• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN 14483-2 : 2004

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION - PART 2: DETERMINATION OF RESISTANCE TO CHEMICAL CORROSION BY BOILING ACIDS, NEUTRAL LIQUIDS AND/OR THEIR VAPOURS
Superseded date

01-05-2011

Published date

12-01-2013

Foreword
Introduction
1 Scope
2 Normative references
3 Principle
4 Reagents
5 Apparatus and materials
   5.1 Test apparatus
        5.1.1 General description
   5.2 Drying oven, capable of maintaining temperatures
        of at least 130 degree C
   5.3 Desiccator, for example with an internal diameter
        of 200 mm
   5.4 Graduated measuring cylinder, capacity 500 ml,
        conforming to the requirements of ISO 4788
   5.5 Beakers
   5.6 Balance, capable of weighing to the nearest to 0,2
        10[-3] g
   5.7 Sponge, soft
   5.8 Graduated hydrometer, conforming to the requirements
        of ISO 649-1
6 Packing rings
   6.1 General
   6.2 Packing A
   6.3 Packing B
7 Test specimens
8 Procedure
9 Expression of results
   9.1 Total loss in mass per unit area
   9.2 Corrosion rate
10 Boiling citric acid
   10.1 General
   10.2 Citric acid test solution
   10.3 Duration of the test
   10.4 Test report
11 Boiling sulfuric acid
   11.1 General
   11.2 Test solution
   11.3 Duration of the test
   11.4 Test report
12 Boiling hydrochloric acid
   12.1 General
   12.2 Test solution
   12.3 Duration of the test
   12.4 Test report
13 Boiling distilled or demineralized water
   13.1 General
   13.2 Test solution
   13.3 Duration of the test
   13.4 Test report
14 Other test solutions and/or conditions
   14.1 General
   14.2 Test solution
   14.3 Duration of the test
   14.4 Test report
Bibliography

Describes a test method for the determination of the resistance of flat surfaces of vitreous and porcelain enamels to boiling acids, neutral liquids, and/or their vapours.

Committee
TC 262
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy

I.S. EN 15159-2:2006 VITREOUS AND PORCELAIN ENAMELS - GLASS-LINED APPARATUS FOR PROCESS PLANTS - PART 2: DESIGNATION AND SPECIFICATION OF RESISTANCE TO CHEMICAL ATTACK AND THERMAL SHOCK
PREN ISO 28763 : DRAFT 2010 VITREOUS AND PORCELAIN ENAMELS - REGENERATIVE, ENAMELLED AND PACKED PANELS FOR AIR-GAS AND GAS-GAS HEAT EXCHANGERS - SPECIFICATIONS
07/30169188 DC : 0 BS ISO 28721-2 - VITREOUS AND PORCELAIN ENAMELS - GLASS-LINED APPARATUS FOR PROCESS PLANTS - PART 2: DESIGNATION AND SPECIFICATION OF RESISTANCE TO CHEMICAL ATTACK AND THERMAL SHOCK
05/30136043 DC : DRAFT JUL 2005 EN 15282 - VITREOUS AND PORCELAIN ENAMELS - DESIGN OF VITREOUS ENAMEL COATED BOLTED STEEL TANKS FOR THE STORAGE OR TREATMENT OF WATER OR MUNICIPAL OR INDUSTRIAL EFFLUENTS
I.S. EN 15711:2009 VITREOUS AND PORCELAIN ENAMELS - GLASS LINED FLANGED STEEL PIPES AND FLANGED STEEL FITTINGS - QUALITY REQUIREMENTS
DIN EN 14866:2006-03 VITREOUS AND PORCELAIN ENAMELS - REGENERATIVE, ENAMELLED AND PACKED PANELS FOR AIR-GAS AND GAS-GAS HEAT EXCHANGERS - SPECIFICATIONS
DIN EN 15711:2009-08 VITREOUS AND PORCELAIN ENAMELS - GLASS LINED FLANGED STEEL PIPES AND FLANGED STEEL FITTINGS - QUALITY REQUIREMENTS
I.S. EN 14866:2006 VITREOUS AND PORCELAIN ENAMELS - REGENERATIVE, ENAMELLED AND PACKED PANELS FOR AIR-GAS AND GAS-GAS HEAT EXCHANGERS - SPECIFICATIONS
07/30169136 DC : 0 BS ISO 28763 - VITREOUS AND PORCELAIN ENAMELS - REGENERATIVE, ENAMELLED AND PACKED PANELS FOR AIR-GAS AND GAS-GAS HEAT EXCHANGERS - SPECIFICATIONS
10/30232007 DC : 0 BS EN ISO 28765 - VITREOUS AND PORCELAIN ENAMELS - DESIGN OF BOLTED STEEL TANKS FOR THE STORAGE OR TREATMENT OF WATER OR MUNICIPAL OR INDUSTRIAL EFFLUENTS AND SLUDGES
BS EN 15711:2009 Vitreous and porcelain enamels. Glass lined flanged steel pipes and flanged steel fittings. Quality requirements
07/30169151 DC : 0 BS ISO 28765 - VITREOUS AND PORCELAIN ENAMELS - DESIGN OF BOLTED STEEL TANKS FOR THE STORAGE OR TREATMENT OF WATER OR MUNICIPAL OR INDUSTRIAL EFFLUENTS AND SLUDGES
09/30197538 DC : 0 BS ISO 12778 - VITREOUS AND PORCELAIN ENAMELS - GLASS LINED FLANGED STEEL PIPES AND FLANGED STEEL FITTINGS - QUALITY REQUIREMENTS
05/30130126 DC : DRAFT FEB 2005 EN 15159-2 - VITREOUS AND PORCELAIN ENAMELS - GLASS-LINED APPARATUS FOR PROCESS PLANTS - PART 2: QUALITY REQUIREMENTS
03/321262 DC : DRAFT DEC 2003 PREN 14866 - REGENERATIVE, PACKED ENAMELLED HEAT EXCHANGERS FOR AIR-GAS AND GAS-GAS HEATERS - SPECIFICATION
07/30166946 DC : DRAFT AUG 2007 BS EN 15711 - VITREOUS AND PORCELAIN ENAMELS - GLASS LINED FLANGED STEEL PIPES AND FLANGED STEEL FITTINGS - QUALITY REQUIREMENTS
10/30231999 DC : 0 BS EN ISO 28763 - VITREOUS AND PORCELAIN ENAMELS - REGENERATIVE, ENAMELLED AND PACKED PANELS FOR AIR-GAS AND GAS-GAS HEAT EXCHANGERS - SPECIFICATIONS
UNE-EN 15711:2010 Vitreous and porcelain enamels - Glass lined flanged steel pipes and flanged steel fittings - Quality requirements
I.S. EN 13834:2009 COOKWARE - OVENWARE FOR USE IN TRADITIONAL DOMESTIC OVENS
ONORM EN 13834 : 2009 COOKWARE - OVENWARE FOR USE IN TRADITIONAL DOMESTIC OVENS
UNI EN 13834 : 2009 COOKWARE - OVENWARE FOR USE IN TRADITIONAL DOMESTIC OVENS
UNI EN 15711 : 2009 VITREOUS AND PORCELAIN ENAMELS - GLASS LINED FLANGED STEEL PIPES AND FLANGED STEEL FITTINGS - QUALITY REQUIREMENTS
I.S. EN 15282:2007 VITREOUS AND PORCELAIN ENAMELS - DESIGN OF BOLTED STEEL TANKS FOR THE STORAGE OR TREATMENT OF WATER OR MUNICIPAL OR INDUSTRIAL EFFLUENTS AND SLUDGES
BS EN 15159-2:2006 Vitreous and porcelain enamels. Glass-lined apparatus for process plants Designation and specification of resistance to chemical attack and thermal shock
BS EN 15282:2007 Vitreous and porcelain enamels. Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges
BS EN 13834 : 2007 COOKWARE - OVENWARE FOR USE IN TRADITIONAL DOMESTIC OVENS
BS EN 14866:2005 Vitreous and porcelain enamels. Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers. Specifications
EN 15159-2:2006 Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 2: Designation and specification of resistance to chemical attack and thermal shock
EN 15282:2007 Vitreous and porcelain enamels - Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges
EN 15711:2009 Vitreous and porcelain enamels - Glass lined flanged steel pipes and flanged steel fittings - Quality requirements
EN 14866:2005 Vitreous and porcelain enamels - Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers - Specifications
DIN EN 15711 E : 2009 VITREOUS AND PORCELAIN ENAMELS - GLASS LINED FLANGED STEEL PIPES AND FLANGED STEEL FITTINGS - QUALITY REQUIREMENTS
DIN EN 15282:2007-06 VITREOUS AND PORCELAIN ENAMELS - DESIGN OF BOLTED STEEL TANKS FOR THE STORAGE OR TREATMENT OF WATER OR MUNICIPAL OR INDUSTRIAL EFFLUENTS AND SLUDGES
DIN EN 13834:2009-07 COOKWARE - OVENWARE FOR USE IN TRADITIONAL DOMESTIC OVENS

ISO 2723:1995 Vitreous and porcelain enamels for sheet steel Production of specimens for testing
ISO 3585:1998 Borosilicate glass 3.3 Properties
ISO 4788:2005 Laboratory glassware Graduated measuring cylinders
ISO 718:1990 Laboratory glassware — Thermal shock and thermal shock endurance — Test methods
ISO 2724:1973 Vitreous and porcelain enamels for cast iron Production of specimens for testing
ISO 4799:1978 Laboratory glassware Condensers
EN ISO 3696:1995 Water for analytical laboratory use - Specification and test methods (ISO 3696:1987)
ISO 48:2010 Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD)
ISO 13804:1999 Vitreous and porcelain enamels for aluminium Production of specimens for testing
ISO 649-1:1981 Laboratory glassware — Density hydrometers for general purposes — Part 1: Specification
ISO 1629:2013 Rubber and latices — Nomenclature

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more