BS 493(1995) : 1995
Current
The latest, up-to-date edition.
SPECIFICATION FOR AIRBRICKS AND GRATINGS FOR WALL VENTILATION
Hardcopy , PDF
English
01-01-1995
Committees responsible
Foreword
1 Scope
2 References
3 Definitions
4 Materials
5 Manufacturer's certificate
6 Marking
7 Airbricks for external use (class 1 units)
8 Wall ventilators or gratings for internal
use (class 2 units)
Annex A (informative) - Information to be
supplied by the purchaser for the purpose of
an order or enquiry
Annex B (normative) - Test for impact resistance
of airbricks
List of references
Describes requirements for two classes of wall ventilating units as follows: class 1: airbricks for use in external walls; class 2: wall ventilators or gratings for internal use.
| Committee |
B/519
|
| DevelopmentNote |
Supersedes BS 493(1970) & 93/105570 DC. (07/2005) 1995 Edition Re-Issued in September 2010 & incorporates AMD 1 2010. Supersedes 10/30155844 DC. (09/2010)
|
| DocumentType |
Standard
|
| Pages |
12
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| S.R. 325:2013+A2:2018/AC:2019 | RECOMMENDATIONS FOR THE DESIGN OF MASONRY STRUCTURES IN IRELAND TO EUROCODE 6 |
| BS 5628-3:2005 | Code of practice for the use of masonry Materials and components, design and workmanship |
| PD 6697:2010 | Recommendations for the design of masonry structures to BS EN 1996-1-1 and BS EN 1996-2 |
| BS EN 1978:1998 | Copper and copper alloys. Copper cathodes |
| BS EN 12878:2014 | Pigments for the colouring of building materials based on cement and/or lime. Specifications and methods of test |
| BS 2782-3:Methods 320A to 320F:1976 | Methods of testing plastics. Mechanical properties Tensile strength, elongation and elastic modulus |
| BS EN 1676:2010 | Aluminium and aluminium alloys. Alloyed ingots for remelting. Specifications |
| BS 2782-5.550B(1996) : 1996 AMD 9494 | |
| BS EN 10048:1997 | Hot rolled narrow steel strip. Tolerances on dimensions and shape |
| BS EN ISO 877:1997 | Plastics. Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors. |
| BS EN ISO 9445-2:2010 | Continuously cold-rolled stainless steel. Tolerances on dimensions and form Wide strip and plate/sheet |
| BS EN 197-4:2004 | Cement Composition, specifications and conformity criteria for low early strength blastfurnace cements |
| BS 6610:1996 | Specification for Pozzolanic pulverized-fuel ash cement |
| BS EN 10095:1999 | Heat resisting steels and nickel alloys |
| BS EN 12620:2013 | Aggregates for concrete |
| ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
| BS EN 10051:2010 | Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels. Tolerances on dimensions and shape |
| BS EN 197-1:2011 | Cement Composition, specifications and conformity criteria for common cements |
| BS EN 10130:2006 | Cold rolled low carbon steel flat products for cold forming. Technical delivery conditions |
| BS EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles. Specifications and test methods |
| BS EN 1559-4:2015 | Founding. Technical conditions of delivery Additional requirements for aluminium alloy castings |
| BS 6954-2:1988 | Tolerances for building Recommendations for statistical basis for predicting fit between components having a normal distribution of sizes |
| ISO 9445-2:2009 | Continuously cold-rolled stainless steel — Tolerances on dimensions and form — Part 2: Wide strip and plate/sheet |
| BS EN 10346:2015 | Continuously hot-dip coated steel flat products for cold forming. Technical delivery conditions |
| BS EN 13279-1:2008 | Gypsum binders and gypsum plasters Definitions and requirements |
| BS EN 10029:2010 | Hot-rolled steel plates 3 mm thick or above. Tolerances on dimensions and shape |
| BS EN 1706:2010 | Aluminium and aluminium alloys. Castings. Chemical composition and mechanical properties |
| BS 1191-1:1973 | Specification for gypsum building plasters Excluding premixed lightweight plasters |
| BS EN ISO 9445-1:2010 | Continuously cold-rolled stainless steel. Tolerances on dimensions and form Narrow strip and cut lengths |
| ISO 9445-1:2009 | Continuously cold-rolled stainless steel — Tolerances on dimensions and form — Part 1: Narrow strip and cut lengths |
| BS EN 1976:2012 | Copper and copper alloys. Cast unwrought copper products |
| BS 4027:1996 | Specification for sulfate-resisting Portland cement |
| BS 6954-1:1988 | Tolerances for building Recommendations for basic principles for evaluation and specification |
| BS EN 1559-1:2011 | Founding. Technical conditions of delivery General |
| BS 6954-3:1988 | Tolerances for building Recommendations for selecting target size and predicting fit |
| BS 6750:1986 | Specification for modular coordination in building |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.