BS 903-0:2012
Current
Current
The latest, up-to-date edition.
Physical testing of rubber General
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
31-10-2012
Publisher
$380.41
Including GST where applicable
Foreword
1 Scope
2 Terms and definitions
3 Normative reference
4 Reproducibility
5 Test method categories and properties
6 Usage
7 Statistical analysis
8 Analysis of graphical traces
Annexes
Annex A (informative) - List of British Standard test
methods for the physical properties of rubber
Bibliography
Provides a range of laboratory-scale methods for the physical testing of rubber in raw, unvulcanized, vulcanized and thermoplastic forms.
| Committee |
PRI/22
|
| DevelopmentNote |
Supersedes BS 903-0(2003) & 11/30244285 DC. (10/2012)
|
| DocumentType |
Standard
|
| Pages |
18
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
This part of BS903 provides a general introduction to BS903 and to BS ISO standards. It describes a range of laboratory-scale methods for the physical testing of rubber in raw, unvulcanized, vulcanized and thermoplastic forms. A list of closely-related British Standards is also provided.
NOTE The status of methods referenced need to be verified with the relevant standards body; they are continually changing as new editions are issued and new methods appear, in line with developments in technology.
| BS ISO 289-4:2003 | Rubber, unvulcanized. Determinations using a shearing-disc viscometer Determination of the Mooney stress-relaxation rate |
| BS ISO 1382:2012 | Rubber. Vocabulary |
| BS ISO 4664-1:2011 | Rubber, vulcanized or thermoplastic. Determination of dynamic properties General guidance |
| ISO 1432:2013 | Rubber, vulcanized or thermoplastic — Determination of low-temperature stiffening (Gehman test) |
| BS ISO 188:2011 | Rubber, vulcanized or thermoplastic. Accelerated ageing and heat resistance tests |
| BS ISO 27727:2008 | Rubber, vulcanized. Measurement of fatigue crack growth rate |
| BS 903-A63:1995 | Physical testing of rubber Method for determination of crystallization effects by hardness measurements |
| BS ISO 7619-1:2010 | Rubber, vulcanized or thermoplastic. Determination of indentation hardness Durometer method (Shore hardness) |
| BS ISO 1817:2015 | Rubber, vulcanized or thermoplastic. Determination of the effect of liquids |
| BS ISO 815-1:2014 | Rubber, vulcanized or thermoplastic. Determination of compression set At ambient or elevated temperatures |
| BS ISO 8013:2012 | Rubber, vulcanized. Determination of creep in compression or shear |
| BS ISO 4649:2017 | Rubber, vulcanized or thermoplastic. Determination of abrasion resistance using a rotating cylindrical drum device |
| BS ISO 24453:2008 | Rubber. Acquisition and presentation of comparable single-point data |
| BS 903-A9:1988 | Physical testing of rubber Determination of abrasion resistance |
| BS ISO 4662:2017 | Rubber, vulcanized or thermoplastic. Determination of rebound resilience |
| BS ISO 4666-4:2007 | Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing Constant-stress flexometer |
| BS ISO 6505:2015 | Rubber, vulcanized or thermoplastic. Determination of tendency to adhere to and corrode metals |
| BS ISO 3417:2008 | Rubber. Measurement of vulcanization characteristics with the oscillating disc curemeter |
| BS ISO 4664-2:2006 | Rubber, vulcanized or thermoplastic. Determination of dynamic properties Torsion pendulum methods at low frequencies |
| BS ISO 3387:2012 | Rubber. Determination of crystallization effects by hardness measurements |
| BS ISO 5893:2002 | Rubber and plastics test equipment. Tensile, flexural and compression types (constant rate of traverse). Specification |
| BS 903-5:2004 | Physical testing of rubber Guide to the application of rubber testing to finite element analysis |
| BS ISO 15113:2005 | Rubber. Determination of frictional properties |
| BS ISO 2285:2013 | Rubber, vulcanized or thermoplastic. Determination of tension set underconstant elongation, and of tension set, elongation and creep underconstant tensile load |
| BS ISO 48:2010 | Rubber, vulcanized or thermoplastic. Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
| BS ISO 27588:2012 | Rubber, vulcanized or thermoplastic. Determination of dead-load hardness using the very low rubber hardness (VLRH) scale |
| BS ISO 4665:2016 | Rubber, vulcanized or thermoplastic. Resistance to weathering |
| BS ISO 23794:2015 | Rubber, vulcanized or thermoplastic. Abrasion testing. Guidance |
| BS 6716:1986 | Guide to properties and types of rubber |
| BS ISO 11345:2006 | Rubber. Assessment of carbon black and carbon black/silica dispersion. Rapid comparative methods |
| BS 903-A45(2000) : 2000 | RUBBER, VULCANIZED OR THERMOPLASTIC - RESISTANCE TO OZONE CRACKING - PART 3: REFERENCE AND ALTERNATIVE METHODS FOR DETERMINING THE OZONE CONCENTRATION IN LABORATORY TEST CHAMBERS |
| BS ISO 37:2011 | Rubber, vulcanized or thermoplastic. Determination of tensile stress-strain properties |
| BS ISO 289-1:2015 | Rubber, unvulcanized. Determinations using a shearing-disc viscometer Determination of Mooney viscosity |
| BS ISO 14309:2011 | Rubber, vulcanized or thermoplastic. Determination of volume and/or surface resistivity |
| BS ISO 34-2:2015 | Rubber, vulcanized or thermoplastic. Determination of tear strength Small (Delft) test pieces |
| BS ISO 23529:2016 | Rubber. General procedures for preparing and conditioning test pieces for physical test methods |
| BS ISO 1431-1:2012 | Rubber, vulcanized or thermoplastic. Resistance to ozone cracking Static and dynamic strain testing |
| BS EN 60243-2:2014 | Electric strength of insulating materials. Test methods Additional requirements for tests using direct voltage |
| BS ISO 36:2017 | Rubber, vulcanized or thermoplastic. Determination of adhesion to textile fabrics |
| BS ISO 4666-3:2016 | Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing Compression flexometer (constant-strain type) |
| BS ISO 6502:2016 | Rubber. Guide to the use of curemeters |
| PD ISO/TR 12134:2010 | Rubber. Estimation of uncertainty for test methods. Non-functional parameters |
| BS ISO 2781 : 2008 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF DENSITY |
| BS ISO 7619-2:2004 | Rubber, vulcanized or thermoplastic. Determination of indentation hardness IRHD pocket meter method |
| BS ISO 7743:2017 | Rubber, vulcanized or thermoplastic. Determination of compression stress-strain properties |
| BS ISO 815-2:2014 | Rubber, vulcanized or thermoplastic. Determination of compression set At low temperatures |
| BS EN ISO 6179:2017 | Rubber, vulcanized or thermoplastic. Rubber sheets and rubber-coated fabrics. Determination of transmission rate of volatile liquids (gravimetric technique) |
| BS ISO 9026:2007 | Raw rubber or unvulcanized compounds. Determination of green strength |
| BS ISO 18898:2016 | Rubber. Calibration and verification of hardness testers |
| BS ISO 2393:2014 | Rubber test mixes. Preparation, mixing and vulcanization. Equipment and procedures |
| BS ISO 24454:2008 | Rubber. Acquisition and presentation of comparable multi-point data |
| ISO 289-3:2015 | Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 3: Determination of the Delta Mooney value for non-pigmented, oil-extended emulsion-polymerized SBR |
| BS ISO 2782:2006 | Rubber, vulcanized or thermoplastic. Determination of permeability to gases |
| ISO 4637:1979 | Rubber-coated fabrics — Determination of rubber-to-fabric adhesion — Direct tension method |
| BS ISO 2921:2011 | Rubber, vulcanized. Determination of low-temperature retraction (TR test) |
| BS ISO 1827:2016 | Rubber, vulcanized or thermoplastic. Determination of shear modulus and adhesion to rigid plates. Quadruple-shear methods |
| BS ISO 812:2017 | Rubber, vulcanized or thermoplastic. Determination of low-temperature brittleness |
| BS 903-A60.1:2000 | Physical testing of rubber. Curemetering Guide to the use of curemeters |
| BS ISO 5600:2017 | Rubber. Determination of adhesion to rigid materials using conical shaped parts |
| BS 903-1:1995 | Physical testing of rubber Guide to the selection and use of methods of test for rubber |
| BS ISO 6943:2017 | Rubber, vulcanized. Determination of tension fatigue |
| BS 903-A27:1986 | Physical testing of rubber Determination of rubber to fabric adhesion. Direct tension method |
| BS ISO 6914:2013 | Rubber, vulcanized or thermoplastic. Determination of ageing characteristics by measurement of stress relaxation in tension |
| BS ISO 1795:2017 | Rubber, raw natural and raw synthetic. Sampling and further preparative procedures |
| BS ISO 19003:2006 | Rubber and rubber products. Guidance on the application of statistics to physical testing |
| BS ISO 5603:2017 | Rubber, vulcanized. Determination of adhesion to wire cord |
| BS ISO 4647:2010 | Rubber, vulcanized. Determination of static adhesion to textile cord. H-pull test |
| BS 903-A18:1973 | Physical testing of rubber Determination of equilibrium water vapour absorption |
| BS ISO 4666-1:2010 | Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing Basic principles |
| BS ISO 13226:2011 | Rubber. Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers |
| BS 903-A58.1:2001 | Physical testing of rubber Methods using the Mooney viscometer. Determination of the Delta Mooney value for non-pigmented, oil-extended, emulsion-polymerized SBR - Determination of the Delta Mooney value for non-pigmented,oil-extended, emulsion-polymerized SBR |
| BS ISO 12493:2017 | Rubber, vulcanized. Determination of stress in tension upon heating |
| BS ISO 18517:2015 | Rubber, vulcanized or thermoplastic. Hardness testing. Introduction and guide |
| BS ISO 34-1:2015 | Rubber, vulcanized or thermoplastic. Determination of tear strength Trouser, angle and crescent test pieces |
| ISO 3387:2012 | Rubber — Determination of crystallization effects by hardness measurements |
| BS ISO 1853:2011 | Conducting and dissipative rubbers, vulcanized or thermoplastic. Measurement of resistivity |
| BS ISO 2007:2007 | Rubber, unvulcanized. Determination of plasticity. Rapid-plastimeter method |
| BS ISO 2878:2017 | Rubber, vulcanized or thermoplastic. Antistatic and conductive products. Determination of electrical resistance |
| BS ISO 132:2011 | Rubber, vulcanized or thermoplastic. Determination of flex cracking and crack growth (De Mattia) |
| BS ISO 813:2016 | Rubber, vulcanized or thermoplastic. Determination of adhesion to a rigid substrate. 90° peel method |
| BS ISO 814:2017 | Rubber, vulcanized or thermoplastic. Determination of adhesion to metal. Two-plate method |
| ISO/TR 9272:2005 | Rubber and rubber products — Determination of precision for test method standards |
| BS ISO 1431-3:2017 | Rubber, vulcanized or thermoplastic. Resistance to ozone cracking Reference and alternative methods for determining the ozone concentration in laboratory test chambers |
| BS ISO 3384-1 : 2011 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF STRESS RELAXATIONIN COMPRESSION - PART 1: TESTING AT CONSTANT TEMPERATURE |
| BS ISO 6133:2015 | Rubber and plastics. Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength |
| BS ISO 2930:2017 | Rubber, raw natural. Determination of plasticity retention index (PRI) |
| ISO/TR 11753:1992 | Rubber and rubber products — Confidence intervals of repeatability and reproducibility values determined by inter-laboratory tests |
| BS ISO 3865:2005 | Rubber, vulcanized or thermoplastic. Methods of test for staining in contact with organic material |
Summarise
$380.41
Including GST where applicable
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.