EN 14429:2015
Current
The latest, up-to-date edition.
Characterization of waste - Leaching behaviour test - Influence of pH on leaching with initial acid/base addition
25-03-2015
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Principle
6 Reagents
7 Equipment
8 Sample preparation
9 Procedure
Annex A (informative) - Example of a data sheet
Annex B (informative) - Operation and uses of the test - Influence
of pH on the leaching Behaviour
Annex C (informative) - Preliminary determination of the acid/base
consumption
Annex D (informative) - Examples of acid and base neutralization
capacities for waste, soil, sediment and construction
materials
Annex E (informative) - Repeatability and reproducibility data
Bibliography
This European Standard specifies a method for the determination of the influence of pH on the leachability of inorganic constituents from a waste material. The equilibrium condition as defined in the standard is established by addition of pre-determined amounts of acid or base to reach desired end pH values. This test method produces eluates, which are subsequently characterized physically and chemically.This European Standard is a parameter specific test as specified in EN 12920. The application of this test method alone is not sufficient for the determination of the detailed leaching behaviour of a waste under specified conditions.
| Committee |
CEN/TC 444
|
| DevelopmentNote |
Supersedes PREN 14429 & CEN/TS 14429. (04/2015)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| DIN EN 14429:2015-05 | Identical |
| BS EN 14429:2015 | Identical |
| NEN EN 14429 : 2015 | Identical |
| NBN EN 14429 : 2015 | Identical |
| I.S. EN 14429:2015 | Identical |
| NF EN 14429 : 2015 | Identical |
| PN EN 14429 : 2015 | Identical |
| NS EN 14429 : 2015 | Identical |
| UNE-EN 14429:2015 | Identical |
| DIN EN 14997:2015-05 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST - INFLUENCE OF PH ON LEACHING WITH CONTINUOUS PH CONTROL |
| BS EN 14405:2017 | Characterization of waste - Leaching behaviour test - Up-flow percolation test (under specified conditions) |
| DIN EN 15863:2015-06 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST FOR BASIC CHARACTERIZATION - DYNAMIC MONOLITHIC LEACHING TEST WITH PERIODIC LEACHANT RENEWAL, UNDER FIXED CONDITIONS |
| EN 14997:2015 | Characterization of waste - Leaching behaviour test - Influence of pH on leaching with continuous pH control |
| EN 14405:2017 | Characterization of waste - Leaching behaviour test - Up-flow percolation test (under specified conditions) |
| EN 15863:2015 | Characterization of waste - Leaching behaviour test for basic characterization - Dynamic monolithic leaching test with periodic leachant renewal, under fixed conditions |
| PD CEN/TS 15864:2012 | Characterisation of waste. Leaching behaviour test for basic characterisation. Dynamic monolithic leaching test with continuous leachant renewal under conditions relevant for specified scenario(s) |
| PD CEN/TS 16660:2015 | Characterization of waste. Leaching behaviour test. Determination of the reducing character and the reducing capacity |
| DIN EN 14405:2017-05 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST - UP-FLOW PERCOLATION TEST (UNDER SPECIFIED CONDITIONS) |
| I.S. EN 15863:2015 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST FOR BASIC CHARACTERIZATION - DYNAMIC MONOLITHIC LEACHING TEST WITH PERIODIC LEACHANT RENEWAL, UNDER FIXED CONDITIONS |
| I.S. EN 14405:2017 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST - UP-FLOW PERCOLATION TEST (UNDER SPECIFIED CONDITIONS) |
| S.R. CEN/TS 15864:2015 | CHARACTERISATION OF WASTE - LEACHING BEHAVIOUR TEST FOR BASIC CHARACTERIZATION - DYNAMIC MONOLITHIC LEACHING TEST WITH CONTINUOUS LEACHANT RENEWAL UNDER CONDITIONS RELEVANT FOR SPECIFIED SCENARIO(S) |
| BS EN 15863:2015 | Characterization of waste. Leaching behaviour test for basic characterization. Dynamic monolithic leaching test with periodic leachant renewal, under fixed conditions |
| BS EN 14997:2015 | Characterization of waste. Leaching behaviour test. Influence of pH on leaching with continuous pH control |
| S.R. CEN/TS 16660:2015 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST - DETERMINATION OF THE REDUCING CHARACTER AND THE REDUCING CAPACITY |
| I.S. EN 14997:2015 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST - INFLUENCE OF PH ON LEACHING WITH CONTINUOUS PH CONTROL |
| CEN/TS 15864:2015 | Characterization of waste - Leaching behaviour test for basic characterization - Dynamic monolithic leaching test with continuous leachant renewal under conditions relevant for specified scenario(s) |
| CEN/TS 16660:2015 | Characterization of waste - Leaching behaviour test - Determination of the reducing character and the reducing capacity |
| UNE-EN 15863:2015 | Characterization of waste - Leaching behaviour test for basic characterization - Dynamic monolithic leaching test with periodic leachant renewal, under fixed conditions |
| UNE-EN 14405:2017 | Characterization of waste - Leaching behaviour test - Up-flow percolation test (under specified conditions) |
| UNE-EN 14997:2015 | Characterization of waste - Leaching behaviour test - Influence of pH on leaching with continuous pH control |
| EN 14997:2015 | Characterization of waste - Leaching behaviour test - Influence of pH on leaching with continuous pH control |
| EN 14346:2006 | Characterization of waste - Calculation of dry matter by determination of dry residue or water content |
| ISO 5667-3:2012 | Water quality — Sampling — Part 3: Preservation and handling of water samples |
| EN 12457-1:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction) |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| EN 16192:2011 | Characterization of waste - Analysis of eluates |
| EN ISO 5667-3:2012 | Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO 5667-3:2012) |
| ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
| EN 12920:2006+A1:2008 | Characterization of waste - Methodology for the determination of the leaching behaviour of waste under specified conditions |
| EN ISO 3696:1995 | Water for analytical laboratory use - Specification and test methods (ISO 3696:1987) |
| EN 15002:2015 | Characterization of waste - Preparation of test portions from the laboratory sample |
| EN 14899:2005 | Characterization of waste - Sampling of waste materials - Framework for the preparation and application of a Sampling Plan |