Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

BS EN 10143:2006

Current
Current

The latest, up-to-date edition.

Continuously hot-dip coated steel sheet and strip. Tolerances on dimensions and shape
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

31-07-2006

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Designation
5 Condition of delivery
6 Tolerances on thickness
7 Tolerances on width
   7.1 General
   7.2 Sheet and wide strip of width >= 600 mm
   7.3 Slit wide strip of width less than 600 mm
8 Tolerances on length
9 Tolerances on flatness
   9.1 Steel grades with specified minimum R[e] or R[p0,2] < 360 MPa
   9.2 Steel grades with specified minimum R[p0,2] >= 360 MPa
10 Tolerances on out-of-squareness
11 Tolerances on edge camber
12 Superimposition of dimensions
Bibliography

Applies to continuously zinc (Z), zinc-iron alloy (ZF), zinc-aluminium alloy (ZA), aluminium-zinc alloy (AZ) and aluminium-silicon alloy (AS) hot-dip coated flat products made of low carbon and high strength steels for cold forming and of structural steels with a minimum thickness of 0,20 mm and a maximum thickness of 6,50 mm.

Committee
ISE/109
DevelopmentNote
Supersedes BS 2989(1992) and 91/43188 DC. (07/2005) Supersedes 04/30117571 DC (07/2006)
DocumentType
Standard
Pages
18
PublisherName
British Standards Institution
Status
Current
Supersedes

Standards Relationship
SN EN 10143 : 2006 Identical
NBN EN 10143 : 2006 Identical
EN 10143:2006 (edition 2) Identical
UNI EN 10143 : 2006 Identical
I.S. EN 10143:2006 Identical
NF EN 10143 : 2006 Identical
NEN EN 10143 : 2006 Identical
UNE-EN 10143:2007 Identical
NS EN 10143 : 2ED 2006 Identical

05/30131954 DC : DRAFT APR 2005 BS 5628-3 - CODE OF PRACTICE FOR THE USE OF MASONRY - PART 3: MATERIALS AND COMPONENTS, DESIGN AND WORKMANSHIP
15/30095322 DC : 0 BS 5427 - CODE OF PRACTICE FOR THE USE OF PROFILED SHEET FOR ROOF AND WALL CLADDING ON BUILDINGS
BS 8525-1:2010 Greywater systems Code of practice
BS 5516-1:2004 Patent glazing and sloping glazing for buildings Code of practice for design and installation of sloping and vertical patent glazing
08/30171875 DC : DRAFT JUNE 2008 BS 8515 - CODE OF PRACTICE FOR RAINWATER HARVESTING SYSTEMS
BS 5502-50(1993) : 1993 BUILDINGS AND STRUCTURES FOR AGRICULTURE - PART 50: CODE OF PRACTICE FOR DESIGN, CONSTRUCTION AND USE OF STORAGE TANKS AND RECEPTION PITS FOR LIVESTOCK SLURRY
BS 5502-22:1993 Buildings and structures for agriculture Code of practice for design, construction and loading
BS 5502-21:1990 Buildings and structures for agriculture Code of practice for selection and use of construction materials
BS 8515(2009) : 2009 RAINWATER HARVESTING SYSTEMS - CODE OF PRACTICE
BS 5628-3:2001 Code of practice for use of masonry Materials and components, design and workmanship
BS 5991:2006 Specification for indirect gas fired forced convection air heaters with rated heat inputs greater than 330 kW but not exceeding 2 MW for industrial and commercial space heating. Safety and performance requirements (excluding electrical requirements) (2nd family gases)
BS 6180:1999 Barriers in and about buildings. Code of practice
BS 4592-3:2006 Industrial type flooring and stair treads Cold formed metal planks. Specification
BS 2482:2009 Specification for timber scaffold boards
BS 6180:2011 Barriers in and about buildings. Code of practice
BS 5990:2006 Specification for direct gas-fired forced convection air heaters with rated heat inputs greater than 330 kW but not exceeding 2 MW for industrial and commercial space heating. Safety and performance requirements (excluding electrical requirements) (2nd family gases)
BS 4008:2006 Specification for cattle grids
BS 6180:1995 Code of practice for barriers in and about buildings
08/30113948 DC : 0 BS 2482 - SPECIFICATION FOR TIMBER SCAFFOLD BOARDS
05/30095368 DC : DRAFT FEB 2005 BS 6150 - PAINTING OF BUILDINGS - CODE OF PRACTICE
06/30094364 DC : DRAFT JAN 2006 BS 4592-3 - INDUSTRIAL TYPE FLOORING AND STAIR TREADS - PART 3: COLD FORMED METAL PLANKS - SPECIFICATION
09/30184122 DC : 0 BS 8525-1 - GREYWATER SYSTEMS - PART 1: CODE OF PRACTICE
10/30212801 DC : 0 BS 6180 - BARRIERS IN AND ABOUT BUILDINGS - CODE OF PRACTICE
DEFSTAN 03-32(PT4)/3(2002) : 2002 PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 4: SYSTEMS FOR FERROUS METAL, EXCLUDING ARMOUR

EN 10051:2010 Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape
EN 10079:2007 Definition of steel products
EN 10131:2006 (edition 2) Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape
EN 10327:2004 Continuously hot-dip coated strip and sheet of low carbon steels for cold forming - Technical delivery conditions
EN 10326:2004 Continuously hot-dip coated strip and sheet of structural steels - Technical delivery conditions
EN 10292:2007 Continuously hot-dip coated strip and sheet of steels with high yield strength for cold forming - Technical delivery conditions

View more information
$294.12
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more