EN 14387:2004+A1:2008
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking
09-03-2021
23-01-2008
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Description
5 Classification
5.1 Types of filters
5.1.1 Gas filters
5.1.2 Multi-type gas filters
5.1.3 Combined filters
5.1.4 Special filters
5.2 Classes of filters
6 Requirements
6.1 General
6.2 Ergonomics
6.3 Design
6.4 Materials
6.5 Mass
6.6 Connection
6.7 Multiple filters
6.8 Packaging
6.9 Mechanical strength (M.S.)
6.10 Temperature conditioning (T.C.)
6.11 Breathing resistance
6.12 Gas capacity
6.12.1 General
6.12.2 Types A, B, E, K, AX and special filters
6.12.3 Type SX
6.13 Combined filters
6.13.1 General
6.13.2 Filter penetration
6.14 Clogging (optional)
6.14.1 General
6.14.2 Filter penetration
6.14.3 Breathing resistance
7 Testing
7.1 General
7.2 Nominal values and tolerances
7.3 Visual inspection
7.4 Mechanical strength (M.S.)
7.4.1 Test equipment
7.4.2 Test procedure
7.5 Temperature conditioning (T.C.)
7.6 Test flow conditions
7.6.1 General
7.6.2 Multiple filters
7.7 Breathing resistance
7.8 Gas capacity
7.8.1 General
7.8.2 Filters Type A, B, E and K
7.8.3 Filters Type AX
7.8.4 Special filters
7.8.5 Filters Type SX
7.9 Filter penetration
8 Marking
8.1 General
8.2 Filters
8.3 Filter package
9 Information supplied by the manufacturer
Annex ZA (informative) - Clauses of this European Standard
addressing essential requirements or other provisions
of EU Directives
This European Standard refers to gas filters and combined filters for use as components in unassisted respiratory protective devices.Filters for use against CO are excluded from this standard.Laboratory tests are included for the assessment of compliance with the requirements.Some filters complying with this standard can also be suitable for use with assisted respiratory protective devices and if so they need to be tested be tested and marked according to the appropriate European Standard.
Committee |
CEN/TC 79
|
DevelopmentNote |
Supersedes EN 141, EN 371 & EN 372. (06/2005) 2004 Edition Re-Issued in January 2008 & incorporates AMD 1 2008. (02/2008) Supersedes UNE EN 14387. (09/2008)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
SANS 54387 : 1ED 2007(R2014) | Identical |
NF EN 14387 : 2004 + A1 2008 | Identical |
DIN EN 14387:2008-05 | Identical |
UNI EN 14387 : 2008 | Identical |
UNE-EN 14387:2004 | Identical |
BS EN 14387 : 2004 | Identical |
I.S. EN 14387:2004 | Identical |
NS EN 14387 : 2004 + A1 2008 | Identical |
DIN EN 14387 E : 2008 | Identical |
NEN EN 14387 : 2004 + A1 2008 | Identical |
SN EN 14387 : 2004 + A1 2008 | Identical |
NBN EN 14387 : 2004 + A1 2008 | Identical |
PN EN 14387 : 2006 + A1 2010 | Identical |
UNE-EN 14387:2004+A1:2008 | Identical |
PREN 378-3 : DRAFT 2013 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 3: INSTALLATION SITE AND PERSONAL PROTECTION |
13/30291777 DC : 0 | BS EN 378-3 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 3: INSTALLATION SITE AND PERSONAL PROTECTION |
PREN 15695-1 : DRAFT 2015 | AGRICULTURAL TRACTORS AND SELF-PROPELLED SPRAYERS - PROTECTION OF THE OPERATOR (DRIVER) AGAINST HAZARDOUS SUBSTANCES - PART 1: CAB CLASSIFICATION, REQUIREMENTS AND TEST PROCEDURES |
17/30360256 DC : 0 | BS EN 15288-2 - SWIMMING POOLS - PART 2: SAFETY REQUIREMENTS FOR OPERATION |
UNE-EN 15695-1:2018 | Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 1: Cab classification, requirements and test procedures |
EN 378-3:2016 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection |
UNE-EN 1827:1999 | RESPIRATORY PROTECTIVE DEVICES. HALF MASKS WITHOUT INHALATION VALVES AND WITH SEPARABLE FILTERS TO PROTECT AGAINST GASES OR GASES AND PARTICLES OR PARTICLES ONLY. REQUIREMENTS, TESTING, MARKING |
ISO 11553-2:2007 | Safety of machinery Laser processing machines Part 2: Safety requirements for hand-held laser processing devices |
EN 12312-6:2017 | Aircraft ground support equipment - Specific requirements - Part 6: Deicers and de-icing/anti-icing equipment |
BS EN 15695-2:2017 | Agricultural tractors and self-propelled sprayers. Protection of the operator (driver) against hazardous substances Filters, requirements and test procedures |
15/30329404 DC : 0 | BS EN 15695-2 - AGRICULTURAL TRACTORS AND SELF-PROPELLED SPRAYERS - PROTECTION OF THE OPERATOR (DRIVER) AGAINST HAZARDOUS SUBSTANCES - PART 2: FILTERS, REQUIREMENTS AND TEST PROCEDURES |
08/30178266 DC : DRAFT SEP 2008 | BS EN 405 AMD1 - RESPIRATORY PROTECTIVE DEVICES - VALVED FILTERING HALF MASKS TO PROTECT AGAINST GASES OR GASES AND PARTICLES - REQUIREMENTS, TESTING, MARKING |
15/30329410 DC : 0 | BS EN 15695-1 - AGRICULTURAL TRACTORS AND SELF-PROPELLED SPRAYERS - PROTECTION OF THE OPERATOR (DRIVER) AGAINST HAZARDOUS SUBSTANCES - PART 1: CAB CLASSIFICATION, REQUIREMENTS AND TEST PROCEDURES |
S.R. CWA 16106:2010 | PPE FOR CHEMICAL, BIOLOGICAL, RADIOLOGICAL AND NUCLEAR, (CBRN) HAZARDS |
BS EN 15695-1:2017 | Agricultural tractors and self-propelled sprayers. Protection of the operator (driver) against hazardous substances Cab classification, requirements and test procedures |
EN 15695-2:2017 | Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2: Filters, requirements and test procedures |
ISO 16073:2011 | Wildland firefighting personal protective equipment Requirements and test methods |
BS EN 12312-6:2017 | Aircraft ground support equipment. Specific requirements Deicers and de-icing/anti-icing equipment |
I.S. EN 1827:1999 | RESPIRATORY PROTECTIVE DEVICES - HALF MASKS WITHOUT INHALATION VALVES AND WITH SEPARABLE FILTERS TO PROTECT AGAINST GASES OR GASES AND PARTICLES OR PARTICLES ONLY - REQUIREMENTS, TESTING, MARKING |
I.S. EN 405:2002 | RESPIRATORY PROTECTIVE DEVICES - VALVED FILTERING HALF MASKS TO PROTECT AGAINST GASES OR GASES AND PARTICLES - REQUIREMENTS, TESTING, MARKING |
I.S. EN 12312-6:2017 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 6: DEICERS AND DE-ICING/ANTI-ICING EQUIPMENT |
I.S. EN 378-3:2016 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 3: INSTALLATION SITE AND PERSONAL PROTECTION |
I.S. EN ISO 11553-2:2008 | SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 2: SAFETY REQUIREMENTS FOR HAND-HELD LASER PROCESSING DEVICES |
DIN EN 1827:2009-11 | Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking (includes Amendment A1:2009) |
VDI 3456:2009-12 | Emission control - Refinishing and finishing of vehicles |
DIN EN 15288-2:2009-05 | SWIMMING POOLS - PART 2: SAFETY REQUIREMENTS FOR OPERATION |
08/30178269 DC : 0 | BS EN 1827:1999/A1 - RESPIRATORY PROTECTIVE DEVICES - HALF MASKS WITHOUT INHALATION VALVES AND WITH SEPARABLE FILTERS TO PROTECT AGAINST GASES OR GASES AND PARTICLES OR PARTICLES ONLY - REQUIREMENTS, TESTING, MARKING |
07/30164820 DC : 0 | BS EN 15695-1 - AGRICULTURAL TRACTORS AND SELF-PROPELLED MACHINERY - PROTECTION AGAINST HAZARDOUS SUBSTANCES - PART 1: CAB CLASSIFICATION, REQUIREMENTS AND TEST PROCEDURES |
PREN 15695-2 : DRAFT 2015 | AGRICULTURAL TRACTORS AND SELF-PROPELLED SPRAYERS - PROTECTION OF THE OPERATOR (DRIVER) AGAINST HAZARDOUS SUBSTANCES - PART 2: FILTERS, REQUIREMENTS AND TEST PROCEDURES |
DIN EN 405 : 2009-08 | RESPIRATORY PROTECTIVE DEVICES - VALVED FILTERING HALF MASKS TO PROTECT AGAINST GASES OR GASES AND PARTICLES - REQUIREMENTS, TESTING, MARKING |
DIN EN ISO 11553-2:2009-03 | SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 2: SAFETY REQUIREMENTS FOR HAND-HELD LASER PROCESSING DEVICES |
UNE-EN 378-3:2017 | Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection |
UNI EN 1827 : 2009 | RESPIRATORY PROTECTIVE DEVICES - HALF MASKS WITHOUT INHALATION VALVES AND WITH SEPARABLE FILTERS TO PROTECT AGAINST GASES OR GASES AND PARTICLES OR PARTICLES ONLY - REQUIREMENTS, TESTING, MARKING |
UNI EN 405 : 2009 | RESPIRATORY PROTECTIVE DEVICES - VALVED FILTERING HALF MASKS TO PROTECT AGAINST GASES OR GASES AND PARTICLES - REQUIREMENTS, TESTING, MARKING |
UNI EN ISO 11553-2 : 2009 | SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 2: SAFETY REQUIREMENTS FOR HAND-HELD LASER PROCESSING DEVICES |
BS EN 15288-2:2008 | Swimming pools Safety requirements for operation |
UNE-EN 12312-6:2017 | Aircraft ground support equipment - Specific requirements - Part 6: Deicers and de-icing/anti-icing equipment |
07/30164823 DC : 0 | BS EN 15695-2 - AGRICULTURAL TRACTORS AND SELF-PROPELLED MACHINERY - PROTECTION AGAINST HAZARDOUS SUBSTANCES - PART 2: AIR PURIFYING DEVICES |
UNE-EN 15695-2:2010 | Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2: Filters, requirements and test procedures |
I.S. EN 15288-2:2008 | SWIMMING POOLS - PART 2: SAFETY REQUIREMENTS FOR OPERATION |
BS ISO 16073:2011 | Wildland firefighting personal protective equipment. Requirements and test methods |
EN 15288-2:2008 | Swimming pools - Part 2: Safety requirements for operation |
UNI EN 15288-2 : 2009 | SWIMMING POOLS - PART 2: SAFETY REQUIREMENTS FOR OPERATION |
BS EN 529:2005 | Respiratory protective devices. Recommendations for selection, use, care and maintenance. Guidance document |
BS EN 405 : 2002 | RESPIRATORY PROTECTIVE DEVICES - VALVED FILTERING HALF MASKS TO PROTECT AGAINST GASES OR GASES AND PARTICLES - REQUIREMENTS, TESTING, MARKING |
BS EN ISO 11553-2:2008 | Safety of machinery. Laser processing machines Safety requirements for hand-held laser processing devices |
BS EN 378-3:2016 | Refrigerating systems and heat pumps. Safety and environmental requirements Installation site and personal protection |
EN 1827:1999+A1:2009 | Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking |
EN 405:2001+A1:2009 | Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking |
EN ISO 11553-2:2008 | Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing devices (ISO 11553-2:2007) |
I.S. EN 15695-2:2017 | AGRICULTURAL TRACTORS AND SELF-PROPELLED SPRAYERS - PROTECTION OF THE OPERATOR (DRIVER) AGAINST HAZARDOUS SUBSTANCES - PART 2: FILTERS, REQUIREMENTS AND TEST PROCEDURES |
BS ISO 16972:2010 | Respiratory protective devices. Terms, definitions, graphical symbols and units of measurement |
ISO 16972:2010 | Respiratory protective devices Terms, definitions, graphical symbols and units of measurement |
I.S. EN 15695-1:2017 | AGRICULTURAL TRACTORS AND SELF-PROPELLED SPRAYERS - PROTECTION OF THE OPERATOR (DRIVER) AGAINST HAZARDOUS SUBSTANCES - PART 1: CAB CLASSIFICATION, REQUIREMENTS AND TEST PROCEDURES |
EN 15695-1:2017 | Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 1: Cab classification, requirements and test procedures |
BS EN 1827 : 1999 | RESPIRATORY PROTECTIVE DEVICES - HALF MASKS WITHOUT INHALATION VALVES AND WITH SEPARABLE FILTERS TO PROTECT AGAINST GASES OR GASES AND PARTICLES OR PARTICLES ONLY - REQUIREMENTS, TESTING, MARKING |
EN 529:2005 | Respiratory protective devices - Recommendations for selection, use, care and maintenance - Guidance document |
DIN EN 529:2006-01 | Respiratory protective devices - Recommendations for selection, use, care and maintenance - Guidance document |
EN 13274-7:2008 | Respiratory protective devices - Methods of test - Part 7: Determination of particle filter penetration |
EN 148-3:1999 | Respiratory protective devices - Threads for facepieces - Part 3: Tread connection M 45 x 3 |
89/686/EEC : 1989 AMD 5 2012 | COUNCIL DIRECTIVE OF 21 DECEMBER 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO PERSONAL PROTECTIVE EQUIPMENT |
EN 132:1998 | Respiratory protective devices - Definitions of terms and pictograms |
EN 13274-3:2001 | Respiratory protective devices - Methods of test - Part 3: Determination of breathing resistance |
EN 134:1998 | Respiratory protective devices - Nomenclature of components |
EN 143:2000/A1:2006 | RESPIRATORY PROTECTIVE DEVICES - PARTICLE FILTERS - REQUIREMENTS, TESTING, MARKING |
EN 148-2:1999 | Respiratory protective devices - Threads for facepieces - Part 2: Centre thread connection |
EN 13274-5:2001 | Respiratory protective devices - Methods of test - Part 5: Climatic conditions |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.