DIN 3859-1:2005-09
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Compression couplings - Part 1: Technical delivery conditions
Available format(s)
Hardcopy , PDF
Language(s)
German, English
Published date
01-09-2005
Superseded date
10-01-2022
Superseded by
$159.69
Including GST where applicable
| DevelopmentNote |
Supersedes DIN 3859 (07/2002)
|
| DocumentType |
Standard
|
| Pages |
13
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| DIN 3913:2001-04 | Taper stud tees (stud run) for use with compression couplings (not to be used for new designs) |
| DIN 3867:1982-11 | NON-SOLDERING COMPRESSION COUPLINGS - PRESSURE BUSH FOR BUTT JOINTS |
| DIN 86552:2002-04 | VALVES, SCREWED BONNET TYPE OF STEEL FOR 24-DEGREE CONNECTION WITH PORT END W ACCORDING TO DIN 3861 |
| DIN 7643:2005-07 | COMPRESSION COUPLINGS - HOLLOW SCREWS FOR RING-TYPE BANJOS |
| DIN 3387-1:2008-11 | Separable unthreaded pipe connections for metal gas pipes - Part 1: Connections for pipes with smooth ends |
| DIN HDBK 174 : 6ED 2013 | |
| DGUV REGEL 113-020 : 2017 | HYDRAULIK-SCHLAUCHLEITUNGEN UND HYDRAULIK-FLUESSIGKEITEN - REGELN FUER DEN SICHEREN EINSATZ |
| DIN 3872:2012-02 | NON-SOLDERING COMPRESSION COUPLINGS - UNION NUTS FOR BUTT JOINTS |
| DIN 30690-1:2016-04 | CONSTRUCTION ELEMENTS IN THE GAS SUPPLY SYSTEM - PART 1: REQUIREMENTS FOR CONSTRUCTION ELEMENTS IN GAS SUPPLY SYSTEMS |
| DIN 7601:1998-02 | Compression couplings with ball-type nipples - Complete unions and survey |
| DIN 3861:2016-09 | NON-SOLDERING COMPRESSION FITTINGS - COMPRESSION RINGS - DESIGN |
| DIN 86501:2016-02 (Draft) | SCREWED BONNET TYPE VALVES, OF GUN METAL WITH 24 DEGREES CONNECTION FOR TYPE W PORT ACCORDING TO DIN 3861 |
| DIN 3867:2012-02 | NON-SOLDERING COMPRESSION COUPLINGS - PRESSURE BUSH FOR BUTT JOINTS |
| DIN HDBK 348 : 3ED 2015 | |
| DIN 3850:1998-12 | COMPRESSION FITTINGS - SUMMARY |
| DIN 3863:2003-08 | COMPRESSION COUPLINGS - SPHERICAL LINERS - DESIGN AND TYPES OF PORT END U AND Y |
| DIN 2353:2013-01 | NON-SOLDERING COMPRESSION FITTINGS WITH CUTTING RING - COMPLETE FITTINGS AND SURVEY |
| DIN EN 10216-1:2014-03 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| DIN EN 10087:1999-01 | FREE-CUTTING STEELS - TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, HOT ROLLED BARS AND RODS |
| DIN EN 12449:2015-11 (Draft) | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES |
| DIN ISO 6149-3:1996-11 | CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 3: LIGHT DUTY (L SERIES) STUD ENDS - DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS |
| DIN 3859-2:1999-07 | COMPRESSION COUPLINGS - PART 2: ASSEMBLY INSTRUCTION FOR NON-SOLDERING COMPRESSION COUPLINGS WITH CUTTING RINGS ACCORDING DIN 2353 AND DIN EN ISO 8434-1 |
| DIN ISO 6149-1:1996-11 | CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 1: PORTS WITH O-RING SEAL IN TRUNCATED HOUSING |
| DIN EN 10025-1:2011-04 (Draft) | Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version prEN 10025-1:2011 |
| DIN 158-1:1997-06 | METRIC EXTERNAL TAPER SCREW THREADS AND MATING INTERNAL PARALLEL SCREW THREADS - PART 1: NOMINAL SIZES, LIMIT DEVIATIONS, LIMITS OF SIZE AND VERIFICATION |
| DIN 475-1:2015-09 (Draft) | WIDTHS ACROSS FLATS FOR BOLTS, SCREWS, VALVES AND FITTINGS |
| DIN EN 12164:2015-12 (Draft) | COPPER AND COPPER ALLOYS - ROD FOR FREE MACHINING PURPOSES |
| DIN EN 764-1:2015-06 | PRESSURE EQUIPMENT - PART 1: VOCABULARY |
| DIN EN 10025-2:2011-04 (Draft) | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
| DIN 2353:2013-01 | NON-SOLDERING COMPRESSION FITTINGS WITH CUTTING RING - COMPLETE FITTINGS AND SURVEY |
| DIN 158-2:1997-06 | METRIC EXTERNAL TAPER SCREW THREAD AND MATING INTERNAL PARALLEL SCREW THREADS - PART 2: GAUGING SYSTEM, USE OF GAUGES, CALCULATION OF GAUGE DIMENSIONS AND GENERAL FEATURES |
| DIN EN 10222-5:2013-01 (Draft) | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 5: MARTENSITIC, AUSTENITIC AND AUSTENITIC-FERRITIC STAINLESS STEELS |
| DIN EN 10208-1:2009-07 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
| DIN 3850:1998-12 | COMPRESSION FITTINGS - SUMMARY |
| DIN 1652-4:1990-11 | BRIGHT STEEL MADE FROM STEEL FOR QUENCHING AND TEMPERING - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10263-4:2014-04 (Draft) | STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 4: TECHNICAL DELIVERY CONDITIONS FOR STEELS FOR QUENCHING AND TEMPERING |
| DIN ISO 965-1:2017-05 | ISO GENERAL PURPOSE METRIC SCREW THREADS - TOLERANCES - PART 1: PRINCIPLES AND BASIC DATA (ISO 965-1:2013) |
| DIN EN 10263-2:2014-04 (Draft) | STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 2: TECHNICAL DELIVERY CONDITIONS FOR STEELS NOT INTENDED FOR HEAT TREATMENT AFTER COLD WORKING |
| DIN ISO 6149-2:1996-11 | PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 2: HEAVY DUTY (S SERIES) STUD ENDS - DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS |
| DIN EN 12163:2015-12 (Draft) | COPPER AND COPPER ALLOYS - ROD FOR GENERAL PURPOSES |
| DIN EN 12420:2014-09 | Copper and copper alloys - Forgings |
| DIN EN 10305-1:2016-08 | STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES |
| DIN 20066:2016-11 (Draft) | HYDRAULIC FLUID POWER - HOSE ASSEMBLIES - DIMENSIONS, REQUIREMENTS |
| DIN 3859-3:1995-12 | NON-SOLDERING COMPRESSION COUPLINGS WITH CUTTING RINGS ACCORDING TO DIN 2353 - PART 3: TEST PROCEDURE |
| DIN EN ISO 8434-1:2016-10 (Draft) | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
Summarise
$159.69
Including GST where applicable
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.