DIN ISO 11529-2:2007-05
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
MILLING CUTTERS - DESIGNATION - PART 2: SHANK-TYPE AND BORE-TYPE MILLING CUTTERS WITH INDEXABLE INSERTS
Hardcopy , PDF
English
01-01-2007
01-10-2014
1 Anwendungsbereich
2 Normative Verweisungen
3 Zusammenstellung und Erläuterung des
Bezeichnungssystems
4 Bezeichnungssymbole
4.1 Bezeichnungssymbol für die Ausführung des
Fräswerkzeuges - Position 1
4.2 Bezeichnungssymbol für die Bauart
des Fräswerkzeuges - Position 2
4.3 Bezeichnungssymbol für den Einstellwinkel
kappa[r] - Position 3
4.4 Bezeichnungssymbol für die Form der
Wendeschneidplatte - Position 4
4.5 Bezeichnungssymbol für den Durchmesser
phi - Position 5
4.6 Bezeichnungssymbol für die
Schneidrichtung - Position 6
4.7 Bezeichnungssymbol für die maximale Schnitttiefe
oder Schnittbreite a[p] - Position 7
4.8 Bezeichnungssymbol für die Lage der Sitze für
Wendeschneidplatten bei Fräswerkzeugen - Position 8
4.9 Bezeichnungssymbol für die Anzahl der wirksamen
Schneiden - Position 9
4.10 Bezeichnungssymbol für die Form des Schaftes
oder der Bohrung - Position 10
4.10.1 Bezeichnungssymbol für die Form
des Schaftes
4.10.2 Bezeichnungssymbol für die Form
der Bohrung
4.11 Bezeichnungssymbol für die Grösse des Schaftes
oder der Bohrung - Position 11
5 Herstellerangaben
Defines a designation system for shank and bore type milling cutters embodying hard material indexable inserts, in order to simplify communication between users and suppliers of such tools.
| DevelopmentNote |
Supersedes DIN 8029-1 and DIN 8029-2. (02/2004)
|
| DocumentType |
Standard
|
| Pages |
13
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ISO 11529-2:2005 | Identical |
| ISO 297:1988 | 7/24 tapers for tool shanks for manual changing |
| ISO 3338-2:2013 | Cylindrical shanks for milling cutters — Part 2: Dimensional characteristics of flatted cylindrical shanks |
| ISO 3338-3:1996 | Cylindrical shanks for milling cutters — Part 3: Dimensional characteristics of threaded shanks |
| ISO 2940-1:1974 | Milling cutters mounted on centring arbors having a 7/24 taper — Fitting dimensions — Centring arbors |
| DIN 1830-4:1974-06 | INSERTED BLADE FACE MILLING CUTTERS FOR INTERNAL ALIGNMENT, FOR COMBINED MOUNTING ON SPINDLE-NOSES NO 50 AND 60 ACCORDING TO DIN 2079 |
| ISO 6462:2011 | Face and shoulder milling cutters with indexable inserts — Dimensions |
| ISO 3338-1:1996 | Cylindrical shanks for milling cutters — Part 1: Dimensional characteristics of plain cylindrical shanks |
| ISO 296:1991 | Machine tools — Self-holding tapers for tool shanks |
| DIN 138:2003-04 | METAL - CUTTING TOOLS - BORES, KEYWAYS AND DRIVING FEATURES FOR TOOLS WITH PARALLEL BORE AND 1 IN 30 TAPER BORE |
| ISO 7388-1:2007 | Tool shanks with 7/24 taper for automatic tool changers — Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF |
| DIN ISO 1832:2016-05 (Draft) | INDEXABLE INSERTS FOR CUTTING TOOLS - DESIGNATION (ISO 1832:2017) |
| ISO 240:2016 | Milling cutters — Interchangeability dimensions for cutter arbors or cutter mandrels |
| ISO 12164-1:2001 | Hollow taper interface with flange contact surface — Part 1: Shanks — Dimensions |
| ISO 1832:2017 | Indexable inserts for cutting tools — Designation |
| ISO 2780:2006 | Milling cutters with tenon drive — Interchangeability dimensions for cutter arbors — Metric series |
| DIN 2080-1:2011-11 | 7/24 taper shanks for tools and clamping devices - Part 1: Type A |
| DIN 8030-1:1984-01 | Face milling cutters for indexable inserts |
| DIN 1830-1:1974-06 | INSERTED BLADE FOR FACE MILLING CUTTERS FOR INTERNAL ALIGNMENT ON SPINDLE NOSES ACCORDING TO DIN 2079 |
| ISO 3002-3:1984 | Basic quantities in cutting and grinding — Part 3: Geometric and kinematic quantities in cutting |
| ISO 6986:2013 | Side and face milling (slotting) cutters with indexable inserts — Dimensions |
| DIN 2207:2001-07 | TOOL SHANKS FOR MILLING SPINDLE NOSES ACCORDING TO DIN 2201 - MATING DIMENSIONS |
| DIN 1835-1:1999-01 | Parallel shanks for milling cutters - Part 1: Dimensions |
| ISO 5413:1993 | Machine tools — Positive drive of Morse tapers |