BS ISO/IEC 18000-3:2010
Current
The latest, up-to-date edition.
Information technology. Radio frequency identification for item management Parameters for air interface communications at 13,56 MHz
Hardcopy , PDF
English
30-11-2010
Foreword
Introduction
1 Scope
2 Conformance
3 Normative references
4 Terms and definitions
5 Symbols and abbreviated terms
6 Requirements: Physical layer, collision management
system and protocol values for 13,56 MHz systems
7 Marking of equipment
Annex A (informative) - MODE 1: mandatory and optional
commands required to support the ISO/IEC 15962
data protocol
Annex B (informative) - MODE 2 and MODE 3: Phase Jitter
Modulation
Annex C (normative) - MODE3: State transition tables
Annex D (normative) - MODE 3: Command Response Tables
Annex E (normative) - MODE 3: Error codes
Annex F (normative) - MODE 3: Slot counter
Annex G (informative) - MODE 3: Example slot-count (Q)
selection algorithm
Annex H (informative) - MODE 3: Example of tag inventory
and access
Annex I (informative) - MODE 3: Calculation of 5-bit and
16-bit cyclic redundancy checks
Annex J (informative) - MODE 3: ASK Method:
Interrogator-to-tag link modulation
Annex K (informative) - MODE 3: Example data flow exchange
Annex L (informative) - MODE 3: Tag Features
Annex M (informative) - Cyclic Redundancy Check (CRC) (16 bit)
Annex N (informative) - Cyclic redundancy check (CRC) mode 2
(32 bit)
Annex O (informative) - Known possible interferences between
the MODES determined in this part of ISO/IEC 18000
Bibliography
Specifies physical layer, collision management system and protocol values for RFID systems for item identification operating at 13,56 MHz in accordance with the requirements of ISO/IEC 18000-1.
| Committee |
IST/6
|
| DevelopmentNote |
Supersedes 02/653202 DC. (12/2004) Supersedes 09/30189756 DC. (12/2010)
|
| DocumentType |
Standard
|
| Pages |
178
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This part of ISO/IEC18000 provides physical layer, collision management system and protocol values for RFID systems for item identification operating at 13,56MHz in accordance with the requirements of ISO/IEC18000-1.
This part of ISO/IEC18000 provides definitions for systems for each MODE determined in Clause6 below.
This part of ISO/IEC18000 defines three non-interfering MODES.
-
The MODES are not interoperable.
-
The MODES, whilst not interoperable, are non-interfering.
| Standards | Relationship |
| ISO/IEC 18000-3:2010 | Identical |
| ISO/IEC 15962:2013 | Information technology — Radio frequency identification (RFID) for item management — Data protocol: data encoding rules and logical memory functions |
| ISO/IEC 7816-6:2016 | Identification cards — Integrated circuit cards — Part 6: Interindustry data elements for interchange |
| ISO/IEC TR 18047-3:2011 | Information technology — Radio frequency identification device conformance test methods — Part 3: Test methods for air interface communications at 13,56 MHz |
| ISO/IEC 18000-6:2013 | Information technology — Radio frequency identification for item management — Part 6: Parameters for air interface communications at 860 MHz to 960 MHz General |
| ISO/IEC 15963:2009 | Information technology — Radio frequency identification for item management — Unique identification for RF tags |
| ISO/IEC 15961:2004 | Information technology — Radio frequency identification (RFID) for item management — Data protocol: application interface |
| CFR 47(PTS0-19) : OCT 2017 | TELECOMMUNICATION - FEDERAL COMMUNICATIONS COMMISSION |
| ISO/IEC 10373-7:2008 | Identification cards — Test methods — Part 7: Vicinity cards |
| ISO/IEC 13239:2002 | Information technology — Telecommunications and information exchange between systems — High-level data link control (HDLC) procedures |
| ISO/IEC TR 18046:2005 | Information technology — Automatic identification and data capture techniques — Radio frequency identification device performance test methods |
| ETSI EN 300 220-2 V2.4.1 (2012-05) | Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 25 MHz to 1 000 MHz frequency range with power levels ranging up to 500 mW; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive |
| ETSI EN 300 220-1 V2.4.1 (2012-05) | Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 25 MHz to 1 000 MHz frequency range with power levels ranging up to 500 mW; Part 1: Technical characteristics and test methods |
| ETSI EN 300 330 V1.2.2 (1999-05) | ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Short Range Devices (SRD); Technical characteristics and test methods for radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz |
| ISO/IEC 18000-1:2008 | Information technology — Radio frequency identification for item management — Part 1: Reference architecture and definition of parameters to be standardized |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.