DIN EN 60068-4:1996-10
Current
Current
The latest, up-to-date edition.
ENVIRONMENTAL TESTING - PART 4: INFORMATION FOR SPECIFICATION WRITERS - TEST SUMMARIES
Available format(s)
Hardcopy , PDF
Language(s)
German
Published date
01-01-1996
$282.51
Including GST where applicable
Vorwort
1 Zweck
2 Allgemeines
3 Begriffe
4 Übersicht der Zusammenfassungen für die Prüfungen
5 Liste der Leitfäden
6 Zusammenfassungen zu den Prüfungen
Summarizes information on individual environmental tests in order to serve purposes of specification writers and others when a detailed standard knowledge is not required. Not intended as a substitute for the complete standard.
| DevelopmentNote |
Supersedes DIN IEC 60068 SUPP1. (05/2003)
|
| DocumentType |
Standard
|
| Pages |
86
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN 60068-4 : 1996 | Identical |
| BS EN 60068-4:1996 | Identical |
| I.S. EN 60068-4:1997 | Identical |
| NBN EN 60068-4 : 1996 | Identical |
| EN 60068-4:1996 | Identical |
| IEC 60068-4:1987 | Identical |
| UNE-EN 60068-4:1997 | Identical |
| DIN EN 60068-2-70:1996-07 | ENVIRONMENTAL TESTING - PART 2: TESTS - TEST XB: ABRASION OF MARKINGS AND LETTERINGS CAUSED BY RUBBING OF FINGERS AND HANDS |
| DIN IEC 60068-2-21:1985-08 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TESTS; TEST U: ROBUSTNESS OF TERMINATIONS AND INTEGRAL MOUNTING DEVICES |
| DIN IEC 60068-2-49:1985-08 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; GUIDANCE TO TEST KC: SULPHUR DIOXIDE SO2 (HIGH CONCENTRATION) FOR ELECTRICAL CONTACTS AND CONNECTIONS CONNECTIONS |
| DIN EN 60068-2-57:2015-10 | ENVIRONMENTAL TESTING - PART 2-57: TESTS - TEST FF: VIBRATION - TIME-HISTORY AND SINE-BEAT METHOD (IEC 60068-2-57:2013) |
| DIN EN 60068-2-2 : 1995 | ENVIRONMENTAL TESTING - PART 2-2: TESTS - TEST B: DRY HEAT |
| DIN EN 60068-2-45:1994-02 | BASIC ENVIRONMENTAL TESTING PROCEDURES; PART 2: TESTS; TEST XA AND GUIDANCE: IMMERSION IN CLEANING SOLVENTS |
| DIN EN 60068-2-67:1996-07 | ENVIRONMENTAL TESTING - PART 2: TESTS - TEST CY: DAMP HEAT, STEADY STATE, ACCELERATED TEST PRIMARILY INTENDED FOR COMPONENTS |
| DIN EN 60068-2-44:1996-02 | ENVIRONMENTAL TESTING - PART 2: TESTS; GUIDANCE ON TEST T: SOLDERING |
| DIN IEC 60068-2-3:1986-12 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TESTS; TEST CA: DAMP HEAT, STEADY STATE |
| DIN IEC 60068-2-30:1986-09 | ELECTRICAL ENGINEERING - BASIC ENVIRONMENTAL TESTING PROCEDURES - TEST DB AND GUIDANCE - DAMP HEAT, CYCLIC (12 + 12 HOUR CYCLE) |
| DIN IEC 60068-2-20:1991-04 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TEST T: SOLDERING |
| DIN IEC 60068-2-28:1991-05 | ELECTRICAL ENGINEERING; ENVIRONMENTAL TESTING; GUIDANCE FOR DAMP HEAT TESTS |
| DIN IEC 60068-2-40:1985-08 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TESTS; TEST Z/AM: COMBINED COLD/LOW AIR PRESSURE TESTS |
| DIN EN 60068-2-68:1997-02 | ENVIRONMENTAL TESTING - PART 2: TESTS; TEST L: DUST AND SAND |
| DIN IEC 60068-2-46:1985-08 | ELECTRICAL ENGINEERING - BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - GUIDANCE TO TEST KD: HYDROGEN SULPHIDE H[2]S (HIGH CONCENTRATION) FOR ELECTRICAL CONTACTS AND CONNECTIONS |
| DIN 40046-24:1977-09 | ENVIRONMENTAL TESTING FOR ELECTRICAL ENGINEERING - TEST-GROUP F, TEST F[DB]: RANDOM VIBRATION WIDE BAND, REPRODUCIBILITY MEDIUM |
| DIN EN 60068-2-64 : 1995 | ENVIRONMENTAL TESTING - PART 2-64: TESTS - TEST FH: VIBRATION, BROADBAND RANDOM AND GUIDANCE |
| DIN IEC 60068-2-5:1982-11 | BASIC ENVIRONMENTAL TESTING PROCEDURES; PART 2: TESTS; TEST SA: SIMULATED SOLAR RADIATION AT GROUND LEVEL |
| DIN IEC 60068-2-58 : 1992 | ELECTRICAL ENGINEERING; ENVIRONMENTAL TESTING; TEST TD: SOLDERABILITY, RESISTANCE TO DISSOLUTION OF METALLIZATION AND TO SOLDERING HEAT OF SURFACE MOUNTING DEVIANCES (SMD) |
| DIN IEC 60068 Beiblatt 2:1983-03 | BASIC ENVIRONMENTAL TESTING PROCEDURES - LIST OF TERMS |
| DIN IEC 60068-2-33:1980-04 | BASIC ENVIRONMENTAL TESTING PROCEDURES; PART 2: TESTS, GUIDANCE ON CHANGE OF TEMPERATURE TESTS |
| DIN IEC 60068-2-39:1979-12 | BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 2: TESTS - TEST Z/AMD: COMBINED SEQUENTIAL COLD, LOW AIR PRESSURE AND DAMP HEAT TEST |
| DIN IEC 60068-2-11:1982-08 | BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 2: TESTS - TEST KA: SALT MIST |
| DIN IEC 60068-2-14:1987-06 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TESTS; TEST N: CHANGE OF TEMPERATURE |
| DIN EN 60068-2-6 : 1996 | ENVIRONMENTAL TESTING - PART 2-6: TESTS - TEST FC: VIBRATION (SINUSOIDAL) |
| DIN EN 60068-2-62:1995-08 | ENVIRONMENTAL TESTING - TEST METHODS - TEST EF: IMPACT, PENDULUM HAMMER |
| DIN IEC 60068-2-50:1985-08 | ELECTROTECHNICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TESTS; TEST Z/AFC: COMBINED COLD/VIBRATION (SINUSOIDAL); TESTS FOR BOTH-HEAT-DISSIPATING AND NON-HEAT-DISSIPATING SPECIMENS |
| DIN EN 60068-2-69 : 2007 | ENVIRONMENTAL TESTING - PART 2-69: TESTS - TEST TE/TC: SOLDERABILITY TESTING OF ELECTRONIC COMPONENTS AND PRINTED BOARDS BY THE WETTING BALANCE (FORCE MEASUREMENT) METHOD (IEC 60068-2-69:2017) |
| DIN EN 60068-2-17:1995-05 | Environmental testing - Part 2: Tests - Test Q: Sealing (IEC 60068-2-17:1994); German version EN 60068-2-17:1994 |
| DIN IEC 60068-2-10:1991-04 | ELECTRICAL ENGINEERING; ENVIRONMENTAL TESTING PROCEDURES TEST J AND GUIDANCE: MOULD GROWTH |
| DIN IEC 60068-2-43:1985-08 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TESTS; TEST KD: HYDROGEN SULPHIDE H2S (HIGH CONCENTRATION) FOR ELECTRICAL CONTACTS AND CONNECTIONS |
| DIN 40046-25:1977-09 | ENVIRONMENTAL TESTING FOR ELECTRICAL ENGINEERING - TEST-GROUP F, TEST F[DC]: RANDOM VIBRATION WIDE BAND, REPRODUCIBILITY LOW |
| DIN EN 60068-2-1 : 1995 | ENVIRONMENTAL TESTING - PART 2-1: TESTS - TEST A: COLD |
| DIN EN 60068-2-27 : 1995 | ENVIRONMENTAL TESTING - PART 2-27: TESTS - TEST EA AND GUIDANCE: SHOCK |
| DIN IEC 60068-3-1:1979-04 | BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 3: BACKGROUND INFORMATION - SECTION 1: COLD AND DRY HEAT TESTS |
| DIN IEC 60068-2-48:1984-02 | BASIC ENVIRONMENTAL TESTING PROCEDURES; PART 2: TESTS; GUIDANCE ON THE APPLICATION OF THE TESTS OF IEC PUBLICATION 60068 TO SIMULATE THE EFFECTS OF STORAGE |
| DIN IEC 60068-2-9:1987-02 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TESTS; GUIDANCE FOR SOLAR RADIATION TESTING |
| DIN EN 60068-1:2015-09 | ENVIRONMENTAL TESTING - PART 1: GENERAL AND GUIDANCE (IEC 60068-1:2013) |
| DIN EN 60068-2-32:1995-03 | BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 2: TESTS; TEST ED: FREE FALL |
| DIN EN 60068-2-60:2016-06 | ENVIRONMENTAL TESTING - PART 2-60: TESTS - TEST KE: FLOWING MIXED GAS CORROSION TEST (IEC 60068-2-60:2015) |
| DIN IEC 60068-2-53:1986-10 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; GUIDANCE TO TESTS Z/AFC AND Z/BFC: COMBINED TEMPERATURE (COLD AND DRY HEAT) AND VIBRATION (SINUSOIDAL) TESTS |
| DIN IEC 60068-5-2:1992-05 | ELECTRICAL ENGINEERING; ENVIRONMENTAL TESTING; GUIDE TO DRAFTING OF TEST METHODS; TERMS AND DEFINITIONS |
| DIN IEC 60068-2-56:1990-07 | ELECTRICAL ENGINEERING; ENVIRONMENTAL TESTING; TEST CB: DAMP HEAT, STEADY STATE, PRIMARILY FOR EQUIPMENT |
| DIN IEC 60068 Beiblatt 10:1985-08 | ELECTROTECHNIC - BASIC ENVIRONMENTAL TESTING PROCEDURES - GENERAL CONSIDERATIONS ON ULTRASONIC CLEANING |
| DIN EN 60068-2-7:1995-03 | BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 2: TESTS; TEST GA AND GUIDANCE: ACCELERATION, STEADY STATE |
| DIN EN 60068-2-47:2006-03 | ENVIRONMENTAL TESTING - PART 2-47: TESTS - MOUNTING OF SPECIMENS FOR VIBRATION, IMPACT AND SIMILAR DYNAMIC TESTS |
| DIN EN 60068-2-29:1995-03 | BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 2: TESTS; TEST EB AND GUIDANCE: BUMP |
| DIN EN 60068-2-61:1993-12 | ENVIRONMENTAL TESTING; PART 2: TEST METHODS; TEST Z/ABDM: CLIMATIC SEQUENCE |
| DIN IEC 60068-2-52:1985-07 | ELECTRONIC; BASIC ENVIRONMENTAL TESTING PROCEDURES; TESTS; TEST KB: SALT MIST, CYCLIC (SODIUM CHLORIDE SOLUTION) |
| DIN 40046-23:1977-09 | ENVIRONMENTAL TESTING FOR ELECTRICAL ENGINEERING - TEST-GROUP F, TEST F[DA]: RANDOM VIBRATION WIDE BAND, REPRODUCIBILITY HIGH |
| DIN IEC 60068-2-42:1985-08 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST KC - SULPHUR DIOXIDE SO[2] (HIGH CONCENTRATION) FOR ELECTRICAL CONTACTS AND CONNECTIONS |
| DIN IEC 60068-2-51:1985-08 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TESTS; TEST Z/BFC: COMBINED DRY HEAT/VIBRATION (SINUSOIDAL); TESTS FOR BOTH HEAT-DISSIPATING AND NON-HEAT-DISSIPATING SPECIMENS |
| DIN EN 60068-2-66:1995-06 | ENVIRONMENTAL TESTING - TEST METHODS - TEST CX: DAMP HEAT, STEADY STATE (UNSATURATED PRESSURIZED VAPOUR) |
| DIN IEC 60068-5-1:1994-02 | ENVIRONMENTAL TESTING; GUIDE TO DRAFTING OF TEST METHODS; GENERAL PRINCIPLES |
| DIN IEC 60068-3-3:1993-09 | Environmental testing; seismic test methods for equipments; guidance; identical with IEC 60068-3-3:1991 |
| DIN IEC 60068-2-41:1985-08 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TESTS; TEST Z/BM: COMBINED DRY HEAT/LOW AIR PRESSURE TESTS |
| DIN IEC 60068-2-13:1985-08 | ELECTRICAL ENGINEERING - BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST M: LOW AIR PRESSURE |
| DIN EN 60068-2-63:1995-03 | ENVIRONMENTAL TESTING - PART 2: TEST METHODS - TEST EG: IMPACT, SPRING HAMMER |
| DIN EN 60068-2-31:2009-04 | ENVIRONMENTAL TESTING - PART 2-31: TESTS - TEST EC: ROUGH HANDLING SHOCKS, PRIMARILY FOR EQUIPMENT-TYPE SPECIMENS |
| DIN EN 60068-2-59:1995-03 | ENVIRONMENTAL TESTING - PART 2: TESTS METHODS; TEST FE: VIBRATION, SINE BEAT METHOD |
| DIN EN 60068-2-65:2015-08 | ENVIRONMENTAL TESTING - PART 2-65: TESTS - TEST FG: VIBRATION - ACOUSTICALLY INDUCED METHOD (IEC 60068-2-65:2013) |
| DIN IEC 60068-3-2:1979-04 | BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 3: BACKGROUND INFORMATION - SECTION TWO: COMBINED TEMPERATURE/LOW AIR PRESSURE TESTS |
| DIN IEC 60068-2-54:1988-01 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TESTS T; SOLDERING; TEST TA; SOLDERABILITY TESTING BY THE WETTING BALANCE METHOD |
| DIN IEC 60068-2-18:1991-04 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TEST R AND GUIDANCE: WATER |
| DIN 40046-22 Beiblatt 1:1977-09 | ENVIRONMENTAL TESTING FOR ELECTRICAL ENGINEERING - TEST GROUP F, TEST F[D]: RANDOM VIBRATION WIDE BAND, GENERAL REQUIREMENTS |
| DIN EN 60068-2-55:2014-10 | ENVIRONMENTAL TESTING - PART 2-55: TESTS - TEST EE AND GUIDANCE - LOOSE CARGO TESTING INCLUDING BOUNCE (IEC 60068-2-55:2013) |
| DIN IEC 60068-2-38:1979-04 | BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 2: TESTS - TEST Z/AD: COMPOSITE TEMPERATURE/HUMIDITY, CYCLIC TEST |
Summarise
$282.51
Including GST where applicable
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.