BS AU 50-3.1e:2004
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Tyres and wheels. Valves Dimensions, designation, valve pressure ratings by use and torque for clamp-in valves
Hardcopy , PDF
English
26-11-2004
23-11-2012
1 Scope
2 Tubeless valves only
2.1 Snap-in valves
2.1.1 Valve hole 11,3 [+0,4/0]
2.1.2 Valve hole 15,7 [+0,4/0]
2.2 Clamp-in valves
2.2.1 Clamp-in valves with O-ring
2.2.2 Clamp-in valves with grommet
3 Valves for tube only
3.1 Rubber covered valves
3.1.1 Valve hole 8,3 [+0,3/0]
3.1.2 Valve hole 11,3 [+0,4/0]
3.1.3 Valve hole 15,7 [+0,4/0]
3.2 Rubber base valves
3.2.1 Valve hole 6,2
3.2.2 Rim slot 12,5 [+2/0] and 14 [+3/0]
3.2.3 Valve hole 12,5 [+0,4/0]
3.2.4 Valve hole 15,7 [+0,4/0]
3.3 Rubber semi-covered base valve - Valve hole
10,2 [+0,3/0] or 11,3 [+0,4/0]
3.4 Screw-on universal valve 12,5 [+2/0] and 14 [+3/0]
3.5 Large bore valves - Rim slot 19 [+3/0] - (Valve
body used for tubeless, valve hole 20,5 [+0,5/0])
3.6 Metalbase valve
3.6.1 Valve hole 6,2
3.6.2 Valve hole 8,3
4 Spuds, valve bodies and adaptors
4.1 Rubber spuds
4.1.1 Spuds for screw-on universal valves - Rim
slot 12,5 [+2/0] and 15 [+2/0]
4.1.2 Rubber covered air/liquid spuds - Valve hole
15,7 [+0,4/0]
4.1.3 Screw-on large bore spuds - Valve hole 20,5
[+0,5/0] and rim slot 19 [+3/0] mm
4.2 Clamp-in spuds
4.2.1 Air/liquid large bore spud - Valve hole 15,7
[+0,4/0]
4.2.2 Valve hole 20,5 [+0,5/0]
4.3 Valve body and core housing
4.3.1 Tubeless and tube type core housing for spuds
with valve hole 15,7 [+0,4/0]
4.3.2 Large and super large bore valve body for
spuds with valve hole 20,5 [+0,5/0]
4.4 Adaptors
4.4.1 Straight adaptor
4.4.2 Bent adaptor
5 Valve components
5.1 O-Rings
5.2 Ring washers
5.3 Hex nuts
5.4 Knurled nuts, hex nuts, screw
5.5 Rubber grommets
5.6 Valve caps
5.7 Valve core
5.7.1 For ISO core chamber No. 1
5.7.2 For ISO core chamber No. 2
Annex A (normative) Valves and valve components for tyres -
Identification system
Annex B (normative) Correspondence between ISO designations
and other designations
Annex C (informative) Valves using ISO core chamber No. 3
Annex D (normative) Valve pressure ratings by use
Annex E (normative) Torque for clamp-in-valves - ISO designations
Bibliography
Defines the essential dimensions and the designation of tube valves and tubeless valves.
| Committee |
AUE/4
|
| DevelopmentNote |
Renumbers and supersedes BS AU 50-3.1D(2002). 2004 Version incorporates amendment 15365 to BS AU 50-3.1D(2002). Supersedes 02/707811 DC, 98/713113 DC and BS AU 50-3.1C(2001). Also numbered as ISO 9413. (11/2004)
|
| DocumentType |
Standard
|
| Pages |
110
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ISO 9413:1998/Amd 2:2004 | Identical |
| ISO 3877-2:1997 | Tyres, valves and tubes — List of equivalent terms — Part 2: Tyre valves |
| ISO 10475:1992 | Valves for tubeless tyres and valves for tubes — Identification system for valves and their components |
| ISO 6762:1982 | Tyre valves — ISO core chamber No. 2 |
| ISO 4570-3:1980 | Tyre valve threads — Part 3: Threads 8V2, 10V1, 11V1, 13V2, 15V1, 16V1, 17V1, 17V2, 17V3, 19V1, 20V1 |
| ISO 4570-2:1979 | Tyre valve threads — Part 2: Threads 9V1, 10V2, 12V1, 13V1 |
| ISO 7442:1982 | Tyre valves — ISO core chamber No. 1 |
| ISO 4570-1:1977 | Tyre valve threads — Part 1: Threads 5V1, 5V2, 6V1 and 8V1 |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.