Customer Support: 131 242

  • Shopping Cart
    There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

BS EN 13986 : 2004

Current

Current

The latest, up-to-date edition.

WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2004

$641.66
Including GST where applicable

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Performance characteristics required for wood-based
  panels for use in construction
5 Determination of the performance characteristics
6 Assessment and verification of constancy of
  performance - AVCP
7 Marking
Annex A (normative) - Technical classes for wood-based
         panels
Annex B (normative) - Formaldehyde classes
Annex ZA (informative) - Clauses of this European
         Standard addressing the provisions of the EU
         Construction Products Regulation
Bibliography

Describes wood-based panels for use in construction and specifies the relevant characteristics and the appropriate test methods to determine these characteristics for wood-based panels, unfaced, overlaid, veneered or coated.

Committee
B/541
DevelopmentNote
Supersedes 00/107872 DC (09/2002) 2004 Edition Re-Issued in May 2015 & incorporates AMD 1 2015. (05/2015)
DocumentType
Standard
Pages
72
PublisherName
British Standards Institution
Status
Current
Supersedes

12/30263952 DC : 0 BS EN 61048:2006+A1 - AUXILIARIES FOR LAMPS - CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS - GENERAL AND SAFETY REQUIREMENTS
14/30277336 DC : 0 BS 8605-1 - EXTERNAL TIMBER CLADDING - PART 1: METHOD OF SPECIFYING
08/30143158 DC : DRAFT AUG 2008 BS 644 - TIMBER WINDOWS - FULLY FINISHED FACTORY ASSEMBLED WINDOWS OF VARIOUS TYPES - SPECIFICATION
08/30140202 DC : 0 BS 8103-3 - STRUCTURAL DESIGN OF LOW-RISE BUILDINGS - PART 3: CODE OF PRACTICE FOR TIMBER FLOORS AND ROOFS FOR HOUSING
BS 8203:2017 Code of practice for installation of resilient floor coverings
BS 8203(2001) : 2001 CODE OF PRACTICE FOR INSTALLATION OF RESILIENT FLOOR COVERINGS
BS 5385-3:2014 Wall and floor tiling Design and installation of internal and external ceramic and mosaic floor tiling in normal conditions. Code of practice
BS 1088-1:2003 Marine plywood Requirements
BS 8605-1:2014 External timber cladding Method of specifying
BS 644:2012 Timber windows and doorsets. Fully finished factory-assembled windows and doorsets of various types. Specification
BS 644:2009 Timber windows. Fully finished factory-assembled windows of various types. Specification
BS 8103-3:2009 Structural design of low-rise buildings Code of practice for timber floors and roofs for housing
BS 8201:2011 Code of practice for installation of flooring of wood and wood-based panels
12/30254626 DC : 0 PD 6693-1 - RECOMMENDATIONS FOR THE DESIGN OF STRUCTURES TO BS EN 1995 EUROCODE 5 FOR TIMBER STRUCTURES (REVISION OF BS 5268)
11/30209204 DC : 0 BS 8201 - CODE OF PRACTICE FOR INSTALLATION OF FLOORING OF WOOD AND WOOD-BASED PANELS
14/30283603 DC : 0 BS 5385-3 - WALL AND FLOOR TILING - PART 3: DESIGN AND INSTALLATION OF INTERNAL ANDEXTERNAL CERAMIC AND MOSAIC FLOOR TILING IN NORMAL CONDITIONS - CODE OF PRACTICE
12/30218393 DC : 0 BS 644 - TIMBER WINDOWS AND DOORSETS - FULLY FINISHED FACTORY-ASSEMBLED WINDOWS AND DOORSETS OF VARIOUS TYPES - SPECIFICATION
BS 6100-8:2007 Building and civil engineering. Vocabulary Work with timber and wood-based panels
09/30174199 DC : 0 BS 8203:2001+A1:2009 - CODE OF PRACTICE FOR INSTALLATION OF RESILIENT FLOOR COVERINGS
BIP 2198:2012 Concise Eurocode for design of timber structures BS EN 1995: Eurocodes 5
PD 6693-1:2012 Recommendations for the design of timber structures to Eurocode 5: Design of timber structures General. Common rules and rules for buildings
16/30348805 DC : 0 BS 8203 - CODE OF PRACTICE FOR INSTALLATION OF RESILIENT FLOOR COVERINGS

EN 13353:2008+A1:2011 Solid wood panels (SWP) - Requirements
EN 321:2001 Wood-based panels - Determination of moisture resistance under cyclic test conditions
EN 634-1:1995 Cement-bonded particleboards - Specification - Part 1: General requirements
EN 335-2:2006 Durability of wood and wood-based products - Definition of use classes - Part 2: Application to solid wood
EN 319:1993 Particleboards and fibreboards - Determination of tensile strength perpendicular to the plane of the board
EN 120:1992 Wood based panels - Determination of formaldehyde content - Extraction method called the perforator method
ISO 354:2003 Acoustics — Measurement of sound absorption in a reverberation room
EN 310:1993 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
EN 1087-1:1995 Particleboards - Determination of moisture resistance - Part 1: Boil test
EN 326-1:1994 Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results
EN 14755:2005 Extruded particleboards - Specifications
EN 326-2:2010+A1:2014 Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control
EN 14279:2004+A1:2009 Laminated Veneer Lumber (LVL) - Definitions, classification and specifications
89/106/EEC : 1988 COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS
CEN/TS 13354 : 2003 SOLID WOOD PANELS - BONDING QUALITY - TEST METHOD
EN 596:1995 Timber structures - Test methods - Soft body impact test of timber framed walls
EN 317:1993 Particleboards and fibreboards - Determination of swelling in thickness after immersion in water
EN 1058:2009 Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values
EN 300:2006 Oriented Strand Boards (OSB) - Definitions, classification and specifications
EN 1195:1997 Timber structures - Test methods - Performance of structural floor decking
EN 717-1:2004 Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method
EN 1156:2013 Wood-based panels - Determination of duration of load and creep factors
EN 312:2010 Particleboards - Specifications
EN 622-5:2009 Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF)
EN 789:2004 Timber structures - Test methods - Determination of mechanical properties of wood based panels
EN 12114:2000 Thermal performance of buildings - Air permeability of building components and building elements - Laboratory test method
EN 12524 : 2000 BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES
EN 594:2011 Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels
EN 325:2012 Wood-based panels - Determination of dimensions of test pieces
ISO 12572:2016 Hygrothermal performance of building materials and products — Determination of water vapour transmission properties — Cup method
EN ISO 12572:2016 Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method (ISO 12572:2016)
EN 323:1993 Wood-based panels - Determination of density
EN 12369-1:2001 Wood-based panels - Characteristic values for structural design - Part 1: OSB, particleboards and fibreboards
EN ISO 354:2003 Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003)
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
EN 12664:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance
EN 15197:2007 Wood-based panels - Flaxboards - Specifications
EN 335-3:1995 Durability of wood and wood-based products - Definition of hazard classes of biological attack - Part 3: Application to wood-based panels
ISO 9001:2015 Quality management systems — Requirements
ENV 1099 : DRAFT 97 PLYWOOD - BIOLOGICAL DURABILITY - GUIDANCE FOR THE ASSESSMENT OF PLYWOOD FOR USE IN DIFFERENT HAZARD CLASSES
EN 622-3:2004 Fibreboards - Specifications - Part 3: Requirements for medium boards
EN 316:2009 Wood fibre boards - Definition, classification and symbols
EN 622-4:2009 Fibreboards - Specifications - Part 4: Requirements for softboards
EN 313-2:1999 Plywood - Classification and terminology - Part 2: Terminology
EN 314-2:1993 Plywood - Bonding quality - Part 2: Requirements
EN 633:1993 Cement-bonded particleboards - Definition and classification
EN 12871:2013 Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls
EN 634-2:2007 Cement-bonded particleboards - Specifications - Part 2: Requirements for OPC bonded particleboards for use in dry, humid and external conditions
CEN/TR 14823:2003 Durability of wood and wood-based products - Quantitative determination of pentachlorophenol in wood - Gas chromatographic method
EN 383:2007 Timber Structures - Test methods - Determination of embedment strength and foundation values for dowel type fasteners
EN 309:2005 Particleboards - Definition and classification
EN 12369-2:2011 Wood-based panels - Characteristic values for structural design - Part 2: Plywood
EN 335-1:2006 Durability of wood and wood- based products - Definition of use classes - Part 1: General
EN 12775:2001 Solid wood panels - Classification and terminology
EN 636:2012+A1:2015 Plywood - Specifications
EN 622-1:2003 Fibreboards - Specifications - Part 1: General requirements
CEN/TR 12872:2014 Wood-based panels - Guidance on the use of load-bearing boards in floors, walls and roofs
EN 314-1:2004 Plywood - Bonding quality - Part 1: Test methods

$641.66
Including GST where applicable