DIN 28124-1:2010-09
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Manhole closures - Part 1: For unpressurized vessels
Available format(s)
Hardcopy , PDF
Language(s)
German
Published date
01-09-2010
Superseded date
25-06-2022
Superseded by
$127.64
Including GST where applicable
| DocumentType |
Standard
|
| Pages |
14
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| DIN 28122:2004-10 | Blank flanges with stainless steel facing, of nominal sizes DN 125 to DN 500 and PN designations PN 10 to PN 40 |
| DIN 28124-4:2010-09 | Manhole closures - Part 4: Swivel devices |
| DIN 28125-3:1989-04 | HINGED COVERS - CIRCULAR SHAPE WITH PROTECTION RING AND SURFACE COATED - DN 500 AND DN 600 |
| DIN 28125-1:1989-08 | DN 150 TO DN 600 ROUND HINGED CLOSURES |
| DIN 28125-2:1989-04 | HINGED COVERS - ELLIPTICAL, 350 MM X 450 MM |
| VDI 3478 Blatt 2:2008-04 | Biological waste gas purification - Biological trickle bed-reactors |
| DIN 28130:2007-07 | CHEMICAL EQUIPMENT - SURVEY ON COMPONENTS OF AGITATOR VESSELS WITH AGITATION UNIT |
| DIN 28031:2013-09 | Flange joints for process vessels - Weld flanges for unpressurized process vessels |
| DIN EN ISO 9445:2006-05 | CONTINUOUSLY COLD-ROLLED STAINLESS STEEL NARROW STRIP, WIDE STRIP, PLATE/SHEET AND CUT LENGTHS - TOLERANCES ON DIMENSIONS AND FORM |
| DIN EN 10029:2011-02 | Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape; German version EN 10029:2010 |
| DIN EN ISO 898-1:2013-05 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
| DIN EN 14879-1:2005-12 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate |
| DIN EN ISO 4034:2016-05 (Draft) | HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C (ISO 4034:2012) |
| DIN EN 10025-2:2011-04 (Draft) | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
| DIN 28030-1:2013-09 | Flange joints for process vessels - Part 1: Technical delivery conditions |
| DIN EN ISO 3506-1:2010-04 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
| DIN EN 1708-1:2010-05 | Welding - Basic welded joint details in steel - Part 1: Pressurized components |
| DIN 28124-4:2010-09 | Manhole closures - Part 4: Swivel devices |
| DIN 28125-2:1989-04 | HINGED COVERS - ELLIPTICAL, 350 MM X 450 MM |
| DIN 28040:2013-09 | Flange joints for process vessels - Flat gaskets |
| DIN EN ISO 3506-2:2010-04 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS |
| DIN 28125-1:1989-08 | DN 150 TO DN 600 ROUND HINGED CLOSURES |
| DIN 28030-2:2013-09 | Flange joints for process vessels - Part 2: Limit deviations for flanges |
| AD 2000-MERKBLATT A5 ANL1:2000 | DIRECTIVES FOR THE ARRANGEMENT OF MANHOLES AND INSPECTION PORTS |
| DIN 28125-3:1989-04 | HINGED COVERS - CIRCULAR SHAPE WITH PROTECTION RING AND SURFACE COATED - DN 500 AND DN 600 |
| DIN 28125 Beiblatt 1:1989-04 | Hinged covers; example for construction of a lifting aid |
| BGR 117-1 : 2008 | BEHAELTER, SILOS UND ENGE RAEUME - TEIL 1: ARBEITEN IN BEHAELTERN, SILOS UND ENGEN RAEUMEN |
| DIN EN 10058:2004-02 | HOT ROLLED FLAT STEEL BARS FOR GENERAL PURPOSES - DIMENSIONS AND TOLERANCES ON SHAPE AND DIMENSIONS |
| DIN 28091-1:2014-11 | TECHNICAL DELIVERY CONDITIONS FOR GASKET SHEETS - PART 1: GENERAL REQUIREMENTS FOR GASKET MATERIALS |
| DIN EN 1092-1:2016-05 (Draft) | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
Summarise
$127.64
Including GST where applicable
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.