and Green Pigments Containing Lead Chromate and Chromium Oxide Green
ASTM D 126 : 1987 : R2012 Standard Test Methods for Analysis of Yellow, Orange, and Green Pigments Containing Lead Chromate and Chromium Oxide Green
ASTM F 3055 : 2014 Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion
ASTM C 1121 : 2004 : EDT 1 Standard Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos
ASTM F 3055 : 2014 : EDT 1 Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion
ASTM D 50 : 1990 : R2005 Standard Test Methods for Chemical Analysis of Yellow, Orange, Red, and Brown Pigments Containing Iron and Manganese
ASTM C 127 : 2015 : REDLINE Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate
ASTM D 5581 : 2007 Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen)
ASTM D 2416 : 1984 : R1999 Standard Test Method for Coking Value of Tar and Pitch (Modified Conradson)
ASTM D 2067 : 1997 : R2013 Standard Test Method for Coarse Particles in Printing Ink Dispersions
ASTM D 7454 : 2014-05 TEST METHOD FOR DETERMINATION OF VIBRATED BULK DENSITY OF CALCINED PETROLEUM COKE USING A SEMI-AUTOMATED APPARATUS
ASTM C 781 : 2008 Standard Practice for Testing Graphite and Boronated Graphite Materials for High-Temperature Gas-Cooled Nuclear Reactor Components
ASTM D 5644 : 2001 Standard Test Methods for Rubber Compounding Materials&#8212Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
ASTM D 5341 : 1999 : R2010 : EDT 1 Standard Test Method for Measuring Coke Reactivity Index (CRI) and Coke Strength After Reaction (CSR)
ASTM D 1370/D1370M : 2012 : R2016 Standard Test Method for Contact Compatibility Between Asphaltic Materials (Oliensis Test)
ASTM C 458 : 1998 : R2006 Standard Test Method for Organic Fiber Content of Asbestos-Cement Products
ASTM C 61/C61M : 2000 Standard Specification for Gypsum Keene's Cement
ASTM C 1124/C1124M : 1990 : R2009 : EDT 1 Standard Test Method for Kerosene Retention of Asbestos
ASTM E 688 : 1994 : R2006 Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing
ASTM C 279 : 2017 : REDLINE Standard Specification for Chemical-Resistant Masonry Units
ASTM D 345 : 2002 Side bearings of the freight wagon bogies. General specifications
ISO 13503-2:2006 Petroleum and natural gas industries — Completion fluids and materials — Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations
ISO 13678:2010 Petroleum and natural gas industries Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements
BS EN ISO 13501:2011 Petroleum and natural gas industries. Drilling fluids. Processing equipment evaluation
CSA B366.1 :2011 : INC : UPD 1 : 2014 SOLID-FUEL-FIRED CENTRAL HEATING APPLIANCES
CSA B366.1 : 2011 SOLID-FUEL-FIRED CENTRAL HEATING APPLIANCES
I.S. EN ISO 13500:2008 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUID MATERIALS - SPECIFICATIONS AND TESTS
C22.1HB-18 Canadian Electrical Code Handbook - An Explanation of the Rules of the Canadian Electrical Code, Part I
I.S. EN ISO 13501:2011 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - PROCESSING EQUIPMENT EVALUATION
UNI EN ISO 13501 : 2011 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - PROCESSING EQUIPMENT EVALUATION
ASME PV CODE 2C : 2017 BOILER AND PRESSURE VESSEL CODE - MATERIALS - SPECIFICATIONS FOR WELDING RODS, ELECTRODES, AND FILLER METALS
ASTM D 5268 : 2013 : REDLINE Standard Specification for Topsoil Used for Landscaping Purposes
DIN EN ISO 28460:2011-04 Petroleum and natural gas industries - Installation and equipment for liquefied natural gas - Ship-to-shore interface and port operations (ISO 28460:2010)
ASTM C 1120 : 1998 : R2002 : EDT 1 Standard Test Method for Wash Test of Asbestos
ASTM D 4930 : 2006 Standard Test Method for Dust Control Material on Calcined Petroleum Coke
ASTM D 5709 : 2009 : R2015 Standard Test Method for Sieve Analysis of Petroleum Coke
ASTM C 458 : 1998 Standard Test Method for Organic Fiber Content of Asbestos-Cement Products
ASTM D 4892 : 2014 : REDLINE TEST METHOD FOR DENSITY OF SOLID PITCH (HELIUM PYCNOMETER METHOD)
ASTM F 1877 : 2016 : REDLINE Standard Practice for Characterization of Particles
ASTM D 293 : 1993 : R1999 Standard Test Method for the Sieve Analysis of Coke
ASTM D 4616 : 1995 : R2005 Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch
ASTM D 197 : 1987 : R2007 Standard Test Method for Sampling and Fineness Test of Pulverized Coal
ASTM D 6791 : 2011 Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke
ASTM A 99 : 2003 : R2009 Standard Specification for Ferromanganese
ASTM D 4254 : 2016 : REDLINE Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density
ASTM D 1704M : 1995 Test Method for Determining the Amount of Particulate Matter in the Atmosphere by Measurement of the Light Absorbance of a Filtered Sample (Metric) (Withdrawn 1998)
O-S-635 Revision E:2007 SODIUM POLYPHOSPHATES, TECHNICAL
ASTM D 452 : 1991 : R2002 Standard Test Method for Sieve Analysis of Surfacing for Asphalt Roofing Products
API 13A : 2010 SPECIFICATION FOR DRILLING FLUIDS MATERIALS
ASTM D 3466 : 2006 : R2011 Standard Test Method for Ignition Temperature of Granular Activated Carbon
ASTM C 135 : 1996 : R2003 Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion
ASTM C 329 : 1988 : R2011 Standard Test Method for Specific Gravity of Fired Ceramic Whiteware Materials
NFPA 499 : 2017 CLASSIFICATION OF COMBUSTIBLE DUSTS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS
ASTM D 1997 : 2013 : REDLINE Standard Test Method for Laboratory Determination of the Fiber Content of Peat Samples by Dry Mass
ISO 10426-1:2009 Petroleum and natural gas industries Cements and materials for well cementing Part 1: Specification
ASTM C 573 : 1981 : R1990 Methods for Chemical Analysis of Fireclay and High-Alumina Refractories
ASTM D 502 : 1989 : R2009 Standard Test Method for Particle Size of Soaps and Other Detergents
ASTM A 100 : 2007 : R2012 Standard Specification for Ferrosilicon
ASTM B 851 : 2004 : R2014 Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish
ASTM D 1278 : 1991 : REV A : R2011 Standard Test Methods for Rubber from Natural Sources—Chemical Analysis
DIN 69176-1:1985-03 GRAINS OF FUSED ALUMINIUM OXIDE AND SILICON CARBIDE FOR COATED ABRASIVES; DESIGNATION, GRAIN SIZE DISTRIBUTION
MIL-C-768 Revision A:1990 COPPER, POWDERED (FOR USE IN AMMUNITION) (METRIC)
MIL F 82795 : NOTICE 1 FLOATS, PULP, ASBESTOS
MIL-DTL-150 Revision E:2008 POTASSIUM CHLORATE, TECHNICAL
ASTM D 1278 : 1991 : REV A : R2002 Standard Test Methods for Rubber from Natural Sources-Chemical Analysis
ASTM E 276 : 2013 : REDLINE Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Finer for Metal-Bearing Ores and Related Materials
ASTM D 4749 : 1987 : R2007 Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size
UFC 3-250-03 : 2001 UNIFIED FACILITIES CRITERIA - STANDARD PRACTICE MANUAL FOR FLEXIBLE PAVEMENTS
AWS TSS : 1985 THERMAL SPRAYING: PRACTICE, THEORY, AND APPLICATION
ASTM D 5159 : 2004 Standard Guide for Dusting Attrition of Granular Activated Carbon
ASTM A 100 : 2007 : R2018 Standard Specification for Ferrosilicon
ASTM D 4829 : 2011 : REDLINE Standard Test Method for Expansion Index of Soils
ASTM D 2067 :1997 Standard Test Method for Coarse Particles in Printing Ink Dispersions
ASTM D 4616 : 1995 : R2000 Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch
04/19987313 DC : DRAFT DEC 2004 BS ISO 13501 - PETROLEUM & NATURAL GAS INDUSTRIES - DRILLING FLUIDS - PROCESSING SYSTEMS EVALUATION
ASTM D 4312 : 2015 : REDLINE Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method)
ASTM D 6913/D6913M : 2017 : REDLINE Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM E 2316 : 2014 : REDLINE Standard Test Method for Determination of Particles Resulting from the Attrition of Granular Pesticides
ASTM D 2947 : 1988 : R2006 Standard Test Method for Screen Analysis of Asbestos Fibers
ASTM D 2489/D2489M : 2016 : REDLINE Standard Test Method for Estimating Degree of Particle Coating of Asphalt Mixtures
ASTM D 7928 : 2017 : REDLINE Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
ASTM A 99 : 2003 Standard Specification for Ferromanganese
ASTM C 1065 : 2008 : R2015 Standard Specification for Nuclear-Grade Zirconium Oxide Powder
ASTM D 6572 : 2014-02 TEST METHODS FOR DETERMINING DISPERSIVE CHARACTERISTICS OF CLAYEY SOILS BY THE CRUMB TEST
ASTM C 323 : 1956 : R2016 Standard Test Methods for Chemical Analysis of Ceramic Whiteware Clays (Withdrawn 2024)
ASTM D 2318 : 2015 : REDLINE Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch
ASTM D 1863/D1863M : 2005 : R2011 : EDT 1 Standard Specification for Mineral Aggregate Used on Built-Up Roofs
FM 5580 : 2012 HYBRID (WATER AND INERT GAS) FIRE EXTINGUISHING SYSTEMS
MIL P 211 : E PHOSPHORUS, RED, TECHNICAL
MIL-S-14022 Revision A:1983 SODIUM PERBORATE, TETRAHYDRATE
MIL-P-62423 Base Document:1982 POWDER, POLYESTER-ALUMINUM (METRIC)
ASTM D 126 : 1987 : R2019 Standard Test Methods for Analysis of Yellow, Orange, and Green Pigments Containing Lead Chromate and Chromium Oxide Green
ASTM D 126 : 1987 : R2002 Standard Test Methods for Analysis of Yellow, Orange, and Green Pigments Containing Lead Chromate and Chromium Oxide Green
ASTM D 8106 : 2017 Standard Test Methods for Determining the Oil Sorption Capacity of Organophilic Clay
ASTM D 1508 : 2012 Standard Test Method for Carbon Black, Pelleted Fines and Attrition
ASTM C 59/C59M : 2000 Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster
ASTM D 1278 : 1991 : REV A : R1997 : EDT 1 Standard Test Methods for Rubber from Natural Sources-Chemical Analysis
MIL-P-83348 Revision A:1983 POWDER, PLASMA SPRAY
MIL-P-85856 Base Document:1988 POWDER MATERIALS FOR FLAME AND PLASMA SPRAYED COATINGS GENERAL SPECIFICATION FOR
ASTM D 1665 : 1998 : R2009 Standard Test Method for Engler Specific Viscosity of Tar Products
ASTM C 1120 : 1998 : R2006 Standard Test Method for Wash Test of Asbestos
ASTM D 3155 : 2011 : REDLINE Standard Test Method for Lime Content of Uncured Soil-Lime Mixtures
ASTM C 325 : 2007 Standard Guide for Wet Sieve Analysis of Ceramic Whiteware Clays
ASTM D 3038 : 1993 : R1999 Standard Test Method for Drop Shatter Test for Coke
ASTM D 2416 : 1984 : R2015 : EDT 1 Standard Test Method for Coking Value of Tar and Pitch (Modified Conradson)
ASTM D 6936 : 2017 : REDLINE Standard Test Method for Determining Demulsibility of Emulsified Asphalt
MIL-P-62424 Base Document:1982 POWDER, YTTRIUM, ALUMINUM, NICKEL-CHROMIUM (METRIC)
O-C-828 Revision C:1980 CUPRIC SULFATE, PENTAHYDRATE, TECHNICAL
ASTM C 35 : 2001 : R2014 Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster
UNI EN ISO 28460 : 2011 PETROLEUM AND NATURAL GAS INDUSTRIES - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - SHIP-TO-SHORE INTERFACE AND PORT OPERATIONS
ASTM C 374 : 2014 Standard Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods)
MIL-L-16355 Revision E:1993 LEAD STYPHNATE, BASIC
MIL-DTL-757 Revision C:2012 Lead Styphnate, Normal
SAE J 3020 : 2014 MEDICAL DEVICE SHOT PEENING
AASHTO T 220 : 2006 METHOD OF TEST FOR DETERMINATION OF THE STRENGTH OF SOIL-LIME MIXTURES
ASTM C 1843 : 2016 Standard Test Method for Determining Moisture Content in Uranium-Ore Concentrate
ASTM D 718 : 1986 : R2014 Standard Test Methods for Analysis of Aluminum Silicate Pigment
ASTM C 535 : 2016 : REDLINE Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
ASTM D 2014 : 1997 : R2010 Standard Test Method for Expansion or Contraction of Coal by the Sole-Heated Oven
ASTM D 1664 : 1980 : R1985 Test Method for Coating and Stripping of Bitumen-Aggregate Mixtures (Withdrawn 1992)
ASTM D 3880/D3880M : 1990 : R2009 : EDT 1 Standard Test Method for Asbestos Strength Units
ASTM D 244 : 2009 : R2017 Standard Test Methods and Practices for Emulsified Asphalts
API 13A : 2010 : INC : ERR 1 : 2014 SPECIFICATION FOR DRILLING FLUIDS MATERIALS
AWWA B506 : 2013 ZINC ORTHOPHOSPHATE
ASTM D 3977 : 1997 : R2007 Standard Test Methods for Determining Sediment Concentration in Water Samples
ASTM D 4914/D4914M : 2016 : REDLINE Standard Test Methods for Density of Soil and Rock in Place by the Sand Replacement Method in a Test Pit
ASTM D 2416 : 1984 : R2004 Standard Test Method for Coking Value of Tar and Pitch (Modified Conradson)
ASTM D 6276 : 1999 : REV A : R2006 : EDT 1 Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization (Withdrawn 2015)
ASTM A 610 : 1979 : R2014 Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size
ACI 364.3R : 2009 GUIDE FOR CEMENTITIOUS REPAIR MATERIAL DATA SHEET
ASTM C 1318 : 2015-06 TEST METHOD FOR DETERMINATION OF TOTAL NEUTRALIZING CAPABILITY AND DISSOLVED CALCIUM AND MAGNESIUM OXIDE IN LIME FOR FLUE GAS DESULFURIZATION (FGD)
ASTM D 5581 : 2007 : REV A : EDT 1 Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen)
ASTM D 502 : 1989 : R1995 : EDT 1 Standard Test Method for Particle Size of Soaps and Other Detergents
ASTM D 716 : 1986 : R2019 Standard Test Methods for Evaluating Mica Pigment
ASTM D 3639 : 1992 : R2002 : EDT 2 Standard Test Method for Classification of Asbestos by Quebec Standard Test
AASHTO T 113 : 2015 METHOD OF TEST FOR LIGHTWEIGHT PIECES IN AGGREGATE
AASHTO T 104 : 1999 METHOD OF TEST FOR SOUNDNESS OF AGGREGATE BY USE OF SODIUM SULFATE OR MAGNESIUM SULFATE
AASHTO T 195 : 2011 METHOD OF TEST FOR DETERMINING DEGREE OF PARTICLE COATING OF ASPHALT MIXTURES
ASTM D 287 : 1992 : R2006 Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
AASHTO T 288 : 2012 METHOD OF TEST FOR DETERMINING MINIMUM LABORATORY SOIL RESISTIVITY
AASHTO T 112 : 2000 METHOD OF TEST FOR CLAY LUMPS AND FRIABLE PARTICLES IN AGGREGATE
AASHTO T 255 : 2000 METHOD OF TEST FOR TOTAL EVAPORABLE MOISTURE CONTENT OF AGGREGATE BY DRYING
AASHTO R 58 : 2011 : R2015 PRACTICE FOR DRY PREPARATION OF DISTURBED SOIL AND SOIL-AGGREGATE SAMPLES FOR TEST
ASTM D 3282 : 2015 : REDLINE Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes
AASHTO T 85 : 2014 STANDARD METHOD OF TEST FOR SPECIFIC GRAVITY AND ABSORPTION OF COARSE AGGREGATE
AASHTO T 103 : 2008 METHOD OF TEST FOR SOUNDNESS OF AGGREGATES BY FREEZING AND THAWING
AASHTO T 303 : 2000 METHOD OF TEST FOR ACCELERATED DETECTION OF POTENTIALLY DELETERIOUS EXPANSION OF MORTAR BARS DUE TO ALKALI-SILICA REACTION
AASHTO T 19M/T 19 : 1900 METHOD OF TEST FOR BULK DENSITY ('UNIT WEIGHT') AND VOIDS IN AGGREGATE
AASHTO T 190 : 2014 METHOD OF TEST FOR RESISTANCE R-VALUE AND EXPANSION PRESSURE OF COMPACTED SOILS
AASHTO T 37 : 2007 : R2011 METHOD OF TEST FOR SIEVE ANALYSIS OF MINERAL FILLER FOR HOT MIX ASPHALT (HMA)
AASHTO T 27 : 2014 METHOD OF TEST FOR SIEVE ANALYSIS OF FINE AND COARSE AGGREGATES
ASTM C 61/C61M : 2000 : R2011 Standard Specification for Gypsum Keene's Cement
ASTM D 197 : 1987 : R1994 : EDT 1 Standard Test Method for Sampling and Fineness Test of Pulverized Coal
ASTM A 482 : 2005 Standard Specification for Ferrochrome-Silicon
ASTM A 482/A482M : 2011 : R2016 Standard Specification for Ferrochrome-Silicon
ASTM C 142 : 1997 Standard Test Method for Clay Lumps and Friable Particles in Aggregates
ASTM C 1260 : 2014 : REDLINE Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)
ASTM E 728 : 1991 : R2009 Standard Test Method for Resistance to Attrition of Granular Carriers and Granular Pesticides
ASTM D 451/D451M : 2017 : REDLINE Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products
ASTM D 1135 : 1986 : R2009 Standard Test Methods for Chemical Analysis of Blue Pigments
ASTM E 726 : 2001 : R2006 Standard Test Method for Particle Size Distribution of Granular Carriers and Granular Pesticides
ASTM F 1632 : 2003 Standard Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes
ASTM D 558 : 2011 : REDLINE Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures
ASTM F 1128 : 1988 Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using Salt Impingement Method (Withdrawn 1996)
ASTM D 3280 : 1985 : R2004 Standard Test Methods for Analysis of White Zinc Pigments
ASTM D 452 : 1991 : R1997 : EDT 1 Standard Test Method for Sieve Analysis of Surfacing for Asphalt Roofing Products
ASTM D 5976 : 2000 Standard Specification for Type I Polymer Modified Asphalt Cement for Use in Pavement Construction (Withdrawn 2005)
ASTM D 2752 : 1988 : R2006 Standard Test Methods for Air Permeability of Asbestos Fibers
ASTM D 5581 : 2007 : REV A : R2013 Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen)
ASTM E 2542 : 2008 : R2014 Standard Specification for Portable Water Heaters Used at Personnel Decontamination Stations
ASTM D 6376 : 2010 Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-Ray Fluorescence Spectroscopy
ASTM D 1508 : 2012 : R2017 Standard Test Method for Carbon Black, Pelleted Fines and Attrition
ASTM C 784 : 2016 : REDLINE Standard Specification for Nuclear-Grade Aluminum Oxide-Boron Carbide Composite Pellets
ASTM C 1761/C1761M : 2017 : REDLINE Standard Specification for Lightweight Aggregate for Internal Curing of Concrete
ASTM C 999 : 2017 : REDLINE Standard Practice for Soil Sample Preparation for the Determination of Radionuclides
ASTM C 59/C59M : 2000 : R2015 Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster
ASTM D 4715 : 1998 Standard Test Method for Coking Value of Tar and Pitch (Alcan)
ASTM C 59/C59M : 2000 : R2011 Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster
ASTM D 2764 : 1999 : R2004 : EDT 1 Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch
ASTM C 1335:2012 Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation
ASTM F 3187 : 2016 Standard Guide for Directed Energy Deposition of Metals
ASTM D 1118 : 1995 : R2004 : EDT 1 Standard Test Method for Magnetic Rating of Asbestos Fiber and Asbestos Textiles
ASTM D 6913 : 2004 : R2009 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM F 3012 : 2014 Standard Specification for Loose-Fill Rubber for Use as a Playground Safety Surface under and around Playground Equipment
ASTM E 20 : 1985 Practice for Particle Size Analysis of Particulate Substances in the Range of 0.2 to 75 UM by Optical Microscopy (Withdrawn 1994)
ASTM D 2589 : 1988 : R2006 : EDT 1 Standard Test Method for McNett Wet Classification of Dual Asbestos Fiber
ASTM D 1742 : 2006 : R2013 Standard Test Method for Oil Separation from Lubricating Grease During Storage
ASTM D 6913 : 2004 : EDT 2 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D 502 : 1989 : R2016 Standard Test Method for Particle Size of Soaps and Other Detergents
ASTM D 2320 : 1998 : R2008 Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
ASTM C 186 : 2017 : REDLINE Standard Test Method for Heat of Hydration of Hydraulic Cement
ASTM D 3042 : 2017 : REDLINE Standard Test Method for Insoluble Residue in Carbonate Aggregates
ASTM D 3639 : 1992 : R2002 Standard Test Method for Classification of Asbestos by Quebec Standard Test
ASTM E 323 : 2011 : R2016 Standard Specification for Perforated-Plate Sieves for Testing Purposes
ASTM C 1152/C1152M:2004 Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete
ASTM C 371 : 2009 Standard Test Method for Wire-Cloth Sieve Analysis of Nonplastic Ceramic Powders
ASTM D 3280 : 1985 : R2004 : EDT 1 Standard Test Methods for Analysis of White Zinc Pigments
ASTM B 214 : 2016 : REDLINE Standard Test Method for Sieve Analysis of Metal Powders
ASTM A 601 : 2005 Standard Specification for Electrolytic Manganese Metal
ASTM D 1118 : 1995 : R1999 Standard Test Method for Magnetic Rating of Asbestos Fiber and Asbestos Textiles
ASTM D 7560 : 2016 Standard Test Method for Determination of Fiber Length Percentages in Hydraulic Erosion Control Products (HECPs)
ASTM D 3880/D3880M : 1990 : R2017 Standard Test Method for Asbestos Strength Units (Withdrawn 2022)
ASTM D 3977 : 1997 : R2013 Standard Test Methods for Determining Sediment Concentration in Water Samples
ASTM D 3402/D3402M : 2016 : REDLINE Standard Test Method for Tumbler Test for Coke
ASTM E 956 : 1983 : R2005 Standard Classification for Municipal-Mixed Nonferrous Metals (MNM)
ASTM E 726 : 2001 : R2015 Standard Test Method for Particle Size Distribution of Granular Carriers and Granular Pesticides
ASTM C 1176/C1176M : 2013 : REDLINE Standard Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table
ASTM C 157/C157M : 2017 : REDLINE Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete
BS EN ISO 12086-2:2006 Plastics. Fluoropolymer dispersions and moulding and extrusion materials Preparation of test specimens and determination of properties
ISO 7711-3:2004 Dentistry Diamond rotary instruments Part 3: Grit sizes, designation and colour code
CSA C22.2 No. 145 : 2011 ELECTRIC MOTORS AND GENERATORS FOR USE IN HAZARDOUS (CLASSIFIED) LOCATIONS
CSA B366.1 : 2011 : R2015 SOLID-FUEL-FIRED CENTRAL HEATING APPLIANCES
CSA C22.2 No. 145 : 2011 : R2015 ELECTRIC MOTORS AND GENERATORS FOR USE IN HAZARDOUS (CLASSIFIED) LOCATIONS
CSA C22.2 No. 145 : 2011 : INC : UPD 1 : 2017 : R201500 ELECTRIC MOTORS AND GENERATORS FOR USE IN HAZARDOUS (CLASSIFIED) LOCATIONS
ASTM F 2363/F2363M : 2017 : REDLINE Standard Specification for Sewage and Graywater Flow Through Treatment Systems
UNI EN ISO 13500 : 2011 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUID MATERIALS - SPECIFICATIONS AND TESTS
UNI EN ISO 13503-2 : 2010 PETROLEUM AND NATURAL GAS INDUSTRIES - COMPLETION FLUIDS AND MATERIALS - PART 2: MEASUREMENT OF PROPERTIES OF PROPPANTS USED IN HYDRAULIC FRACTURING AND GRAVEL-PACKING OPERATIONS
UNI EN ISO 13678 : 2012 PETROLEUM AND NATURAL GAS INDUSTRIES - EVALUATION AND TESTING OF THREAD COMPOUNDS FOR USE WITH CASING, TUBING, LINE PIPE AND DRILL STEM ELEMENTS
UNI EN ISO 10426-1 : 2010 PETROLEUM AND NATURAL GAS INDUSTRIES - CEMENTS AND MATERIALS FOR WELL CEMENTING - PART 1: SPECIFICATION
UNI EN ISO 12086-2 : 2006 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
ASTM D 2638 : 2010 Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer
ASTM E 2543 : 2008 Standard Specification for Portable Air Heaters Used at Personnel Decontamination Stations and Shelters
ASTM D 1748 : 2010 : R2015 Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet
ASTM D 5444 : 2015 : REDLINE Standard Test Method for Mechanical Size Analysis of Extracted Aggregate
ASTM D 5159 : 2004 : R2009 Standard Guide for Dusting Attrition of Granular Activated Carbon
AASHTO T 11 : 2005 : R2013 METHOD OF TEST FOR MATERIALS FINER THAN 75-[MU]M (NO. 200) SIEVE IN MINERAL AGGREGATES BY WASHING
SAE J 997 : 2013 SPARK ARRESTER TEST CARBON
ASTM D 3451 : 2006 Standard Guide for Testing Coating Powders and Powder Coatings
AWWA C104/A21.4 : 2016 CEMENT - MORTAR LINING FOR DUCTILE-IRON PIPE AND FITTINGS EFFECTIVE
ASTM E 1072 : 1985 : R1989 : EDT 1 Test Method for Low Temperature Breakdown of Iron Ores
ASTM D 4315 : 1994 Standard Test Methods for Rubber Compounding Material—Zinc Oxide
ASTM D 6935 : 2017 : REDLINE Standard Test Method for Determining Cement Mixing of Emulsified Asphalt
ASTM C 331/C331M : 2017 : REDLINE Standard Specification for Lightweight Aggregates for Concrete Masonry Units
ASTM E 2814 : 2011 Standard Guide for Industrial Woven Wire Filter Cloth
MIL-T-7099 Revision E:1979 TERMINAL, LUG AND SPLICE, CRIMP STYLE ALUMINUM FOR ALUMINUM AIRCRAFT WIRE
ASTM D 7428 : 2015 : REDLINE Standard Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
AASHTO T 290 : 1995 METHOD OF TEST FOR DETERMINING WATER-SOLUBLE SULFATE ION CONTENT IN SOIL
MIL-DTL-12468 Revision E:2009 DECONTAMINATING AGENT, STB
MIL-S-23923 Revision D:1984 SPRAYER AND DUSTER UNITS, INSECTICIDE, MIST DUST BLOWER TYPE, GED, 30 TO 100 GAL/H LIQUID, 30 TO 300 LB/H DUST (COMMERCIAL)
ASTM F 1632 : 2003 : R2010 Standard Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes
ASTM D 5004 : 2011 Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement
SAE AMS 2430 : 2015 SHOT PEENING
AWWA B403 : 2016 ALUMINUM SULFATE - LIQUID, GROUND, OR LUMP
MIL-DTL-440 Revision D:2015 Composition A-3 and A-4
QQ-B-650 Revision C:1987 BRAZING ALLOYS, COPPER, COPPER ZINC, AND COPPER PHOSPHORUS
ASTM D 4616 : 1995 Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch
ASTM D 5514 : 2006 Standard Test Method for Large Scale Hydrostatic Puncture Testing of Geosynthetics
API 13J SPANISH : 1996 PRUEBAS CON SALMUERAS PESADAS
CSA Z201 : 0 QUALIFICATION CODE FOR ONTARIO FOR LABORATORIES ANALYZING INDUSTRIAL WASTE
ASTM C 831 : 2018 : REDLINE Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes
MIL B 003473 : A BEAD, LABORATORY, GLASS
ASTM D 5644 : 2001 : R2008 : EDT 1 Standard Test Methods for Rubber Compounding Materials Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
DWA-M 143-20:2018 TEST METHOD FOR DROP IMPACT RESISTANCE OF BLOW-MOLDED THERMOPLASTIC CONTAINERS
ASTM C 1218/C1218M : 2017 : REDLINE Standard Test Method for Water-Soluble Chloride in Mortar and Concrete
MIL-S-11578 Revision D:1978 SHAKING MACHINE, TESTING SIEVE, LABORATORY, PORTABLE, HAND OPERATED, CAPACITY 6 FULL HEIGHT OR 13 HALF HEIGHT 8 INCH STANDARD SIEVES
MIL-C-14264 Revision A:1978 CALCIUM PHOSPHATE, TRIBASIC, TECHNICAL
ASTM D 1739 : 1998 Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter)
ASTM E 102/E102M : 1993 : R2009 Standard Test Method for Saybolt Furol Viscosity of Bituminous Materials at High Temperatures
ASTM D 806 : 2011 : REDLINE Standard Test Method for Cement Content of Hardened Soil-Cement Mixtures
ASTM D 5711 : 2003 Standard Test Method for Determining the Adherent Coating on Coarse Aggregates (Withdrawn 2012)
SS-P-821 Revision C:1989 PUMICE, GROUND, ABRASIVE
ASTM D 410 : 1984 Method of Sieve Analysis of Coal (Withdrawn 1988)
ASTM D 480 : 1988 : R2014 Standard Test Methods for Sampling and Testing of Flaked Aluminum Powders and Pastes
ASTM A 132 : 2004 : R2014 Standard Specification for Ferromolybdenum
API 19C:2008 MEASUREMENT OF PROPERTIES OF PROPPANTS USED IN HYDRAULIC FRACTURING AND GRAVEL-PACKING OPERATIONS
ASTM D 2067 : 1997 : R2008 Standard Test Method for Coarse Particles in Printing Ink Dispersions
ASTM D 5158 : 1998 : R2005 Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air Jet Sieving
ASTM C 571 : 1981 : R1990 Methods for Chemical Analysis of Carbon and Carbon-Ceramic Refractories
ASTM D 3466 : 2006 Standard Test Method for Ignition Temperature of Granular Activated Carbon
AASHTO R 31 : 2009 : R2014 PRACTICE FOR EVALUATION OF PROTECTIVE COATING SYSTEMS FOR STRUCTURAL STEEL
BS EN ISO 13678:2012 Petroleum and natural gas industries. Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements
QQ-B-654 Revision A:1980 BRAZING ALLOY, SILVER
ASTM D 5603 : 2001 : R2008 Standard Classification for Rubber Compounding Materials<span class='unicode'>—</span>Recycled Vulcanizate Particulate Rubber
04/30124757 DC : DRAFT NOV 2004 ISO 13500 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUID MATERIALS - SPECIFICATIONS AND TESTS
DIN ISO 20279:2006-01 Soil quality - Extraction of thallium and determination by electrothermal atomic absorption spectrometry (ISO 20279:2005)
MIL-DTL-23919 Revision C:2012 REFERENCE CELL, IMPRESSED CURRENT CATHODIC PROTECTION (ICCP) - SILVER-SILVER CHLORIDE
MIL-A-82667-2 Base Document:1977 AMMONIUM PERCHLORATE, CONDITIONED
ASTM F 3302 : 2018 Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion
ASTM D 1739 : 1998 : R2004 Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter)
ASTM D 4315 : 1994 : R2001 Standard Test Methods for Rubber Compounding Material—Zinc Oxide
ASTM D 269 : 1997 : R2015 Standard Test Method for Insoluble Matter in Rosin and Rosin Derivatives
UFC 3-260-17 : 2004 UNIFIED FACILITIES CRITERIA - DUST CONTROL FOR ROADS, AIRFIELDS AND ADJACENT AREAS
ASTM D 3977 : 1997 : R2013 : EDT 1 Standard Test Methods for Determining Sediment Concentration in Water Samples
AWWA B405 : 2016 SODIUM ALUMINATE
MIL-STD-621 Revision A:1964 TEST METHODS FOR PAVEMENT SUBGRADE, SUBBASE, AND BASE COURSE MATERIAL
ASTM C 458 : 1998 : R2002 : EDT 1 Standard Test Method for Organic Fiber Content of Asbestos-Cement Products
ASTM A 550 : 2016 : REDLINE Standard Specification for Ferrocolumbium (Ferroniobium)
BS EN ISO 17824:2014 Petroleum and natural gas industries. Downhole equipment. Sand screens
BS ISO 13501 : 2005 AMD 16886 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - PROCESSING SYSTEMS EVALUATION
10/30219716 DC : 0 BS EN ISO 13501 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - PROCESSING SYSTEMS EVALUATION
O-O-690 Revision C:1992 OXALIC ACID, DIHYDRATE, TECHNICAL
ASTM C 146 : 1994 : REV A : R1999 Standard Test Methods for Chemical Analysis of Glass Sand
MIL-DTL-382 Revision E:2014 Magnesium Powder - For Use In Ammunition
ASTM D 5603 : 2001 Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber
ASTM D 698 : 2013-05 TEST METHODS FOR LABORATORY COMPACTION CHARACTERISTICS OF SOIL USING STANDARD EFFORT (12400 FT-LBF/FT[3] (600 KN-M/M[3]))
09/30194936 DC : DRAFT JAN 2009 BS EN ISO 28460 - PETROLEUM AND NATURAL GAS INDUSTRIES - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - SHIP-TO-SHORE INTERFACE AND PORT OPERATIONS
ASTM D 5581 : 2007 : REV A Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen)
ASTM D 5892 : 2000 Standard Specification for Type IV Polymer-Modified Asphalt Cement for Use in Pavement Construction (Withdrawn 2005)
AASHTO TP 121 : 2016 METHOD OF TEST FOR DETERMINING THE VISCOSITY OF EMULSIFIED ASPHALT BY A ROTATIONAL PADDLE VISCOMETER
SAE AMS 3411 : 2016 FLUX, SILVER BRAZING HIGH TEMPERATURE
ASTM D 1283 : 2005 : R2013 Standard Test Method for Alkali-Solubility of Wools (Withdrawn 2022)
ASTM D 4570 : 2002 : R2017 Standard Test Method for Rubber Chemicals—Determination of Particle Size of Sulfur by Sieving (Dry)
ASTM D 4643 : 2017 : REDLINE Standard Test Method for Determination of Water Content of Soil and Rock by Microwave Oven Heating
ASTM D 3639 : 1992 : R2006 : EDT 1 Standard Test Method for Classification of Asbestos by Quebec Standard Test
ASTM C 35 : 2001 : R2009 Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster
ASTM D 448 :2012 Standard Classification for Sizes of Aggregate for Road and Bridge Construction
ASTM D 50 : 1990 : R2011 Standard Test Methods for Chemical Analysis of Yellow, Orange, Red, and Brown Pigments Containing Iron and Manganese
ASTM D 5493 : 2006 : R2011 Standard Test Method for Permittivity of Geotextiles Under Load
ASTM F 2075 : 2015 : REDLINE Standard Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment
AASHTO M 318 : 2002 : R2015 SPECIFICATION FOR GLASS CULLET USE FOR SOIL-AGGREGATE BASE COURSE
MIL-T-13405 Revision E:1984 TITANIUM, TECHNICAL, POWER
DOD D 51522 : 0 DYE, DISPERSE RED 11 (METRIC)
MIL-A-82830 Base Document:1990 AMMONIUM PERCHLORATE, CONDITIONED (WITH REDUCED ALKALI METAL CONTENT)
ASTM D 3451 : 2006 : R2012 Standard Guide for Testing Coating Powders and Powder Coatings
ASTM A 835 : 1984 : R2000 Standard Specification for Sizes of Ferroalloys and Alloy Additives
API 5A2 : 6ED 88 BULLETIN ON THREAD COMPOUNDS FOR CASING, TUBING AND LINE PIPE
ASTM C 87/C87M : 2017 : REDLINE Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
MIL-C-12056 Revision C:1981 CALCIUM OXIDE, TECHNICAL (METRIC)
ASTM D 5821 : 2013 Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
ASTM E 1520 : 1999 : R2009 Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations
ASTM D 451 : 1991 : R2008 Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products
ASTM D 7367 : 2014-06 TEST METHOD FOR DETERMINING WATER HOLDING CAPACITY OF FIBER MULCHES FOR HYDRAULIC PLANTING
AWWA B550 : 2017 CALCIUM CHLORIDE
ASTM D 7226 : 2013 : R2017 Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer
ASTM D 6374 : 2012 : R2017 : EDT 1 Standard Test Method for Volatile Matter in Green Petroleum Coke Quartz Crucible Procedure
ASTM D 8097 : 2017 Standard Test Method for Determination of Bulk Density for Specific Size Fractions of Calcined Petroleum Coke Using a Transaxial Pressure Pycnometer
SAE AMS 3041 : 2014 MAGNETIC PARTICLES, NONFLUORESCENT, WET METHOD, OIL VEHICLE, READY-TO-USE
ASTM D 185 : 2007 Standard Test Methods for Coarse Particles in Pigments
SAE AS 5127/1 : 2014 AEROSPACE STANDARD TEST METHODS FOR AEROSPACE SEALANTS TWO-COMPONENT SYNTHETIC RUBBER COMPOUNDS
API 13A : 2010 : INC : ERR 3 : 2015 SPECIFICATION FOR DRILLING FLUIDS MATERIALS
ASTM C 430 : 2017 : REDLINE Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve
ASTM D 6647 : 2001 : R2011 Standard Test Method for Determination of Acid Soluble Iron Via Atomic Absorption
ASTM E 2542 : 2008 Standard Specification for Portable Water Heaters Used at Personnel Decontamination Stations
SAE AMS 2431 : 2018 PEENING MEDIA, GENERAL REQUIREMENTS
ASTM D 4315 : 1994 : R2006 Standard Test Methods for Rubber Compounding Material-Zinc Oxide
ASTM F 3056 : 2014 Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion
ASTM C 702/C702M : 2018 : REDLINE Standard Practice for Reducing Samples of Aggregate to Testing Size
ASTM D 4072 : 1998 : R2013 Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch
ASTM C 888 : 2003 : R2008 Standard Specification for Nuclear-Grade Gadolinium Oxide (Gd<sub>2</sub>O<sub>3</sub>) Powder
ASTM D 4931 : 2006 Standard Test Method for Gross Moisture in Green Petroleum Coke
ASTM C 142/C142M : 2017 : REDLINE Standard Test Method for Clay Lumps and Friable Particles in Aggregates
ASTM D 480 : 1988 : R2003 Standard Test Methods for Sampling and Testing of Flaked Aluminum Powders and Pastes
I.S. EN ISO 28460:2010 PETROLEUM AND NATURAL GAS INDUSTRIES - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - SHIP-TO-SHORE INTERFACE AND PORT OPERATIONS
ASTM D 5092/D5092M : 2016 : REDLINE Standard Practice for Design and Installation of Groundwater Monitoring Wells
UNI EN ISO 17824 : 2014 PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SAND SCREENS
ASTM D 4570 : 2002 Standard Test Method for Rubber Chemicals—Determination of Particle Size of Sulfur by Sieving (Dry)
ASTM A 601/A601M : 2010 Standard Specification for Electrolytic Manganese Metal
AASHTO T 176 : 2008 METHOD OF TEST FOR PLASTIC FINES IN GRADED AGGREGATES AND SOILS BY USE OF THE SAND EQUIVALENT TEST
ASTM C 1077 : 2017 : REDLINE Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
BS EN ISO 10426-1:2009 Petroleum and natural gas industries. Cements and materials for well cementing Specification
ASTM D 5603 : 2001 : R2015 Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber
AASHTO T 99 : 2015 METHOD OF TEST FOR MOISTURE-DENSITY RELATIONS OF SOILS USING A 2.5-KG (5.5-LB) RAMMER AND A 305-MM (12-IN.) DROP
ASTM D 1705 : 1992 Test Method for Particle Size Analysis of Powdered Polymers and Copolymers of Vinyl Chloride (Withdrawn 1998)
ASTM D 5004 : 2011 : R2017 Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement
ASTM D 7655/D7655M : 2012 Standard Classification for Size of Aggregate Used as Ballast for Membrane Roof Systems
ASTM F 3091/F3091M : 2014 Standard Specification for Powder Bed Fusion of Plastic Materials
ASTM E 728 : 1991 : R1997 Standard Test Method for Resistance to Attrition of Granular Carriers and Granular Pesticides
ASTM D 1914 : 1995 : R2010 Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres
ASTM D 441 : 2007 : R2012 Standard Test Method of Tumbler Test for Coal
ASTM D 4749 : 1987 : R2012 Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size
ASTM C 472 : 1999 : R2004 Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete
ASTM D 8135 : 2017 Standard Guide for Selection of Substitute, Non-hazardous, Particulate Solid Filling Substances for Packagings Subjected to the United Nations Performance Tests
ASTM C 1078 : 1987 : R1992 : EDT 1 Test Methods for Determining the Cement Content of Freshly Mixed Concrete (Withdrawn 1998)
ASTM C 357 : 2007 : R2009 : EDT 1 Standard Test Method for Bulk Density of Granular Refractory Materials
ASTM D 2589 : 1988 : R2002 : EDT 1 Standard Test Method for McNett Wet Classification of Duel Asbestos Fiber
ASTM C 1152/C1152M : 2004 : EDT 1 Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete
ASTM D 2487 : 2017 : REDLINE Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)
ASTM F 3001 : 2014 : REDLINE Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) with Powder Bed Fusion
ASTM D 2861 : 1987 : R2004 Standard Test Methods for Flexible Composites of Copper Foil with Dielectric Film or Treated Fabrics
ASTM D 2589 : 1988 : R2002 Standard Test Method for McNett Wet Classification of Duel Asbestos Fiber
ASTM C 708 : 2016 : REDLINE Standard Specification for Nuclear-Grade Beryllium Oxide Powder
ASTM C 184 : 1994 : EDT 1 Standard Test Method for Fineness of Hydraulic Cement by the 150-&#181m (No. 100) and 75-&#181m (No. 200) Sieves (Withdrawn 2002)
ASTM C 492 : 1992 : R2013 Standard Test Method for Hydration of Granular Dead-Burned Refractory Dolomite
ASTM D 1742 : 2006 Standard Test Method for Oil Separation from Lubricating Grease During Storage
ASTM D 1370/D1370M : 2012 Standard Test Method for Contact Compatibility Between Asphaltic Materials (Oliensis Test)
ASTM D 4718 : 1987 : R1994 : EDT 2 Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles
ASTM D 4371 : 2006 : R2012 Standard Test Method for Determining the Washability Characteristics of Coal
ASTM D 936 : 1989 Method of Test for Aromatic Hydrocarbons in Olefin-Free Gasolines by Silica Gel Absorption (Withdrawn 1990)
ASTM D 1665 : 1998 Standard Test Method for Engler Specific Viscosity of Tar Products
ASTM D 451 : 1991 : R1996 : EDT 1 Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products
ASTM D 3880 : 1990 : R1999 Standard Test Method for Asbestos Strength Units
ASTM D 2940 : 2003 Standard Specification for Graded Aggregate Material For Bases or Subbases for Highways or Airports
ASTM D 5159 : 2004 : R2014 Standard Guide for Dusting Attrition of Granular Activated Carbon
ASTM D 444 : 1988 : R2008 Standard Test Methods for Chemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow)
ASTM D 5299/D5299M : 2018 : REDLINE Standard Guide for Decommissioning of Groundwater Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities
ASTM D 2331 : 2008 : R2013 Standard Practices for Preparation and Preliminary Testing of Water-Formed Deposits
ASTM D 480 : 1988 : R1999 Standard Test Methods for Sampling and Testing of Flaked Aluminum Powders and Pastes
ASTM D 1266 : 2018 : REDLINE Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
ASTM D 1665 : 1998 : R2003 Standard Test Method for Engler Specific Viscosity of Tar Products
ASTM D 2861 : 1987 : R1998 Standard Test Methods for Flexible Composites of Copper Foil with Dielectric Film or Treated Fabrics
ASTM D 1557 : 2012 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup> (2,700 kN-m/m<sup>3</sup>))
ASTM D 4930 : 2006 : R2017 Standard Test Method for Dust Control Material on Calcined Petroleum Coke
ASTM C 225 : 1985 : R2014 Standard Test Methods for Resistance of Glass Containers to Chemical Attack
I.S. EN ISO 13678:2012 PETROLEUM AND NATURAL GAS INDUSTRIES - EVALUATION AND TESTING OF THREAD COMPOUNDS FOR USE WITH CASING, TUBING, LINE PIPE AND DRILL STEM ELEMENTS (ISO 13678:2010)
GOST 849:2018 Primary nickel. SpecificationsE
I.S. CWA 14243:2002 POST-CONSUMER TYRE MATERIALS AND APPLICATIONS
EN ISO 13500:2008/A1:2010 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUID MATERIALS - SPECIFICATIONS AND TESTS
NSF 50 : 2016 EQUIPMENT FOR SWIMMING POOLS, SPAS, HOT TUBS AND OTHER RECREATIONAL WATER FACILITIES
DIN EN ISO 7711-3 E : 2005 DENTISTRY - DIAMOND ROTARY INSTRUMENTS - PART 3: GRIT SIZES, DESIGNATION AND COLOUR CODE
BS EN ISO 7711-3:2004 Dentistry. Diamond rotary instruments Grit sizes, designation and colour code
ISO 17824:2009 Petroleum and natural gas industries Downhole equipment Sand screens
ISO 20568-2:2017 Plastics Fluoropolymer dispersions and moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN ISO 13503-2 : 2006 PETROLEUM AND NATURAL GAS INDUSTRIES - COMPLETION FLUIDS AND MATERIALS - PART 2: MEASUREMENT OF PROPERTIES OF PROPPANTS USED IN HYDRAULIC FRACTURING AND GRAVEL-PACKING OPERATIONS
ISO 12086-2:2006 Plastics Fluoropolymer dispersions and moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
03/112565 DC : DRAFT AUG 2003 ISO 6182-9 - FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEM - PART 9: REQUIREMENTS AND TEST METHODS FOR WATER MIST NOZZLES
ISO 13501:2011 Petroleum and natural gas industries Drilling fluids Processing equipment evaluation
ISO 6182-9:2005 Fire protection — Automatic sprinkler system — Part 9: Requirements and test methods for water mist nozzles
EN ISO 28460:2010 Petroleum and natural gas industries - Installation and equipment for liquefied natural gas - Ship-to-shore interface and port operations (ISO 28460:2010)
EN ISO 12086-2:2006/AC:2009 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 7711-3:2004 Dentistry - Diamond rotary instruments - Part 3: Grit sizes, designation and colour code (ISO 7711-3:2004)
EN ISO 17824 : 2014 PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SAND SCREENS (ISO 17824:2009)
EN ISO 13501:2011 Petroleum and natural gas industries - Drilling fluids - Processing equipment evaluation (ISO 13501:2011)
EN ISO 20568-2:2017 Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20568-2:2017)
EN ISO 13678:2012 Petroleum and natural gas industries - Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements (ISO 13678:2010)
ASTM A 635/A635M : 2015 : REDLINE Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
ASTM F 1864 : 2016 : REDLINE Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings
MIL-STD-1445 Revision A:1994 METAL ORGANIC COMPOUNDS, TECHNICAL GRADE
MIL-STD-1207 Revision B:1987 INORGANIC SALTS AND COMPOUNDS, TECHNICAL GRADE (POTASSIUM BICARBONATE THROUGH SILVER CYANIDE)
MIL-DTL-211 Revision F:2000 Phosphorus, Red, Technical
AWWA B702 : 2011 SODIUM FLUOROSILICATE
ASTM C 24 : 2009 Standard Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High Alumina Refractory Materials
ASTM D 1863 : 2005 Standard Specification for Mineral Aggregate Used on Built-Up Roofs
ASTM D 421 : 1985 : R1998 Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants
API 13C REDLINE : 2010 RECOMMENDED PRACTICE ON DRILLING FLUIDS PROCESSING SYSTEMS EVALUATION
ASTM D 1914 : 1995 : R2004 : EDT 1 Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres
ASTM D 4315 : 1994 : R2017 Standard Test Methods for Rubber Compounding Material—Zinc Oxide
AWWA B102:2015 MANGANESE GREENSAND FOR FILTERS
AWWA B200 : 2017 SODIUM CHLORIDE
ASTM D 1866 : 1979 : R1984 Test Method for Translucency of Mineral Aggregate Used on Built-Up Roofs (Withdrawn 1989)
SAE AMS 3042 : 2014 MAGNETIC PARTICLES, NONFLUORESCENT, WET METHOD, DRY POWDER
ASTM E 2016 : 2015 : REDLINE Standard Specification for Industrial Woven Wire Cloth
ASTM D 1301 : 1991 : R1999 Standard Test Methods for Chemical Analysis of White Lead Pigments
ASTM C 1746/C1746M : 2012 Standard Test Method for Measurement of Suspended Sediment Removal Efficiency of Hydrodynamic Stormwater Separators and Underground Settling Devices
ASTM C 575 : 1981 : R1990 Methods for Chemical Analysis of Silica Refractories
UNE-EN ISO 20568-2:2017 Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20568-2:2017)
ASTM D 1633 : 2017 Standard Test Methods for Compressive Strength of Molded Soil-Cement Cylinders
API 13A : 2010 : INC : ERR 4 : 2016 : R201500 SPECIFICATION FOR DRILLING FLUIDS MATERIALS
ASTM D 4751 : 2016 : REDLINE Standard Test Methods for Determining Apparent Opening Size of a Geotextile
ASTM D 2419 : 2014 : REDLINE Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate
ASTM D 3904 : 1990 Test Method for Oil From Oil Shale (Resource Evaluation by the Fischer Assay Procedure) (Withdrawn 1996)
ASTM C 135 : 1996 Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion
ASTM C 329 : 1988 : R1999 Standard Test Method for Specific Gravity of Fired Ceramic Whiteware Materials
MIL-P-62680 Base Document:1992 POWDER, NICKEL-CHROMIUM/ALUMINUM COMPOSITE (METRIC)
ASTM D 4072 : 1998 Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch
ASTM F 1953 : 2010 Standard Guide for Construction and Maintenance of Grass Tennis Courts
ASTM E 688 : 1994 : R1999 Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing
ASTM D 560/D560M : 2016 : REDLINE Standard Test Methods for Freezing and Thawing Compacted Soil-Cement Mixtures
ASTM D 3880 : 1990 : R2004 : EDT 1 Standard Test Method for Asbestos Strength Units
MIL-STD-286 Revision C:1991 PROPELLANTS, SOLID: SAMPLING, EXAMINATION AND TESTING
AASHTO T 59 : 2015 METHOD OF TEST FOR EMULSIFIED ASPHALTS
ASTM D 1665 : 1998 : R2014 Standard Test Method for Engler Specific Viscosity of Tar Products
UFC 3-260-02 : 2001 UNIFIED FACILITIES CRITERIA - PAVEMENT DESIGN FOR AIRFIELDS
ASTM D 126 : 1987 : R1997 Standard Test Methods for Analysis of Yellow, Orange, and Green Pigments Containing Lead Chromate and Chromium Oxide Green
P-C-437 Revision B:1978 CLEANING COMPOUND, HIGH PRESSURE (STEAM) CLEANER
AASHTO T 135 : 2013 METHOD OF TEST FOR WETTING-AND-DRYING TEST OF COMPACTED SOIL-CEMENT MIXTURES
MIL-STD-1448 Base Document:1990 HYDROCARBON COMPOUNDS & SOLVENT DISTILLATES, TECHNICAL GRADE
ASTM D 1370 : 2000 : R2007 Standard Test Method for Contact Compatibility Between Asphaltic Materials (Oliensis Test)
ASTM E 32 : 2015 Standard Practices for Sampling Ferroalloys and Steel Additives for Determination of Chemical Composition
ASTM D 6084/D6084M : 2013-12 TEST METHOD FOR ELASTIC RECOVERY OF ASPHALT MATERIALS BY DUCTILOMETER
ASTM D 560 : 2003 Standard Test Methods for Freezing and Thawing Compacted Soil-Cement Mixtures (Withdrawn 2012)
ASTM D 2752/D2752M : 1988 : R2011 : EDT 1 Standard Test Methods for Air Permeability of Asbestos Fibers
SAE J 2441 : 2015 SHOT PEENING
ASTM D 4715 : 1998 : R2003 Standard Test Method for Coking Value of Tar and Pitch (Alcan)
MIL-B-36282 Base Document:1964 BEAD, GLASS, LABORATORY, PLASTIC SPECTACLE FRAME WARMER, 5 LB
MIL-STD-1217 Revision C:1991 ORGANIC ACIDS AND ACID ANHYDRIDES, TECHNICAL GRADE
ASTM C 123/C123M : 2014 : REDLINE Standard Test Method for Lightweight Particles in Aggregate (Withdrawn 2023)
ASTM D 3038 : 1993 : R2004 Standard Test Method for Drop Shatter Test for Coke
ASTM D 269 : 1997 : R2011 Standard Test Method for Insoluble Matter in Rosin and Rosin Derivatives
ASTM D 422 : 1963 : R2007 : EDT 2 Standard Test Method for Particle-Size Analysis of Soils (Withdrawn 2016)
MIL-C-51067 Revision B:1983 CALCIUM MAGNESIUM CARBONATE, TECHNICAL (METRIC)
ASTM E 828 : 1981 : R2004 Standard Test Method for Designating the Size of RDF-3 From its Sieve Analysis
ASTM D 422 : 1963 : R2002 : EDT 1 Standard Test Method for Particle-Size Analysis of Soils
ASTM E 728 : 1991 : R2004 : EDT 1 Standard Test Method for Resistance to Attrition of Granular Carriers and Granular Pesticides
API 13A REDLINE : 2010 SPECIFICATION FOR DRILLING FLUIDS MATERIALS
MIL C 82783 : NOTICE 1
DOD-P-51463 Base Document:1980 PHOSPHOROUS, RED, OILED, TECHNICAL (METRIC)
ASTM D 1278 : 1991 : REV A : R2007 Standard Test Methods for Rubber from Natural Sources—Chemical Analysis
ASTM D 1135 : 1986 : R2004 Standard Test Methods for Chemical Analysis of Blue Pigments
BS EN ISO 20568-2:2017 Plastics. Fluoropolymer dispersions and moulding and extrusion materials Preparation of test specimens and determination of properties
ASTM D 3038 : 1993 : R2010 Standard Test Method for Drop Shatter Test for Coke
ASTM D 197 : 1987 : R2002 Standard Test Method for Sampling and Fineness Test of Pulverized Coal
AASHTO T 195 : 2011 : R2015 METHOD OF TEST FOR DETERMINING DEGREE OF PARTICLE COATING OF ASPHALT MIXTURES
BS ISO 13678:2000 Petroleum and natural gas industries. Evaluation and testing of thread compounds for use with casing, tubing and line pipe
ASTM C 357 : 2007 : R2015 Standard Test Method for Bulk Density of Granular Refractory Materials
MIL-P-46994 Revision B:1982 PELLETS/GRANULES BORON/POTASSIUM NITRATE
ASTM E 915 : 2016 : REDLINE Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement
AWWA B402 : 2012 FERROUS SULFATE
MIL-A-202 Revision C:1981 ANTHRACENE, TECHNICAL (METRIC)
ASTM C 141 : 1997 Standard Specification for Hydraulic Hydrated Lime for Structural Purposes
ASTM D 2014 : 1997 : R2004 Standard Test Method for Expansion or Contraction of Coal by the Sole-Heated Oven
ASTM C 1747/C1747M : 2013 : REDLINE Standard Test Method for Determining Potential Resistance to Degradation of Pervious Concrete by Impact and Abrasion
ASTM C 28/C28M : 2010 : R2015 Standard Specification for Gypsum Plasters
ASTM D 2947 : 1988 : R2002 Standard Test Method for Screen Analysis of Asbestos Fibers
MIL-A-175 Revision C:1983 AMMONIUM NITRATE, TECHNICAL (METRIC)
MIL-DTL-10866 Revision E:2005 UREA, TECHNICAL (METRIC)
BS 6828-6.3(1993) : AMD 9234 DENTAL ROTARY INSTRUMENTS - DIAMOND INSTRUMENTS - SPECIFICATION FOR GRIT SIZES, DESIGNATION AND COLOUR CODE
API 5A3 RUSSIAN : 2015 RECOMMENDED PRACTICE ON THREAD COMPOUNDS FOR CASING, TUBING, LINE PIPE, AND DRILL STEM ELEMENTS
ASTM A 922 : 2005 Standard Specification for Silicon Metal
MIL-STD-1437 Revision A:1993 ORGANIC CHEMICAL COMPOUNDS, SOLID, TECHNICAL GRADE
ASTM D 1739 : 1998 : R2010 Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter)
ASTM C 781 : 2008 : R2014 Standard Practice for Testing Graphite and Boronated Graphite Materials for High-Temperature Gas-Cooled Nuclear Reactor Components
ASTM D 4371 : 2006 Standard Test Method for Determining the Washability Characteristics of Coal
ASTM D 3639/D3639M : 1992 : R2011 : EDT 1 Standard Test Method for Classification of Asbestos by Quebec Standard Test
ASTM D 444 : 1988 : R2003 Standard Test Methods for Chemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow)
ASTM C 146 : 1994 : REV A : R2009 Standard Test Methods for Chemical Analysis of Glass Sand
NFPA 484 : 2015 COMBUSTIBLE METALS
ASTM D 716 : 1986 : R2012 Standard Test Methods for Evaluating Mica Pigment
ASTM D 3997 : 1997 Standard Practice for Preparing Coke Samples for Microscopical Analysis by Reflected Light
ASTM C 500/C500M : 2007 : R2011 : EDT 1 Standard Test Methods for Asbestos-Cement Pipe
ASTM C 1387 : 2014 : REDLINE Standard Guide for the Determination of Technetium-99 in Soil
SAE AMS 1448 : 2014 SAND, AIRPORT SNOW AND ICE CONTROL
ASTM C 576 : 1981 : R1990 Methods for Chemical Analysis of Zircon Refractories
ASTM D 1748 : 2010 Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet
ASTM D 3280 : 1985 : R2014 Standard Test Methods for Analysis of White Zinc Pigments
ASTM C 1436 : 2013 : REDLINE Standard Specification for Materials for Shotcrete
API 13A : 2010 : INC : ERR 4 : 2016 SPECIFICATION FOR DRILLING FLUIDS MATERIALS
AASHTO T 143 : 2013 METHOD OF TEST FOR SAMPLING AND TESTING CALCIUM CHLORIDE FOR ROADS AND STRUCTURAL APPLICATIONS
ASTM C 492 : 1992 : R2003 Standard Test Method for Hydration of Granular Dead-Burned Refractory Dolomite
ASTM D 5097 : 1990 : R1996 Standard Test Method for Filter-Retained Solids Content of Polymer Latexes (Withdrawn 2004)
ASTM A 481 : 2005 Standard Specification for Chromium Metal
ASTM D 4513 : 2011 Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving
ASTM C 750 : 2009 Standard Specification for Nuclear-Grade Boron Carbide Powder
API 13A : 2010 : INC : ERR 2 : 2015 SPECIFICATION FOR DRILLING FLUIDS MATERIALS
SAE AMS 3410 : 2016 FLUX, SILVER BRAZING
API RP 13C : 2014 RECOMMENDED PRACTICE ON DRILLING FLUID PROCESSING SYSTEMS EVALUATION
ASTM D 5341 : 1999 : R2010 Standard Test Method for Measuring Coke Reactivity Index (CRI) and Coke Strength After Reaction (CSR)
ASTM A 483 : 2004 Standard Specification for Silicomanganese
ASTM D 2785 : 1980 Method of Test for Trace Quantities of Total Sulfur (Wickbold and Beckman Combustion Apparatus) (Withdrawn 1987)
AASHTO M 318 : 2002 : R2010 SPECIFICATION FOR GLASS CULLET USE FOR SOIL-AGGREGATE BASE COURSE
ASTM C 1797M : 2016 Standard Specification for Ground Calcium Carbonate and Aggregate Mineral Fillers for use in Hydraulic Cement Concrete
ASTM C 323 : 1956 : R2006 Standard Test Methods for Chemical Analysis of Ceramic Whiteware Clays
SAE AMS 3412 : 2014 FLUX, ALUMINUM BRAZING FOR TORCH OR FURNACE BRAZING
ASTM D 2067 : 1997 : R2008 : EDT 1 Standard Test Method for Coarse Particles in Printing Ink Dispersions
DIN EN ISO 20568-2:2015-07 (Draft) PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20568-2:2017)
ASTM D 444 : 1988 : R1999 Standard Test Methods for Chemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow)
ASTM A 610 : 1979 : R2009 Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size
ASTM D 1118 : 1995 : R2004 Standard Test Method for Magnetic Rating of Asbestos Fiber and Asbestos Textiles
ASTM D 50 : 1990 : R1999 Standard Test Methods for Chemical Analysis of Yellow, Orange, Red, and Brown Pigments Containing Iron and Manganese
ASTM C 146 : 1994 : REV A : R2004 Standard Test Methods for Chemical Analysis of Glass Sand
ASTM D 2415 : 2015 : REDLINE Standard Test Method for Ash in Coal Tar and Pitch
ASTM F 104 : 2011 : REDLINE Standard Classification System for Nonmetallic Gasket Materials
ASTM D 6155 : 2015 Standard Specification for Nontraditional Coarse Aggregates for Bituminous Paving Mixtures
ASTM F 2953 : 2012 Standard Specification for Phenolic Raw Materials for the Use in Bearing Cages
ASTM D 1214:2010 Standard Test Method for Sieve Analysis of Glass Spheres
ASTM C 1567 : 2013 : REDLINE Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)
ASTM C 1124 : 1990 : R1999 Standard Test Method for Kerosene Retention of Asbestos
ASTM D 444 : 1988 : R2014 Standard Test Methods for Chemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow)
ASTM D 502 : 1989 : R2003 Standard Test Method for Particle Size of Soaps and Other Detergents
ASTM E 359 : 2017 : REDLINE Standard Test Methods for Analysis of Soda Ash (Sodium Carbonate)
ASTM D 2187 : 2017 : REDLINE Standard Test Methods and Practices for Evaluating Physical and Chemical Properties of Particulate Ion-Exchange Resins
ASTM C 24 : 2009 : R2018 Standard Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High-Alumina Refractory Materials
ASTM F 3184 : 2016 Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion
ASTM C 88 : 2013-08 TEST METHOD FOR SOUNDNESS OF AGGREGATES BY USE OF SODIUM SULFATE OR MAGNESIUM SULFATE
ASTM D 2774 : 2012 : REDLINE Standard Practice for Underground Installation of Thermoplastic Pressure Piping
ASTM D 4749 : 1987 : R2002 Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size
ASTM E 728 : 1991 : R2015 Standard Test Method for Resistance to Attrition of Granular Carriers and Granular Pesticides
ASTM D 1865/D1865M : 2009 : R2017 Standard Test Method for Hardness of Mineral Aggregate Used on Built-Up Roofs
ASTM D 5514/D5514M : 2018 : REDLINE Standard Test Method for Large-Scale Hydrostatic Puncture Testing of Geosynthetics
ASTM D 494 : 2011 : REDLINE Standard Test Method for Acetone Extraction of Phenolic Molded or Laminated Products
ASTM D 559 : 2003 Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures (Withdrawn 2012)
ASTM D 4616 : 1995 : R2018 Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch
ASTM E 102/E102M : 1993 : R2016 Standard Test Method for Saybolt Furol Viscosity of Bituminous Materials at High Temperatures
ASTM C 888 : 2003 Standard Specification for Nuclear-Grade Gadolinium Oxide (Gd<sub>2</sub>O<sub>3</sub>) Powder
ASTM D 422 : 1963 : R2007 : EDT 1 Standard Test Method for Particle-Size Analysis of Soils
ASTM C 285 : 2010 : R2015 : EDT 1 Standard Test Methods for Sieve Analysis of Wet-Milled and Dry-Milled Porcelain Enamel
ASTM D 2752 : 1988 : R2002 : EDT 1 Standard Test Methods for Air Permeability of Asbestos Fibers
ASTM C 323 : 1956 : R1999 Standard Test Methods for Chemical Analysis of Ceramic Whiteware Clays
ASTM A 835/A835M : 2010 : R2015 Standard Specification for Sizes of Ferroalloys and Alloy Additives
ASTM D 7226 : 2013 Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer
ASTM A 100 : 2007 Standard Specification for Ferrosilicon
ASTM D 2589 : 1988 : R2006 Standard Test Method for McNett Wet Classification of Dual Asbestos Fiber
ASTM F 1284 : 2009 Standard Test Method for Evaluating Carpet Embedded Dirt Removal Effectiveness of Residential Central Vacuum Cleaning Systems
ASTM D 6913 : 2004 : EDT 1 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D 2589 : 1988 : R2002 : EDT 2 Standard Test Method for McNett Wet Classification of Dual Asbestos Fiber
ASTM D 4959 : 2016 : REDLINE Standard Test Method for Determination of Water Content of Soil By Direct Heating
ASTM G 105 : 2016 Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests
ASTM D 3639 : 1992 : R2006 Standard Test Method for Classification of Asbestos by Quebec Standard Test
ASTM C 1124 : 1990 : R2004 : EDT 1 Standard Test Method for Kerosene Retention of Asbestos
ASTM D 480 : 1988 : R2008 Standard Test Methods for Sampling and Testing of Flaked Aluminum Powders and Pastes
ASTM D 1301 : 1991 : R2003 Standard Test Methods for Chemical Analysis of White Lead Pigments
ASTM D 5519 : 2015 : REDLINE Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials
ASTM D 1214 : 2010 : R2015 : EDT 1 Standard Test Method for Sieve Analysis of Glass Spheres
ASTM C 1124 : 1990 : R2004 Standard Test Method for Kerosene Retention of Asbestos
ASTM C 123 : 2004 Standard Test Method for Lightweight Particles in Aggregate
ASTM D 1118/D1118M : 1995 : R2009 : EDT 1 Standard Test Method for Magnetic Rating of Asbestos Fiber and Asbestos Textiles
ASTM D 452/D452M : 1991 : R2013 : EDT 1 Standard Test Method for Sieve Analysis of Surfacing for Asphalt Roofing Products
ASTM D 293 : 1993 : R2004 Standard Test Method for the Sieve Analysis of Coke
ASTM C 1176 : 2005 Standard Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table
ASTM D 3402 : 1993 Standard Test Method for Tumbler Test for Coke
ASTM D 5514 : 2006 : R2011 Standard Test Method for Large Scale Hydrostatic Puncture Testing of Geosynthetics
ASTM D 1921 : 2012-09 TEST METHODS FOR PARTICLE SIZE (SIEVE ANALYSIS) OF PLASTIC MATERIALS
ASTM D 440 : 2007 : R2012 Standard Test Method of Drop Shatter Test for Coal
ASTM E 102 : 1993 : R1997 Standard Test Method for Saybolt Furol Viscosity of Bituminous Materials at High Temperatures
ASTM C 1524 : 2002 : REV A : R2010 Standard Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method) (Withdrawn 2019)
ASTM D 4570 : 2002 : R2012 Standard Test Method for Rubber Chemicals—Determination of Particle Size of Sulfur by Sieving (Dry)
ASTM F 3318 : 2018 Standard for Additive Manufacturing – Finished Part Properties – Specification for AlSi10Mg with Powder Bed Fusion – Laser Beam
ASTM C 131/C131M : 2014 : REDLINE Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
ASTM D 3451 : 2006 : R2017 Standard Guide for Testing Coating Powders and Powder Coatings
ASTM D 5644 : 2001 : R2008 Standard Test Methods for Rubber Compounding Materials Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
ASTM D 113 : 2017 Standard Test Method for Ductility of Asphalt Materials
ASTM D 1278 : 1991 : REV A : R2002 : EDT 1 Standard Test Methods for Rubber from Natural Sources-Chemical Analysis
ASTM C 472 : 1999 Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete
ASTM D 6390 : 2011 Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures
ASTM D 6390 : 2011 : R2017 Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures
ASTM D 718 : 1986 : R2008 Standard Test Methods for Analysis of Aluminum Silicate Pigment
ASTM D 5158 : 1998 : R2013 Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air Jet Sieving
ASTM D 1242 : 1995 : REV A Standard Test Methods for Resistance of Plastic Materials to Abrasion (Withdrawn 2004)
ASTM D 1135 : 1986 : R1999 Standard Test Methods for Chemical Analysis of Blue Pigments
ASTM C 371 : 2009 : R2018 Standard Test Method for Wire-Cloth Sieve Analysis of Nonplastic Ceramic Powders
ASTM D 2320 : 1998 Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
ASTM D 197 : 1987 : R2012 Standard Test Method for Sampling and Fineness Test of Pulverized Coal
ASTM D 4026 : 2006 Standard Test Method for Rubber Latex—Styrene-Butadiene Copolymer—Determination of Residual Styrene
ASTM D 6647 : 2001 Standard Test Method for Determination of Acid Soluble Iron Via Atomic Absorption
ASTM A 132 : 2004 : R2009 Standard Specification for Ferromolybdenum
EN ISO 13503-2:2006/A1:2009 Petroleum and natural gas industries - Completion fluids and materials - Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations - Amendment 1: Addition of Annex B: Proppand specification (ISO 13503-2:2006/Amd 1:2009)
ISO 28460:2010 Petroleum and natural gas industries Installation and equipment for liquefied natural gas Ship-to-shore interface and port operations
C22.1-18 Canadian Electrical Code, Part I (24th Edition), Safety Standard for Electrical Installations
DIN EN ISO 12086-2:2006-05 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 7711-3:2004 DENTISTRY - DIAMOND ROTARY INSTRUMENTS - PART 3: GRIT SIZES, DESIGNATION AND COLOUR CODE
ASME NQA 2 : 89 SPECIAL NOTICE QUALITY ASSURANCE REQUIREMENTS FOR NUCLEAR FACILITY APPLICATIONS

MIL-STD-129 Revision R:2014 Military Marking for Shipment and Storage
ISO 3310-1:2016 Test sieves Technical requirements and testing Part 1: Test sieves of metal wire cloth
ASTM E 2016 : 2015 : REDLINE Standard Specification for Industrial Woven Wire Cloth
FED-STD-123 Revision H:2007 MARKING FOR SHIPMENT (CIVIL AGENCIES)

View more information
$135.86
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more