DIN 46206-2:1971-06
Current
The latest, up-to-date edition.
SUPPLY-TERMINALS FOR ELECTRICAL EQUIPMENT >= 40 A, CONNECTIONS WITH RECTANGULAR CROSS-SECTION, BASIC DIMENSIONS AND COORDINATION
Hardcopy , PDF
German
01-01-1971
Kein Inhaltsverzeichnis in der Norm vorhanden.
Keine Zusammenfassung in der Norm vorhanden.
| DocumentType |
Standard
|
| Pages |
8
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| DIN VDE 0641-2 : 1984 | MINIATURE CIRCUIT BREAKERS UP TO 63 A RATED CURRENT, UP TO 440 V D.C. |
| DIN 57641-2 : 1984 | MINIATURE CIRCUIT BREAKERS UP TO 63 A RATED CURRENT, UP TO 440 V D.C. |
| DIN 43673-1:1982-02 | DRILLED HOLES AND SCREW CONNECTIONS FOR BUSBARS; RECTANGULAR CROSS SECTION BUSBARS |
| DIN VDE 0609-2 : 1983 | SCREW TERMINAL CLAMPING POINTS FOR CONNECTION OF COPPER CONDUCTORS UP TO 240 MM(HOCH)2 - CLAMPING POINTS WITH SELF-TAPPING SCREWS UP TO 16 MM(HOCH)2 |
| DIN 57609-1 : 1983 | SCREW TERMINAL CLAMPING POINTS FOR CONNECTION OF COPPER CONDUCTORS UP TO 240 MM[2]; GENERAL REQUIREMENTS |
| DIN 43675-3:1975-09 | RECTANGULAR-SECTION CONNECTORS FOR TERMINAL STUDS RATED OVER, 3150 A, FOR ALTERNATOR-BUSHINGS |
| DIN 43671:1975-12 | COPPER BUS BARS; DESIGN FOR CONTINUOUS CURRENT |
| DIN 57636-22 : 1984 | LOW-VOLTAGE FUSES - PART 22: H.R.C. FUSES; H.R.C. FUSES UP TO 1250 A AND 1000 V A.C. FOR PROTECTION OF EQUIPMENT |
| DIN 43670:1975-12 | ALUMINIUM BUS BARS; DESIGN FOR CONTINUOUS CURRENT |
| VDE 0641-2 : 1984 | MINIATURE CIRCUIT BREAKERS UP TO 63A RATED CURRENT, UP TO 440 V D.C. |
| VDE 0636-22 : 1984 | LOW-VOLTAGE FUSES - PART 22: H.R.C. FUSES; H.R.C. FUSES UP TO 1250 A AND 1000 V A.C. FOR PROTECTION OF EQUIPMENT |
| DIN 46235:1983-07 | CABLE LUGS, FOR COMPRESSION CONNECTIONS, COVER PLATE TYPE, FOR COPPER CONDUCTORS |
| DIN 46207:1971-06 | CONNECTIONS FOR ELECTRICAL DEVICES - SLEEVE TERMINALS AND SIDE OPENING SLEEVE TERMINALS - PRINCIPAL DIMENSIONS AND CORRELATION |
| DIN 43675-4:1977-07 | OCTAGON CONNECTORS FOR TERMINAL STUDS, RATED OVER 10000 A, FOR ALTERNATOR-BUSHINGS |
| VDE 0609-2 : 1983 | SCREW TERMINAL CLAMPING POINTS FOR CONNECTION OF COPPER CONDUCTORS UP TO 240 MM[2]; CLAMPING POINTS WITH SELF-TAPPING SCREWS UP TO 16 MM[2] |
| DIN 57636-21 : 1984 | LOW-VOLTAGE FUSES - PART 21: H.R.C. FUSES; PROTECTION OF CABLES AND CORDS UP TO 1250 A AND 500 V A.C., 440 V D.C. AND 660 V A.C. |
| DIN 57609-2 : 1983 | SCREW TERMINAL CLAMPING POINTS FOR CONNECTION OF COPPER CONDUCTORS UP TO 240 MM[2]; CLAMPING POINTS WITH SELF-TAPPING SCREWS UP TO 16 MM[2] |
| DIN VDE 0636-22 : 1984 | LOW-VOLTAGE FUSES - PART 22: H.R.C. FUSES - H.R.C. FUSES UP TO 1250 A AND 1000 V A.C. FOR PROTECTION OF EQUIPMENT |
| DIN 43620-3:1984-05 | LOW-VOLTAGE, HIGH-RUPTURING-CAPACITY FUSES WITH BLADE CONTACTS; LV HRC FUSE BASES FOR LV HRC FUSE LINKS FOR 500 AND 660 V A.C. AND 440 V D.C. |
| DIN 46234:1980-03 | TERMINAL ENDS FOR SOLDERLESS CONNECTIONS; RING TYPE, WITHOUT INSULATING SLEEVE, FOR COPPER CONDUCTORS |
| DIN 43675-1:1975-09 | RECTANGULAR-SECTION CONNECTORS FOR TERMINAL STUDS RATED BETWEEN 400 AND 3150 A FOR POWER TRANSFORMER- AND WALLBUSHINGS BELOW 60 KV |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.