Name: BIS IS 10322-1 : 2014
Brand: BIS

LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS

Published date

12-01-2013

Publisher

Bureau of Indian Standards

FOREWORD
SECTION 0 - GENERAL INTRODUCTION
SECTION 1 - TERMINOLOGY
SECTION 2 - CLASSIFICATION OF LUMINAIRES
SECTION 3 - MARKING
SECTION 4 - CONSTRUCTION
SECTION 5 - EXTERNAL AND INTERNAL WIRING
Section 6 - Not used
SECTION 7 - PROVISION FOR EARTHING
SECTION 8 - PROTECTION AGAINST ELECTRIC SHOCK
SECTION 9 - RESISTANCE TO DUST, SOLID OBJECTS
            AND MOISTURE
SECTION 10 - INSULATION RESISTANCE AND ELECTRIC
             STRENGTH
SECTION 11 - CREEPAGE DISTANCES AND CLEARANCES
SECTION 12 - ENDURANCE TEST AND THERMAL TEST
SECTION 13 - RESISTANCE TO HEAT, FIRE AND TRACKING
SECTION 14 - SCREW TERMINALS
SECTION 15 - SCREWLESS TERMINALS AND ELECTRICAL
             CONNECTIONS
ANNEX A - TEST TO ESTABLISH WHETHER A CONDUCTIVE
          PART MAY CAUSE AN ELECTRIC SHOCK
ANNEX B - TEST LAMPS
ANNEX C - ABNORMAL CIRCUIT CONDITIONS
ANNEX D - DRAUGHT-PROOF ENCLOSURE
ANNEX E - DETERMINATION OF WINDING TEMPERATURE
          RISES BY THE INCREASE-IN-RESISTANCE METHOD
ANNEX F - TEST FOR RESISTANCE TO STRESS CORROSION
          OF COPPER AND COPPER ALLOYS
ANNEX G - Void
ANNEX H - Void
ANNEX J - EXPLANATION OF IP NUMBERS FOR DEGREES
          OF PROTECTION
ANNEX K - TEMPERATURE MEASUREMENT
ANNEX L - GUIDE TO GOOD PRACTICE IN LUMINAIRE DESIGN
ANNEX M - CONVERSATION GUIDE TO TABLE 11.1 -
          DETERMINATION OF CREEPAGE DISTANCES AND
          CLEARANCES
ANNEX N - EXPLANATION OF LUMINAIRES [Luminaire
          suitable for direct mounting on normally
          flammable surfaces] MARKING
ANNEX P - REQUIREMENTS FOR THE PROTECTIVE SHIELD
          TO BE FITTED TO LUMINAIRES USING METAL
          HANDLE LAMPS FOR PROTECTIVE MEASURES
          AGAINST UV RADIATION
ANNEX Q - CONFORMITY TESTING DURING MANUFACTURE
ANNEX R - SCHEDULE OF AMENDED CLAUSES CONTAINING
          MORE SERIOUS/CRITICAL REQUIREMENTS WHICH
          REQUIRE PRODUCTS TO BE RETESTED
ANNEX S - REQUIREMENTS FOR THE IDENTIFICATION OF
          A FAMILY OR RANGE OF LUMINAIRES FOR TYPE
          TESTING

Defines general requirements for luminaires, incorporating electric light source for operation from supply voltages up to 1100 V.

Committee	ETD 24
DocumentType	Standard
PublisherName	Bureau of Indian Standards
Status	Current

BIS SP 72 : 2010(R2014)	NATIONAL LIGHTING CODE 2010
BIS IS 10322-5-5 : 2013	LUMINAIRES - PART 5: PARTICULAR REQUIREMENTS - SECTION 5: FLOODLIGHTS
BIS IS 15967-1 : 2013	CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS - PART 1: SAFETY REQUIREMENTS
BIS IS/IEC 60079-15 : 2005	ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 15: CONSTRUCTION, TEST AND MARKING OF TYPE OF PROTECTION 'N' ELECTRICAL APPARATUS
BIS IS 15974 : 2013	AUXILIARIES FOR LAMPS STARTING DEVICES (OTHER THAN GLOW STARTERS) - PERFORMANCE REQUIREMENTS
BIS IS 10322-5-6 : 2013	LUMINAIRES - PART 5: PARTICULAR REQUIREMENTS - SECTION 6: HANDLAMPS
BIS IS 1258 : 2005(R2015)	BAYONET LAMP HOLDERS
BIS IS 302-1 : 2008 AMD 3 2014	SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 1: GENERAL REQUIREMENTS
BIS IS 10322-5-8 : 2013	LUMINAIRES - PART 5: PARTICULAR REQUIREMENTS - SECTION 8: EMERGENCY LIGHTING

BIS IS 9968-1 : 1988 AMD 3 2016	SPECIFICATION FOR ELASTOMER INSULATED CABLES - PART 1: FOR WORKING VOLTAGES UPTO AND INCLUDING 1100 VOLTS
BIS IS 12063 : 1987(R2004)	CLASSIFICATION OF DEGREES OF PROTECTION PROVIDED BY ENCLOSURES OF ELECTRICAL EQUIPMENT
BIS IS 616 : 2017	AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
BIS IS 9974-1 : 1981 AMD 4	HIGH PRESSURE SODIUM VAPOUR LAMPS - PART 1: GENERAL REQUIREMENTS AND TESTS
BIS IS 1271 : 2012	ELECTRICAL INSULATION - THERMAL EVALUATION AND DESIGNATION
ISO 75:1987	Plastics and ebonite Determination of temperature of deflection under load
BIS IS 1401 : 2008	PROTECTION OF PERSONS AND EQUIPMENT BY ENCLOSURES - PROBES FOR VERIFICATION
BIS SP 30 : 2011(R2016)	NATIONAL ELECTRICAL CODE
BIS IS 9000-7-1 TO 5 : 1979(R2004)	BASIC ENVIRONMENTAL TESTING PROCEDURES FOR ELECTRONIC AND ELECTRICAL ITEMS - PART 7: IMPACT TEST
BIS IS 3010-1 : 1965(R2004)	APPLIANCE-CONNECTORS AND APPLIANCE-INLETS (NON-REVERSIBLE THREE-PIN TYPE) - PART 1: APPLIANCE CONNECTORS
BIS IS 9974-2 : 1981(R2002)	HIGH PRESSURE SODIUM VAPOUR LAMPS - PART 2: STANDARD LAMP DATA SHEETS
BIS IS 1258 : 2005(R2015)	BAYONET LAMP HOLDERS
BIS IS 6616 : 1982(R2001)	BALLASTS FOR HIGH PRESSURE MERCURY VAPOUR LAMPS
BIS IS 15687-1 : 2006	SINGLE-CAPPED FLUORESCENT LAMPS - PART 1: SAFETY REQUIREMENTS
BIS IS 3323 : 1980(R2002)	BI-PIN LAMP HOLDERS FOR TUBULAR FLUORESCENT LAMPS
BIS IS 1293 : 2005 AMD 6 2013	PLUGS AND SOCKET-OUTLETS OF RATED VOLTAGE UP TO AND INCLUDING 250 VOLTS AND RATED CURRENT UP TO 16 AMPERES - SPECIFICATION
IEC 61031:1990	Design, location and application criteria for installed area gamma radiation dose rate monitoring equipment for use in nuclear power plants during normal operation and anticipated operational occurrences
BIS IS 11000-2-2 : 2008(R2015)	FIRE HAZARD TESTING - PART 2: TEST METHODS - SECTION 2: NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE
BIS IS 10322-5-4 : 1987(R2015)	LUMINAIRES - PART 5: PARTICULAR REQUIREMENTS - SECTION 4: PORTABLE GENERAL PURPOSE LUMINAIRES
BIS IS 694 : 2010(R2015)	POLYVINYL CHLORIDE INSULATED UNSHEATHED AND SHEATHED CABLES/CORDS WITH RIGID AND FLEXIBLE CONDUCTOR FOR RATED VOLTAGES UP TO AND INCLUDING 1100 V
BIS IS 3010-2 : 1965(R2004)	APPLIANCE-CONNECTORS AND APPLIANCE-INLETS (NON-REVERSIBLE THREE-PIN TYPE) - PART 2: APPLIANCE INLET
BIS IS 1416 : 1972(R2001)	SAFETY TRANSFORMERS
BIS IS 10276-2 : 1982(R2003)	EDISON SCREW LAMPHOLDERS - PART 2: STANDARD DATA SHEETS FOR LAMP HOLDERS AND GAUGES
BIS IS 15382-3 : 2006	INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 3: USE OF COATING POTTING OR MOULDING FOR PROTECTION AGAINST POLLUTION
BIS IS 15382-1 : 2014	INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
BIS IS 12948 : 1990(R2001)	TUNGSTEN HALOGEN LAMPS (NON-VEHICLE)
BIS IS 2824 : 2007	METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS
BIS IS 2215 : 2006(R2015)	STARTERS FOR FLUORESCENT LAMPS
BIS IS 5921-1 : 1993(R2002)	METAL-CLAD BASE MATERIALS FOR PRINTED CIRCUITS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TEST
BIS IS 15518-1 : 2004 AMD 1	SAFETY REQUIREMENTS FOR INCANDESCENT LAMPS - PART 1: TUNGSTEN FILAMENT LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES
BIS IS 11000-2-1 : 2008(R2015)	FIRE HAZARD TESTING - PART 2: TEST METHODS - SECTION 1: GLOW-WIRE APPARATUS AND COMMON TEST PROCEDURE
BIS IS QC 302400 : 1994(R2009)	FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT SECTIONAL SPECIFICATION FOR FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS
BIS IS 8913 : 1978(R2002)	METHODS OF MEASUREMENT OF LAMP CAP TEMPERATURE RISE