DIN EN 13244-2 E : 2003

Foreword <br>Introduction<br>1 Scope<br>2 Normative references<br>3 Definitions, symbols and abbreviations<br>4 Material<br>&nbsp;&nbsp;&nbsp;4.1 Compound<br>&nbsp;&nbsp;&nbsp;4.2 Identification compound<br>5 General characteristics<br>&nbsp;&nbsp;&nbsp;5.1 Appearance<br>&nbsp;&nbsp;&nbsp;5.2 Colour<br>6 Geometrical characteristics<br>&nbsp;&nbsp;&nbsp;6.1 Measurement of dimensions<br>&nbsp;&nbsp;&nbsp;6.2 Mean outside diameters and out-of-roundness <br>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;(ovality)<br>&nbsp;&nbsp;&nbsp;6.3 Wall thicknesses and their tolerances<br>&nbsp;&nbsp;&nbsp;6.4 Coiled pipe<br>&nbsp;&nbsp;&nbsp;6.5 Pipe lengths<br>&nbsp;&nbsp;&nbsp;6.6 Pipe stiffness<br>7 Mechanical characteristics<br>&nbsp;&nbsp;&nbsp;7.1 Conditioning<br>&nbsp;&nbsp;&nbsp;7.2 Requirements<br>&nbsp;&nbsp;&nbsp;7.3 Retest in case of failure at 80 degrees C<br>8 Physical characteristics<br>&nbsp;&nbsp;&nbsp;8.1 Conditioning<br>&nbsp;&nbsp;&nbsp;8.2 Requirements<br>9 Chemical characteristics of pipes in contact with <br>&nbsp;&nbsp;&nbsp;chemicals<br>10 Performance requirements<br>11 Marking <br>&nbsp;&nbsp;&nbsp;11.1 General<br>&nbsp;&nbsp;&nbsp;11.2 Minimum required marking of pipes<br>Annex A (informative) Relationship between PN, MRS, S <br>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;and SDR<br>Annex B (normative) Pipe stiffness<br>Bibliography

Provides the characteristics of pipes made from polyethylene (PE) intended for buried and above-ground pressure systems for water for general purposes, drainage and sewerage.