DEFSTAN 03-032(PT6)/5(2017) : 2017
Current
The latest, up-to-date edition.
PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 6: SYSTEMS FOR SPECIALISED VEHICLES, COMPONENTS AND SUBSTRATES INCLUDING DISTINCTIVE COLOURS
English
14-06-2017
0 Introduction
1 Scope
2 Warning
3 Normative References
4 Definitions
5 Procedures for protection at intermetallic contacts
and joints
6 Systems for Wood, Glass Reinforced Plastics and Canvas
7 Non-slip and non-skid coatings
8 Systems for underfloor protection of thin skinned vehicles
9 Specialist systems and treatment
10 Components requiring specialist treatments
11 Components requiring distinctive colours
12 Specialist medical vehicles
Annex A - Correlation between Def Stan 03-032/3 (Part 6) and
Def Stan 03-032/2 (Parts 6, 7, 8, 9, 10, 11 and 12)
Specifies the requirements for Specialised Vehicle, Components and Substrates including Distinctive Colours.
| DevelopmentNote |
Supersedes DEFSTAN 03-32(PT6)/4(2005). (07/2017)
|
| DocumentType |
Standard
|
| Pages |
33
|
| PublisherName |
UK Ministry of Defence Standards
|
| Status |
Current
|
| Supersedes |
| BS 381C:1996 | Specification for colours for identification, coding and special purposes |
| DEFSTAN 91-27/3(2003) : 2003 | GREASE, AUTOMOTIVE AND ARTILLERY NATO CODE: G-403 JOINT SERVICE DESIGNATION: XG-279 |
| DEFSTAN 80-209/3(2005) : 2005 | PAINT FINISHING, POLYURETHANE, MULTI-PACK, GLOSS, CHEMICAL AGENT RESISTANT, NON AIRCRAFT USE, LOW VOC |
| DEFSTAN 80-122/3(2008) : 2008 | POWDER COATING, HIGH DURABILITY, STOVING |
| DEFSTAN 03-24/5(2008) : 2008 | CHROMIC ACID ANODIZING OF ALUMINIUM AND ALUMINIUM ALLOYS |
| BS 7195(1989) : 1989 | GUIDE FOR PREVENTION OF CORROSION OF METALS CAUSED BY VAPOURS FROM ORGANIC MATERIALS |
| BS EN 636-1:1997 | Plywood. Specifications Requirements for plywood for use in dry conditions |
| DEFSTAN 80-213/2(2009) : 2009 | PAINT, FINISHING, POLYURETHANE, MULTI-PACK, ANTI-SLIP, FOR LAND VEHICLES, LOW VOC |
| BS 5599:1993 | Specification for hard anodic oxidation coatings on aluminium and its alloys for engineering purposes |
| SAE AMS03_25 | Sulfuric Acid Anodizing of Aluminum and Aluminum Alloys |
| SAE AMS03_11 | Phosphate Treatment of Iron and Steel |
| BS ISO 6344-1:1998 | Coated abrasives. Grain size analysis Grain size distribution test |
| DTD 369B : JUN 87 AMD 1 89 | PIGMENTED VARNISH JOINTING COMPOUND |
| SAE AMS 03-28-2 : 2017 | PHYSICAL VAPOR DEPOSITION OF METALS: PHYSICAL VAPOR DEPOSITION OF CADMIUM FOR PROTECTION AGAINST CORROSION |
| DEFSTAN 80-168/4(2012) : 2012 | COMPOUND, PROTECTIVE, FOR VEHICLE UNDERBODIES, WATER-BASED |
| DEFSTAN 80-97/5(2012) : 2012 | PAINT, SYSTEM, FOR THE INTERIOR OF BULK FUEL TANKS AND FITTINGS, MULTI-PACK |
| DEFSTAN 80-161/2(2002) : 2002 | PAINT, FINISHING, SPRAYING, EPOXY, MULTI-PACK |
| SAE AMS03_19 | Electro-Deposition of Cadmium |
| SAE AMS03_2A | Cleaning and Preparation of Metal Surfaces |
| SAE AMS03_4A | The Pre-Treatment and Protection of Steel Items of Specified Maximum Tensile Strength Exceeding 1450 MPa |
| SAE AMS03_18 | Chromate Conversion Coatings (Chromate Filming Treatments) Grades: Standard and Brushing for Aluminum and Aluminum Alloys |
| BS 2X 32:1998 | Specification for pre-treatment etch primer for aerospace purposes |
| BS 1336:1971 | Specification for knotting |
| BS 6338:1982 | Specification for chromate conversion coatings on electroplated zinc and cadmium coatings |
| SAE AMS03_20 | Electro-Deposition of Zinc |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.