DEFSTAN 02-332/1(2005) : 2005

1 Scope
2 Warning
3 Normative References
4 Definitions
  4.1 For the purposes of this Standard the following
      definitions apply
5 Abbreviations
  5.1 For the purpose of this Standard the following
      abbreviations apply
6 Performance Specification
  6.1 General Requirements
  6.2 Main Feed System
  6.3 Main Steam System
  6.4 Auxiliary Steam System
  6.5 Steam Drain Systems
  6.6 National/International Regulations
  6.7 Pressure Equipment and Systems Safety Regulations
  6.8 Materials
  6.9 Lifting
7 Military Standards/Requirements
  7.1 System Requirements
      7.1.1 Maintenance Envelope
      7.1.2 Insulation/Lagging Requirements
      7.1.3 Cleaning, Painting and Preservation
      7.1.4 Oils and Greases
  7.2 Materials
  7.3 Valves
      7.3.1 Configuration Control
  7.4 Welding, Forging and Casting
  7.5 Environmental Considerations
  7.6 Testing
  7.7 Noise, Vibration and Shock Requirements
      7.7.1 Noise and Vibration
      7.7.2 Shock
8 Design Requirements/Guidance
  8.1 General Design Requirements
      8.1.1 System Design
      8.1.2 Manufacture and Installation
      8.1.3 Drawings
             8.1.3.1 General Drawings Requirements
             8.1.3.2 Equipment Drawings
      8.1.4 Pipework
             8.1.4.1 Materials for Pipes
             8.1.4.2 Fixtures and Supports
             8.1.4.3 Joining of Pipes
             8.1.4.4 Flexible Devices
             8.1.4.5 Bulkhead Penetrations
             8.1.4.5 Bulkhead Penetrations
      8.1.5 Valves
             8.1.5.1 Automatic Control Valves
             8.1.5.2 Power Operated Valves
      8.1.6 Instrumentation
  8.2 Feed System
      8.2.1 Main Feed System Design
      8.2.2 Main Feed System Arrangement
      8.2.3 Feed Flow-Meter
      8.2.4 Air Ejector and Glands Vapour Condenser
      8.2.5 Surge Tanks
      8.2.6 Tank Design
      8.2.7 Pumps
      8.2.8 Fluid Speeds in Pipework
      8.2.9 Pressure Losses in Pipework
      8.2.10 High Pressure Pipework
      8.2.11 Feed Systems Valves
      8.2.12 Steam Generator Feed Regulator
      8.2.13 Condenser Hotwell Level Control
      8.2.14 Feed Transfer System
      8.2.15 Demineraliser
  8.3 Steam Systems
      8.3.1 Steam System Design
      8.3.2 Pressure and Temperature
      8.3.3 Pipework
  8.4 Main Steam System
      8.4.1 Steam Flow-Meter
  8.5 Auxiliary Steam System
      8.5.1 Reduced Pressure Steam Systems
  8.6 Gland Steam System
  8.7 Steam Drain System
9 Corporate Experience & Knowledge
  9.1 Feed and Steam System Pressure Testing
  9.2 Feed System De-aerators
  9.3 Steam Systems
  9.4 Drain Systems