DIN EN 60603-9:1998-07
Current
The latest, up-to-date edition.
CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 9: TWO-PART CONNECTORS FOR PRINTED BOARDS, BACKPANELS AND CABLE CONNECTORS, BASIC GRID OF 2,54 MM (0,1 IN)
Hardcopy , PDF
German
01-01-1998
Vorwort
Einführung
1 Anwendungsbereich
2 IEC-Normbezeichnung
3 Gemeinsame Merkmale
4 Masse
5 Lehren und Prüfplatte
6 Kennwerte
7 Prüfprogramm
Anhang ZA (normativ) Normative Verweisungen auf
internationale Publikationen mit ihren
entsprechenden europäischen Publikationen
Describes a group of related two-part connectors for printed boards and cable connectors, connected with printed backpanels. Describes high-density connectors with up to 96 miniature contacts for low-voltage applications.
| DevelopmentNote |
Supersedes DIN IEC 60603-9 (05/2002)
|
| DocumentType |
Standard
|
| Pages |
59
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN 60603-9 : 1998 | Identical |
| BS EN 60603-9:1998 | Identical |
| IEC 60603-9:1990 | Identical |
| EN 60603-9:1998 | Identical |
| NBN EN 60603-9 : 1998 | Identical |
| UNE-EN 60603-9:2001 | Identical |
| DIN IEC 60512-6:1994-05 | ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT; BASIC TESTING PROCEDURES AND MEASURING METHODS; PART 6: CLIMATIC TESTS AND SOLDERING TESTS |
| DIN EN 60097:1993-09 | Grid systems for printed circuits (IEC 60097:1991); German version EN 60097:1993 |
| DIN IEC 60326-7 : 1985 AMD 1 1994 | PRINTED BOARDS; PART 7: SPECIFICATION FOR SINGLE AND DOUBLE SIDED FLEXIBLE PRINTED BOARDS WITHOUT THROUGH CONNECTIONS |
| DIN IEC 60512-8:1994-05 | ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT; BASIC TESTING PROCEDURES AND MEASURING METHODS; PART 8: CONNECTOR TESTS (MECHANICAL) & MECHANICAL TESTS ON CONTACTS & TERMINATIONS |
| DIN IEC 60512-7:1994-05 | ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT; BASIC TESTING PROCEDURES AND MEASURING METHODS; PART 7: MECHANICAL OPERATING TESTS AND SEALING TESTS |
| DIN IEC 60512-2 : 1994 AMD 1 1995 | ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT; BASIC TESTING PROCEDURES AND MEASURING METHODS; PART 2: GENERAL EXAMINATION, ELECTRICAL CONTINUITY AND CONTACT RESISTANCE TESTS, INSULATION TESTS AND VOLTAGE STRESS TESTS |
| DIN IEC 60326-11:1993-04 | PRINTED BOARDS; SPECIFICATION FOR FLEX-RIGID MULTILAYER PRINTED BOARDS WITH THROUGH CONNECTIONS |
| DIN IEC 60326-3:1993-09 | PRINTED BOARDS - PART 3: DESIGN AND USE OF PRINTED BOARDS |
| DIN IEC 60194:1992-11 | PRINTED CIRCUITS; TERMS AND DEFINITION |
| DIN IEC 60326-10:1993-04 | PRINTED BOARDS; SPECIFICATION FOR FLEX-RIGID DOUBLE SIDED PRINTED BOARDS WITH THROUGH CONNECTIONS |
| DIN IEC 60326-1:1990-08 | PRINTED BOARDS - GENERAL INFORMATION FOR THE SPECIFICATION WRITER |
| DIN IEC 60326-5:1993-09 | PRINTED BOARDS - PART 5: SPECIFICATION FOR SINGLE AND DOUBLE SIDED PRINTED BOARDS WITH PLATED-THROUGH HOLES |
| DIN IEC 60512-4:1994-05 | ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT; BASIC TESTING PROCEDURES AND MEASURING METHODS; PART 4: DYNAMIC STRESS TESTS |
| DIN IEC 60326-4:1993-09 | PRINTED BOARDS - PART 4: SPECIFICATION FOR SINGLE AND DOUBLE SIDED PRINTED BOARDS WITH PLAIN HOLES |
| DIN IEC 60326-9:1993-04 | PRINTED BOARDS; SPECIFICATION FOR FLEXIBLE MULTILAYER PRINTED BOARDS WITH THROUGH CONNECTIONS |
| DIN IEC 60326-2 : 1992 AMD 1 1993 | PRINTED BOARDS; PART 2: TEST METHODS |
| DIN EN 60603-1:1998-07 | CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 1: GENERIC SPECIFICATION: GENERAL REQUIREMENTS AND GUIDE FOR THE PREPARATION OF DETAIL SPECIFICATIONS, WITH ASSESSED QUALITY |
| DIN IEC 60512-3:1994-05 | ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT; BASIC TESTING PROCEDURES AND MEASURING METHODS - PART 3: CURRENT-CARRYING CAPACITY TESTS |
| DIN IEC 60512-5:1994-05 | ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT; BASIC TESTING PROCEDURE AND MEASURING METHODS; PART 5: IMPACT TESTS (FREE COMPONENTS), STATIC LOAD TESTS (FIXED COMPONENTS), ENDURANCE TESTS AND OVERLOAD TESTS |
| DIN IEC 60326-8 : 1985 AMD 1 1994 | PRINTED BOARDS; SPECIFICATION FOR SINGLE AND DOUBLE SIDED FLEXIBLE PRINTED BOARDS WITH THROUGH CONNECTIONS |
| DIN IEC 60326-6:1994-07 | PRINTED BOARDS - PART 6: SPECIFICATION FOR MULTILAYER PRINTED BOARDS |
| DIN IEC 60512-9:1994-05 | ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT; BASIC TESTING PROCEDURES AND MEASURING METHODS; PART 9: MISCELLANEOUS TESTS |
| DIN EN 60352-1:1998-04 | SOLDERLESS CONNECTIONS - PART 1: WRAPPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.