EN 10130:2006

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Designation
5 Requirements
   5.1 Steelmaking and manufacturing processes
   5.2 Deoxidation
   5.3 Chemical composition
   5.4 Delivery conditions
   5.5 Mechanical properties
   5.6 Surface characteristics
        5.6.1 General
        5.6.2 Surface quality
        5.6.3 Surface finish
   5.7 Stretcher strain
        5.7.1 General
        5.7.2 Skin-passed products
        5.7.3 Non-skin-passed products
   5.8 Suitability for surface coating
   5.9 Weldability
   5.10 Tolerances on dimensions and shape
6 Tests
   6.1 General
   6.2 Inspection units
   6.3 Number of tests
   6.4 Sampling
   6.5 Test methods
   6.6 Re-tests
   6.7 Inspection document
7 Marking
8 Packing
9 Disputes
10 Information to be provided by the purchaser at the
   time of enquiry and order
Bibliography

This European Standard applies to cold rolled uncoated low carbon steel flat products in rolled widths equal to or over 600 mm for cold forming, with a minimum thickness of 0,35 mm and, unless otherwise agreed at the time of inquiry and order, equal to or less than 3 mm, delivered in sheet, coil, slit coil, or cut lengths obtained from slit coil or sheet.

It does not apply to cold rolled narrow strip (rolling width < 600 mm) nor to flat cold rolled products for which there is a specific standard, in particular the following:

cold rolled non-grain oriented magnetic steel sheet and strip (EN 10106);

semi-processed steel strip for the construction of magnetic circuits (EN 10126 and EN 10165);

blackplate in coils (EN 10205);

cold rolled flat products in high yield strength steels for cold forming (EN 10268);

cold rolled uncoated non-alloy mild steel narrow strip for cold forming (EN 10139);

cold rolled low carbon steel flat products for vitreous enamelling (EN 10209).