BS EN 55016-1-4 : 2010
Current
The latest, up-to-date edition.
SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-4: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - ANTENNAS AND TEST SITES FOR RADIATED DISTURBANCE MEASUREMENTS (CISPR 16-1-4:2010/A2:2017)
Hardcopy , PDF
English
01-01-2010
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 Antennas for measurement of radiated radio disturbance
5 Test sites for measurement of radio disturbance field strength
for the frequency range of 30 MHz to 1000 MHz
6 Reverberating chamber for total radiated power measurement
7 TEM cells for immunity to radiated disturbance measurement
8 Test sites for measurement of radio disturbance field strength
for the frequency range 1 GHz to 18 GHz
9 Common mode absorption devices
Annex A (normative) - Parameters of antennas
Annex B (normative) - Monopole (1 m rod) antenna performance
equations and characterization of the associated antenna
matching network
Annex C (normative) - Loop antenna system for magnetic field
induced-current measurements in the frequency range of 9
kHz to 30 MHz
Annex D (normative) - Construction details for open area test
sites in the frequency range of 30 MHz to 1000 MHz
Annex E - Void
Annex F (informative) - Basis for 4 dB site acceptability
criterion
Annex G (informative) - Examples of uncertainty budgets
for site validation of a COMTS using RSM with a
calibrated antenna pair
Bibliography
Annex ZA (normative) - Normative references to international
publications with their corresponding European
publications`
Describes the characteristics and performance of equipment for the measurement of radiated disturbances in the frequency range 9 kHz to 18 GHz.
| Committee |
GEL/210/11
|
| DevelopmentNote |
Together with BS EN 55016-1-1, BS EN 55016-1-2, BS EN 55016-1-3 and BS EN 55016-1-5 it supersedes BS CISPR 16-1(1999). (01/2005) Supersedes 00/241069 DC and 02/208872 DC. (05/2006) Supersedes 06/30153102 DC. (08/2007) Supersedes 04/30126015 DC. (06/2008) Supersedes 08/30176257 DC. (07/2010) 2010 + A1 2012 Edition remains current and will be withdrawn on 23/02/2020. 2010 Edition Re-Issued in April 2018 & incorporates AMD 2 2017. Supersedes 14/30309620 DC.(05/2018)
|
| DocumentType |
Standard
|
| Pages |
128
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| I.S. EN 55016-1-4:2010 | Identical |
| EN 55016-1-4:2010/A2:2017 | Identical |
| CISPR 16-1-4:2010+AMD1:2012+AMD2:2017 CSV | Identical |
| NEN EN 55016-1-4 : 2010 AMD 2 2017 | Identical |
| NF EN 55016-1-4 : 2010 AMD 2 2017 | Identical |
| DIN EN 55016-1-4 : 2013 | Identical |
| EN 55016-1-4:2010 | Equivalent |
| UNE-EN 55016-1-4:2011 | Identical |
| DEFSTAN 59-411(PT1)/2(2014) : 2014 | ELECTROMAGNETIC COMPATIBILITY - PART 1: MANAGEMENT AND PLANNING |
| DEFSTAN 59-411(PT1)/1(2007) : 2007 | ELECTROMAGNETIC COMPATIBILITY - PART 1: MANAGEMENT AND PLANNING |
| EN 55016-1-6:2015/A1:2017 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-6: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - EMC ANTENNA CALIBRATION (CISPR 16-1-6:2014/A1:2017) |
| CLC/TR 50484:2009 | Recommendations for shielded enclosures |
| IEC 61169-8:2007 | Radio-frequency connectors - Part 8: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock - Characteristic impedance 50 Ω (type BNC) |
| CISPR 16-4-2:2011+AMD1:2014 CSV | Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty |
| EN 55016-2-3:2017 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements |
| CISPR 16-1-1:2015 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus |
| CISPR 16-1-5:2014+AMD1:2016 CSV | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration sites and reference test sites for 5 MHz to 18 GHz |
| EN 55016-1-5:2015/A1:2017 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-5: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - ANTENNA CALIBRATION SITES AND REFERENCE TEST SITES FOR 5 MHZ TO 18 GHZ (CISPR 16-1-5:2014/A1:2016) |
| MIL-STD-461 Revision G:2015 | Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment |
| IEC 61000-4-20:2010 | Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides |
| CISPR 16-2-3:2016 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements |
| ANSI C63.5 : 2006 | ELECTROMAGNETIC COMPATIBILITY - RADIATED EMISSION MEASUREMENTS IN ELECTROMAGNETIC INTERFERENCE (EMI) CONTROL - CALIBRATION AND QUALIFICATION OF ANTENNAS (9 KHZ TO 40 GHZ) |
| EN 61000-4-20:2010 | Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides |
| CLC/TR 50481:2009 | Recommendations on filters for shielded enclosures |
| EN 55016-1-1:2010/A2:2014 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-1: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - MEASURING APPARATUS (CISPR 16-1-1:2010/A2:2014) |
| CISPR TR 16-3:2010+AMD1:2012+AMD2:2015 CSV | Specification for radio disturbance and immunity measuring apparatus and methods - Part 3: CISPR technical reports |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.