BS EN ISO 3747:2010
Current
The latest, up-to-date edition.
Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering/survey methods for use in situ in a reverberant environment
Hardcopy , PDF
English
31-01-2011
| Committee |
EH/1/4
|
| DevelopmentNote |
Supersedes BS 4196-7(1988). (07/2000) Supersedes 98/561202 DC. (10/2005) Supersedes 08/30192545 DC. (04/2010) Supersedes 07/30094858 DC. (01/2011)
|
| DocumentType |
Standard
|
| Pages |
54
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
1.1 General
This International Standard specifies a method for determining the sound power level or sound energy level of a noise source by comparing measured sound pressure levels emitted by a noise source (machinery or equipment) mounted in situ in a reverberant environment, with those from a calibrated reference sound source. The sound power level (or, in the case of noise bursts or transient noise emission, the sound energy level) produced by the noise source, in frequency bands of width one octave, is calculated using those measurements. The sound power level or sound energy level with frequency A-weighting applied is calculated using the octave-band levels.
1.2 Types of noise and noise sources
The method specified in this International Standard is suitable for all types of noise (steady, non-steady, fluctuating, isolated bursts of sound energy, etc.) defined in ISO 12001. The method is primarily applicable to sources which emit broad-band noise. It can, however, also be used for sources which emit narrow-band noise or discrete tones, although there is a possibility that the measurement reproducibility is then degraded.
The noise source under test can be a device, machine, component or sub-assembly, especially one which is non-movable.
1.3 Test environment
The test environment that is applicable for measurements made in accordance with this International Standard is a room where the sound pressure level at the microphone positions depends mainly on reflections from the room surfaces (see 4.1). In measurements of ISO 12001:1996, accuracy grade 2 (engineering grade), background noise in the test environment is low compared to that of the noise source or reference sound source (see 4.2).
1.4 Measurement uncertainty
Information is given on the uncertainty of the sound power levels and sound energy levels determined in accordance with this International Standard, for measurements made in octave bands and for A-weighted frequency calculations performed on them. The uncertainty conforms with that of either ISO 12001:1996, accuracy grade 2 (engineering grade) or ISO 12001:1996, accuracy grade 3 (survey grade), depending on the extent to which the requirements concerning the test environment are met.
| Standards | Relationship |
| I.S. EN ISO 3747:2010 | Identical |
| ISO 3747:2010 | Identical |
| NS EN ISO 3747 : 2010 | Identical |
| NF EN ISO 3747 : 2011 | Identical |
| DIN EN ISO 3747:2011-03 | Identical |
| NEN EN ISO 3747 : 2010 | Identical |
| EN ISO 3747:2010 | Identical |
| NBN EN ISO 3747 : 2011 | Identical |
| UNE-EN ISO 3747:2010 | Identical |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.